diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot')
9 files changed, 0 insertions, 2144 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/EWARM/stm32f10x_flash_xl_bank1.icf b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/EWARM/stm32f10x_flash_xl_bank1.icf deleted file mode 100644 index 2c2e0d6..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/EWARM/stm32f10x_flash_xl_bank1.icf +++ /dev/null @@ -1,31 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x200; -/**** End of ICF editor section. ###ICF###*/ - - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, - block CSTACK, block HEAP }; diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK1/Settings/arm_arch.lsl b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK1/Settings/arm_arch.lsl deleted file mode 100644 index 3e6d303..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK1/Settings/arm_arch.lsl +++ /dev/null @@ -1,287 +0,0 @@ -//////////////////////////////////////////////////////////////////////////// -// -// File : arm_arch.lsl -// -// Version : @(#)arm_arch.lsl 1.4 09/04/17 -// -// Description : Generic LSL file for ARM architectures -// -// Copyright 2008-2009 Altium BV -// -//////////////////////////////////////////////////////////////////////////// - -#ifndef __STACK -# define __STACK 32k -#endif -#ifndef __HEAP -# define __HEAP 32k -#endif -#ifndef __STACK_FIQ -# define __STACK_FIQ 8 -#endif -#ifndef __STACK_IRQ -# define __STACK_IRQ 8 -#endif -#ifndef __STACK_SVC -# define __STACK_SVC 8 -#endif -#ifndef __STACK_ABT -# define __STACK_ABT 8 -#endif -#ifndef __STACK_UND -# define __STACK_UND 8 -#endif -#ifndef __PROCESSOR_MODE -# define __PROCESSOR_MODE 0x1F /* SYS mode */ -#endif -#ifndef __IRQ_BIT -# define __IRQ_BIT 0x80 /* IRQ interrupts disabled */ -#endif -#ifndef __FIQ_BIT -# define __FIQ_BIT 0x40 /* FIQ interrupts disabled */ -#endif - -#define __APPLICATION_MODE (__PROCESSOR_MODE | __IRQ_BIT | __FIQ_BIT) - -#ifndef __VECTOR_TABLE_ROM_ADDR -# define __VECTOR_TABLE_ROM_ADDR 0x00000000 -#endif - -#ifndef __VECTOR_TABLE_RAM_ADDR -# define __VECTOR_TABLE_RAM_ADDR 0x00000000 -#endif - -#if defined(__CPU_ARMV7M__) || defined(__CPU_ARMV6M__) -# ifndef __NR_OF_VECTORS -# define __NR_OF_VECTORS 16 -# endif -# define __VECTOR_TABLE_SIZE (__NR_OF_VECTORS * 4) -#else -# ifdef __PIC_VECTORS -# define __VECTOR_TABLE_SIZE 64 -# else -# ifdef __FIQ_HANDLER_INLINE -# define __VECTOR_TABLE_SIZE 28 -# define __NR_OF_VECTORS 7 -# else -# define __VECTOR_TABLE_SIZE 32 -# define __NR_OF_VECTORS 8 -# endif -# endif -#endif - -#ifndef __VECTOR_TABLE_RAM_SPACE -# undef __VECTOR_TABLE_RAM_COPY -#endif - -#ifndef __XVWBUF -# define __XVWBUF 0 /* buffer used by CrossView Pro */ -#endif - -#define BOUNDS_GROUP_NAME grp_bounds -#define BOUNDS_GROUP_SELECT "bounds" - -architecture ARM -{ - endianness - { - little; - big; - } - - space linear - { - id = 1; - mau = 8; - map (size = 4G, dest = bus:local_bus); - - copytable - ( - align = 4, - copy_unit = 1, - dest = linear - ); - - start_address - ( - // It is not strictly necessary to define a run_addr for _START - // because hardware starts execution at address 0x0 which should - // be the vector table with a jump to the relocatable _START, but - // an absolute address can prevent the branch to be out-of-range. - // Or _START may be the entry point at reset and the reset handler - // copies the vector table to address 0x0 after some ROM/RAM memory - // re-mapping. In that case _START should be at a fixed address - // in ROM, specifically the alias of address 0x0 before memory - // re-mapping. -#ifdef __START - run_addr = __START, -#endif - symbol = "_START" - ); - - stack "stack" - ( -#ifdef __STACK_FIXED - fixed, -#endif - align = 4, - min_size = __STACK, - grows = high_to_low - ); - - heap "heap" - ( -#ifdef __HEAP_FIXED - fixed, -#endif - align = 4, - min_size=__HEAP - ); - -#if !defined(__CPU_ARMV7M__) && !defined(__CPU_ARMV6M__) - stack "stack_fiq" - ( - fixed, - align = 4, - min_size = __STACK_FIQ, - grows = high_to_low - ); - stack "stack_irq" - ( - fixed, - align = 4, - min_size = __STACK_IRQ, - grows = high_to_low - ); - stack "stack_svc" - ( - fixed, - align = 4, - min_size = __STACK_SVC, - grows = high_to_low - ); - stack "stack_abt" - ( - fixed, - align = 4, - min_size = __STACK_ABT, - grows = high_to_low - ); - stack "stack_und" - ( - fixed, - align = 4, - min_size = __STACK_UND, - grows = high_to_low - ); -#endif - -#if !defined(__NO_AUTO_VECTORS) && !defined(__NO_DEFAULT_AUTO_VECTORS) -# if defined(__CPU_ARMV7M__) || defined(__CPU_ARMV6M__) - // vector table with handler addresses - vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR, - template = ".text.handler_address", - template_symbol = "_lc_vector_handler", - vector_prefix = "_vector_", - fill = loop, - no_inline - ) - { - vector ( id = 0, fill = "_START" ); // FIXME: "_lc_ub_stack" does not work - vector ( id = 1, fill = "_START" ); - } -# else -# ifdef __PIC_VECTORS - // vector table with ldrpc instructions from handler table - vector_table "vector_table" ( vector_size = 4, size = 8, run_addr = __VECTOR_TABLE_ROM_ADDR, - template = ".text.vector_ldrpc", - template_symbol = "_lc_vector_ldrpc", - vector_prefix = "_vector_ldrpc_", - fill = loop - ) - { - } - // subsequent vector table (data pool) with addresses of handlers - vector_table "handler_table" ( vector_size = 4, size = 8, run_addr = __VECTOR_TABLE_ROM_ADDR + 32, - template = ".text.handler_address", - template_symbol = "_lc_vector_handler", - vector_prefix = "_vector_", - fill = loop[-32], - no_inline - ) - { - vector ( id = 0, fill = "_START" ); - } -# else - // vector table with branch instructions to handlers - vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR, - template = ".text.vector_branch", - template_symbol = "_lc_vector_handler", - vector_prefix = "_vector_", - fill = loop - ) - { - vector ( id = 0, fill = "_START" ); - } -# endif -# endif -#endif - section_layout - { -#if defined(__NO_AUTO_VECTORS) - "_lc_ub_vector_table" = __VECTOR_TABLE_ROM_ADDR; - "_lc_ue_vector_table" = __VECTOR_TABLE_ROM_ADDR + __VECTOR_TABLE_SIZE; -#endif -#ifdef __VECTOR_TABLE_RAM_SPACE - // reserve space to copy vector table from ROM to RAM - group ( ordered, run_addr = __VECTOR_TABLE_RAM_ADDR ) - reserved "vector_table_space" ( size = __VECTOR_TABLE_SIZE, attributes = rwx ); -#endif -#ifdef __VECTOR_TABLE_RAM_COPY - // provide copy address symbols for copy routine - "_lc_ub_vector_table_copy" := "_lc_ub_vector_table_space"; - "_lc_ue_vector_table_copy" := "_lc_ue_vector_table_space"; -#else - // prevent copy: copy address equals orig address - "_lc_ub_vector_table_copy" := "_lc_ub_vector_table"; - "_lc_ue_vector_table_copy" := "_lc_ue_vector_table"; -#endif - // define buffer for string input via Crossview Pro debugger - group ( align = 4 ) reserved "xvwbuffer" (size=__XVWBUF, attributes=rw ); - - // define labels for bounds begin and end as used in C library -#ifndef BOUNDS_GROUP_REDEFINED - group BOUNDS_GROUP_NAME (ordered, contiguous) - { - select BOUNDS_GROUP_SELECT; - } -#endif - "_lc_ub_bounds" := addressof(group:BOUNDS_GROUP_NAME); - "_lc_ue_bounds" := addressof(group:BOUNDS_GROUP_NAME) + sizeof(group:BOUNDS_GROUP_NAME); - -#ifdef __HEAPADDR - group ( ordered, run_addr=__HEAPADDR ) - { - select "heap"; - } -#endif -#ifdef __STACKADDR - group ( ordered, run_addr=__STACKADDR ) - { - select "stack"; - } -#endif -#if !defined(__CPU_ARMV7M__) && !defined(__CPU_ARMV6M__) - // symbol to set mode bits and interrupt disable bits - // in cstart module before calling the application (main) - "_APPLICATION_MODE_" = __APPLICATION_MODE; -#endif - } - } - - bus local_bus - { - mau = 8; - width = 32; - } -} diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK1/Settings/reset_go_main.scr b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK1/Settings/reset_go_main.scr deleted file mode 100644 index 3e9c066..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK1/Settings/reset_go_main.scr +++ /dev/null @@ -1,12 +0,0 @@ -// Hitex/Lue/11.02.2008 -// Executable Script file for HiTOP Debugger -// Reset application & Go main - -// Reset -RESET TARGET - - -// execute program till main -Go UNTIL main -wait - diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK2/cstart_thumb2.asm b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK2/cstart_thumb2.asm deleted file mode 100644 index 12dc0d0..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/HiTOP/STM3210X-XL_BANK2/cstart_thumb2.asm +++ /dev/null @@ -1,148 +0,0 @@ - - -;; NOTE: To allow the use of this file for both ARMv6M and ARMv7M, -;; we will only use 16-bit Thumb intructions. - - .extern _lc_ub_stack ; usr/sys mode stack pointer - .extern _lc_ue_stack ; symbol required by debugger - .extern _lc_ub_table ; ROM to RAM copy table - .extern main - .extern _Exit - .extern exit - .weak exit - .global __get_argcv - .weak __get_argcv - .extern __argcvbuf - .weak __argcvbuf - .extern __init_hardware - .extern __init_vector_table - .extern SystemInit - - .if @defined('__PROF_ENABLE__') - .extern __prof_init - .endif - .if @defined('__POSIX__') - .extern posix_main - .extern _posix_boot_stack_top - .endif - - .global _START - - .section .text.cstart - - .thumb -_START: - ;; anticipate possible ROM/RAM remapping - ;; by loading the 'real' program address - ldr r1,=_Next - bx r1 -_Next: - ;; initialize the stack pointer - ldr r1,=_lc_ub_stack ; TODO: make this part of the vector table - mov sp,r1 - - ;; call a user function which initializes hardware - ;; such as ROM/RAM re-mapping or MMU configuration - bl __init_hardware - - ;ldr r0, =SystemInit - ;bx r0 - bl SystemInit - - ;; copy initialized sections from ROM to RAM - ;; and clear uninitialized data sections in RAM - - ldr r3,=_lc_ub_table - movs r0,#0 -cploop: - ldr r4,[r3,#0] ; load type - ldr r5,[r3,#4] ; dst address - ldr r6,[r3,#8] ; src address - ldr r7,[r3,#12] ; size - - cmp r4,#1 - beq copy - cmp r4,#2 - beq clear - b done - -copy: - subs r7,r7,#1 - ldrb r1,[r6,r7] - strb r1,[r5,r7] - bne copy - - adds r3,r3,#16 - b cploop - -clear: - subs r7,r7,#1 - strb r0,[r5,r7] - bne clear - - adds r3,r3,#16 - b cploop - -done: - ;; initialize or copy the vector table - bl __init_vector_table - - .if @defined('__POSIX__') - - ;; posix stack buffer for system upbringing - ldr r0,=_posix_boot_stack_top - ldr r0, [r0] - mov sp,r0 - - .else - - ;; load r10 with end of USR/SYS stack, which is - ;; needed in case stack overflow checking is on - ;; NOTE: use 16-bit instructions only, for ARMv6M - ldr r0,=_lc_ue_stack - mov r10,r0 - - .endif - - .if @defined('__PROF_ENABLE__') - bl __prof_init - .endif - - .if @defined('__POSIX__') - ;; call posix_main with no arguments - bl posix_main - .else - ;; retrieve argc and argv (default argv[0]==NULL & argc==0) - bl __get_argcv - ldr r1,=__argcvbuf - ;; call main - bl main - .endif - - ;; call exit using the return value from main() - ;; Note. Calling exit will also run all functions - ;; that were supplied through atexit(). - bl exit - -__get_argcv: ; weak definition - movs r0,#0 - bx lr - - .ltorg - .endsec - - .calls '_START','__init_hardware' - .calls '_START','__init_vector_table' - .if @defined('__PROF_ENABLE__') - .calls '_START','__prof_init' - .endif - .if @defined('__POSIX__') - .calls '_START','posix_main' - .else - .calls '_START','__get_argcv' - .calls '_START','main' - .endif - .calls '_START','exit' - .calls '_START','',0 - - .end diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/TrueSTUDIO/STM32F10X_XL_BANK1/.cproject b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/TrueSTUDIO/STM32F10X_XL_BANK1/.cproject deleted file mode 100644 index 8ff64a1..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/TrueSTUDIO/STM32F10X_XL_BANK1/.cproject +++ /dev/null @@ -1,346 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?> - -<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> -<storageModule moduleId="org.eclipse.cdt.core.settings"> -<cconfiguration id="com.atollic.truestudio.exe.debug.189815562"> -<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.exe.debug.189815562" moduleId="org.eclipse.cdt.core.settings" name="Debug"> -<externalSettings/> -<extensions> -<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/> -<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> -<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> -<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> -</extensions> -</storageModule> -<storageModule moduleId="cdtBuildSystem" version="4.0.0"> -<configuration artifactExtension="elf" artifactName="STM32F10X_XL_BANK1" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" id="com.atollic.truestudio.exe.debug.189815562" name="Debug" parent="com.atollic.truestudio.exe.debug" postbuildStep="" prebuildStep=""> -<folderInfo id="com.atollic.truestudio.exe.debug.189815562." name="/" resourcePath=""> -<toolChain id="com.atollic.truestudio.exe.debug.toolchain.1571285751" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.debug.toolchain"> -<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.GNU_ELF" id="com.atollic.truestudio.exe.debug.toolchain.platform.1739352405" isAbstract="false" name="Debug platform" superClass="com.atollic.truestudio.exe.debug.toolchain.platform"/> -<builder buildPath="${workspace_loc:/STM32F103ZG/Debug}" id="com.atollic.truestudio.mbs.builder1.61462586" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"/> -<tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX} ${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.as.371140336" name="Assembler" superClass="com.atollic.truestudio.exe.debug.toolchain.as"> -<option id="com.atollic.truestudio.common_options.target.endianess.1578134158" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> -<option id="com.atollic.truestudio.common_options.target.mcpu.1314431980" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> -<option id="com.atollic.truestudio.common_options.target.instr_set.387750939" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> -<inputType id="com.atollic.truestudio.as.input.1699410786" name="Input" superClass="com.atollic.truestudio.as.input"/> -</tool> -<tool commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX} ${OUTPUT} ${INPUTS}" id="com.atollic.truestudio.exe.debug.toolchain.gcc.486923113" name="C Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gcc"> -<option id="com.atollic.truestudio.gcc.directories.select.1744802288" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" valueType="includePath"> -<listOptionValue builtIn="false" value=""../..\..\""/> -<listOptionValue builtIn="false" value="../../../../../../../Libraries/CMSIS/CM3/CoreSupport"/> -<listOptionValue builtIn="false" value="../../../../../../../Libraries/CMSIS/CM3/DeviceSupport/ST/STM32F10x"/> -<listOptionValue builtIn="false" value="../../../../../../../Libraries/STM32F10x_StdPeriph_Driver/inc"/> -<listOptionValue builtIn="false" value="../../../../../../../Utilities/STM32_EVAL/Common"/> -<listOptionValue builtIn="false" value="../../../../../../../Utilities/STM32_EVAL/STM3210E_EVAL"/> -<listOptionValue builtIn="false" value="../../../../../../../Utilities/STM32_EVAL"/> -</option> -<option id="com.atollic.truestudio.gcc.symbols.defined.1922813422" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" valueType="definedSymbols"> -<listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> -<listOptionValue builtIn="false" value="USE_STM3210E_EVAL"/> -<listOptionValue builtIn="false" value="STM32F10X_XL"/> -<listOptionValue builtIn="false" value="BOOT_FROM_BANK1"/> -</option> -<option id="com.atollic.truestudio.common_options.target.endianess.529651997" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> -<option id="com.atollic.truestudio.common_options.target.mcpu.1684401938" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> -<option id="com.atollic.truestudio.common_options.target.instr_set.1997653104" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> -<option id="com.atollic.truestudio.gcc.optimization.prep_garbage.586288316" name="Prepare dead code removal" superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" value="true" valueType="boolean"/> -<option id="com.atollic.truestudio.gcc.optimization.prep_data.1474007059" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" value="true" valueType="boolean"/> -<option id="com.atollic.truestudio.gcc.misc.otherflags.1820971968" name="Other options" superClass="com.atollic.truestudio.gcc.misc.otherflags" value="-Os -w" valueType="string"/> -<inputType id="com.atollic.truestudio.gcc.input.377284588" superClass="com.atollic.truestudio.gcc.input"/> -</tool> -<tool id="com.atollic.truestudio.exe.debug.toolchain.ld.244354017" name="C Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ld"> -<option id="com.atollic.truestudio.common_options.target.endianess.155448976" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> -<option id="com.atollic.truestudio.common_options.target.mcpu.915646075" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> -<option id="com.atollic.truestudio.common_options.target.instr_set.1739994990" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> -<option id="com.atollic.truestudio.ld.general.scriptfile.1049792298" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="${workspace_loc:\STM32F10X_XL_BANK1\stm32f10x_flash_xl_bank1.ld}" valueType="string"/> -<option id="com.atollic.truestudio.ld.optimization.do_garbage.517514787" name="Dead code removal" superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> -<inputType id="com.atollic.truestudio.ld.input.731011867" name="Input" superClass="com.atollic.truestudio.ld.input"> -<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> -<additionalInput kind="additionalinput" paths="$(LIBS)"/> -</inputType> -</tool> -<tool id="com.atollic.truestudio.exe.debug.toolchain.gpp.1523226111" name="C++ Compiler" superClass="com.atollic.truestudio.exe.debug.toolchain.gpp"> -<option id="com.atollic.truestudio.gpp.symbols.defined.26443420" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" valueType="stringList"> -<listOptionValue builtIn="false" value="STM32F10X_HD"/> -<listOptionValue builtIn="false" value="USE_STDPERIPH_DRIVER"/> -</option> -<option id="com.atollic.truestudio.common_options.target.endianess.1289217812" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> -<option id="com.atollic.truestudio.common_options.target.mcpu.144019967" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> -<option id="com.atollic.truestudio.common_options.target.instr_set.1807046025" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> -<option id="com.atollic.truestudio.gpp.optimization.prep_garbage.704598245" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" value="true" valueType="boolean"/> -<option id="com.atollic.truestudio.gpp.optimization.fno_rtti.478811538" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti"/> -<option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.864630601" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions"/> -</tool> -<tool id="com.atollic.truestudio.exe.debug.toolchain.ldcc.1692358135" name="C++ Linker" superClass="com.atollic.truestudio.exe.debug.toolchain.ldcc"> -<option id="com.atollic.truestudio.common_options.target.endianess.820544888" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> -<option id="com.atollic.truestudio.common_options.target.mcpu.710897842" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103ZE" valueType="enumerated"/> -<option id="com.atollic.truestudio.common_options.target.instr_set.160897551" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> -<option id="com.atollic.truestudio.ldcc.optimization.do_garbage.417308276" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" value="true" valueType="boolean"/> -<option id="com.atollic.truestudio.ldcc.general.scriptfile.1343613995" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" value="${workspace_loc:\STM32F103ZG\stm32_flash.ld}" valueType="string"/> -</tool> -</toolChain> -</folderInfo> -<sourceEntries> -<entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/> -</sourceEntries> -</configuration> -</storageModule> -<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> -<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/> -<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/> -<storageModule moduleId="scannerConfiguration"> -<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> -<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="makefileGenerator"> -<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.189815562;com.atollic.truestudio.exe.debug.189815562.;com.atollic.truestudio.exe.debug.toolchain.gcc.486923113;com.atollic.truestudio.gcc.input.377284588"> -<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> -<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="makefileGenerator"> -<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -</scannerConfigBuildInfo> -<scannerConfigBuildInfo instanceId="com.atollic.truestudio.exe.debug.189815562;com.atollic.truestudio.exe.debug.189815562.200587476;com.atollic.truestudio.exe.debug.toolchain.gcc.475959125;com.atollic.truestudio.gcc.input.910049069"> -<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"/> -<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="makefileGenerator"> -<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/${specs_file}"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'g++ -E -P -v -dD "${plugin_state_location}/specs.cpp"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC"> -<buildOutputProvider> -<openAction enabled="true" filePath=""/> -<parser enabled="true"/> -</buildOutputProvider> -<scannerInfoProvider id="specsFile"> -<runAction arguments="-c 'gcc -E -P -v -dD "${plugin_state_location}/specs.c"'" command="sh" useDefault="true"/> -<parser enabled="true"/> -</scannerInfoProvider> -</profile> -</scannerConfigBuildInfo> -</storageModule> -</cconfiguration> -</storageModule> -<storageModule moduleId="cdtBuildSystem" version="4.0.0"> -<project id="STM32F103ZG.com.atollic.truestudio.exe.973923606" name="Executable" projectType="com.atollic.truestudio.exe"/> -</storageModule> -</cproject> diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/TrueSTUDIO/STM32F10X_XL_BANK1/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/TrueSTUDIO/STM32F10X_XL_BANK1/.settings/com.atollic.truestudio.debug.hardware_device.prefs deleted file mode 100644 index a3b6606..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/TrueSTUDIO/STM32F10X_XL_BANK1/.settings/com.atollic.truestudio.debug.hardware_device.prefs +++ /dev/null @@ -1,11 +0,0 @@ -#Tue Jul 13 09:06:52 GMT+01:00 2010 -BOARD=STM3210E-EVAL -CODE_LOCATION=FLASH -ENDIAN=Little-endian -MCU=STM32F103ZG -MODEL=Lite -PROBE=ST-LINK -PROJECT_FORMAT_VERSION=1 -TARGET=STM32 -VERSION=1.4.0 -eclipse.preferences.version=1 diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/stm32f10x_it.c deleted file mode 100644 index 03dedc2..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/stm32f10x_it.c +++ /dev/null @@ -1,169 +0,0 @@ -/** - ****************************************************************************** - * @file FLASH/Dual_Boot/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "main.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup Dual_Boot - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ - TimingDelay_Decrement(); -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/stm32f10x_it.h deleted file mode 100644 index 1050471..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/stm32f10x_it.h +++ /dev/null @@ -1,46 +0,0 @@ -/** - ****************************************************************************** - * @file FLASH/Dual_Boot/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/system_stm32f10x.c deleted file mode 100644 index 6fccb6d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FLASH/Dual_Boot/system_stm32f10x.c +++ /dev/null @@ -1,1094 +0,0 @@ -/** - ****************************************************************************** - * @file FLASH/Dual_Boot/system_stm32f10x.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f10x_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 3. If the system clock source selected by user fails to startup, the SystemInit() - * function will do nothing and HSI still used as system clock source. User can - * add some code to deal with this issue inside the SetSysClock() function. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on - * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** @addtogroup STM32F10x_System_Private_Includes - * @{ - */ - -#include "stm32f10x.h" - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Defines - * @{ - */ - -/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) - frequency (after reset the HSI is used as SYSCLK source) - - IMPORTANT NOTE: - ============== - 1. After each device reset the HSI is used as System clock source. - - 2. Please make sure that the selected System clock doesn't exceed your device's - maximum frequency. - - 3. If none of the define below is enabled, the HSI is used as System clock - source. - - 4. The System clock configuration functions provided within this file assume that: - - For Low, Medium and High density Value line devices an external 8MHz - crystal is used to drive the System clock. - - For Low, Medium and High density devices an external 8MHz crystal is - used to drive the System clock. - - For Connectivity line devices an external 25MHz crystal is used to drive - the System clock. - If you are using different crystal you have to adapt those functions accordingly. - */ - -#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ - #define SYSCLK_FREQ_24MHz 24000000 -#else -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ -/* #define SYSCLK_FREQ_24MHz 24000000 */ -/* #define SYSCLK_FREQ_36MHz 36000000 */ -/* #define SYSCLK_FREQ_48MHz 48000000 */ -/* #define SYSCLK_FREQ_56MHz 56000000 */ -#define SYSCLK_FREQ_72MHz 72000000 -#endif - -/*!