diff options
Diffstat (limited to 'stm32cubemx/Src/usbd_conf.c')
| -rw-r--r-- | stm32cubemx/Src/usbd_conf.c | 754 |
1 files changed, 0 insertions, 754 deletions
diff --git a/stm32cubemx/Src/usbd_conf.c b/stm32cubemx/Src/usbd_conf.c deleted file mode 100644 index 858fb0c..0000000 --- a/stm32cubemx/Src/usbd_conf.c +++ /dev/null @@ -1,754 +0,0 @@ -/** - ****************************************************************************** - * @file : usbd_conf.c - * @version : v2.0_Cube - * @brief : This file implements the board support package for the USB device library - ****************************************************************************** - * - * Copyright (c) 2017 STMicroelectronics International N.V. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** -*/ -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx.h" -#include "stm32f1xx_hal.h" -#include "usbd_def.h" -#include "usbd_core.h" -#include "usbd_cdc.h" -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -PCD_HandleTypeDef hpcd_USB_FS; -void Error_Handler(void); - -/* USER CODE BEGIN 0 */ -/* USER CODE END 0 */ - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* USER CODE BEGIN 1 */ -/* USER CODE END 1 */ -void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); - -/******************************************************************************* - LL Driver Callbacks (PCD -> USB Device Library) -*******************************************************************************/ -/* MSP Init */ - -void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) -{ - if(pcdHandle->Instance==USB) - { - /* USER CODE BEGIN USB_MspInit 0 */ - - /* USER CODE END USB_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_USB_CLK_ENABLE(); - - /* Peripheral interrupt init */ - HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); - HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0); - HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); - /* USER CODE BEGIN USB_MspInit 1 */ - - /* USER CODE END USB_MspInit 1 */ - } -} - -void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) -{ - if(pcdHandle->Instance==USB) - { - /* USER CODE BEGIN USB_MspDeInit 0 */ - - /* USER CODE END USB_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USB_CLK_DISABLE(); - - /* Peripheral interrupt Deinit*/ - HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn); - - HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); - - /* USER CODE BEGIN USB_MspDeInit 1 */ - - /* USER CODE END USB_MspDeInit 1 */ - } -} - -/** - * @brief Setup Stage callback - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); -} - -/** - * @brief Data Out Stage callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); -} - -/** - * @brief Data In Stage callback.. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); -} - -/** - * @brief SOF callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief Reset callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_SpeedTypeDef speed = USBD_SPEED_FULL; - - /*Set USB Current Speed*/ - switch (hpcd->Init.speed) - { - case PCD_SPEED_FULL: - speed = USBD_SPEED_FULL; - break; - - default: - speed = USBD_SPEED_FULL; - break; - } - USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); - - /*Reset Device*/ - USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief Suspend callback. - * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ - /* Inform USB library that core enters in suspend Mode */ - USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); - /*Enter in STOP mode */ - /* USER CODE BEGIN 2 */ - if (hpcd->Init.low_power_enable) - { - /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */ - SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); - } - /* USER CODE END 2 */ -} - -/** - * @brief Resume callback. - * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ - /* USER CODE BEGIN 3 */ - /* USER CODE END 3 */ - USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); - -} - -/** - * @brief ISOOUTIncomplete callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); -} - -/** - * @brief ISOINIncomplete callback. - * @param hpcd: PCD handle - * @param epnum: Endpoint Number - * @retval None - */ -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); -} - -/** - * @brief ConnectCallback callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); -} - -/** - * @brief Disconnect callback. - * @param hpcd: PCD handle - * @retval None - */ -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); -} - -/******************************************************************************* - LL Driver Interface (USB Device Library --> PCD) -*******************************************************************************/ -/** - * @brief Initializes the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev) -{ - /* Init USB_IP */ - /* Link The driver to the stack */ - hpcd_USB_FS.pData = pdev; - pdev->pData = &hpcd_USB_FS; - - hpcd_USB_FS.Instance = USB; - hpcd_USB_FS.Init.dev_endpoints = 8; - hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; - hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8; - hpcd_USB_FS.Init.low_power_enable = DISABLE; - hpcd_USB_FS.Init.lpm_enable = DISABLE; - hpcd_USB_FS.Init.battery_charging_enable = DISABLE; - if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) - { - Error_Handler(); - } - - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); - HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); - return USBD_OK; -} - -/** - * @brief De-Initializes the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_DeInit(pdev->pData); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Starts the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_Start(pdev->pData); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Stops the Low Level portion of the Device driver. - * @param pdev: Device handle - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_Stop(pdev->pData); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Opens an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @param ep_type: Endpoint Type - * @param ep_mps: Endpoint Max Packet Size - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, - uint8_t ep_addr, - uint8_t ep_type, - uint16_t ep_mps) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Open(pdev->pData, - ep_addr, - ep_mps, - ep_type); - - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Closes an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Flushes an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Sets a Stall condition on an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Clears a Stall condition on an endpoint of the Low Level Driver. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Returns Stall condition. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval Stall (1: Yes, 0: No) - */ -uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; - - if((ep_addr & 0x80) == 0x80) - { - return hpcd->IN_ep[ep_addr & 0x7F].is_stall; - } - else - { - return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; - } -} -/** - * @brief Assigns a USB address to the device. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Transmits data over an endpoint. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @param pbuf: Pointer to data to be sent - * @param size: Data size - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint16_t size) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Prepares an endpoint for reception. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @param pbuf: Pointer to data to be received - * @param size: Data size - * @retval USBD Status - */ -USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, - uint8_t ep_addr, - uint8_t *pbuf, - uint16_t size) -{ - HAL_StatusTypeDef hal_status = HAL_OK; - USBD_StatusTypeDef usb_status = USBD_OK; - - hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); - - switch (hal_status) { - case HAL_OK : - usb_status = USBD_OK; - break; - case HAL_ERROR : - usb_status = USBD_FAIL; - break; - case HAL_BUSY : - usb_status = USBD_BUSY; - break; - case HAL_TIMEOUT : - usb_status = USBD_FAIL; - break; - default : - usb_status = USBD_FAIL; - break; - } - return usb_status; -} - -/** - * @brief Returns the last transfered packet size. - * @param pdev: Device handle - * @param ep_addr: Endpoint Number - * @retval Recived Data Size - */ -uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr) -{ - return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); -} - -/** - * @brief Delays routine for the USB Device Library. - * @param Delay: Delay in ms - * @retval None - */ -void USBD_LL_Delay (uint32_t Delay) -{ - HAL_Delay(Delay); -} - -/** - * @brief static single allocation. - * @param size: size of allocated memory - * @retval None - */ -void *USBD_static_malloc(uint32_t size) -{ - static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */ - return mem; -} - -/** - * @brief Dummy memory free - * @param *p pointer to allocated memory address - * @retval None - */ -void USBD_static_free(void *p) -{ - -} - -/** -* @brief Software Device Connection -* @param hpcd: PCD handle -* @param state: connection state (0 : disconnected / 1: connected) -* @retval None -*/ -void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) -{ -/* USER CODE BEGIN 5 */ - if (state == 1) - { - /* Configure Low Connection State */ - - } - else - { - /* Configure High Connection State */ - - } -/* USER CODE END 5 */ -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |