diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART')
27 files changed, 0 insertions, 6416 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Interrupt/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Interrupt/system_stm32f10x.c deleted file mode 100644 index d8696d9..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Interrupt/system_stm32f10x.c +++ /dev/null @@ -1,1094 +0,0 @@ -/** - ****************************************************************************** - * @file USART/DMA_Interrupt/system_stm32f10x.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f10x_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 3. If the system clock source selected by user fails to startup, the SystemInit() - * function will do nothing and HSI still used as system clock source. User can - * add some code to deal with this issue inside the SetSysClock() function. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on - * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** @addtogroup STM32F10x_System_Private_Includes - * @{ - */ - -#include "stm32f10x.h" - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Defines - * @{ - */ - -/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) - frequency (after reset the HSI is used as SYSCLK source) - - IMPORTANT NOTE: - ============== - 1. After each device reset the HSI is used as System clock source. - - 2. Please make sure that the selected System clock doesn't exceed your device's - maximum frequency. - - 3. If none of the define below is enabled, the HSI is used as System clock - source. - - 4. The System clock configuration functions provided within this file assume that: - - For Low, Medium and High density Value line devices an external 8MHz - crystal is used to drive the System clock. - - For Low, Medium and High density devices an external 8MHz crystal is - used to drive the System clock. - - For Connectivity line devices an external 25MHz crystal is used to drive - the System clock. - If you are using different crystal you have to adapt those functions accordingly. - */ - -#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ - #define SYSCLK_FREQ_24MHz 24000000 -#else -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ -/* #define SYSCLK_FREQ_24MHz 24000000 */ -/* #define SYSCLK_FREQ_36MHz 36000000 */ -/* #define SYSCLK_FREQ_48MHz 48000000 */ -/* #define SYSCLK_FREQ_56MHz 56000000 */ -#define SYSCLK_FREQ_72MHz 72000000 -#endif - -/*!< Uncomment the following line if you need to use external SRAM mounted - on STM3210E-EVAL board (STM32 High density and XL-density devices) or on - STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) -/* #define DATA_IN_ExtSRAM */ -#endif - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#ifdef SYSCLK_FREQ_HSE - uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_24MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_36MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_48MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_56MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_72MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ -#else /*!< HSI Selected as System Clock source */ - uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ -#endif - -__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_FunctionPrototypes - * @{ - */ - -static void SetSysClock(void); - -#ifdef SYSCLK_FREQ_HSE - static void SetSysClockToHSE(void); -#elif defined SYSCLK_FREQ_24MHz - static void SetSysClockTo24(void); -#elif defined SYSCLK_FREQ_36MHz - static void SetSysClockTo36(void); -#elif defined SYSCLK_FREQ_48MHz - static void SetSysClockTo48(void); -#elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); -#elif defined SYSCLK_FREQ_72MHz - static void SetSysClockTo72(void); -#endif - -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifdef STM32F10X_CL - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - - /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ - /* Configure the Flash Latency cycles and enable prefetch buffer */ - SetSysClock(); - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depedning on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#ifdef STM32F10X_CL - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - uint32_t prediv1factor = 0; -#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#ifndef STM32F10X_CL - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F10X_CL */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. - * @param None - * @retval None - */ -static void SetSysClock(void) -{ -#ifdef SYSCLK_FREQ_HSE - SetSysClockToHSE(); -#elif defined SYSCLK_FREQ_24MHz - SetSysClockTo24(); -#elif defined SYSCLK_FREQ_36MHz - SetSysClockTo36(); -#elif defined SYSCLK_FREQ_48MHz - SetSysClockTo48(); -#elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); -#elif defined SYSCLK_FREQ_72MHz - SetSysClockTo72(); -#endif - - /* If none of the define above is enabled, the HSI is used as System clock - source (default after reset) */ -} - -/** - * @brief Setup the external memory controller. Called in startup_stm32f10x.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f10x_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ -/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001011; - FSMC_Bank1->BTCR[5] = 0x00000200; -} -#endif /* DATA_IN_ExtSRAM */ - -#ifdef SYSCLK_FREQ_HSE -/** - * @brief Selects HSE as System clock source and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockToHSE(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - -#ifndef STM32F10X_CL - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#else - if (HSE_VALUE <= 24000000) - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; - } - else - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - } -#endif /* STM32F10X_CL */ -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - - /* Select HSE as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; - - /* Wait till HSE is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_24MHz -/** - * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo24(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); - - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_36MHz -/** - * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo36(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); - - /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - -#else - /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_48MHz -/** - * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo48(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_56MHz -/** - * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo56(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL7); -#else - /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); - -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_72MHz -/** - * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo72(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); -#else - /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | - RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/stm32f10x_it.c deleted file mode 100644 index 6a94664..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/stm32f10x_it.c +++ /dev/null @@ -1,167 +0,0 @@ -/** - ****************************************************************************** - * @file USART/DMA_Polling/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_DMA_Polling - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/stm32f10x_it.h deleted file mode 100644 index f459a8c..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/stm32f10x_it.h +++ /dev/null @@ -1,46 +0,0 @@ -/** - ****************************************************************************** - * @file USART/DMA_Polling/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/system_stm32f10x.c deleted file mode 100644 index 77a3608..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/DMA_Polling/system_stm32f10x.c +++ /dev/null @@ -1,1094 +0,0 @@ -/** - ****************************************************************************** - * @file USART/DMA_Polling/system_stm32f10x.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f10x_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 3. If the system clock source selected by user fails to startup, the SystemInit() - * function will do nothing and HSI still used as system clock source. User can - * add some code to deal with this issue inside the SetSysClock() function. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on - * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** @addtogroup STM32F10x_System_Private_Includes - * @{ - */ - -#include "stm32f10x.h" - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Defines - * @{ - */ - -/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) - frequency (after reset the HSI is used as SYSCLK source) - - IMPORTANT NOTE: - ============== - 1. After each device reset the HSI is used as System clock source. - - 2. Please make sure that the selected System clock doesn't exceed your device's - maximum frequency. - - 3. If none of the define below is enabled, the HSI is used as System clock - source. - - 4. The System clock configuration functions provided within this file assume that: - - For Low, Medium and High density Value line devices an external 8MHz - crystal is used to drive the System clock. - - For Low, Medium and High density devices an external 8MHz crystal is - used to drive the System clock. - - For Connectivity line devices an external 25MHz crystal is used to drive - the System clock. - If you are using different crystal you have to adapt those functions accordingly. - */ - -#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ - #define SYSCLK_FREQ_24MHz 24000000 -#else -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ -/* #define SYSCLK_FREQ_24MHz 24000000 */ -/* #define SYSCLK_FREQ_36MHz 36000000 */ -/* #define SYSCLK_FREQ_48MHz 48000000 */ -/* #define SYSCLK_FREQ_56MHz 56000000 */ -#define SYSCLK_FREQ_72MHz 72000000 -#endif - -/*!< Uncomment the following line if you need to use external SRAM mounted - on STM3210E-EVAL board (STM32 High density and XL-density devices) or on - STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) -/* #define DATA_IN_ExtSRAM */ -#endif - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#ifdef SYSCLK_FREQ_HSE - uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_24MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_36MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_48MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_56MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_72MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ -#else /*!< HSI Selected as System Clock source */ - uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ -#endif - -__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_FunctionPrototypes - * @{ - */ - -static void SetSysClock(void); - -#ifdef SYSCLK_FREQ_HSE - static void SetSysClockToHSE(void); -#elif defined SYSCLK_FREQ_24MHz - static void SetSysClockTo24(void); -#elif defined SYSCLK_FREQ_36MHz - static void SetSysClockTo36(void); -#elif defined SYSCLK_FREQ_48MHz - static void SetSysClockTo48(void); -#elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); -#elif defined SYSCLK_FREQ_72MHz - static void SetSysClockTo72(void); -#endif - -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifdef STM32F10X_CL - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - - /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ - /* Configure the Flash Latency cycles and enable prefetch buffer */ - SetSysClock(); - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depedning on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#ifdef STM32F10X_CL - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - uint32_t prediv1factor = 0; -#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#ifndef STM32F10X_CL - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F10X_CL */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. - * @param None - * @retval None - */ -static void SetSysClock(void) -{ -#ifdef SYSCLK_FREQ_HSE - SetSysClockToHSE(); -#elif defined SYSCLK_FREQ_24MHz - SetSysClockTo24(); -#elif defined SYSCLK_FREQ_36MHz - SetSysClockTo36(); -#elif defined SYSCLK_FREQ_48MHz - SetSysClockTo48(); -#elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); -#elif defined SYSCLK_FREQ_72MHz - SetSysClockTo72(); -#endif - - /* If none of the define above is enabled, the HSI is used as System clock - source (default after reset) */ -} - -/** - * @brief Setup the external memory controller. Called in startup_stm32f10x.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f10x_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ -/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001011; - FSMC_Bank1->BTCR[5] = 0x00000200; -} -#endif /* DATA_IN_ExtSRAM */ - -#ifdef SYSCLK_FREQ_HSE -/** - * @brief Selects HSE as System clock source and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockToHSE(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - -#ifndef STM32F10X_CL - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#else - if (HSE_VALUE <= 24000000) - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; - } - else - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - } -#endif /* STM32F10X_CL */ -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - - /* Select HSE as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; - - /* Wait till HSE is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_24MHz -/** - * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo24(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); - - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_36MHz -/** - * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo36(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); - - /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - -#else - /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_48MHz -/** - * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo48(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_56MHz -/** - * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo56(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL7); -#else - /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); - -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_72MHz -/** - * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo72(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); -#else - /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | - RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HalfDuplex/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HalfDuplex/stm32f10x_it.c deleted file mode 100644 index 2ae5127..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HalfDuplex/stm32f10x_it.c +++ /dev/null @@ -1,167 +0,0 @@ -/** - ****************************************************************************** - * @file USART/HalfDuplex/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_HalfDuplex - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HalfDuplex/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HalfDuplex/stm32f10x_it.h deleted file mode 100644 index 0fc3f35..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HalfDuplex/stm32f10x_it.h +++ /dev/null @@ -1,46 +0,0 @@ -/** - ****************************************************************************** - * @file USART/HalfDuplex/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_HwFlowControl/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_HwFlowControl/main.c deleted file mode 100644 index 6f3916c..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_HwFlowControl/main.c +++ /dev/null @@ -1,191 +0,0 @@ -/** - ****************************************************************************** - * @file USART/HyperTerminal_HwFlowControl/main.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main program body - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" -#include "platform_config.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_HyperTerminal_HwFlowControl - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define TxBufferSize (countof(TxBuffer) - 1) -#define RxBufferSize 0xFF - -/* Private macro -------------------------------------------------------------*/ -#define countof(a) (sizeof(a) / sizeof(*(a))) - -/* Private variables ---------------------------------------------------------*/ -USART_InitTypeDef USART_InitStructure; -uint8_t TxBuffer[] = "\n\rUSART Hyperterminal Hardware Flow Control Example: USART - \ -Hyperterminal communication using hardware flow control\n\r"; -uint8_t RxBuffer[RxBufferSize]; -uint8_t NbrOfDataToTransfer = TxBufferSize; -uint8_t TxCounter = 0; -uint8_t RxCounter = 0; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief Main program - * @param None - * @retval None - */ -int main(void) -{ - /*!< At this stage the microcontroller clock setting is already configured, - this is done through SystemInit() function which is called from startup - file (startup_stm32f10x_xx.s) before to branch to application main. - To reconfigure the default setting of SystemInit() function, refer to - system_stm32f10x.c file - */ - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* Configure the GPIO ports */ - GPIO_Configuration(); - -/* USART2 configuration ------------------------------------------------------*/ - /* USART2 configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control enabled (RTS and CTS signals) - - Receive and transmit enabled - */ - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No ; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_RTS_CTS; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - - USART_Init(USART2, &USART_InitStructure); - /* Enable the USART2 */ - USART_Cmd(USART2, ENABLE); - -/* Communication hyperterminal-USART2 using hardware flow control -------------*/ - /* Send a buffer from USART to hyperterminal */ - while(NbrOfDataToTransfer--) - { - USART_SendData(USART2, TxBuffer[TxCounter++]); - while(USART_GetFlagStatus(USART2, USART_FLAG_TXE) == RESET); - } - - /* Receive a string (Max RxBufferSize bytes) from the Hyperterminal ended by '\r' (Enter key) */ - do - { - if((USART_GetFlagStatus(USART2, USART_FLAG_RXNE) != RESET)&&(RxCounter < RxBufferSize)) - { - RxBuffer[RxCounter] = USART_ReceiveData(USART2); - USART_SendData(USART2, RxBuffer[RxCounter++]); - } - - }while((RxBuffer[RxCounter - 1] != '\r')&&(RxCounter != RxBufferSize)); - - while (1) - { - } -} - -/** - * @brief Configures the different system clocks. - * @param None - * @retval None - */ -void RCC_Configuration(void) -{ - /* Enable GPIOx and AFIO clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOx | RCC_APB2Periph_AFIO, ENABLE); - - /* Enable USART2 clocks */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); -} - -/** - * @brief Configures the different GPIO ports. - * @param None - * @retval None - */ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - -#if defined(USE_STM3210B_EVAL) || defined(USE_STM32100B_EVAL) - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); -#endif - - /* Configure USART2 RTS and USART2 Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_RTSPin | GPIO_TxPin; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOx, &GPIO_InitStructure); - - /* Configure USART2 CTS and USART2 Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_CTSPin | GPIO_RxPin; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOx, &GPIO_InitStructure); -} - -#ifdef USE_FULL_ASSERT - -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_HwFlowControl/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_HwFlowControl/readme.txt deleted file mode 100644 index 3562811..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_HwFlowControl/readme.txt +++ /dev/null @@ -1,123 +0,0 @@ -/** - @page USART_HyperTerminal_HwFlowControl USART Hyperterminal Hardware Flow Control example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file USART/HyperTerminal_HwFlowControl/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the USART Hyperterminal Hardware Flow Control - * example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example provides a description of how to use the USART with hardware flow -control and communicate with the Hyperterminal. -First, the USART2 sends the TxBuffer to the hyperterminal and still waiting for -a string from the hyperterminal that you must enter which must end by '\r' -character (keypad ENTER button). The communication will end if received data exceed -255 without sending the '\r' character. Each byte received is retransmitted to the -Hyperterminal. -The string that you have entered is stored in the RxBuffer array. The receive -buffer have a RxBufferSize bytes as maximum. - -The USART2 is configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control enabled (RTS and CTS signals) - - Receive and transmit enabled - -@par Directory contents - - - USART/HyperTerminal_HwFlowControl/platform_config.h Evaluation board specific configuration file - - USART/HyperTerminal_HwFlowControl/stm32f10x_conf.h Library Configuration file - - USART/HyperTerminal_HwFlowControl/stm32f10x_it.h Interrupt handlers header file - - USART/HyperTerminal_HwFlowControl/stm32f10x_it.c Interrupt handlers - - USART/HyperTerminal_HwFlowControl/main.c Main program - - USART/HyperTerminal_HwFlowControl/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, High-Density - Value line,Medium-Density, XL-Density, Medium-Density Value line, Low-Density - and Low-Density Value line Devices. - - - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density - Value line), STM32100B-EVAL (Medium-Density Value line), STM3210E-EVAL - (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) evaluation - boards and can be easily tailored to any other supported device and development - board. - This example can't be tested with STM3210C-EVAL (Connectivity Line) evaluation board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in USART/HyperTerminal_HwFlowControl/platform_config.h file - - - STM32100E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN10 and PC serial - port. - @note Make sure the Jumper 5 (JP5) is not open. - - - STM32100B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN9 and PC serial - port. - @note In this case USART2 Tx, Rx, RTS and CTS pins are remapped by software - on PD.05, PD.06, PD.04 and PD.03 respectively. - - - STM3210E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN8 and PC serial - port. - @note Make sure the Jumper 4 (JP4) is in position 2<-->3. - - - STM3210B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN5 and PC serial - port. - @note In this case USART2 Tx, Rx, RTS and CTS pins are remapped by software - on PD.05, PD.06, PD.04 and PD.03 respectively. - - - - Hyperterminal configuration: - - Word Length = 8 Bits - - One Stop Bit - - No parity - - BaudRate = 115200 baud - - flow control: Hardware - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/readme.txt deleted file mode 100644 index ab00029..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/readme.txt +++ /dev/null @@ -1,123 +0,0 @@ -/** - @page USART_HyperTerminal_Interrupt USART Hyperterminal interrupt example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file USART/HyperTerminal_Interrupt/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the USART Hyperterminal interrupt example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example provides a description of how to use the EVAL_COM1 Transmit and Receive -interrupts to communicate with the hyperterminal. -EVAL_COM1 can be USART1 or USART2 depending on the STMicroelectronics EVAL board -you are using. - -First, the EVAL_COM1 sends the TxBuffer to the hyperterminal and still waiting for -a string from the hyperterminal that you must enter. -The string that you have entered is stored in the RxBuffer array. The receive -buffer have a RxBufferSize bytes as maximum (the reception is stopped when this -maximum receive value is reached). - -The EVAL_COM1 is configured as follow: - - BaudRate = 9600 baud - - Word Length = 8 Bits (7 data bit + 1 parity bit) - - Two Stop Bit - - Odd parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - -@note When the parity is enabled, the computed parity is inserted at the MSB -position of the transmitted data. - - -@par Directory contents - - - USART/HyperTerminal_Interrupt/stm32f10x_conf.h Library Configuration file - - USART/HyperTerminal_Interrupt/stm32f10x_it.h Interrupt handlers header file - - USART/HyperTerminal_Interrupt/stm32f10x_it.c Interrupt handlers source file - - USART/HyperTerminal_Interrupt/main.c Main program - - USART/HyperTerminal_Interrupt/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, High-Density - Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density - and Low-Density Value line Devices. - - - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density - Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), - STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) - evaluation boards and can be easily tailored to any other supported device - and development board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in stm32_eval.h file - - - STM32100B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN10 and PC serial port. - - - STM3210C-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN6 and PC serial port. - @note Make sure that jumpers JP19 and JP18 are open. - - - STM3210E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN12 and PC serial port. - - - STM3210B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN6 and PC serial port. - - - STM32100E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN10 and PC serial port. - - - Hyperterminal configuration: - - Word Length = 7 Bits - - Two Stop Bit - - Odd parity - - BaudRate = 9600 baud - - flow control: None - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/stm32f10x_it.c deleted file mode 100644 index 9ab0f19..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/stm32f10x_it.c +++ /dev/null @@ -1,223 +0,0 @@ -/** - ****************************************************************************** - * @file USART/HyperTerminal_Interrupt/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "stm32_eval.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_HyperTerminal_Interrupt - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#ifdef USE_STM3210C_EVAL - #define USARTx_IRQHandler USART2_IRQHandler -#else - #define USARTx_IRQHandler USART1_IRQHandler -#endif - -#define TxBufferSize (countof(TxBuffer) - 1) -#define RxBufferSize 0x20 - -/* Private macro -------------------------------------------------------------*/ -#define countof(a) (sizeof(a) / sizeof(*(a))) - -/* Private variables ---------------------------------------------------------*/ -uint8_t TxBuffer[] = "\n\rUSART Hyperterminal Interrupts Example: USART-Hyperterminal\ - communication using Interrupt\n\r"; -uint8_t RxBuffer[RxBufferSize]; -uint8_t NbrOfDataToTransfer = TxBufferSize; -uint8_t NbrOfDataToRead = RxBufferSize; -uint8_t TxCounter = 0; -uint16_t RxCounter = 0; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles USARTx global interrupt request. - * @param None - * @retval None - */ -void USARTx_IRQHandler(void) -{ - if(USART_GetITStatus(EVAL_COM1, USART_IT_RXNE) != RESET) - { - /* Read one byte from the receive data register */ - RxBuffer[RxCounter++] = (USART_ReceiveData(EVAL_COM1) & 0x7F); - - if(RxCounter == NbrOfDataToRead) - { - /* Disable the EVAL_COM1 Receive interrupt */ - USART_ITConfig(EVAL_COM1, USART_IT_RXNE, DISABLE); - } - } - - if(USART_GetITStatus(EVAL_COM1, USART_IT_TXE) != RESET) - { - /* Write one byte to the transmit data register */ - USART_SendData(EVAL_COM1, TxBuffer[TxCounter++]); - - if(TxCounter == NbrOfDataToTransfer) - { - /* Disable the EVAL_COM1 Transmit interrupt */ - USART_ITConfig(EVAL_COM1, USART_IT_TXE, DISABLE); - } - } -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/stm32f10x_it.h deleted file mode 100644 index d4c63a5..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/HyperTerminal_Interrupt/stm32f10x_it.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - ****************************************************************************** - * @file USART/HyperTerminal_Interrupt/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/main.c deleted file mode 100644 index 6ce1d06..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/main.c +++ /dev/null @@ -1,224 +0,0 @@ -/** - ****************************************************************************** - * @file USART/IrDA/Receive/main.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main program body - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" -#include "platform_config.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_IrDA_Receive - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -USART_InitTypeDef USART_InitStructure; -JOYState_TypeDef ReceivedData = JOY_NONE; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief Main program - * @param None - * @retval None - */ -int main(void) -{ - /*!< At this stage the microcontroller clock setting is already configured, - this is done through SystemInit() function which is called from startup - file (startup_stm32f10x_xx.s) before to branch to application main. - To reconfigure the default setting of SystemInit() function, refer to - system_stm32f10x.c file - */ - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* Configure the GPIO ports */ - GPIO_Configuration(); - - /* Initialize Leds mounted on STM3210X-EVAL board */ - STM_EVAL_LEDInit(LED1); - STM_EVAL_LEDInit(LED2); - STM_EVAL_LEDInit(LED3); - STM_EVAL_LEDInit(LED4); - -/* USARTy configuration ------------------------------------------------------*/ - /* USARTy configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - */ - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No ; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - - /* Configure the USARTy */ - USART_Init(USARTy, &USART_InitStructure); - /* Enable the USARTy */ - USART_Cmd(USARTy, ENABLE); - - /* Set the USARTy prescaler */ - USART_SetPrescaler(USARTy, 0x1); - /* Configure the USARTy IrDA mode */ - USART_IrDAConfig(USARTy, USART_IrDAMode_Normal); - - /* Enable the USARTy IrDA mode */ - USART_IrDACmd(USARTy, ENABLE); - - while (1) - { - /* Wait until a byte is received */ - while(USART_GetFlagStatus(USARTy, USART_FLAG_RXNE) == RESET) - { - } - /* Read the received byte */ - ReceivedData = (JOYState_TypeDef)USART_ReceiveData(USARTy); - - switch(ReceivedData) - { - case JOY_UP: - STM_EVAL_LEDOn(LED1); - STM_EVAL_LEDOff(LED2); - STM_EVAL_LEDOff(LED3); - STM_EVAL_LEDOff(LED4); - break; - case JOY_DOWN: - STM_EVAL_LEDOn(LED2); - STM_EVAL_LEDOff(LED1); - STM_EVAL_LEDOff(LED3); - STM_EVAL_LEDOff(LED4); - break; - case JOY_LEFT: - STM_EVAL_LEDOn(LED3); - STM_EVAL_LEDOff(LED1); - STM_EVAL_LEDOff(LED2); - STM_EVAL_LEDOff(LED4); - break; - case JOY_RIGHT: - STM_EVAL_LEDOn(LED4); - STM_EVAL_LEDOff(LED1); - STM_EVAL_LEDOff(LED2); - STM_EVAL_LEDOff(LED3); - break; - case JOY_SEL: - STM_EVAL_LEDOn(LED1); - STM_EVAL_LEDOn(LED2); - STM_EVAL_LEDOn(LED3); - STM_EVAL_LEDOn(LED4); - break; - case JOY_NONE: - break; - default: - break; - } - } -} - -/** - * @brief Configures the different system clocks. - * @param None - * @retval None - */ -void RCC_Configuration(void) -{ - /* Enable GPIO clock */ - RCC_APB2PeriphClockCmd(USARTy_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE); - - /* Enable USARTy clocks */ - RCC_APB1PeriphClockCmd(USARTy_CLK, ENABLE); -} - -/** - * @brief Configures the different GPIO ports. - * @param None - * @retval None - */ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - -#ifndef USE_STM3210C_EVAL - /* Enable the USART3 Pins Partial Software Remapping */ - GPIO_PinRemapConfig(GPIO_PartialRemap_USART3, ENABLE); -#else - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); -#endif - - /* Configure USARTy Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = USARTy_TxPin; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); - - /* Configure USARTy Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = USARTy_RxPin; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); -} - -#ifdef USE_FULL_ASSERT - -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/platform_config.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/platform_config.h deleted file mode 100644 index 4b77212..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Receive/platform_config.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - ****************************************************************************** - * @file USART/IrDA/Receive/platform_config.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Evaluation board specific configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32_eval.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM32100E_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM3210C_EVAL) - //#define USE_STM32100B_EVAL - //#define USE_STM3210B_EVAL - //#define USE_STM3210E_EVAL - //#define USE_STM32100E_EVAL - #define USE_STM3210C_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#if defined(USE_STM3210B_EVAL) || defined (USE_STM32100B_EVAL) - - #define USARTy USART3 - #define USARTy_GPIO GPIOC - #define USARTy_CLK RCC_APB1Periph_USART3 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOC - #define USARTy_RxPin GPIO_Pin_11 - #define USARTy_TxPin GPIO_Pin_10 - -#elif defined USE_STM3210E_EVAL || defined USE_STM32100E_EVAL - - #define USARTy USART3 - #define USARTy_GPIO GPIOC - #define USARTy_CLK RCC_APB1Periph_USART3 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOC - #define USARTy_RxPin GPIO_Pin_11 - #define USARTy_TxPin GPIO_Pin_10 - -#elif defined USE_STM3210C_EVAL - - #define USARTy USART2 - #define USARTy_GPIO GPIOD - #define USARTy_CLK RCC_APB1Periph_USART2 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOD - #define USARTy_RxPin GPIO_Pin_6 - #define USARTy_TxPin GPIO_Pin_5 - -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Transmit/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Transmit/stm32f10x_it.c deleted file mode 100644 index c42cbb8..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Transmit/stm32f10x_it.c +++ /dev/null @@ -1,167 +0,0 @@ -/** - ****************************************************************************** - * @file USART/IrDA/Transmit/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_IrDA_Transmit - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Transmit/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Transmit/stm32f10x_it.h deleted file mode 100644 index 11bde98..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/IrDA/Transmit/stm32f10x_it.h +++ /dev/null @@ -1,47 +0,0 @@ -/** - ****************************************************************************** - * @file USART/IrDA/Transmit/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c deleted file mode 100644 index 7983890..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c +++ /dev/null @@ -1,237 +0,0 @@ -/** - ****************************************************************************** - * @file USART/MultiProcessor/main.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main program body - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" -#include "platform_config.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_MultiProcessor - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -USART_InitTypeDef USART_InitStructure; - -/* Private function prototypes -----------------------------------------------*/ -void RCC_Configuration(void); -void GPIO_Configuration(void); -void Delay(__IO uint32_t nCount); - -/* Private functions ---------------------------------------------------------*/ -/** - * @brief Main program - * @param None - * @retval None - */ -int main(void) -{ - /*!< At this stage the microcontroller clock setting is already configured, - this is done through SystemInit() function which is called from startup - file (startup_stm32f10x_xx.s) before to branch to application main. - To reconfigure the default setting of SystemInit() function, refer to - system_stm32f10x.c file - */ - - /* System Clocks Configuration */ - RCC_Configuration(); - - /* Configure the GPIO ports */ - GPIO_Configuration(); - - /* Initialize Leds, Wakeup and Key Buttons mounted on STM3210X-EVAL board */ - STM_EVAL_LEDInit(LED1); - STM_EVAL_LEDInit(LED2); - STM_EVAL_LEDInit(LED3); - STM_EVAL_LEDInit(LED4); - STM_EVAL_PBInit(BUTTON_WAKEUP, BUTTON_MODE_EXTI); - STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_EXTI); - -/* USARTy and USARTz configuration -------------------------------------------*/ - /* USARTy and USARTz configured as follow: - - BaudRate = 9600 baud - - Word Length = 9 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - */ - USART_InitStructure.USART_BaudRate = 9600; - USART_InitStructure.USART_WordLength = USART_WordLength_9b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - - /* Configure USARTy */ - USART_Init(USARTy, &USART_InitStructure); - /* Configure USARTz */ - USART_Init(USARTz, &USART_InitStructure); - - /* Enable the USARTy */ - USART_Cmd(USARTy, ENABLE); - /* Enable the USARTz */ - USART_Cmd(USARTz, ENABLE); - - /* Set the USARTy Address */ - USART_SetAddress(USARTy, 0x1); - /* Set the USARTz Address */ - USART_SetAddress(USARTz, 0x2); - - /* Select the USARTz WakeUp Method */ - USART_WakeUpConfig(USARTz, USART_WakeUp_AddressMark); - - while (1) - { - /* Send one byte from USARTy to USARTz */ - USART_SendData(USARTy, 0x33); - - /* Wait while USART1 TXE = 0 */ - while(USART_GetFlagStatus(USARTz, USART_FLAG_TXE) == RESET) - { - } - - if(USART_GetFlagStatus(USARTz, USART_FLAG_RXNE) != RESET) - { - if(USART_ReceiveData(USARTz) == 0x33) - { - STM_EVAL_LEDToggle(LED1); - Delay(0x5FFFF); - STM_EVAL_LEDToggle(LED2); - Delay(0x5FFFF); - STM_EVAL_LEDToggle(LED3); - Delay(0x5FFFF); - STM_EVAL_LEDToggle(LED4); - Delay(0x5FFFF); - } - } - } -} - -/** - * @brief Configures the different system clocks. - * @param None - * @retval None - */ -void RCC_Configuration(void) -{ - /* Enable GPIO clock */ - RCC_APB2PeriphClockCmd(USARTy_GPIO_CLK | USARTz_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE); - -#ifndef USE_STM3210C_EVAL - /* Enable USARTy Clock */ - RCC_APB2PeriphClockCmd(USARTy_CLK, ENABLE); -#else - /* Enable USARTy Clock */ - RCC_APB1PeriphClockCmd(USARTy_CLK, ENABLE); -#endif - /* Enable USARTz Clock */ - RCC_APB1PeriphClockCmd(USARTz_CLK, ENABLE); -} - -/** - * @brief Configures the different GPIO ports. - * @param None - * @retval None - */ -void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - -#ifdef USE_STM3210C_EVAL - /* Enable the USART3 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_PartialRemap_USART3, ENABLE); - - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); -#elif defined(USE_STM3210B_EVAL) || defined(USE_STM32100B_EVAL) - /* Enable the USART2 Pins Software Remapping */ - GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); -#endif - - /* Configure USARTy Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = USARTy_RxPin; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); - - /* Configure USARTz Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = USARTz_RxPin; - GPIO_Init(USARTz_GPIO, &GPIO_InitStructure); - - /* Configure USARTy Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = USARTy_TxPin; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); - - /* Configure USARTz Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = USARTz_TxPin; - GPIO_Init(USARTz_GPIO, &GPIO_InitStructure); -} - -/** - * @brief Inserts a delay time. - * @param nCount: specifies the delay time length. - * @retval None - */ -void Delay(__IO uint32_t nCount) -{ - /* Decrement nCount value */ - for(; nCount != 0; nCount--); -} - -#ifdef USE_FULL_ASSERT - -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/platform_config.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/platform_config.h deleted file mode 100644 index 2835317..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/platform_config.h +++ /dev/null @@ -1,97 +0,0 @@ -/** - ****************************************************************************** - * @file USART/MultiProcessor/platform_config.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Evaluation board specific configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32_eval.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM3210C_EVAL) && !defined (USE_STM32100E_EVAL) - //#define USE_STM32100B_EVAL - //#define USE_STM3210B_EVAL - //#define USE_STM3210E_EVAL - //#define USE_STM32100E_EVAL - #define USE_STM3210C_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#if defined(USE_STM3210B_EVAL) || defined (USE_STM32100B_EVAL) - - #define USARTy USART1 - #define USARTy_GPIO GPIOA - #define USARTy_CLK RCC_APB2Periph_USART1 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOA - #define USARTy_RxPin GPIO_Pin_10 - #define USARTy_TxPin GPIO_Pin_9 - - #define USARTz USART2 - #define USARTz_GPIO GPIOD - #define USARTz_CLK RCC_APB1Periph_USART2 - #define USARTz_GPIO_CLK RCC_APB2Periph_GPIOD - #define USARTz_RxPin GPIO_Pin_6 - #define USARTz_TxPin GPIO_Pin_5 - -#elif defined USE_STM3210E_EVAL || defined (USE_STM32100E_EVAL) - - #define USARTy USART1 - #define USARTy_GPIO GPIOA - #define USARTy_CLK RCC_APB2Periph_USART1 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOA - #define USARTy_RxPin GPIO_Pin_10 - #define USARTy_TxPin GPIO_Pin_9 - - #define USARTz USART2 - #define USARTz_GPIO GPIOA - #define USARTz_CLK RCC_APB1Periph_USART2 - #define USARTz_GPIO_CLK RCC_APB2Periph_GPIOA - #define USARTz_RxPin GPIO_Pin_3 - #define USARTz_TxPin GPIO_Pin_2 - -#elif defined USE_STM3210C_EVAL - - #define USARTy USART2 - #define USARTy_GPIO GPIOD - #define USARTy_CLK RCC_APB1Periph_USART2 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOD - #define USARTy_RxPin GPIO_Pin_6 - #define USARTy_TxPin GPIO_Pin_5 - - #define USARTz USART3 - #define USARTz_GPIO GPIOC - #define USARTz_CLK RCC_APB1Periph_USART3 - #define USARTz_GPIO_CLK RCC_APB2Periph_GPIOC - #define USARTz_RxPin GPIO_Pin_11 - #define USARTz_TxPin GPIO_Pin_10 - -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/stm32f10x_it.c deleted file mode 100644 index 2cbd686..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/stm32f10x_it.c +++ /dev/null @@ -1,211 +0,0 @@ -/** - ****************************************************************************** - * @file USART/MultiProcessor/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_MultiProcessor - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles External interrupt Line 0 request. - * @param None - * @retval None - */ -void EXTI0_IRQHandler(void) -{ - /* Send the address mark (0x102) to wakeup USARTz */ - USART_SendData(USARTy, 0x102); - - /* Wait while USARTy TXE = 0 */ - while(USART_GetFlagStatus(USARTy, USART_FLAG_TXE) == RESET) - { - } - - /* Clear EXTI Line 0 Pending Bit */ - EXTI_ClearITPendingBit(EXTI_Line0); -} - -/** - * @brief This function handles External lines 9 to 5 interrupt request. - * @param None - * @retval None - */ -void EXTI9_5_IRQHandler(void) -{ - if(EXTI_GetITStatus(KEY_BUTTON_EXTI_LINE) != RESET) - { - /* Flush DR register and clear the USARTz RXNE flag */ - USART_ReceiveData(USARTz); - - /* Enable the USARTz mute mode*/ - USART_ReceiverWakeUpCmd(USARTz, ENABLE); - - /* Clear Key Button EXTI Line Pending Bit */ - EXTI_ClearITPendingBit(KEY_BUTTON_EXTI_LINE); - } -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/stm32f10x_it.h deleted file mode 100644 index 5f3b882..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/stm32f10x_it.h +++ /dev/null @@ -1,48 +0,0 @@ -/** - ****************************************************************************** - * @file USART/MultiProcessor/stm32f10x_it.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -void EXTI0_IRQHandler(void); -void EXTI9_5_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/system_stm32f10x.c deleted file mode 100644 index 63d39d3..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/system_stm32f10x.c +++ /dev/null @@ -1,1094 +0,0 @@ -/** - ****************************************************************************** - * @file USART/MultiProcessor/system_stm32f10x.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f10x_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 3. If the system clock source selected by user fails to startup, the SystemInit() - * function will do nothing and HSI still used as system clock source. User can - * add some code to deal with this issue inside the SetSysClock() function. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on - * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** @addtogroup STM32F10x_System_Private_Includes - * @{ - */ - -#include "stm32f10x.h" - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Defines - * @{ - */ - -/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) - frequency (after reset the HSI is used as SYSCLK source) - - IMPORTANT NOTE: - ============== - 1. After each device reset the HSI is used as System clock source. - - 2. Please make sure that the selected System clock doesn't exceed your device's - maximum frequency. - - 3. If none of the define below is enabled, the HSI is used as System clock - source. - - 4. The System clock configuration functions provided within this file assume that: - - For Low, Medium and High density Value line devices an external 8MHz - crystal is used to drive the System clock. - - For Low, Medium and High density devices an external 8MHz crystal is - used to drive the System clock. - - For Connectivity line devices an external 25MHz crystal is used to drive - the System clock. - If you are using different crystal you have to adapt those functions accordingly. - */ - -#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ - #define SYSCLK_FREQ_24MHz 24000000 -#else -/* #define SYSCLK_FREQ_HSE HSE_VALUE */ -/* #define SYSCLK_FREQ_24MHz 24000000 */ -/* #define SYSCLK_FREQ_36MHz 36000000 */ -/* #define SYSCLK_FREQ_48MHz 48000000 */ -/* #define SYSCLK_FREQ_56MHz 56000000 */ -#define SYSCLK_FREQ_72MHz 72000000 -#endif - -/*!< Uncomment the following line if you need to use external SRAM mounted - on STM3210E-EVAL board (STM32 High density and XL-density devices) or on - STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) -/* #define DATA_IN_ExtSRAM */ -#endif - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#ifdef SYSCLK_FREQ_HSE - uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_24MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_36MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_48MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_56MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ -#elif defined SYSCLK_FREQ_72MHz - uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ -#else /*!< HSI Selected as System Clock source */ - uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ -#endif - -__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_FunctionPrototypes - * @{ - */ - -static void SetSysClock(void); - -#ifdef SYSCLK_FREQ_HSE - static void SetSysClockToHSE(void); -#elif defined SYSCLK_FREQ_24MHz - static void SetSysClockTo24(void); -#elif defined SYSCLK_FREQ_36MHz - static void SetSysClockTo36(void); -#elif defined SYSCLK_FREQ_48MHz - static void SetSysClockTo48(void); -#elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); -#elif defined SYSCLK_FREQ_72MHz - static void SetSysClockTo72(void); -#endif - -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifdef STM32F10X_CL - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - - /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ - /* Configure the Flash Latency cycles and enable prefetch buffer */ - SetSysClock(); - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depedning on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#ifdef STM32F10X_CL - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F10X_CL */ - -#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - uint32_t prediv1factor = 0; -#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#ifndef STM32F10X_CL - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F10X_CL */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -/** - * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. - * @param None - * @retval None - */ -static void SetSysClock(void) -{ -#ifdef SYSCLK_FREQ_HSE - SetSysClockToHSE(); -#elif defined SYSCLK_FREQ_24MHz - SetSysClockTo24(); -#elif defined SYSCLK_FREQ_36MHz - SetSysClockTo36(); -#elif defined SYSCLK_FREQ_48MHz - SetSysClockTo48(); -#elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); -#elif defined SYSCLK_FREQ_72MHz - SetSysClockTo72(); -#endif - - /* If none of the define above is enabled, the HSI is used as System clock - source (default after reset) */ -} - -/** - * @brief Setup the external memory controller. Called in startup_stm32f10x.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f10x_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ -/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001011; - FSMC_Bank1->BTCR[5] = 0x00000200; -} -#endif /* DATA_IN_ExtSRAM */ - -#ifdef SYSCLK_FREQ_HSE -/** - * @brief Selects HSE as System clock source and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockToHSE(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - -#ifndef STM32F10X_CL - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#else - if (HSE_VALUE <= 24000000) - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; - } - else - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - } -#endif /* STM32F10X_CL */ -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - - /* Select HSE as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; - - /* Wait till HSE is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_24MHz -/** - * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo24(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { -#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#endif - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); - - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } -#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_36MHz -/** - * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo36(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); - - /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - -#else - /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#elif defined SYSCLK_FREQ_48MHz -/** - * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo48(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_56MHz -/** - * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo56(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL7); -#else - /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); - -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} - -#elif defined SYSCLK_FREQ_72MHz -/** - * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo72(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); -#else - /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | - RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - } -} -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Polling/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Polling/readme.txt deleted file mode 100644 index 64afdd3..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Polling/readme.txt +++ /dev/null @@ -1,119 +0,0 @@ -/** - @page USART_Polling USART Polling example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file USART/Polling/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the USART Polling example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example provides a basic communication between USARTy and USARTz using flags. -USARTy and USARTz can be USART1 and USART2 or USART2 and USART3, depending on -the STMicroelectronics EVAL board you are using. - -First, the USARTy sends TxBuffer to USARTz. The USARTz reads the received data and -store it into RxBuffer. -The received data is then compared with the send ones and the result of this -comparison is stored in the "TransferStatus" variable. - -USARTy and USARTz configured as follow: - - BaudRate = 230400 baud - - Word Length = 8 Bits - - One Stop Bit - - Even parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - - -@par Directory contents - - - USART/Polling/platform_config.h Evaluation board specific configuration file - - USART/Polling/stm32f10x_conf.h Library Configuration file - - USART/Polling/stm32f10x_it.h Interrupt handlers header file - - USART/Polling/stm32f10x_it.c Interrupt handlers - - USART/Polling/main.c Main program - - USART/Polling/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, High-Density - Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density - and Low-Density Value line Devices. - - - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density - Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), - STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) - evaluation boards and can be easily tailored to any other supported device - and development board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in USART/Polling/platform_config.h file - - - STM32100E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN10 (USART1) and - CN5 (USART2). - @ note Make sure that jumper JP5 is not open. - - - STM32100B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN10 (USART1) and - CN9 (USART2). - @note In this case USART2 Tx and Rx pins are remapped by software on PD.05 - and PD.06 respectively. - - - STM3210C-EVAL Set-up - - Connect USART2 Tx pin (PD.05) to USART3 Rx pin (PC.11) - - Connect USART2 Rx pin (PD.06) to USART3 Tx pin (PC.10) - @note In this case USART3 Tx and Rx pins are remapped by software. - Make sure that jumpers JP19 and JP18 are open. - - - STM3210E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN12 (USART1) and - CN8 (USART2). - - - STM3210B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between CN6 (USART1) and - CN5 (USART2). - - In this case USART2 Tx and Rx pins are remapped by software on PD.05 - and PD.06 respectively. - - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/main.c deleted file mode 100644 index e253b50..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/** - ****************************************************************************** - * @file USART/Printf/main.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main program body - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" -#include "stm32_eval.h" -#include <stdio.h> - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_Printf - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -USART_InitTypeDef USART_InitStructure; - -/* Private function prototypes -----------------------------------------------*/ - -#ifdef __GNUC__ - /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf - set to 'Yes') calls __io_putchar() */ - #define PUTCHAR_PROTOTYPE int __io_putchar(int ch) -#else - #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f) -#endif /* __GNUC__ */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @brief Main program - * @param None - * @retval None - */ -int main(void) -{ - /*!< At this stage the microcontroller clock setting is already configured, - this is done through SystemInit() function which is called from startup - file (startup_stm32f10x_xx.s) before to branch to application main. - To reconfigure the default setting of SystemInit() function, refer to - system_stm32f10x.c file - */ - - /* USARTx configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - */ - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - - STM_EVAL_COMInit(COM1, &USART_InitStructure); - - /* Output a message on Hyperterminal using printf function */ - printf("\n\rUSART Printf Example: retarget the C library printf function to the USART\n\r"); - - while (1) - { - } -} - -/** - * @brief Retargets the C library printf function to the USART. - * @param None - * @retval None - */ -PUTCHAR_PROTOTYPE -{ - /* Place your implementation of fputc here */ - /* e.g. write a character to the USART */ - USART_SendData(EVAL_COM1, (uint8_t) ch); - - /* Loop until the end of transmission */ - while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET) - {} - - return ch; -} - -#ifdef USE_FULL_ASSERT - -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t* file, uint32_t line) -{ - /* User can add his own implementation to report the file name and line number, - ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - - /* Infinite loop */ - while (1) - { - } -} - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/readme.txt deleted file mode 100644 index b0fd1fd..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Printf/readme.txt +++ /dev/null @@ -1,113 +0,0 @@ -/** - @page USART_Printf USART Printf example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file USART/Printf/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the USART Printf example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example shows how to retarget the C library printf function to the USART. -This implementation output the printf message on the Hyperterminal using USARTx. -USARTx can be USART1 or USART2 depending on the EVAL board you are using. - -The USARTx is configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - - -@par Directory contents - - - USART/Printf/stm32f10x_conf.h Library Configuration file - - USART/Printf/stm32f10x_it.h Interrupt handlers header file - - USART/Printf/stm32f10x_it.c Interrupt handlers - - USART/Printf/main.c Main program - - USART/Printf/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, High-Density - Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density - and Low-Density Value line Devices. - - - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density - Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), - STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) - evaluation boards and can be easily tailored to any other supported device - and development board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL) - - - STM32100E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN10 and PC serial port. - - - STM32100B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN10 and PC serial port. - - - STM3210C-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN6 (USART2) and PC serial port. - @note Make sure that jumpers JP19 and JP18 are open. - - - STM3210E-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN12(when USART1 is used) and PC serial port. - - - STM3210B-EVAL Set-up - - Connect a null-modem female/female RS232 cable between the DB9 connector - CN6(when USART1 is used) and PC serial port. - - - Hyperterminal configuration: - - Word Length = 8 Bits - - One Stop Bit - - No parity - - BaudRate = 115200 baud - - flow control: None - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt deleted file mode 100644 index e5551b5..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt +++ /dev/null @@ -1,116 +0,0 @@ -/** - @page USART_Smartcard USART Smartcard example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file USART/Smartcard/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the USART Smartcard example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example provides a description of how to use the USART in Smartcard mode. -The example gives only the possibility to read the ATR and decode it into -predefined buffer. -First, the code is waiting for an card insertion. If a card is detected through -the EXTI Line interrupt (connected to the Smartcard detect pin), a reset signal -is applied to the card through its reset pin. -As response to this reset, the card transmit the ATR which will be stored in -predefined buffer. Once the ATR is received, it is decoded and stored in a specific -structure (SC_A2R) and the card protocol type is stored in a variable. -ATRDecodeStatus variable must be equal to 1 (PASSED) when the sequence succeed. - -The used Smartcard should be ISO7816-3 T=0 compatible. - -SC_USART configured as follow: - - Word Length = 9 Bits - - 0.5 Stop Bit - - Even parity - - BaudRate = 12096 baud - - Hardware flow control disabled (RTS and CTS signals) - - Tx and Rx enabled - - USART Clock enabled - - USART CPOL: Clock is active low - - USART CPHA: Data is captured on the second edge - - USART LastBit: The clock pulse of the last data bit is not output to - the SCLK pin - - -@par Directory contents - - - USART/Smartcard/platform_config.h Evaluation board specific configuration file - - USART/Smartcard/stm32f10x_conf.h Library Configuration file - - USART/Smartcard/stm32f10x_it.h Interrupt handlers header file - - USART/Smartcard/stm32f10x_it.c Interrupt handlers - - USART/Smartcard/main.c Main program - - USART/Smartcard/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, High-Density - Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density - and Low-Density Value line Devices. - - - This example has been tested with STMicroelectronics STM3210C-EVAL (Connectivity line), - STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) - evaluation boards and can be easily tailored to any other supported device and - development board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in USART/Smartcard/platform_config.h file - - - STM3210C-EVAL Set-up - - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard - connector CN5. - @note In this case USART3 Tx and CK pins are full remapped by software. - Make sure that Jumper 11 (JP11), Jumper 12 (JP12) and Jumper 13 (JP13) - are in position 1<-->2. - - - STM3210E-EVAL Set-up - - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard - connector CN18. - @note Make sure that Jumper 15 (JP15) and Jumper 16 (JP16) are fitted. - - - STM3210B-EVAL Set-up - - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard - connector CN16. - - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/stm32f10x_conf.h deleted file mode 100644 index 938cc84..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/stm32f10x_conf.h +++ /dev/null @@ -1,77 +0,0 @@ -/** - ****************************************************************************** - * @file USART/Smartcard/stm32f10x_conf.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Library configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ -#include "stm32f10x_adc.h" -#include "stm32f10x_bkp.h" -#include "stm32f10x_can.h" -#include "stm32f10x_cec.h" -#include "stm32f10x_crc.h" -#include "stm32f10x_dac.h" -#include "stm32f10x_dbgmcu.h" -#include "stm32f10x_dma.h" -#include "stm32f10x_exti.h" -#include "stm32f10x_flash.h" -#include "stm32f10x_fsmc.h" -#include "stm32f10x_gpio.h" -#include "stm32f10x_i2c.h" -#include "stm32f10x_iwdg.h" -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" -#include "stm32f10x_rtc.h" -#include "stm32f10x_sdio.h" -#include "stm32f10x_spi.h" -#include "stm32f10x_tim.h" -#include "stm32f10x_usart.h" -#include "stm32f10x_wwdg.h" -#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to expanse the "assert_param" macro in the - Standard Peripheral Library drivers code */ -/* #define USE_FULL_ASSERT 1 */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT - -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function which reports - * the name of the source file and the source line number of the call - * that failed. If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/stm32f10x_it.c deleted file mode 100644 index f69365d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/stm32f10x_it.c +++ /dev/null @@ -1,245 +0,0 @@ -/** - ****************************************************************************** - * @file USART/Smartcard/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include "platform_config.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup USART_Smartcard - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -extern __IO uint32_t CardInserted; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles External lines 9 to 5 interrupt request. - * @param None - * @retval None - */ -void EXTI9_5_IRQHandler(void) -{ - /* Select Smart Card CMDVCC */ - GPIO_ResetBits(GPIO_CMDVCC, SC_CMDVCC); - - /* Set RSTIN LOW */ - GPIO_ResetBits(GPIO_RESET, SC_RESET); - - /* Set RSTIN HIGH */ - GPIO_SetBits(GPIO_RESET, SC_RESET); - - /* Clear SC EXTIT Line Pending Bit */ - EXTI_ClearITPendingBit(SC_EXTI); - - /* Smart card detected */ - CardInserted = 1; -} - -/** - * @brief This function handles SC_USART global interrupt request. - * @param None - * @retval None - */ -void SC_USART_IRQHandler(void) -{ - /* If the SC_USART detects a parity error */ - if(USART_GetITStatus(SC_USART, USART_IT_PE) != RESET) - { - /* Enable SC_USART RXNE Interrupt (until receiving the corrupted byte) */ - USART_ITConfig(SC_USART, USART_IT_RXNE, ENABLE); - /* Flush the SC_USART DR register */ - USART_ReceiveData(SC_USART); - } - - if(USART_GetITStatus(SC_USART, USART_IT_RXNE) != RESET) - { - /* Disable SC_USART RXNE Interrupt */ - USART_ITConfig(SC_USART, USART_IT_RXNE, DISABLE); - USART_ReceiveData(SC_USART); - } -} - -/** - * @brief This function handles External lines 15 to 10 interrupt request. - * @param None - * @retval None - */ -void EXTI15_10_IRQHandler(void) -{ - /* Select Smart Card CMDVCC */ - GPIO_ResetBits(GPIO_CMDVCC, SC_CMDVCC); - - /* Set RSTIN LOW */ - GPIO_ResetBits(GPIO_RESET, SC_RESET); - - /* Set RSTIN HIGH */ - GPIO_SetBits(GPIO_RESET, SC_RESET); - - /* Clear SC EXTIT Line Pending Bit */ - EXTI_ClearITPendingBit(SC_EXTI); - - /* Smart card detected */ - CardInserted = 1; -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Synchronous/platform_config.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Synchronous/platform_config.h deleted file mode 100644 index 9317b58..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Synchronous/platform_config.h +++ /dev/null @@ -1,83 +0,0 @@ -/** - ****************************************************************************** - * @file USART/Synchronous/platform_config.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Evaluation board specific configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __PLATFORM_CONFIG_H -#define __PLATFORM_CONFIG_H - -/* Includes ------------------------------------------------------------------*/ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line corresponding to the STMicroelectronics evaluation board - used to run the example */ -#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM32100E_EVAL) - //#define USE_STM32100B_EVAL - //#define USE_STM3210B_EVAL - //#define USE_STM32100E_EVAL - #define USE_STM3210E_EVAL -#endif - -/* Define the STM32F10x hardware depending on the used evaluation board */ -#if defined(USE_STM3210B_EVAL) || defined (USE_STM32100B_EVAL) - - #define USARTy USART1 - #define USARTy_GPIO GPIOA - #define USARTy_CLK RCC_APB2Periph_USART1 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOA - #define USARTy_RxPin GPIO_Pin_10 - #define USARTy_TxPin GPIO_Pin_9 - #define USARTy_ClkPin GPIO_Pin_8 - - #define SPIy SPI1 - #define SPIy_GPIO GPIOA - #define SPIy_CLK RCC_APB2Periph_SPI1 - #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOA - #define SPIy_SCKPin GPIO_Pin_5 - #define SPIy_MISOPin GPIO_Pin_6 - #define SPIy_MOSIPin GPIO_Pin_7 - -#elif defined USE_STM3210E_EVAL || defined USE_STM32100E_EVAL - - #define USARTy USART1 - #define USARTy_GPIO GPIOA - #define USARTy_CLK RCC_APB2Periph_USART1 - #define USARTy_GPIO_CLK RCC_APB2Periph_GPIOA - #define USARTy_RxPin GPIO_Pin_10 - #define USARTy_TxPin GPIO_Pin_9 - #define USARTy_ClkPin GPIO_Pin_8 - - #define SPIy SPI1 - #define SPIy_GPIO GPIOA - #define SPIy_CLK RCC_APB2Periph_SPI1 - #define SPIy_GPIO_CLK RCC_APB2Periph_GPIOA - #define SPIy_SCKPin GPIO_Pin_5 - #define SPIy_MISOPin GPIO_Pin_6 - #define SPIy_MOSIPin GPIO_Pin_7 - -#endif /* USE_STM3210B_EVAL */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __PLATFORM_CONFIG_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |