diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM3210C_EVAL/stm3210c_eval.h')
| -rw-r--r-- | tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM3210C_EVAL/stm3210c_eval.h | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM3210C_EVAL/stm3210c_eval.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM3210C_EVAL/stm3210c_eval.h new file mode 100644 index 0000000..469693f --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Utilities/STM32_EVAL/STM3210C_EVAL/stm3210c_eval.h @@ -0,0 +1,277 @@ +/** + ****************************************************************************** + * @file stm3210c_eval.h + * @author MCD Application Team + * @version V4.5.0 + * @date 07-March-2011 + * @brief This file contains definitions for STM3210C_EVAL's Leds, push-buttons + * COM ports, SD Card on SPI and sEE on I2C hardware resources. + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + * <h2><center>© COPYRIGHT 210 STMicroelectronics</center></h2> + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM3210C_EVAL_H +#define __STM3210C_EVAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32_eval.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32_EVAL + * @{ + */ + +/** @addtogroup STM3210C_EVAL + * @{ + */ + +/** @addtogroup STM3210C_EVAL_LOW_LEVEL + * @{ + */ + +/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Types + * @{ + */ +/** + * @} + */ + +/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Constants + * @{ + */ + +/** @addtogroup STM3210C_EVAL_LOW_LEVEL_LED + * @{ + */ +#define LEDn 4 + +#define LED1_PIN GPIO_Pin_7 +#define LED1_GPIO_PORT GPIOD +#define LED1_GPIO_CLK RCC_APB2Periph_GPIOD + +#define LED2_PIN GPIO_Pin_13 +#define LED2_GPIO_PORT GPIOD +#define LED2_GPIO_CLK RCC_APB2Periph_GPIOD + +#define LED3_PIN GPIO_Pin_3 +#define LED3_GPIO_PORT GPIOD +#define LED3_GPIO_CLK RCC_APB2Periph_GPIOD + +#define LED4_PIN GPIO_Pin_4 +#define LED4_GPIO_PORT GPIOD +#define LED4_GPIO_CLK RCC_APB2Periph_GPIOD + + +/** + * @} + */ + +/** @addtogroup STM3210C_EVAL_LOW_LEVEL_BUTTON + * @{ + */ +#define BUTTONn 3 /*!< Joystick pins are connected to + an IO Expander (accessible through + I2C1 interface) */ + +/** + * @brief Wakeup push-button + */ +#define WAKEUP_BUTTON_PIN GPIO_Pin_0 +#define WAKEUP_BUTTON_GPIO_PORT GPIOA +#define WAKEUP_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOA +#define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0 +#define WAKEUP_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOA +#define WAKEUP_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource0 +#define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn + +/** + * @brief Tamper push-button + */ +#define TAMPER_BUTTON_PIN GPIO_Pin_13 +#define TAMPER_BUTTON_GPIO_PORT GPIOC +#define TAMPER_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOC +#define TAMPER_BUTTON_EXTI_LINE EXTI_Line13 +#define TAMPER_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOC +#define TAMPER_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource13 +#define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn + +/** + * @brief Key push-button + */ +#define KEY_BUTTON_PIN GPIO_Pin_9 +#define KEY_BUTTON_GPIO_PORT GPIOB +#define KEY_BUTTON_GPIO_CLK RCC_APB2Periph_GPIOB +#define KEY_BUTTON_EXTI_LINE EXTI_Line9 +#define KEY_BUTTON_EXTI_PORT_SOURCE GPIO_PortSourceGPIOB +#define KEY_BUTTON_EXTI_PIN_SOURCE GPIO_PinSource9 +#define KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn +/** + * @} + */ + +/** @addtogroup STM3210C_EVAL_LOW_LEVEL_COM + * @{ + */ +#define COMn 1 + +/** + * @brief Definition for COM port1, connected to USART2 (USART2 pins remapped on GPIOD) + */ +#define EVAL_COM1 USART2 +#define EVAL_COM1_CLK RCC_APB1Periph_USART2 +#define EVAL_COM1_TX_PIN GPIO_Pin_5 +#define EVAL_COM1_TX_GPIO_PORT GPIOD +#define EVAL_COM1_TX_GPIO_CLK RCC_APB2Periph_GPIOD +#define EVAL_COM1_RX_PIN GPIO_Pin_6 +#define EVAL_COM1_RX_GPIO_PORT GPIOD +#define EVAL_COM1_RX_GPIO_CLK RCC_APB2Periph_GPIOD +#define EVAL_COM1_IRQn USART2_IRQn + +/** + * @} + */ + +/** @addtogroup STM3210B_EVAL_SD_SPI + * @{ + */ +/** + * @brief SD SPI Interface pins + */ +#define SD_SPI SPI3 +#define SD_SPI_CLK RCC_APB1Periph_SPI3 +#define SD_SPI_SCK_PIN GPIO_Pin_10 /* PC.10 */ +#define SD_SPI_SCK_GPIO_PORT GPIOC /* GPIOC */ +#define SD_SPI_SCK_GPIO_CLK RCC_APB2Periph_GPIOC +#define SD_SPI_MISO_PIN GPIO_Pin_11 /* PC.11 */ +#define SD_SPI_MISO_GPIO_PORT GPIOC /* GPIOC */ +#define SD_SPI_MISO_GPIO_CLK RCC_APB2Periph_GPIOC +#define SD_SPI_MOSI_PIN GPIO_Pin_12 /* PC.12 */ +#define SD_SPI_MOSI_GPIO_PORT GPIOC /* GPIOC */ +#define SD_SPI_MOSI_GPIO_CLK RCC_APB2Periph_GPIOC +#define SD_CS_PIN GPIO_Pin_4 /* PA.04 */ +#define SD_CS_GPIO_PORT GPIOA /* GPIOA */ +#define SD_CS_GPIO_CLK RCC_APB2Periph_GPIOA +#define SD_DETECT_PIN GPIO_Pin_0 /* PE.00 */ +#define SD_DETECT_GPIO_PORT GPIOE /* GPIOE */ +#define SD_DETECT_GPIO_CLK RCC_APB2Periph_GPIOE + +/** + * @} + */ + +/** @addtogroup STM3210C_EVAL_LOW_LEVEL_I2C_EE + * @{ + */ +/** + * @brief I2C EEPROM Interface pins + */ +#define sEE_I2C I2C1 +#define sEE_I2C_CLK RCC_APB1Periph_I2C1 +#define sEE_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */ +#define sEE_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */ +#define sEE_I2C_SCL_GPIO_CLK RCC_APB2Periph_GPIOB +#define sEE_I2C_SDA_PIN GPIO_Pin_7 /* PB.07 */ +#define sEE_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */ +#define sEE_I2C_SDA_GPIO_CLK RCC_APB2Periph_GPIOB +#define sEE_M24C64_32 + +#define sEE_I2C_DMA DMA1 +#define sEE_I2C_DMA_CHANNEL_TX DMA1_Channel6 +#define sEE_I2C_DMA_CHANNEL_RX DMA1_Channel7 +#define sEE_I2C_DMA_FLAG_TX_TC DMA1_IT_TC6 +#define sEE_I2C_DMA_FLAG_TX_GL DMA1_IT_GL6 +#define sEE_I2C_DMA_FLAG_RX_TC DMA1_IT_TC7 +#define sEE_I2C_DMA_FLAG_RX_GL DMA1_IT_GL7 +#define sEE_I2C_DMA_CLK RCC_AHBPeriph_DMA1 +#define sEE_I2C_DR_Address ((uint32_t)0x40005410) +#define sEE_USE_DMA + +#define sEE_I2C_DMA_TX_IRQn DMA1_Channel6_IRQn +#define sEE_I2C_DMA_RX_IRQn DMA1_Channel7_IRQn +#define sEE_I2C_DMA_TX_IRQHandler DMA1_Channel6_IRQHandler +#define sEE_I2C_DMA_RX_IRQHandler DMA1_Channel7_IRQHandler +#define sEE_I2C_DMA_PREPRIO 0 +#define sEE_I2C_DMA_SUBPRIO 0 + +#define sEE_DIRECTION_TX 0 +#define sEE_DIRECTION_RX 1 + +/* Time constant for the delay caclulation allowing to have a millisecond + incrementing counter. This value should be equal to (System Clock / 1000). + ie. if system clock = 72MHz then sEE_TIME_CONST should be 72. */ +#define sEE_TIME_CONST 72 + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup STM3210C_EVAL_LOW_LEVEL_Exported_Functions + * @{ + */ +void STM_EVAL_LEDInit(Led_TypeDef Led); +void STM_EVAL_LEDOn(Led_TypeDef Led); +void STM_EVAL_LEDOff(Led_TypeDef Led); +void STM_EVAL_LEDToggle(Led_TypeDef Led); +void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); +uint32_t STM_EVAL_PBGetState(Button_TypeDef Button); +void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct); +void SD_LowLevel_DeInit(void); +void SD_LowLevel_Init(void); +void sEE_LowLevel_DeInit(void); +void sEE_LowLevel_Init(void); +void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM3210C_EVAL_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ |