diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL')
2 files changed, 214 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch new file mode 100644 index 0000000..f63f161 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch @@ -0,0 +1,43 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<launchConfiguration type="com.atollic.hardwaredebug.launch.launchConfigurationType"> +<stringAttribute key="com.atollic.hardwaredebug.launch.analyzeCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers # Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode #monitor flash set_parallelism_mode 2 # Load the program executable load # Reset to known state monitor reset # Start the executable. continue"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.enable_swv" value="false"/> +<intAttribute key="com.atollic.hardwaredebug.launch.formatVersion" value="2"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.initCommands" value=""/> +<stringAttribute key="com.atollic.hardwaredebug.launch.ipAddress" value="localhost"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.jtagDevice" value="ST-LINK"/> +<intAttribute key="com.atollic.hardwaredebug.launch.portNumber" value="61234"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.remoteCommand" value="target extended-remote"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.runCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers # Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode #monitor flash set_parallelism_mode 2 # Load the program executable load # Set a breakpoint at main(). tbreak main # Reset to known state monitor reset # Run to the breakpoint. continue"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.serverParam" value="-p 61234 -l 1 -d"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.startServer" value="true"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.swd_mode" value="true"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.swv_port" value="61235"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_div" value="8"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.swv_trace_hclk" value="8000000"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.swv_wait_for_sync" value="true"/> +<booleanAttribute key="com.atollic.hardwaredebug.launch.useRemoteTarget" value="true"/> +<stringAttribute key="com.atollic.hardwaredebug.launch.verifyCommands" value="# Set flash parallelism mode to 32, 16, or 8 bit when using STM32 F2/F4 microcontrollers # Uncomment next line, 2=32 bit, 1=16 bit and 0=8 bit parallelism mode #monitor flash set_parallelism_mode 2 # Load the program executable load # Set a breakpoint at main(). tbreak main # Reset to known state monitor reset # Run to the breakpoint. continue"/> +<booleanAttribute key="com.atollic.hardwaredebug.stlink.enable_logging" value="false"/> +<stringAttribute key="com.atollic.hardwaredebug.stlink.log_file" value="C:\VSS\BARRACUDA\INTRODUCTION PACKAGE\FIRMWARE\STM32_USB-FS-Device_Lib\Project\Virtual_COM_Port\TrueSTUDIO\STM32L152-EVAL\Debug\st-link_gdbserver_log.txt"/> +<booleanAttribute key="com.atollic.hardwaredebug.stlink.verify_flash" value="false"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard (Windows)"/> +<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> +<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> +<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="${TOOLCHAIN_PATH}/arm-atollic-eabi-gdb"/> +<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> +<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> +<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/> +<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> +<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="Debug/STM32L152-EVAL.elf"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="STM32L152-EVAL"/> +<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> +<listEntry value="/STM32L152-EVAL"/> +</listAttribute> +<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> +<listEntry value="4"/> +</listAttribute> +</launchConfiguration> diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL/stm32_flash.ld new file mode 100644 index 0000000..1be62d5 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/VirtualComport_Loopback/TrueSTUDIO/STM32L152-EVAL/stm32_flash.ld @@ -0,0 +1,171 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for stm32l1xx_md Device with +** 128KByte FLASH, 16KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004000; /* end of 16K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x80; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} |