diff options
author | Trygve Laugstøl <trygvis@inamo.no> | 2018-08-23 17:08:59 +0200 |
---|---|---|
committer | Trygve Laugstøl <trygvis@inamo.no> | 2018-08-23 17:12:21 +0200 |
commit | 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a (patch) | |
tree | ab49cc16ed0b853452c5c2ed2d3042416d628986 /thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_gls/main.c | |
download | iot-sensors-master.tar.gz iot-sensors-master.tar.bz2 iot-sensors-master.tar.xz iot-sensors-master.zip |
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_gls/main.c')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_gls/main.c | 1033 |
1 files changed, 1033 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_gls/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_gls/main.c new file mode 100644 index 0000000..ddf70b3 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_gls/main.c @@ -0,0 +1,1033 @@ +/** + * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/** @file + * + * @defgroup ble_sdk_app_gls_main main.c + * @{ + * @ingroup ble_sdk_app_gls + * @brief Glucose Meter service Sample Application + * + * This file contains the source code for a sample application using the Glucose Meter service + * (and also Battery and Device Information services). This application uses the + * @ref srvlib_conn_params module. + */ + +#include <stdint.h> +#include <string.h> +#include "nordic_common.h" +#include "nrf.h" +#include "app_error.h" +#include "ble.h" +#include "ble_err.h" +#include "ble_hci.h" +#include "ble_srv_common.h" +#include "ble_advdata.h" +#include "ble_advertising.h" +#include "ble_dis.h" +#include "ble_bas.h" +#include "ble_gls.h" +#include "ble_racp.h" +#include "ble_conn_params.h" +#include "sensorsim.h" +#include "nrf_sdh.h" +#include "nrf_sdh_soc.h" +#include "nrf_sdh_ble.h" +#include "app_timer.h" +#include "peer_manager.h" +#include "bsp_btn_ble.h" +#include "fds.h" +#include "ble_conn_state.h" +#include "nrf_ble_gatt.h" +#include "nrf_ble_qwr.h" +#include "nrf_pwr_mgmt.h" + +#include "nrf_log.h" +#include "nrf_log_ctrl.h" +#include "nrf_log_default_backends.h" + + +#define DEVICE_NAME "Nordic_Glucose" /**< Name of device. Will be included in the advertising data. */ +#define MANUFACTURER_NAME "NordicSemiconductor" /**< Manufacturer. Will be passed to Device Information Service. */ +#define MODEL_NUMBER "nRF51" /**< Model Number string. Will be passed to Device Information Service. */ +#define MANUFACTURER_ID 0x55AA55AA55 /**< DUMMY Manufacturer ID. Will be passed to Device Information Service. You shall use the ID for your Company*/ +#define ORG_UNIQUE_ID 0xEEBBEE /**< DUMMY Organisation Unique ID. Will be passed to Device Information Service. You shall use the Organisation Unique ID relevant for your Company */ + +#define APP_BLE_OBSERVER_PRIO 3 /**< Application's BLE observer priority. You shouldn't need to modify this value. */ +#define APP_BLE_CONN_CFG_TAG 1 /**< A tag identifying the SoftDevice BLE configuration. */ + +#define APP_ADV_INTERVAL 40 /**< The advertising interval (in units of 0.625 ms. This value corresponds to 25 ms). */ +#define APP_ADV_DURATION 18000 /**< The advertising duration (180 seconds) in units of 10 milliseconds. */ +#define SECURITY_REQUEST_DELAY APP_TIMER_TICKS(400) /**< Delay after connection until Security Request is sent, if necessary (ticks). */ + +#define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(10000) /**< Battery level measurement interval (ticks). */ +#define MIN_BATTERY_LEVEL 81 /**< Minimum battery level as returned by the simulated measurement function. */ +#define MAX_BATTERY_LEVEL 100 /**< Maximum battery level as returned by the simulated measurement function. */ +#define BATTERY_LEVEL_INCREMENT 1 /**< Value by which the battery level is incremented/decremented for each call to the simulated measurement function. */ + +#define MIN_CONN_INTERVAL MSEC_TO_UNITS(10, UNIT_1_25_MS) /**< Minimum acceptable connection interval (10 ms). */ +#define MAX_CONN_INTERVAL MSEC_TO_UNITS(100, UNIT_1_25_MS) /**< Maximum acceptable connection interval (100 ms) */ +#define SLAVE_LATENCY 0 /**< Slave latency. */ +#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) /**< Connection supervisory timeout (4 seconds). */ +#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */ +#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */ +#define MAX_CONN_PARAM_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */ + +#define SEC_PARAM_BOND 1 /**< Perform bonding. */ +#define SEC_PARAM_MITM 1 /**< Man In The Middle protection required (applicable when display module is detected). */ +#define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */ +#define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */ +#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_DISPLAY_ONLY /**< Display I/O capabilities. */ +#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ +#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ +#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */ + +#define PASSKEY_TXT "Passkey:" /**< Message to be displayed together with the pass-key. */ +#define PASSKEY_TXT_LENGTH 8 /**< Length of message to be displayed together with the pass-key. */ +#define PASSKEY_LENGTH 6 /**< Length of pass-key received by the stack for display. */ + +#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */ + + +BLE_BAS_DEF(m_bas); /**< Structure used to identify the battery service. */ +BLE_GLS_DEF(m_gls); /**< Structure used to identify the glucose service. */ +NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */ +NRF_BLE_QWR_DEF(m_qwr); /**< Context for the Queued Write module.*/ +BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */ +APP_TIMER_DEF(m_battery_timer_id); /**< Battery timer. */ +APP_TIMER_DEF(m_sec_req_timer_id); /**< Security Request timer. */ + +static pm_peer_id_t m_peer_to_be_deleted = PM_PEER_ID_INVALID; +static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */ +static ble_uuid_t m_adv_uuids[] = /**< Universally unique service identifiers. */ +{ + {BLE_UUID_GLUCOSE_SERVICE, BLE_UUID_TYPE_BLE}, + {BLE_UUID_BATTERY_SERVICE, BLE_UUID_TYPE_BLE}, + {BLE_UUID_DEVICE_INFORMATION_SERVICE, BLE_UUID_TYPE_BLE} +}; +static sensorsim_cfg_t m_battery_sim_cfg; /**< Battery Level sensor simulator configuration. */ +static sensorsim_state_t m_battery_sim_state; /**< Battery Level sensor simulator state. */ + + +static void advertising_start(bool erase_bonds); + + +/**@brief Callback function for asserts in the SoftDevice. + * + * @details This function will be called in case of an assert in the SoftDevice. + * + * @warning This handler is an example only and does not fit a final product. You need to analyze + * how your product is supposed to react in case of Assert. + * @warning On assert from the SoftDevice, the system can only recover on reset. + * + * @param[in] line_num Line number of the failing ASSERT call. + * @param[in] file_name File name of the failing ASSERT call. + */ +void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name) +{ + app_error_handler(DEAD_BEEF, line_num, p_file_name); +} + +/**@brief Function for handling Peer Manager events. + * + * @param[in] p_evt Peer Manager event. + */ +static void pm_evt_handler(pm_evt_t const * p_evt) +{ + ret_code_t err_code; + + switch (p_evt->evt_id) + { + case PM_EVT_BONDED_PEER_CONNECTED: + { + NRF_LOG_INFO("Connected to a previously bonded device."); + // Start Security Request timer. + err_code = app_timer_start(m_sec_req_timer_id, SECURITY_REQUEST_DELAY, NULL); + APP_ERROR_CHECK(err_code); + } break; + + case PM_EVT_CONN_SEC_SUCCEEDED: + { + pm_conn_sec_status_t conn_sec_status; + + // Check if the link is authenticated (meaning at least MITM). + err_code = pm_conn_sec_status_get(p_evt->conn_handle, &conn_sec_status); + APP_ERROR_CHECK(err_code); + + if (conn_sec_status.mitm_protected) + { + NRF_LOG_INFO("Link secured. Role: %d. conn_handle: %d, Procedure: %d", + ble_conn_state_role(p_evt->conn_handle), + p_evt->conn_handle, + p_evt->params.conn_sec_succeeded.procedure); + } + else + { + // The peer did not use MITM, disconnect. + NRF_LOG_INFO("Collector did not use MITM, disconnecting"); + err_code = pm_peer_id_get(m_conn_handle, &m_peer_to_be_deleted); + APP_ERROR_CHECK(err_code); + err_code = sd_ble_gap_disconnect(m_conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + APP_ERROR_CHECK(err_code); + } + } break; + + case PM_EVT_CONN_SEC_FAILED: + { + NRF_LOG_INFO("Failed to secure connection. Disconnecting."); + err_code = sd_ble_gap_disconnect(m_conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + if (err_code != NRF_ERROR_INVALID_STATE) + { + APP_ERROR_CHECK(err_code); + } + m_conn_handle = BLE_CONN_HANDLE_INVALID; + } break; + + case PM_EVT_CONN_SEC_CONFIG_REQ: + { + // Reject pairing request from an already bonded peer. + pm_conn_sec_config_t conn_sec_config = {.allow_repairing = false}; + pm_conn_sec_config_reply(p_evt->conn_handle, &conn_sec_config); + } break; + + case PM_EVT_STORAGE_FULL: + { + // Run garbage collection on the flash. + err_code = fds_gc(); + if (err_code == FDS_ERR_NO_SPACE_IN_QUEUES) + { + // Retry. + } + else + { + APP_ERROR_CHECK(err_code); + } + } break; + + case PM_EVT_PEERS_DELETE_SUCCEEDED: + { + advertising_start(false); + } break; + + case PM_EVT_PEER_DATA_UPDATE_FAILED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.peer_data_update_failed.error); + } break; + + case PM_EVT_PEER_DELETE_FAILED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.peer_delete_failed.error); + } break; + + case PM_EVT_PEERS_DELETE_FAILED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.peers_delete_failed_evt.error); + } break; + + case PM_EVT_ERROR_UNEXPECTED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.error_unexpected.error); + } break; + + case PM_EVT_CONN_SEC_START: + case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED: + case PM_EVT_PEER_DELETE_SUCCEEDED: + case PM_EVT_LOCAL_DB_CACHE_APPLIED: + case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED: + // This can happen when the local DB has changed. + case PM_EVT_SERVICE_CHANGED_IND_SENT: + case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED: + default: + break; + } +} + + +/**@brief Function for handling Service errors. + * + * @details A pointer to this function will be passed to each service which may need to inform the + * application about an error. + * + * @param[in] nrf_error Error code containing information about what went wrong. + */ +static void service_error_handler(uint32_t nrf_error) +{ + APP_ERROR_HANDLER(nrf_error); +} + + +/**@brief Function for performing battery measurement and updating the Battery Level characteristic + * in Battery Service. + */ +static void battery_level_update(void) +{ + ret_code_t err_code; + uint8_t battery_level; + + battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg); + + err_code = ble_bas_battery_level_update(&m_bas, battery_level, BLE_CONN_HANDLE_ALL); + if ((err_code != NRF_SUCCESS) && + (err_code != NRF_ERROR_INVALID_STATE) && + (err_code != NRF_ERROR_RESOURCES) && + (err_code != NRF_ERROR_BUSY) && + (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) + ) + { + APP_ERROR_HANDLER(err_code); + } +} + + +/**@brief Function for handling the Battery measurement timer timeout. + * + * @details This function will be called each time the battery level measurement timer expires. + * + * @param[in] p_context Pointer used for passing some arbitrary information (context) from the + * app_start_timer() call to the timeout handler. + */ +static void battery_level_meas_timeout_handler(void * p_context) +{ + UNUSED_PARAMETER(p_context); + battery_level_update(); +} + + +/**@brief Function for handling the Security Request timer timeout. + * + * @details This function will be called each time the Security Request timer expires. + * + * @param[in] p_context Pointer used for passing some arbitrary information (context) from the + * app_start_timer() call to the timeout handler. + */ +static void sec_req_timeout_handler(void * p_context) +{ + ret_code_t err_code; + + if (m_conn_handle != BLE_CONN_HANDLE_INVALID) + { + // Initiate bonding. + NRF_LOG_DEBUG("Start encryption"); + err_code = pm_conn_secure(m_conn_handle, false); + if (err_code != NRF_ERROR_INVALID_STATE) + { + APP_ERROR_CHECK(err_code); + } + } +} + + +/**@brief Function for updating glucose measurement and updating glucose characteristic in Glucose. + Service. + */ +static void read_glucose_measurement(void) +{ + ble_gls_rec_t rec; + uint32_t err_code; + + static int16_t s_mantissa = 550; + static int16_t s_exponent = -3; + static uint8_t s_secs = 5; + + // simulate the reading of a glucose measurement. + rec.meas.flags = BLE_GLS_MEAS_FLAG_TIME_OFFSET | + BLE_GLS_MEAS_FLAG_CONC_TYPE_LOC | + BLE_GLS_MEAS_FLAG_UNITS_MOL_L; + rec.meas.base_time.year = 2012; + rec.meas.base_time.month = 1; + rec.meas.base_time.day = 1; + rec.meas.base_time.hours = 12; + rec.meas.base_time.minutes = 30; + rec.meas.base_time.seconds = s_secs; + rec.meas.glucose_concentration.exponent = s_exponent; + rec.meas.glucose_concentration.mantissa = s_mantissa; + rec.meas.time_offset = 0; + rec.meas.type = BLE_GLS_MEAS_TYPE_CAP_BLOOD; + rec.meas.sample_location = BLE_GLS_MEAS_LOC_FINGER; + rec.meas.sensor_status_annunciation = 0; + + // change values for next read. + s_mantissa += 23; + if (s_mantissa > 939) + { + s_mantissa -= 434; + } + + s_secs += 3; + if (s_secs > 59) + { + s_secs = 0; + } + + err_code = ble_gls_glucose_new_meas(&m_gls, &rec); + if (err_code != NRF_SUCCESS) + { + // Do nothing. + } +} + + +/**@brief Function for the Timer initialization. + * + * @details Initializes the timer module. This creates and starts application timers. + */ +static void timers_init(void) +{ + ret_code_t err_code; + + // Initialize timer module. + err_code = app_timer_init(); + APP_ERROR_CHECK(err_code); + + // Create timers. + err_code = app_timer_create(&m_battery_timer_id, + APP_TIMER_MODE_REPEATED, + battery_level_meas_timeout_handler); + APP_ERROR_CHECK(err_code); + + // Create Security Request timer. + err_code = app_timer_create(&m_sec_req_timer_id, + APP_TIMER_MODE_SINGLE_SHOT, + sec_req_timeout_handler); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for the GAP initialization. + * + * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the + * device including the device name, appearance, and the preferred connection parameters. + */ +static void gap_params_init(void) +{ + ret_code_t err_code; + ble_gap_conn_params_t gap_conn_params; + ble_gap_conn_sec_mode_t sec_mode; + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); + + err_code = sd_ble_gap_device_name_set(&sec_mode, + (const uint8_t *)DEVICE_NAME, + strlen(DEVICE_NAME)); + APP_ERROR_CHECK(err_code); + + err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_GLUCOSE_METER); + APP_ERROR_CHECK(err_code); + + memset(&gap_conn_params, 0, sizeof(gap_conn_params)); + + gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL; + gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL; + gap_conn_params.slave_latency = SLAVE_LATENCY; + gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT; + + err_code = sd_ble_gap_ppcp_set(&gap_conn_params); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for initializing the GATT module. + */ +static void gatt_init(void) +{ + ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling Queued Write Module errors. + * + * @details A pointer to this function will be passed to each service which may need to inform the + * application about an error. + * + * @param[in] nrf_error Error code containing information about what went wrong. + */ +static void nrf_qwr_error_handler(uint32_t nrf_error) +{ + APP_ERROR_HANDLER(nrf_error); +} + + +/**@brief Function for initializing services that will be used by the application. + * + * @details Initialize the Glucose, Battery and Device Information services. + */ +static void services_init(void) +{ + ret_code_t err_code; + ble_gls_init_t gls_init; + ble_dis_init_t dis_init; + ble_bas_init_t bas_init; + nrf_ble_qwr_init_t qwr_init = {0}; + + // Initialize Queued Write Module. + qwr_init.error_handler = nrf_qwr_error_handler; + + err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init); + APP_ERROR_CHECK(err_code); + + // Initialize Glucose Service - sample selection of feature bits. + memset(&gls_init, 0, sizeof(gls_init)); + + gls_init.evt_handler = NULL; + gls_init.error_handler = service_error_handler; + gls_init.feature = 0; + gls_init.feature |= BLE_GLS_FEATURE_LOW_BATT; + gls_init.feature |= BLE_GLS_FEATURE_TEMP_HIGH_LOW; + gls_init.feature |= BLE_GLS_FEATURE_GENERAL_FAULT; + gls_init.is_context_supported = false; + + err_code = ble_gls_init(&m_gls, &gls_init); + APP_ERROR_CHECK(err_code); + + // Initialize Battery Service. + memset(&bas_init, 0, sizeof(bas_init)); + + // Here the sec level for the Battery Service can be changed/increased. + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm); + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm); + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm); + + bas_init.evt_handler = NULL; + bas_init.support_notification = true; + bas_init.p_report_ref = NULL; + bas_init.initial_batt_level = 100; + + err_code = ble_bas_init(&m_bas, &bas_init); + APP_ERROR_CHECK(err_code); + + // Initialize Device Information Service. + memset(&dis_init, 0, sizeof(dis_init)); + + ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, MANUFACTURER_NAME); + + ble_srv_ascii_to_utf8(&dis_init.serial_num_str, MODEL_NUMBER); + + ble_dis_sys_id_t system_id; + system_id.manufacturer_id = MANUFACTURER_ID; + system_id.organizationally_unique_id = ORG_UNIQUE_ID; + dis_init.p_sys_id = &system_id; + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm); + + err_code = ble_dis_init(&dis_init); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for initializing the sensor simulators. + */ +static void sensor_simulator_init(void) +{ + m_battery_sim_cfg.min = MIN_BATTERY_LEVEL; + m_battery_sim_cfg.max = MAX_BATTERY_LEVEL; + m_battery_sim_cfg.incr = BATTERY_LEVEL_INCREMENT; + m_battery_sim_cfg.start_at_max = true; + + sensorsim_init(&m_battery_sim_state, &m_battery_sim_cfg); +} + + +/**@brief Function for starting application timers. + */ +static void application_timers_start(void) +{ + ret_code_t err_code; + + // Start application timers. + err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling the Connection Parameter events. + * + * @details This function will be called for all events in the Connection Parameters Module which + * are passed to the application. + * @note All this function does is to disconnect. This could have been done by simply + * setting the disconnect_on_fail configuration parameter, but instead we use the + * event handler mechanism to demonstrate its use. + * + * @param[in] p_evt Event received from the Connection Parameters Module. + */ +static void on_conn_params_evt(ble_conn_params_evt_t * p_evt) +{ + ret_code_t err_code; + + if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED) + { + err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE); + APP_ERROR_CHECK(err_code); + } +} + + +/**@brief Function for handling a Connection Parameters error. + * + * @param[in] nrf_error Error code containing information about what went wrong. + */ +static void conn_params_error_handler(uint32_t nrf_error) +{ + APP_ERROR_HANDLER(nrf_error); +} + + +/**@brief Function for initializing the Connection Parameters module. + */ +static void conn_params_init(void) +{ + ret_code_t err_code; + ble_conn_params_init_t cp_init; + + memset(&cp_init, 0, sizeof(cp_init)); + + cp_init.p_conn_params = NULL; + cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY; + cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY; + cp_init.max_conn_params_update_count = MAX_CONN_PARAM_UPDATE_COUNT; + cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID; + cp_init.disconnect_on_fail = false; + cp_init.evt_handler = on_conn_params_evt; + cp_init.error_handler = conn_params_error_handler; + + err_code = ble_conn_params_init(&cp_init); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for putting the chip into sleep mode. + * + * @note This function will not return. + */ +static void sleep_mode_enter(void) +{ + ret_code_t err_code;; + err_code = bsp_indication_set(BSP_INDICATE_IDLE); + APP_ERROR_CHECK(err_code); + + // Prepare wakeup buttons. + err_code = bsp_btn_ble_sleep_mode_prepare(); + APP_ERROR_CHECK(err_code); + + // Go to system-off mode (this function will not return; wakeup will cause a reset). + err_code = sd_power_system_off(); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling advertising events. + * + * @param[in] ble_adv_evt Advertising event. + */ +static void on_adv_evt(ble_adv_evt_t ble_adv_evt) +{ + ret_code_t err_code; + + switch (ble_adv_evt) + { + case BLE_ADV_EVT_FAST: + NRF_LOG_INFO("Fast advertising"); + err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING); + APP_ERROR_CHECK(err_code); + break; // BLE_ADV_EVT_FAST + + case BLE_ADV_EVT_IDLE: + sleep_mode_enter(); + break; // BLE_ADV_EVT_IDLE + + default: + break; + } +} + + +/**@brief Function for handling BLE events. + * + * @param[in] p_ble_evt Bluetooth stack event. + * @param[in] p_context Unused. + */ +static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context) +{ + ret_code_t err_code; + + switch (p_ble_evt->header.evt_id) + { + case BLE_GAP_EVT_DISCONNECTED: + { + NRF_LOG_INFO("Disconnected"); + m_conn_handle = BLE_CONN_HANDLE_INVALID; + // Check if the last connected peer had not used MITM, if so, delete its bond information. + if (m_peer_to_be_deleted != PM_PEER_ID_INVALID) + { + err_code = pm_peer_delete(m_peer_to_be_deleted); + APP_ERROR_CHECK(err_code); + NRF_LOG_DEBUG("Collector's bond deleted"); + m_peer_to_be_deleted = PM_PEER_ID_INVALID; + } + } break; + + case BLE_GAP_EVT_CONNECTED: + { + NRF_LOG_INFO("Connected"); + m_peer_to_be_deleted = PM_PEER_ID_INVALID; + err_code = bsp_indication_set(BSP_INDICATE_CONNECTED); + APP_ERROR_CHECK(err_code); + m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle; + err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle); + APP_ERROR_CHECK(err_code); + // Start Security Request timer. + err_code = app_timer_start(m_sec_req_timer_id, SECURITY_REQUEST_DELAY, NULL); + APP_ERROR_CHECK(err_code); + } break; + + case BLE_GAP_EVT_PHY_UPDATE_REQUEST: + { + NRF_LOG_DEBUG("PHY update request."); + ble_gap_phys_t const phys = + { + .rx_phys = BLE_GAP_PHY_AUTO, + .tx_phys = BLE_GAP_PHY_AUTO, + }; + err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys); + APP_ERROR_CHECK(err_code); + } break; + + case BLE_GATTC_EVT_TIMEOUT: + // Disconnect on GATT Client timeout event. + NRF_LOG_DEBUG("GATT Client Timeout."); + err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + APP_ERROR_CHECK(err_code); + break; + + case BLE_GATTS_EVT_TIMEOUT: + // Disconnect on GATT Server timeout event. + NRF_LOG_DEBUG("GATT Server Timeout."); + err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + APP_ERROR_CHECK(err_code); + break; + + case BLE_GAP_EVT_SEC_PARAMS_REQUEST: + NRF_LOG_DEBUG("BLE_GAP_EVT_SEC_PARAMS_REQUEST"); + break; + + case BLE_GAP_EVT_PASSKEY_DISPLAY: + { + char passkey[PASSKEY_LENGTH + 1]; + memcpy(passkey, p_ble_evt->evt.gap_evt.params.passkey_display.passkey, PASSKEY_LENGTH); + passkey[PASSKEY_LENGTH] = 0; + // Don't send delayed Security Request if security procedure is already in progress. + err_code = app_timer_stop(m_sec_req_timer_id); + APP_ERROR_CHECK(err_code); + + NRF_LOG_INFO("Passkey: %s", nrf_log_push(passkey)); + } break; + + default: + // No implementation needed. + break; + } +} + + +/**@brief Function for initializing the BLE stack. + * + * @details Initializes the SoftDevice and the BLE event interrupt. + */ +static void ble_stack_init(void) +{ + ret_code_t err_code; + + err_code = nrf_sdh_enable_request(); + APP_ERROR_CHECK(err_code); + + // Configure the BLE stack using the default settings. + // Fetch the start address of the application RAM. + uint32_t ram_start = 0; + err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start); + APP_ERROR_CHECK(err_code); + + // Enable BLE stack. + err_code = nrf_sdh_ble_enable(&ram_start); + APP_ERROR_CHECK(err_code); + + // Register a handler for BLE events. + NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL); +} + + +/**@brief Function for handling events from the BSP module. + * + * @param[in] event Event generated by button press. + */ +static void bsp_event_handler(bsp_event_t event) +{ + ret_code_t err_code; + + switch (event) + { + case BSP_EVENT_SLEEP: + sleep_mode_enter(); + break; // BSP_EVENT_SLEEP + + case BSP_EVENT_DISCONNECT: + err_code = sd_ble_gap_disconnect(m_conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + if (err_code != NRF_ERROR_INVALID_STATE) + { + APP_ERROR_CHECK(err_code); + } + break; // BSP_EVENT_DISCONNECT + + case BSP_EVENT_WHITELIST_OFF: + if (m_conn_handle == BLE_CONN_HANDLE_INVALID) + { + err_code = ble_advertising_restart_without_whitelist(&m_advertising); + if (err_code != NRF_ERROR_INVALID_STATE) + { + APP_ERROR_CHECK(err_code); + } + } + break; // BSP_EVENT_WHITELIST_OFF + + case BSP_EVENT_KEY_1: + read_glucose_measurement(); + break; // BSP_EVENT_KEY_1 + + default: + break; + } +} + + +/**@brief Function for the Peer Manager initialization. + */ +static void peer_manager_init(void) +{ + ble_gap_sec_params_t sec_param; + ret_code_t err_code; + + err_code = pm_init(); + APP_ERROR_CHECK(err_code); + + memset(&sec_param, 0, sizeof(ble_gap_sec_params_t)); + + // Security parameters to be used for all security procedures. + sec_param.bond = SEC_PARAM_BOND; + sec_param.mitm = SEC_PARAM_MITM; + sec_param.lesc = SEC_PARAM_LESC; + sec_param.keypress = SEC_PARAM_KEYPRESS; + sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES; + sec_param.oob = SEC_PARAM_OOB; + sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE; + sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE; + sec_param.kdist_own.enc = 1; + sec_param.kdist_own.id = 1; + sec_param.kdist_peer.enc = 1; + sec_param.kdist_peer.id = 1; + + err_code = pm_sec_params_set(&sec_param); + APP_ERROR_CHECK(err_code); + + err_code = pm_register(pm_evt_handler); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Clear bond information from persistent storage. + */ +static void delete_bonds(void) +{ + ret_code_t err_code; + + NRF_LOG_INFO("Erase bonds!"); + + err_code = pm_peers_delete(); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for initializing the Advertising functionality. + * + * @details Encodes the required advertising data and passes it to the stack. + * Also builds a structure to be passed to the stack when starting advertising. + */ +static void advertising_init(void) +{ + uint32_t err_code; + ble_advertising_init_t init; + + memset(&init, 0, sizeof(init)); + + init.advdata.name_type = BLE_ADVDATA_FULL_NAME; + init.advdata.include_appearance = true; + init.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE; + init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]); + init.advdata.uuids_complete.p_uuids = m_adv_uuids; + + init.config.ble_adv_fast_enabled = true; + init.config.ble_adv_fast_interval = APP_ADV_INTERVAL; + init.config.ble_adv_fast_timeout = APP_ADV_DURATION; + + init.evt_handler = on_adv_evt; + + err_code = ble_advertising_init(&m_advertising, &init); + APP_ERROR_CHECK(err_code); + + ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG); +} + + +/**@brief Function for initializing buttons and leds. + * + * @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up. + */ +static void buttons_leds_init(bool * p_erase_bonds) +{ + ret_code_t err_code; + bsp_event_t startup_event; + + err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler); + APP_ERROR_CHECK(err_code); + + err_code = bsp_btn_ble_init(NULL, &startup_event); + APP_ERROR_CHECK(err_code); + + *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA); +} + + +/**@brief Function for initializing the nrf log module. + */ +static void log_init(void) +{ + ret_code_t err_code = NRF_LOG_INIT(NULL); + APP_ERROR_CHECK(err_code); + + NRF_LOG_DEFAULT_BACKENDS_INIT(); +} + + +/**@brief Function for initializing power management. + */ +static void power_management_init(void) +{ + ret_code_t err_code; + err_code = nrf_pwr_mgmt_init(); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling the idle state (main loop). + * + * @details If there is no pending log operation, then sleep until next the next event occurs. + */ +static void idle_state_handle(void) +{ + if (NRF_LOG_PROCESS() == false) + { + nrf_pwr_mgmt_run(); + } +} + + +/**@brief Function for starting advertising. + */ +static void advertising_start(bool erase_bonds) +{ + if (erase_bonds == true) + { + delete_bonds(); + // Advertising is started by PM_EVT_PEERS_DELETE_SUCCEEDED event. + } + else + { + ret_code_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST); + + APP_ERROR_CHECK(err_code); + } +} + + +/**@brief Function for application main entry. + */ +int main(void) +{ + bool erase_bonds; + + // Initialize. + log_init(); + timers_init(); + buttons_leds_init(&erase_bonds); + power_management_init(); + ble_stack_init(); + gap_params_init(); + gatt_init(); + advertising_init(); + services_init(); + sensor_simulator_init(); + conn_params_init(); + peer_manager_init(); + + // Start execution. + NRF_LOG_INFO("Glucose example started."); + application_timers_start(); + advertising_start(erase_bonds); + + // Enter main loop. + for (;;) + { + idle_state_handle(); + } +} + + +/** + * @} + */ |