< Uncomment the following line if you need to use external SRAM mounted - on STM3210E-EVAL board (STM32 High density and XL-density devices) or on - STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) -/* #define DATA_IN_ExtSRAM */ -#endif - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#ifdef SYSCLK_FREQ_HSE - uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_24MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_36MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_48MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_56MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_72MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ -#else /*!< HSI Selected as System Clock source */ - uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ -#endif - -__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_FunctionPrototypes - * @{ - */ - -static void SetSysClock(void); - -#ifdef SYSCLK_FREQ_HSE - static void SetSysClockToHSE(void); -#elif defined SYSCLK_FREQ_24MHz - static void SetSysClockTo24(void); -#elif defined SYSCLK_FREQ_36MHz - static void SetSysClockTo36(void); -#elif defined SYSCLK_FREQ_48MHz - static void SetSysClockTo48(void); -#elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); -#elif defined SYSCLK_FREQ_72MHz - static void SetSysClockTo72(void); -#endif - -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifdef STM32F10X_CL - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - - /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ - /* Configure the Flash Latency cycles and enable prefetch buffer */ - SetSysClock(); - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depedning on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#ifdef STM32F10X_CL - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - uint32_t prediv1factor = 0; -#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#ifndef STM32F10X_CL - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F10X_CL */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. - * @param None - * @retval None - */ -static void SetSysClock(void) -{ -#ifdef SYSCLK_FREQ_HSE - SetSysClockToHSE(); -#elif defined SYSCLK_FREQ_24MHz - SetSysClockTo24(); -#elif defined SYSCLK_FREQ_36MHz - SetSysClockTo36(); -#elif defined SYSCLK_FREQ_48MHz - SetSysClockTo48(); -#elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); -#elif defined SYSCLK_FREQ_72MHz - SetSysClockTo72(); -#endif - - /* If none of the define above is enabled, the HSI is used as System clock - source (default after reset) */ -} - -/** - * @brief Setup the external memory controller. Called in startup_stm32f10x.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f10x_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ -/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001011; - FSMC_Bank1->BTCR[5] = 0x00000200; -} -#endif /* DATA_IN_ExtSRAM */ - -#ifdef SYSCLK_FREQ_HSE -/** - * @brief Selects HSE as System clock source and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockToHSE(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - -#ifndef STM32F10X_CL - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#else - if (HSE_VALUE <= 24000000) - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; - } - else - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - } -#endif /* STM32F10X_CL */ -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - - /* Select HSE as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; - - /* Wait till HSE is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_24MHz -/** - * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo24(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); - - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_36MHz -/** - * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo36(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); - - /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - -#else - /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_48MHz -/** - * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo48(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_56MHz -/** - * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo56(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL7); -#else - /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); - -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_72MHz -/** - * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo72(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); -#else - /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | - RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |