1 files changed, 237 insertions, 0 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c
new file mode 100644
index 0000000..7983890
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c
@@ -0,0 +1,237 @@
+/**
+  ******************************************************************************
+  * @file    USART/MultiProcessor/main.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+#include "platform_config.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup USART_MultiProcessor
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+USART_InitTypeDef USART_InitStructure;
+
+/* Private function prototypes -----------------------------------------------*/
+void RCC_Configuration(void);
+void GPIO_Configuration(void);
+void Delay(__IO uint32_t nCount);
+
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @brief  Main program
+  * @param  None
+  * @retval None
+  */
+int main(void)
+{
+  /*!< At this stage the microcontroller clock setting is already configured, 
+       this is done through SystemInit() function which is called from startup
+       file (startup_stm32f10x_xx.s) before to branch to application main.
+       To reconfigure the default setting of SystemInit() function, refer to
+       system_stm32f10x.c file
+     */     
+       
+  /* System Clocks Configuration */
+  RCC_Configuration();
+       
+  /* Configure the GPIO ports */
+  GPIO_Configuration();
+
+  /* Initialize Leds, Wakeup and Key Buttons mounted on STM3210X-EVAL board */ 
+  STM_EVAL_LEDInit(LED1);
+  STM_EVAL_LEDInit(LED2);
+  STM_EVAL_LEDInit(LED3);
+  STM_EVAL_LEDInit(LED4);
+  STM_EVAL_PBInit(BUTTON_WAKEUP, BUTTON_MODE_EXTI);          
+  STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_EXTI);  
+
+/* USARTy and USARTz configuration -------------------------------------------*/
+  /* USARTy and USARTz configured as follow:
+        - BaudRate = 9600 baud  
+        - Word Length = 9 Bits
+        - One Stop Bit
+        - No parity
+        - Hardware flow control disabled (RTS and CTS signals)
+        - Receive and transmit enabled
+  */
+  USART_InitStructure.USART_BaudRate = 9600;
+  USART_InitStructure.USART_WordLength = USART_WordLength_9b;
+  USART_InitStructure.USART_StopBits = USART_StopBits_1;
+  USART_InitStructure.USART_Parity = USART_Parity_No;
+  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+  
+  /* Configure USARTy */
+  USART_Init(USARTy, &USART_InitStructure);
+  /* Configure USARTz */
+  USART_Init(USARTz, &USART_InitStructure);
+  
+  /* Enable the USARTy */
+  USART_Cmd(USARTy, ENABLE);
+  /* Enable the USARTz */
+  USART_Cmd(USARTz, ENABLE);
+
+  /* Set the USARTy Address */
+  USART_SetAddress(USARTy, 0x1);
+  /* Set the USARTz Address */
+  USART_SetAddress(USARTz, 0x2);
+
+  /* Select the USARTz WakeUp Method */
+  USART_WakeUpConfig(USARTz, USART_WakeUp_AddressMark);
+  
+  while (1)
+  {
+    /* Send one byte from USARTy to USARTz */
+    USART_SendData(USARTy, 0x33);
+    
+    /* Wait while USART1 TXE = 0 */
+    while(USART_GetFlagStatus(USARTz, USART_FLAG_TXE) == RESET)
+    {
+    }
+    
+    if(USART_GetFlagStatus(USARTz, USART_FLAG_RXNE) != RESET)
+    {
+      if(USART_ReceiveData(USARTz) == 0x33)
+      {
+        STM_EVAL_LEDToggle(LED1);
+        Delay(0x5FFFF);
+        STM_EVAL_LEDToggle(LED2);
+        Delay(0x5FFFF);
+        STM_EVAL_LEDToggle(LED3);
+        Delay(0x5FFFF);
+        STM_EVAL_LEDToggle(LED4);
+        Delay(0x5FFFF);
+      }
+    }
+  }
+}
+
+/**
+  * @brief  Configures the different system clocks.
+  * @param  None
+  * @retval None
+  */
+void RCC_Configuration(void)
+{
+  /* Enable GPIO clock */
+  RCC_APB2PeriphClockCmd(USARTy_GPIO_CLK | USARTz_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE);
+
+#ifndef USE_STM3210C_EVAL
+  /* Enable USARTy Clock */
+  RCC_APB2PeriphClockCmd(USARTy_CLK, ENABLE); 
+#else
+  /* Enable USARTy Clock */
+  RCC_APB1PeriphClockCmd(USARTy_CLK, ENABLE); 
+#endif
+  /* Enable USARTz Clock */
+  RCC_APB1PeriphClockCmd(USARTz_CLK, ENABLE);  
+}
+
+/**
+  * @brief  Configures the different GPIO ports.
+  * @param  None
+  * @retval None
+  */
+void GPIO_Configuration(void)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;
+
+#ifdef USE_STM3210C_EVAL
+  /* Enable the USART3 Pins Software Remapping */
+  GPIO_PinRemapConfig(GPIO_PartialRemap_USART3, ENABLE);
+  
+  /* Enable the USART2 Pins Software Remapping */
+  GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE);  
+#elif defined(USE_STM3210B_EVAL) || defined(USE_STM32100B_EVAL)
+  /* Enable the USART2 Pins Software Remapping */
+  GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE);
+#endif
+
+  /* Configure USARTy Rx as input floating */
+  GPIO_InitStructure.GPIO_Pin = USARTy_RxPin;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+  GPIO_Init(USARTy_GPIO, &GPIO_InitStructure);
+  
+  /* Configure USARTz Rx as input floating */
+  GPIO_InitStructure.GPIO_Pin = USARTz_RxPin;
+  GPIO_Init(USARTz_GPIO, &GPIO_InitStructure);  
+  
+  /* Configure USARTy Tx as alternate function push-pull */
+  GPIO_InitStructure.GPIO_Pin = USARTy_TxPin;
+  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+  GPIO_Init(USARTy_GPIO, &GPIO_InitStructure);
+
+  /* Configure USARTz Tx as alternate function push-pull */
+  GPIO_InitStructure.GPIO_Pin = USARTz_TxPin;
+  GPIO_Init(USARTz_GPIO, &GPIO_InitStructure);  
+}
+
+/**
+  * @brief  Inserts a delay time.
+  * @param  nCount: specifies the delay time length.
+  * @retval None
+  */
+void Delay(__IO uint32_t nCount)
+{
+  /* Decrement nCount value */
+  for(; nCount != 0; nCount--);
+}
+
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+
+  /* Infinite loop */
+  while (1)
+  {
+  }
+}
+
+#endif
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/