diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR_CodeExecute/binary/readme.txt')
| -rw-r--r-- | tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR_CodeExecute/binary/readme.txt | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR_CodeExecute/binary/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR_CodeExecute/binary/readme.txt new file mode 100644 index 0000000..a06bbdc --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/NOR_CodeExecute/binary/readme.txt @@ -0,0 +1,108 @@ +/** + @page FSMC_NOR_CodeExecute_binary FSMC NOR CodeExecute example binary directory + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file FSMC/NOR_CodeExecute/binary/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the FSMC NOR CodeExecute example binary directory. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This directory contains a set of sources files that build the application to be +loaded into the NOR memory mounted on STM3210E-EVAL board. + +The GPIO IOToggle example provided within the STM32F10x Firmware library is used +as illustration. In this example four LEDs: LED1, LED2, LED3 and LED4 are +toggled in an infinite loop. + +@par Directory contents + + - FSMC/NOR_CodeExecute/binary/stm32f10x_conf.h Library Configuration file + - FSMC/NOR_CodeExecute/binary/stm32f10x_it.c Interrupt handlers + - FSMC/NOR_CodeExecute/binary/stm32f10x_it.h Header for stm32f10x_it.c + - FSMC/NOR_CodeExecute/binary/main.c Main program + - FSMC/NOR_CodeExecute/binary/FLASH_NOR.ini NOR Initialization File for MDK-ARM toolchain. + - FSMC/NOR_CodeExecute/binary/STM3210E-EVAL_NOR.FLM STM3210E-EVAL board NOR flasher for MDK-ARM toolchain. + - FSMC/NOR_CodeExecute/binary/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs only on STM32F10x High-Density and XL-Density Devices. + + - This example has been tested with STMicroelectronics STM3210E-EVAL (High-Density + and XL-Density) evaluation board. + To select the STMicroelectronics evaluation board used to run the example, + uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL) + +@par How to use it ? + +In order to make the program work, you must do the following: +- Create a project and setup all project configuration: +<ul> + <li> MDK-ARM + - copy "STM3210E-EVAL_NOR.FLM" file under "C:\Keil\ARM\Flash" directory + - in Project->Options->Target window, select 'ROM1', enter 0x64000000 as + start address with size of 0x1000000 and check "Startup" option + (IROM1 must be un-checked) + - in Project->Options->Linker window, uncheck "Use memory Layout from + Target Dialog" then enter 0x64000000 as R/O base address and chek + again "Use memory Layout from Target Dialog" + - in Project->Options->Utilities window, select "Use Target Driver for + Flash Programming" + - Click on 'Settings' button then select "STM3210E_EVAL NOR Flash" as + Programming Algorithms (start:0x64000000, size:0x1000000) + - in Project->Options->Debug select "FLASH_NOR.ini" provided within this + example directory as initialization file. + + <li> EWARM + - use "stm32f10x_nor.icf" as linker file + - in project->options ->debugger-> setup , the "run to main" option + should be un-checked + - in project->options ->J-Link/J-Trace-> setup , set the "Reset" to + "Normal" + - in project->options ->debugger->download, click on "edit" button + ("Use flash loader(s)" option should be checked) + - select the default flash loader then click on "edit" button + - check "override default flash loader path" option and select + "FlashSTM32F10x_NOR.xml" as flash loader + ($TOOLKIT_DIR$\config\flashloader\ST\FlashSTM32F10x_NOR.xml) +</ul> + +- Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template +- Open your preferred toolchain +- Rebuild all files and load your image into target memory +- Run the example +- Link all compiled files and load your image into NOR memory + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> + */ |