diff options
Diffstat (limited to 'bsp/radio-controller-1/Src/usbd_conf.c')
| -rw-r--r-- | bsp/radio-controller-1/Src/usbd_conf.c | 754 |
1 files changed, 754 insertions, 0 deletions
diff --git a/bsp/radio-controller-1/Src/usbd_conf.c b/bsp/radio-controller-1/Src/usbd_conf.c new file mode 100644 index 0000000..858fb0c --- /dev/null +++ b/bsp/radio-controller-1/Src/usbd_conf.c @@ -0,0 +1,754 @@ +/** + ****************************************************************************** + * @file : usbd_conf.c + * @version : v2.0_Cube + * @brief : This file implements the board support package for the USB device library + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" +#include "usbd_def.h" +#include "usbd_core.h" +#include "usbd_cdc.h" +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +PCD_HandleTypeDef hpcd_USB_FS; +void Error_Handler(void); + +/* USER CODE BEGIN 0 */ +/* USER CODE END 0 */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* USER CODE BEGIN 1 */ +/* USER CODE END 1 */ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); + +/******************************************************************************* + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ +/* MSP Init */ + +void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspInit 0 */ + + /* USER CODE END USB_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USB_CLK_ENABLE(); + + /* Peripheral interrupt init */ + HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); + HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); + /* USER CODE BEGIN USB_MspInit 1 */ + + /* USER CODE END USB_MspInit 1 */ + } +} + +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspDeInit 0 */ + + /* USER CODE END USB_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_CLK_DISABLE(); + + /* Peripheral interrupt Deinit*/ + HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn); + + HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); + + /* USER CODE BEGIN USB_MspDeInit 1 */ + + /* USER CODE END USB_MspDeInit 1 */ + } +} + +/** + * @brief Setup Stage callback + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); +} + +/** + * @brief Data Out Stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); +} + +/** + * @brief Data In Stage callback.. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Reset callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_SpeedTypeDef speed = USBD_SPEED_FULL; + + /*Set USB Current Speed*/ + switch (hpcd->Init.speed) + { + case PCD_SPEED_FULL: + speed = USBD_SPEED_FULL; + break; + + default: + speed = USBD_SPEED_FULL; + break; + } + USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); + + /*Reset Device*/ + USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Suspend callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Inform USB library that core enters in suspend Mode */ + USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); + /*Enter in STOP mode */ + /* USER CODE BEGIN 2 */ + if (hpcd->Init.low_power_enable) + { + /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */ + SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); + } + /* USER CODE END 2 */ +} + +/** + * @brief Resume callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* USER CODE BEGIN 3 */ + /* USER CODE END 3 */ + USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); + +} + +/** + * @brief ISOOUTIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ISOINIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ConnectCallback callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Disconnect callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/******************************************************************************* + LL Driver Interface (USB Device Library --> PCD) +*******************************************************************************/ +/** + * @brief Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev) +{ + /* Init USB_IP */ + /* Link The driver to the stack */ + hpcd_USB_FS.pData = pdev; + pdev->pData = &hpcd_USB_FS; + + hpcd_USB_FS.Instance = USB; + hpcd_USB_FS.Init.dev_endpoints = 8; + hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8; + hpcd_USB_FS.Init.low_power_enable = DISABLE; + hpcd_USB_FS.Init.lpm_enable = DISABLE; + hpcd_USB_FS.Init.battery_charging_enable = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) + { + Error_Handler(); + } + + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); + return USBD_OK; +} + +/** + * @brief De-Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_DeInit(pdev->pData); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Starts the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_Start(pdev->pData); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Stops the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_Stop(pdev->pData); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Opens an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param ep_type: Endpoint Type + * @param ep_mps: Endpoint Max Packet Size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Open(pdev->pData, + ep_addr, + ep_mps, + ep_type); + + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Closes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Flushes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Sets a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Clears a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Returns Stall condition. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; + + if((ep_addr & 0x80) == 0x80) + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + } +} +/** + * @brief Assigns a USB address to the device. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Transmits data over an endpoint. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Prepares an endpoint for reception. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Returns the last transfered packet size. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); +} + +/** + * @brief Delays routine for the USB Device Library. + * @param Delay: Delay in ms + * @retval None + */ +void USBD_LL_Delay (uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/** + * @brief static single allocation. + * @param size: size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */ + return mem; +} + +/** + * @brief Dummy memory free + * @param *p pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ + +} + +/** +* @brief Software Device Connection +* @param hpcd: PCD handle +* @param state: connection state (0 : disconnected / 1: connected) +* @retval None +*/ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ +/* USER CODE BEGIN 5 */ + if (state == 1) + { + /* Configure Low Connection State */ + + } + else + { + /* Configure High Connection State */ + + } +/* USER CODE END 5 */ +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |