diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/platform_config.h')
| -rw-r--r-- | tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/platform_config.h | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/platform_config.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/platform_config.h new file mode 100644 index 0000000..e90404d --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/platform_config.h @@ -0,0 +1,127 @@ +/** + ****************************************************************************** + * @file USART/Smartcard/platform_config.h + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Evaluation board specific configuration file. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __PLATFORM_CONFIG_H +#define __PLATFORM_CONFIG_H + +/* Includes ------------------------------------------------------------------*/ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line corresponding to the STMicroelectronics evaluation board + used to run the example */ +#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM3210C_EVAL) + //#define USE_STM3210B_EVAL + //#define USE_STM3210E_EVAL + #define USE_STM3210C_EVAL +#endif + +/* Define the STM32F10x hardware depending on the used evaluation board */ +#ifdef USE_STM3210B_EVAL + /* Smartcard Inteface USART pins */ + #define SC_USART USART3 + #define SC_USART_GPIO GPIOB + #define SC_USART_CLK RCC_APB1Periph_USART3 + #define SC_USART_GPIO_CLK RCC_APB2Periph_GPIOB + #define SC_USART_TxPin GPIO_Pin_10 + #define SC_USART_ClkPin GPIO_Pin_12 + #define SC_USART_IRQn USART3_IRQn + #define SC_USART_IRQHandler USART3_IRQHandler + /* Smartcard Inteface GPIO pins */ + #define SC_3_5V GPIO_Pin_11 /* GPIOD Pin 11 */ + #define SC_RESET GPIO_Pin_11 /* GPIOB Pin 11 */ + #define SC_CMDVCC GPIO_Pin_7 /* GPIOE Pin 7 */ + #define SC_OFF GPIO_Pin_14 /* GPIOE Pin 14 */ + #define GPIO_3_5V GPIOD + #define GPIO_RESET GPIOB + #define GPIO_CMDVCC GPIOE + #define GPIO_OFF GPIOE + #define RCC_APB2Periph_3_5V RCC_APB2Periph_GPIOD + #define RCC_APB2Periph_RESET RCC_APB2Periph_GPIOB + #define RCC_APB2Periph_CMDVCC RCC_APB2Periph_GPIOE + #define RCC_APB2Periph_OFF RCC_APB2Periph_GPIOE + #define SC_EXTI EXTI_Line14 + #define SC_PortSource GPIO_PortSourceGPIOE + #define SC_PinSource GPIO_PinSource14 + #define SC_EXTI_IRQ EXTI15_10_IRQn +#elif defined USE_STM3210E_EVAL + /* Smartcard Inteface USART pins */ + #define SC_USART USART3 + #define SC_USART_GPIO GPIOB + #define SC_USART_CLK RCC_APB1Periph_USART3 + #define SC_USART_GPIO_CLK RCC_APB2Periph_GPIOB + #define SC_USART_TxPin GPIO_Pin_10 + #define SC_USART_ClkPin GPIO_Pin_12 + #define SC_USART_IRQn USART3_IRQn + #define SC_USART_IRQHandler USART3_IRQHandler + /* Smartcard Inteface GPIO pins */ + #define SC_3_5V GPIO_Pin_0 /* GPIOB Pin 0 */ + #define SC_RESET GPIO_Pin_11 /* GPIOB Pin 11 */ + #define SC_CMDVCC GPIO_Pin_6 /* GPIOC Pin 6 */ + #define SC_OFF GPIO_Pin_7 /* GPIOC Pin 7 */ + #define GPIO_3_5V GPIOB + #define GPIO_RESET GPIOB + #define GPIO_CMDVCC GPIOC + #define GPIO_OFF GPIOC + #define RCC_APB2Periph_3_5V RCC_APB2Periph_GPIOB + #define RCC_APB2Periph_RESET RCC_APB2Periph_GPIOB + #define RCC_APB2Periph_CMDVCC RCC_APB2Periph_GPIOC + #define RCC_APB2Periph_OFF RCC_APB2Periph_GPIOC + #define SC_EXTI EXTI_Line7 + #define SC_PortSource GPIO_PortSourceGPIOC + #define SC_PinSource GPIO_PinSource7 + #define SC_EXTI_IRQ EXTI9_5_IRQn +#elif defined USE_STM3210C_EVAL + /* Smartcard Inteface USART pins */ + #define SC_USART USART3 + #define SC_USART_GPIO GPIOD + #define SC_USART_CLK RCC_APB1Periph_USART3 + #define SC_USART_GPIO_CLK RCC_APB2Periph_GPIOD + #define SC_USART_TxPin GPIO_Pin_8 + #define SC_USART_ClkPin GPIO_Pin_10 + #define SC_USART_IRQn USART3_IRQn + #define SC_USART_IRQHandler USART3_IRQHandler + /* Smartcard Inteface GPIO pins */ + #define SC_3_5V GPIO_Pin_0 /* GPIOC Pin 0 */ + #define SC_RESET GPIO_Pin_9 /* GPIOD Pin 9 */ + #define SC_CMDVCC GPIO_Pin_7 /* GPIOD Pin 7 */ + #define SC_OFF GPIO_Pin_7 /* GPIOE Pin 7 */ + #define GPIO_3_5V GPIOC + #define GPIO_RESET GPIOD + #define GPIO_CMDVCC GPIOD + #define GPIO_OFF GPIOE + #define RCC_APB2Periph_3_5V RCC_APB2Periph_GPIOC + #define RCC_APB2Periph_RESET RCC_APB2Periph_GPIOD + #define RCC_APB2Periph_CMDVCC RCC_APB2Periph_GPIOD + #define RCC_APB2Periph_OFF RCC_APB2Periph_GPIOE + #define SC_EXTI EXTI_Line7 + #define SC_PortSource GPIO_PortSourceGPIOE + #define SC_PinSource GPIO_PinSource7 + #define SC_EXTI_IRQ EXTI9_5_IRQn +#endif /* USE_STM3210B_EVAL */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +#endif /* __PLATFORM_CONFIG_H */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |