diff options
Diffstat (limited to 'stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c')
| -rw-r--r-- | stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c | 526 |
1 files changed, 526 insertions, 0 deletions
diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c new file mode 100644 index 0000000..0e0af69 --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c @@ -0,0 +1,526 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal.c + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief HAL module driver. + * This is the common part of the HAL initialization + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The common HAL driver contains a set of generic and common APIs that can be + used by the PPP peripheral drivers and the user to start using the HAL. + [..] + The HAL contains two APIs' categories: + (+) Common HAL APIs + (+) Services HAL APIs + + @endverbatim + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup HAL HAL + * @brief HAL module driver. + * @{ + */ + +#ifdef HAL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ + +/** @defgroup HAL_Private_Constants HAL Private Constants + * @{ + */ + +/** + * @brief STM32F1xx HAL Driver version number + */ +#define __STM32F1xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */ +#define __STM32F1xx_HAL_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ +#define __STM32F1xx_HAL_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */ +#define __STM32F1xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F1xx_HAL_VERSION ((__STM32F1xx_HAL_VERSION_MAIN << 24)\ + |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\ + |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\ + |(__STM32F1xx_HAL_VERSION_RC)) + +#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) + +/** + * @} + */ + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ + +/** @defgroup HAL_Private_Variables HAL Private Variables + * @{ + */ + +static __IO uint32_t uwTick; + +/** + * @} + */ + +/* Private function prototypes -----------------------------------------------*/ +/* Exported functions ---------------------------------------------------------*/ + +/** @defgroup HAL_Exported_Functions HAL Exported Functions + * @{ + */ + +/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions + * @brief Initialization and de-initialization functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Initializes the Flash interface, the NVIC allocation and initial clock + configuration. It initializes the source of time base also when timeout + is needed and the backup domain when enabled. + (+) de-Initializes common part of the HAL. + (+) Configure The time base source to have 1ms time base with a dedicated + Tick interrupt priority. + (++) Systick timer is used by default as source of time base, but user + can eventually implement his proper time base source (a general purpose + timer for example or other time source), keeping in mind that Time base + duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and + handled in milliseconds basis. + (++) Time base configuration function (HAL_InitTick ()) is called automatically + at the beginning of the program after reset by HAL_Init() or at any time + when clock is configured, by HAL_RCC_ClockConfig(). + (++) Source of time base is configured to generate interrupts at regular + time intervals. Care must be taken if HAL_Delay() is called from a + peripheral ISR process, the Tick interrupt line must have higher priority + (numerically lower) than the peripheral interrupt. Otherwise the caller + ISR process will be blocked. + (++) functions affecting time base configurations are declared as __Weak + to make override possible in case of other implementations in user file. + +@endverbatim + * @{ + */ + +/** + * @brief This function configures the Flash prefetch, + * Configures time base source, NVIC and Low level hardware + * @note This function is called at the beginning of program after reset and before + * the clock configuration + * @note The time base configuration is based on MSI clock when exiting from Reset. + * Once done, time base tick start incrementing. + * In the default implementation,Systick is used as source of time base. + * The tick variable is incremented each 1ms in its ISR. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_Init(void) +{ + /* Configure Flash prefetch */ +#if (PREFETCH_ENABLE != 0) +#if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \ + defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + + /* Prefetch buffer is not available on value line devices */ + __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); +#endif +#endif /* PREFETCH_ENABLE */ + + /* Set Interrupt Group Priority */ + HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); + + /* Use systick as time base source and configure 1ms tick (default clock after Reset is MSI) */ + HAL_InitTick(TICK_INT_PRIORITY); + + /* Init the low level hardware */ + HAL_MspInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief This function de-Initializes common part of the HAL and stops the source + * of time base. + * @note This function is optional. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_DeInit(void) +{ + /* Reset of all peripherals */ + __HAL_RCC_APB1_FORCE_RESET(); + __HAL_RCC_APB1_RELEASE_RESET(); + + __HAL_RCC_APB2_FORCE_RESET(); + __HAL_RCC_APB2_RELEASE_RESET(); + +#if defined(STM32F105xC) || defined(STM32F107xC) + __HAL_RCC_AHB_FORCE_RESET(); + __HAL_RCC_AHB_RELEASE_RESET(); +#endif + + /* De-Init the low level hardware */ + HAL_MspDeInit(); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the MSP. + * @retval None + */ +__weak void HAL_MspInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the MSP. + * @retval None + */ +__weak void HAL_MspDeInit(void) +{ + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_MspDeInit could be implemented in the user file + */ +} + +/** + * @brief This function configures the source of the time base. + * The time source is configured to have 1ms time base with a dedicated + * Tick interrupt priority. + * @note This function is called automatically at the beginning of program after + * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). + * @note In the default implementation, SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals. + * Care must be taken if HAL_Delay() is called from a peripheral ISR process, + * The the SysTick interrupt must have higher priority (numerically lower) + * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + * The function is declared as __Weak to be overwritten in case of other + * implementation in user file. + * @param TickPriority: Tick interrupt priority. + * @retval HAL status + */ +__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) +{ + /*Configure the SysTick to have interrupt in 1ms time basis*/ + HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000); + + /*Configure the SysTick IRQ priority */ + HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions + * @brief HAL Control functions + * +@verbatim + =============================================================================== + ##### HAL Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Provide a tick value in millisecond + (+) Provide a blocking delay in millisecond + (+) Suspend the time base source interrupt + (+) Resume the time base source interrupt + (+) Get the HAL API driver version + (+) Get the device identifier + (+) Get the device revision identifier + (+) Enable/Disable Debug module during Sleep mode + (+) Enable/Disable Debug module during STOP mode + (+) Enable/Disable Debug module during STANDBY mode + +@endverbatim + * @{ + */ + +/** + * @brief This function is called to increment a global variable "uwTick" + * used as application time base. + * @note In the default implementation, this variable is incremented each 1ms + * in Systick ISR. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_IncTick(void) +{ + uwTick++; +} + +/** + * @brief Provides a tick value in millisecond. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval tick value + */ +__weak uint32_t HAL_GetTick(void) +{ + return uwTick; +} + +/** + * @brief This function provides accurate delay (in milliseconds) based + * on variable incremented. + * @note In the default implementation , SysTick timer is the source of time base. + * It is used to generate interrupts at regular time intervals where uwTick + * is incremented. + * @note ThiS function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @param Delay: specifies the delay time length, in milliseconds. + * @retval None + */ +__weak void HAL_Delay(__IO uint32_t Delay) +{ + uint32_t tickstart = 0; + tickstart = HAL_GetTick(); + while((HAL_GetTick() - tickstart) < Delay) + { + } +} + +/** + * @brief Suspend Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() + * is called, the the SysTick interrupt will be disabled and so Tick increment + * is suspended. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_SuspendTick(void) +{ + /* Disable SysTick Interrupt */ + CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief Resume Tick increment. + * @note In the default implementation , SysTick timer is the source of time base. It is + * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() + * is called, the the SysTick interrupt will be enabled and so Tick increment + * is resumed. + * @note This function is declared as __weak to be overwritten in case of other + * implementations in user file. + * @retval None + */ +__weak void HAL_ResumeTick(void) +{ + /* Enable SysTick Interrupt */ + SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); +} + +/** + * @brief This method returns the HAL revision + * @retval version: 0xXYZR (8bits for each decimal, R for RC) + */ +uint32_t HAL_GetHalVersion(void) +{ + return __STM32F1xx_HAL_VERSION; +} + +/** + * @brief Returns the device revision identifier. + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval Device revision identifier + */ +uint32_t HAL_GetREVID(void) +{ + return((DBGMCU->IDCODE) >> POSITION_VAL(DBGMCU_IDCODE_REV_ID)); +} + +/** + * @brief Returns the device identifier. + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval Device identifier + */ +uint32_t HAL_GetDEVID(void) +{ + return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); +} + +/** + * @brief Enable the Debug Module during SLEEP mode + * @retval None + */ +void HAL_DBGMCU_EnableDBGSleepMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Disable the Debug Module during SLEEP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_DisableDBGSleepMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); +} + +/** + * @brief Enable the Debug Module during STOP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * Note: On all STM32F1 devices: + * If the system tick timer interrupt is enabled during the Stop mode + * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup + * the system from Stop mode. + * Workaround: To debug the Stop mode, disable the system tick timer + * interrupt. + * Refer to errata sheet of these devices for more details. + * Note: On all STM32F1 devices: + * If the system tick timer interrupt is enabled during the Stop mode + * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup + * the system from Stop mode. + * Workaround: To debug the Stop mode, disable the system tick timer + * interrupt. + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStopMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Disable the Debug Module during STOP mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStopMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); +} + +/** + * @brief Enable the Debug Module during STANDBY mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_EnableDBGStandbyMode(void) +{ + SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @brief Disable the Debug Module during STANDBY mode + * Note: On devices STM32F10xx8 and STM32F10xxB, + * STM32F101xC/D/E and STM32F103xC/D/E, + * STM32F101xF/G and STM32F103xF/G + * STM32F10xx4 and STM32F10xx6 + * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in + * debug mode (not accessible by the user software in normal mode). + * Refer to errata sheet of these devices for more details. + * @retval None + */ +void HAL_DBGMCU_DisableDBGStandbyMode(void) +{ + CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |