o Moving generated code to under bsp/. Renaming to match PCB.

1 files changed, 0 insertions, 853 deletions

diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
deleted file mode 100644
index 8dcc87f..0000000
--- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h
+++ /dev/null
@@ -1,853 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f1xx_hal_pcd.h
-  * @author  MCD Application Team
-  * @version V1.0.4
-  * @date    29-April-2016
-  * @brief   Header file of PCD HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_PCD_H
-#define __STM32F1xx_HAL_PCD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F102x6) || defined(STM32F102xB) || \
-    defined(STM32F103x6) || defined(STM32F103xB) || \
-    defined(STM32F103xE) || defined(STM32F103xG) || \
-    defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_ll_usb.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PCD
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup PCD_Exported_Types PCD Exported Types
-  * @{
-  */
-
-/**
-  * @brief  PCD State structure definition
-  */
-typedef enum
-{
-  HAL_PCD_STATE_RESET   = 0x00,
-  HAL_PCD_STATE_READY   = 0x01,
-  HAL_PCD_STATE_ERROR   = 0x02,
-  HAL_PCD_STATE_BUSY    = 0x03,
-  HAL_PCD_STATE_TIMEOUT = 0x04
-} PCD_StateTypeDef;
-
-#if defined (USB)
-/**
-  * @brief  PCD double buffered endpoint direction
-  */
-typedef enum
-{
-  PCD_EP_DBUF_OUT,
-  PCD_EP_DBUF_IN,
-  PCD_EP_DBUF_ERR,
-}PCD_EP_DBUF_DIR;
-
-/**
-  * @brief  PCD endpoint buffer number
-  */
-typedef enum
-{
-  PCD_EP_NOBUF,
-  PCD_EP_BUF0,
-  PCD_EP_BUF1
-}PCD_EP_BUF_NUM;
-#endif /* USB */
-
-#if defined (USB_OTG_FS)
-typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
-typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
-typedef USB_OTG_EPTypeDef      PCD_EPTypeDef;
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-typedef USB_TypeDef        PCD_TypeDef;
-typedef USB_CfgTypeDef     PCD_InitTypeDef;
-typedef USB_EPTypeDef      PCD_EPTypeDef;
-#endif /* USB */
-
-/**
-  * @brief  PCD Handle Structure definition
-  */
-typedef struct
-{
-  PCD_TypeDef             *Instance;   /*!< Register base address               */
-  PCD_InitTypeDef         Init;        /*!< PCD required parameters             */
-  __IO uint8_t            USB_Address; /*!< USB Address: not used by USB OTG FS */
-  PCD_EPTypeDef           IN_ep[15];   /*!< IN endpoint parameters              */
-  PCD_EPTypeDef           OUT_ep[15];  /*!< OUT endpoint parameters             */
-  HAL_LockTypeDef         Lock;        /*!< PCD peripheral status               */
-  __IO PCD_StateTypeDef   State;       /*!< PCD communication state             */
-  uint32_t                Setup[12];   /*!< Setup packet buffer                 */
-  void                    *pData;      /*!< Pointer to upper stack Handler      */
-} PCD_HandleTypeDef;
-
-/**
-  * @}
-  */
-
-/* Include PCD HAL Extension module */
-#include "stm32f1xx_hal_pcd_ex.h"
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Constants PCD Exported Constants
-  * @{
-  */
-
-/** @defgroup PCD_Speed PCD Speed
-  * @{
-  */
-#define PCD_SPEED_HIGH                                                0 /* Not Supported */
-#define PCD_SPEED_HIGH_IN_FULL                                        1 /* Not Supported */
-#define PCD_SPEED_FULL                                                2
-/**
-  * @}
-  */
-
-/** @defgroup PCD_PHY_Module PCD PHY Module
-  * @{
-  */
-#define PCD_PHY_EMBEDDED                                              2
-/**
-  * @}
-  */
-
-/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
-  * @{
-  */
-#ifndef USBD_FS_TRDT_VALUE
- #define USBD_FS_TRDT_VALUE           5
-#endif /* USBD_FS_TRDT_VALUE */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup PCD_Exported_Macros PCD Exported Macros
- *  @brief macros to handle interrupts and specific clock configurations
- * @{
- */
-#if defined (USB_OTG_FS)
-
-#define __HAL_PCD_ENABLE(__HANDLE__)                                  USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__)                                 USB_DisableGlobalInt ((__HANDLE__)->Instance)
-
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)                 ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)               (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
-#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)                    (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
-
-#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)                         *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
-                                                                      ~(USB_OTG_PCGCCTL_STOPCLK)
-
-#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)                           *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
-
-#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)                        ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()                      EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()                     EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG()                       EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG()                     EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE()                 \
-                        do{                                               \
-                            EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
-                            EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;    \
-                          } while(0)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()                \
-                        do{                                               \
-                            EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);  \
-                            EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
-                          } while(0)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()         \
-                        do{                                               \
-                            EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
-                            EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \
-                            EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;    \
-                            EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;    \
-                          } while(0)
-
-#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT()                  (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-#define __HAL_PCD_ENABLE(__HANDLE__)                                  USB_EnableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_DISABLE(__HANDLE__)                                 USB_DisableGlobalInt ((__HANDLE__)->Instance)
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)                 ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)               (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT()                             EXTI->IMR |= USB_WAKEUP_EXTI_LINE
-#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT()                            EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
-#define __HAL_USB_WAKEUP_EXTI_GET_FLAG()                              EXTI->PR & (USB_WAKEUP_EXTI_LINE)
-#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG()                            EXTI->PR = USB_WAKEUP_EXTI_LINE
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE()                 \
-                        do{                                        \
-                            EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \
-                            EXTI->RTSR |= USB_WAKEUP_EXTI_LINE;    \
-                          } while(0)
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE()                \
-                        do{                                        \
-                            EXTI->FTSR |= (USB_WAKEUP_EXTI_LINE);  \
-                            EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \
-                          } while(0)
-
-#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()         \
-                        do{                                        \
-                            EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \
-                            EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \
-                            EXTI->RTSR |= USB_WAKEUP_EXTI_LINE;    \
-                            EXTI->FTSR |= USB_WAKEUP_EXTI_LINE;    \
-                          } while(0)
-#endif /* USB */
-
-/**
-  * @}
-  */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup PCD_Exported_Functions PCD Exported Functions
-  * @{
-  */
-
-/* Initialization/de-initialization functions  ********************************/
-/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
-  * @{
-  */
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
-/**
-  * @}
-  */
-
-/* I/O operation functions  ***************************************************/
-/* Non-Blocking mode: Interrupt */
-/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions
-  * @{
-  */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
-
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
-/**
-  * @}
-  */
-
-/* Peripheral Control functions  **********************************************/
-/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
-  * @{
-  */
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-uint16_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
-/**
-  * @}
-  */
-
-/* Peripheral State functions  ************************************************/
-/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
-  * @{
-  */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup PCD_Private_Constants PCD Private Constants
-  * @{
-  */
-/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
-  * @{
-  */
-#if defined (USB_OTG_FS)
-#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE                            ((uint32_t)0x08)
-#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE                           ((uint32_t)0x0C)
-#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE                    ((uint32_t)0x10)
-
-#define USB_OTG_FS_WAKEUP_EXTI_LINE                                   ((uint32_t)0x00040000)  /*!< External interrupt line 18 Connected to the USB EXTI Line */
-#endif /* USB_OTG_FS */
-
-#if defined (USB)
-#define  USB_WAKEUP_EXTI_LINE                                         ((uint32_t)0x00040000)  /*!< External interrupt line 18 Connected to the USB EXTI Line */
-#endif /* USB */
-/**
-  * @}
-  */
-
-#if defined (USB)
-/** @defgroup PCD_EP0_MPS PCD EP0 MPS
-  * @{
-  */
-#define PCD_EP0MPS_64                                                 DEP0CTL_MPS_64
-#define PCD_EP0MPS_32                                                 DEP0CTL_MPS_32
-#define PCD_EP0MPS_16                                                 DEP0CTL_MPS_16
-#define PCD_EP0MPS_08                                                 DEP0CTL_MPS_8
-/**
-  * @}
-  */
-
-/** @defgroup PCD_ENDP PCD ENDP
-  * @{
-  */
-#define PCD_ENDP0                                                     ((uint8_t)0)
-#define PCD_ENDP1                                                     ((uint8_t)1)
-#define PCD_ENDP2                                                     ((uint8_t)2)
-#define PCD_ENDP3                                                     ((uint8_t)3)
-#define PCD_ENDP4                                                     ((uint8_t)4)
-#define PCD_ENDP5                                                     ((uint8_t)5)
-#define PCD_ENDP6                                                     ((uint8_t)6)
-#define PCD_ENDP7                                                     ((uint8_t)7)
-/**
-  * @}
-  */
-
-/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
-  * @{
-  */
-#define PCD_SNG_BUF                                                   0
-#define PCD_DBL_BUF                                                   1
-/**
-  * @}
-  */
-#endif /* USB */
-/**
-  * @}
-  */
-
-/* Private macros ------------------------------------------------------------*/
-/** @addtogroup PCD_Private_Macros PCD Private Macros
- * @{
- */
-#if defined (USB)
-/* SetENDPOINT */
-#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue)  (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
-
-/* GetENDPOINT */
-#define PCD_GET_ENDPOINT(USBx, bEpNum)            (*(&(USBx)->EP0R + (bEpNum) * 2))
-
-/* ENDPOINT transfer */
-#define USB_EP0StartXfer                          USB_EPStartXfer
-
-/**
-  * @brief  sets the type in the endpoint register(bits EP_TYPE[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wType: Endpoint Type.
-  * @retval None
-  */
-#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
-                                  ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
-
-/**
-  * @brief  gets the type in the endpoint register(bits EP_TYPE[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval Endpoint Type
-  */
-#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
-
-/**
-  * @brief free buffer used from the application realizing it to the line
-          toggles bit SW_BUF in the double buffered endpoint register
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  bDir: Direction
-  * @retval None
-  */
-#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
-{\
-  if ((bDir) == PCD_EP_DBUF_OUT)\
-  { /* OUT double buffered endpoint */\
-    PCD_TX_DTOG((USBx), (bEpNum));\
-  }\
-  else if ((bDir) == PCD_EP_DBUF_IN)\
-  { /* IN double buffered endpoint */\
-    PCD_RX_DTOG((USBx), (bEpNum));\
-  }\
-}
-
-/**
-  * @brief gets direction of the double buffered endpoint
-  * @param   USBx: USB peripheral instance register address.
-  * @param   bEpNum: Endpoint Number.
-  * @retval EP_DBUF_OUT, EP_DBUF_IN,
-  *         EP_DBUF_ERR if the endpoint counter not yet programmed.
-  */
-#define PCD_GET_DB_DIR(USBx, bEpNum)\
-{\
-  if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
-    return(PCD_EP_DBUF_OUT);\
-  else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
-    return(PCD_EP_DBUF_IN);\
-  else\
-    return(PCD_EP_DBUF_ERR);\
-}
-
-/**
-  * @brief  sets the status for tx transfer (bits STAT_TX[1:0]).
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wState: new state
-  * @retval None
-  */
-#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\
-   \
-    _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
-   /* toggle first bit ? */     \
-   if((USB_EPTX_DTOG1 & (wState))!= 0)\
-   {                                                                            \
-     _wRegVal ^= USB_EPTX_DTOG1;        \
-   }                                                                            \
-   /* toggle second bit ?  */         \
-   if((USB_EPTX_DTOG2 & (wState))!= 0)      \
-   {                                                                            \
-     _wRegVal ^= USB_EPTX_DTOG2;        \
-   }                                                                            \
-   PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX));\
-  } /* PCD_SET_EP_TX_STATUS */
-
-/**
-  * @brief  sets the status for rx transfer (bits STAT_TX[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wState: new state
-  * @retval None
-  */
-#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
-    register uint16_t _wRegVal;   \
-    \
-    _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
-    /* toggle first bit ? */  \
-    if((USB_EPRX_DTOG1 & (wState))!= 0) \
-    {                                                                             \
-      _wRegVal ^= USB_EPRX_DTOG1;  \
-    }                                                                             \
-    /* toggle second bit ? */  \
-    if((USB_EPRX_DTOG2 & (wState))!= 0) \
-    {                                                                             \
-      _wRegVal ^= USB_EPRX_DTOG2;  \
-    }                                                                             \
-    PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
-  } /* PCD_SET_EP_RX_STATUS */
-
-/**
-  * @brief  sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wStaterx: new state.
-  * @param  wStatetx: new state.
-  * @retval None
-  */
-#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
-    register uint32_t _wRegVal;   \
-    \
-    _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
-    /* toggle first bit ? */  \
-    if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
-    {                                                                                    \
-      _wRegVal ^= USB_EPRX_DTOG1;  \
-    }                                                                                    \
-    /* toggle second bit ? */  \
-    if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
-    {                                                                                    \
-      _wRegVal ^= USB_EPRX_DTOG2;  \
-    }                                                                                    \
-    /* toggle first bit ? */     \
-    if((USB_EPTX_DTOG1 & (wStatetx))!= 0)      \
-    {                                                                                    \
-      _wRegVal ^= USB_EPTX_DTOG1;        \
-    }                                                                                    \
-    /* toggle second bit ?  */         \
-    if((USB_EPTX_DTOG2 & (wStatetx))!= 0)      \
-    {                                                                                    \
-      _wRegVal ^= USB_EPTX_DTOG2;        \
-    }                                                                                    \
-    PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX);    \
-  } /* PCD_SET_EP_TXRX_STATUS */
-
-/**
-  * @brief  gets the status for tx/rx transfer (bits STAT_TX[1:0]
-  *         /STAT_RX[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval status
-  */
-#define PCD_GET_EP_TX_STATUS(USBx, bEpNum)     ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
-#define PCD_GET_EP_RX_STATUS(USBx, bEpNum)     ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
-
-/**
-  * @brief  sets directly the VALID tx/rx-status into the endpoint register
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_EP_TX_VALID(USBx, bEpNum)      (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
-#define PCD_SET_EP_RX_VALID(USBx, bEpNum)      (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
-
-/**
-  * @brief  checks stall condition in an endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval TRUE = endpoint in stall condition.
-  */
-#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
-                                   == USB_EP_TX_STALL)
-#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
-                                   == USB_EP_RX_STALL)
-
-/**
-  * @brief  set & clear EP_KIND bit.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_EP_KIND(USBx, bEpNum)    (PCD_SET_ENDPOINT((USBx), (bEpNum), \
-                                (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
-#define PCD_CLEAR_EP_KIND(USBx, bEpNum)  (PCD_SET_ENDPOINT((USBx), (bEpNum), \
-                                (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
-
-/**
-  * @brief  Sets/clears directly STATUS_OUT bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_OUT_STATUS(USBx, bEpNum)       PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum)     PCD_CLEAR_EP_KIND((USBx), (bEpNum))
-
-/**
-  * @brief  Sets/clears directly EP_KIND bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_EP_DBUF(USBx, bEpNum)          PCD_SET_EP_KIND((USBx), (bEpNum))
-#define PCD_CLEAR_EP_DBUF(USBx, bEpNum)        PCD_CLEAR_EP_KIND((USBx), (bEpNum))
-
-/**
-  * @brief  Clears bit CTR_RX / CTR_TX in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum)   (PCD_SET_ENDPOINT((USBx), (bEpNum),\
-                                   PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
-#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum)   (PCD_SET_ENDPOINT((USBx), (bEpNum),\
-                                   PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
-
-/**
-  * @brief  Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_RX_DTOG(USBx, bEpNum)    (PCD_SET_ENDPOINT((USBx), (bEpNum), \
-                                   USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
-#define PCD_TX_DTOG(USBx, bEpNum)    (PCD_SET_ENDPOINT((USBx), (bEpNum), \
-                                   USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
-
-/**
-  * @brief  Clears DTOG_RX / DTOG_TX bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_CLEAR_RX_DTOG(USBx, bEpNum)  if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
-                                         {                                                              \
-                                           PCD_RX_DTOG((USBx), (bEpNum));                               \
-                                         }
-#define PCD_CLEAR_TX_DTOG(USBx, bEpNum)  if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
-                                         {                                                              \
-                                            PCD_TX_DTOG((USBx), (bEpNum));                              \
-                                         }
-
-/**
-  * @brief  Sets address in an endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  bAddr: Address.
-  * @retval None
-  */
-#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
-    USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
-
-#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
-
-#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8)*2+     ((uint32_t)(USBx) + 0x400)))
-#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+2)*2+  ((uint32_t)(USBx) + 0x400)))
-#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+4)*2+  ((uint32_t)(USBx) + 0x400)))
-#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+6)*2+  ((uint32_t)(USBx) + 0x400)))
-
-#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
-    uint32_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum)); \
-    PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
-  }
-
-/**
-  * @brief  sets address of the tx/rx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wAddr: address to be set (must be word aligned).
-  * @retval None
-  */
-#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
-#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
-
-/**
-  * @brief  Gets address of the tx/rx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval address of the buffer.
-  */
-#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
-#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
-
-/**
-  * @brief  Sets counter of rx buffer with no. of blocks.
-  * @param  dwReg: Register
-  * @param  wCount: Counter.
-  * @param  wNBlocks: no. of Blocks.
-  * @retval None
-  */
-#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
-    (wNBlocks) = (wCount) >> 5;\
-    if(((wCount) & 0x1f) == 0)\
-    {                                                  \
-      (wNBlocks)--;\
-    }                                                  \
-    *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10) | 0x8000); \
-  }/* PCD_CALC_BLK32 */
-
-#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
-    (wNBlocks) = (wCount) >> 1;\
-    if(((wCount) & 0x1) != 0)\
-    {                                                  \
-      (wNBlocks)++;\
-    }                                                  \
-    *pdwReg = (uint16_t)((wNBlocks) << 10);\
-  }/* PCD_CALC_BLK2 */
-
-#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount)  {\
-    uint16_t wNBlocks;\
-    if((wCount) > 62)                                \
-    {                                                \
-      PCD_CALC_BLK32((dwReg),(wCount),wNBlocks);     \
-    }                                                \
-    else                                             \
-    {                                                \
-      PCD_CALC_BLK2((dwReg),(wCount),wNBlocks);      \
-    }                                                \
-  }/* PCD_SET_EP_CNT_RX_REG */
-
-#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
-    uint32_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
-    PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
-  }
-
-/**
-  * @brief  sets counter for the tx/rx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wCount: Counter value.
-  * @retval None
-  */
-#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
-
-
-/**
-  * @brief  gets counter of the tx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval Counter value
-  */
-#define PCD_GET_EP_TX_CNT(USBx, bEpNum)        ((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
-#define PCD_GET_EP_RX_CNT(USBx, bEpNum)        ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
-
-/**
-  * @brief  Sets buffer 0/1 address in a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wBuf0Addr: buffer 0 address.
-  * @retval Counter value
-  */
-#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
-#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
-
-/**
-  * @brief  Sets addresses in a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wBuf0Addr: buffer 0 address.
-  * @param  wBuf1Addr = buffer 1 address.
-  * @retval None
-  */
-#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
-    PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
-    PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
-  } /* PCD_SET_EP_DBUF_ADDR */
-
-/**
-  * @brief  Gets buffer 0/1 address of a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum)    (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
-#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum)    (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
-
-/**
-  * @brief  Gets buffer 0/1 address of a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  bDir: endpoint dir  EP_DBUF_OUT = OUT
-  *         EP_DBUF_IN  = IN
-  * @param  wCount: Counter value
-  * @retval None
-  */
-#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount)  { \
-    if((bDir) == PCD_EP_DBUF_OUT)\
-      /* OUT endpoint */ \
-    {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
-    else if((bDir) == PCD_EP_DBUF_IN)\
-      /* IN endpoint */ \
-      *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount);  \
-  } /* SetEPDblBuf0Count*/
-
-#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount)  { \
-    if((bDir) == PCD_EP_DBUF_OUT)\
-    {/* OUT endpoint */                                       \
-      PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount));           \
-    }                                                         \
-    else if((bDir) == PCD_EP_DBUF_IN)\
-    {/* IN endpoint */                                        \
-      *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
-    }                                                         \
-  } /* SetEPDblBuf1Count */
-
-#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
-    PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
-    PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
-  } /* PCD_SET_EP_DBUF_CNT  */
-
-/**
-  * @brief  Gets buffer 0/1 rx/tx counter for double buffering.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum)     (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
-#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum)     (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
-
-#endif /* USB */
-
-/** @defgroup PCD_Instance_definition PCD Instance definition
-  * @{
-  */
-#define IS_PCD_ALL_INSTANCE                                        IS_USB_ALL_INSTANCE
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* STM32F102x6 || STM32F102xB || */
-       /* STM32F103x6 || STM32F103xB || */
-       /* STM32F103xE || STM32F103xG || */
-       /* STM32F105xC || STM32F107xC    */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F1xx_HAL_PCD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/