o Renaming arduino to assignments.

7 files changed, 0 insertions, 63 deletions

diff --git a/arduino/01-blink-a-led/Makefile b/arduino/01-blink-a-led/Makefile
deleted file mode 100644
index b015ec1..0000000
--- a/arduino/01-blink-a-led/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-DIR=01-blink-a-led
-A=blink-a-led
-
-include $(BASEDIR)/Makefile.assignment
diff --git a/arduino/01-blink-a-led/blink-a-led.md b/arduino/01-blink-a-led/blink-a-led.md
deleted file mode 100644
index f4b3fa1..0000000
--- a/arduino/01-blink-a-led/blink-a-led.md
+++ /dev/null
@@ -1,39 +0,0 @@
-# Assignment: Blink a led
-
-
-## Goal
-
-Check that your local environment is working properly.
-
-## Step 1
-
-Create this schematic:
-
-![](schematic/assignment-1_schem.pdf)
-
-![](schematic/assignment-1_bb.pdf)
-
-The colors on the wires used does not matter. The resistors
-orientation is not important, but the LED's orientation is important.
-
-## Step 2
-
-Implement `setup()` and `loop()`. In `setup()` configure the LED pin and blink the LED in `loop()`.
-
-Use these functions:
-
-~~~ .c++
-
-Serial.begin(115200);
-Serial.println(string);
-
-pinMode(pin, mode);
-digitalWrite(pin, state); // HIGH or LOW
-delay();
-
-~~~
-
-## Tips
-
-* It is useful to print a startup message just to see when the
-  application has started.
diff --git a/arduino/01-blink-a-led/blink-a-led.pdf b/arduino/01-blink-a-led/blink-a-led.pdf
deleted file mode 100644
index de719fd..0000000
--- a/arduino/01-blink-a-led/blink-a-led.pdf
+++ /dev/null
diff --git a/arduino/01-blink-a-led/schematic/assignment-1.fzz b/arduino/01-blink-a-led/schematic/assignment-1.fzz
deleted file mode 100644
index da3ad5b..0000000
--- a/arduino/01-blink-a-led/schematic/assignment-1.fzz
+++ /dev/null
diff --git a/arduino/01-blink-a-led/schematic/assignment-1_bb.pdf b/arduino/01-blink-a-led/schematic/assignment-1_bb.pdf
deleted file mode 100644
index 0995ece..0000000
--- a/arduino/01-blink-a-led/schematic/assignment-1_bb.pdf
+++ /dev/null
diff --git a/arduino/01-blink-a-led/schematic/assignment-1_schem.pdf b/arduino/01-blink-a-led/schematic/assignment-1_schem.pdf
deleted file mode 100644
index a5241b2..0000000
--- a/arduino/01-blink-a-led/schematic/assignment-1_schem.pdf
+++ /dev/null
diff --git a/arduino/01-blink-a-led/solution/assignment-1/assignment-1.ino b/arduino/01-blink-a-led/solution/assignment-1/assignment-1.ino
deleted file mode 100644
index 5b72892..0000000
--- a/arduino/01-blink-a-led/solution/assignment-1/assignment-1.ino
+++ /dev/null
@@ -1,20 +0,0 @@
-const int LED_PIN = D0;
-
-void setup() {
-  Serial.begin(115200);
-  Serial.println();
-  Serial.println();
-  Serial.println("Hello world!");
-  pinMode(LED_PIN, OUTPUT);
-}
-
-void loop() {
-  digitalWrite(LED_PIN, HIGH);
-  Serial.println("HIGH");
-  delay(1000);
-
-  digitalWrite(LED_PIN, LOW);
-  Serial.println("LOW");
-  delay(1000);
-}
-