diff options
author | Trygve Laugstøl <trygvis@inamo.no> | 2018-08-23 17:08:59 +0200 |
---|---|---|
committer | Trygve Laugstøl <trygvis@inamo.no> | 2018-08-23 17:12:21 +0200 |
commit | 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a (patch) | |
tree | ab49cc16ed0b853452c5c2ed2d3042416d628986 /thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc | |
download | iot-sensors-master.tar.gz iot-sensors-master.tar.bz2 iot-sensors-master.tar.xz iot-sensors-master.zip |
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc')
15 files changed, 4742 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/FILES b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/FILES new file mode 100644 index 0000000..e588575 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/FILES @@ -0,0 +1,9 @@ +doxygen/ - Configuration files and scripts to create the lwIP doxygen source + documentation (found at http://www.nongnu.org/lwip/) + +savannah.txt - How to obtain the current development source code. +contrib.txt - How to contribute to lwIP as a developer. +rawapi.txt - The documentation for the core API of lwIP. + Also provides an overview about the other APIs and multithreading. +sys_arch.txt - The documentation for a system abstraction layer of lwIP. +ppp.txt - Documentation of the PPP interface for lwIP. diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/NO_SYS_SampleCode.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/NO_SYS_SampleCode.c new file mode 100644 index 0000000..f5c6c10 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/NO_SYS_SampleCode.c @@ -0,0 +1,117 @@ +void eth_mac_irq() +{ + /* Service MAC IRQ here */ + + /* Allocate pbuf from pool (avoid using heap in interrupts) */ + struct pbuf* p = pbuf_alloc(PBUF_RAW, eth_data_count, PBUF_POOL); + + if(p != NULL) { + /* Copy ethernet frame into pbuf */ + pbuf_take(p, eth_data, eth_data_count); + + /* Put in a queue which is processed in main loop */ + if(!queue_try_put(&queue, p)) { + /* queue is full -> packet loss */ + pbuf_free(p); + } + } +} + +static err_t netif_output(struct netif *netif, struct pbuf *p) +{ + LINK_STATS_INC(link.xmit); + + /* Update SNMP stats (only if you use SNMP) */ + MIB2_STATS_NETIF_ADD(netif, ifoutoctets, p->tot_len); + int unicast = ((p->payload[0] & 0x01) == 0); + if (unicast) { + MIB2_STATS_NETIF_INC(netif, ifoutucastpkts); + } else { + MIB2_STATS_NETIF_INC(netif, ifoutnucastpkts); + } + + lock_interrupts(); + pbuf_copy_partial(p, mac_send_buffer, p->tot_len, 0); + /* Start MAC transmit here */ + unlock_interrupts(); + + return ERR_OK; +} + +static void netif_status_callback(struct netif *netif) +{ + printf("netif status changed %s\n", ip4addr_ntoa(netif_ip4_addr(netif))); +} + +static err_t netif_init(struct netif *netif) +{ + netif->linkoutput = netif_output; + netif->output = etharp_output; + netif->output_ip6 = ethip6_output; + netif->mtu = ETHERNET_MTU; + netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_ETHERNET | NETIF_FLAG_IGMP | NETIF_FLAG_MLD6; + MIB2_INIT_NETIF(netif, snmp_ifType_ethernet_csmacd, 100000000); + + SMEMCPY(netif->hwaddr, your_mac_address_goes_here, sizeof(netif->hwaddr)); + netif->hwaddr_len = sizeof(netif->hwaddr); + + return ERR_OK; +} + +void main(void) +{ + struct netif netif; + + lwip_init(); + + netif_add(&netif, IP4_ADDR_ANY, IP4_ADDR_ANY, IP4_ADDR_ANY, NULL, netif_init, netif_input); + netif.name[0] = 'e'; + netif.name[1] = '0'; + netif_create_ip6_linklocal_address(&netif, 1); + netif.ip6_autoconfig_enabled = 1; + netif_set_status_callback(&netif, netif_status_callback); + netif_set_default(&netif); + netif_set_up(&netif); + + /* Start DHCP and HTTPD */ + dhcp_init(); + httpd_init(); + + while(1) { + /* Check link state, e.g. via MDIO communication with PHY */ + if(link_state_changed()) { + if(link_is_up()) { + netif_set_link_up(&netif); + } else { + netif_set_link_down(&netif); + } + } + + /* Check for received frames, feed them to lwIP */ + lock_interrupts(); + struct pbuf* p = queue_try_get(&queue); + unlock_interrupts(); + + if(p != NULL) { + LINK_STATS_INC(link.recv); + + /* Update SNMP stats (only if you use SNMP) */ + MIB2_STATS_NETIF_ADD(netif, ifinoctets, p->tot_len); + int unicast = ((p->payload[0] & 0x01) == 0); + if (unicast) { + MIB2_STATS_NETIF_INC(netif, ifinucastpkts); + } else { + MIB2_STATS_NETIF_INC(netif, ifinnucastpkts); + } + + if(netif.input(p, &netif) != ERR_OK) { + pbuf_free(p); + } + } + + /* Cyclic lwIP timers check */ + sys_check_timeouts(); + + /* your application goes here */ + } +} diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/contrib.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/contrib.txt new file mode 100644 index 0000000..6f0d7bc --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/contrib.txt @@ -0,0 +1,58 @@ +1 Introduction + +This document describes some guidelines for people participating +in lwIP development. + +2 How to contribute to lwIP + +Here is a short list of suggestions to anybody working with lwIP and +trying to contribute bug reports, fixes, enhancements, platform ports etc. +First of all as you may already know lwIP is a volunteer project so feedback +to fixes or questions might often come late. Hopefully the bug and patch tracking +features of Savannah help us not lose users' input. + +2.1 Source code style: + +1. do not use tabs. +2. indentation is two spaces per level (i.e. per tab). +3. end debug messages with a trailing newline (\n). +4. one space between keyword and opening bracket. +5. no space between function and opening bracket. +6. one space and no newline before opening curly braces of a block. +7. closing curly brace on a single line. +8. spaces surrounding assignment and comparisons. +9. don't initialize static and/or global variables to zero, the compiler takes care of that. +10. use current source code style as further reference. + +2.2 Source code documentation style: + +1. JavaDoc compliant and Doxygen compatible. +2. Function documentation above functions in .c files, not .h files. + (This forces you to synchronize documentation and implementation.) +3. Use current documentation style as further reference. + +2.3 Bug reports and patches: + +1. Make sure you are reporting bugs or send patches against the latest + sources. (From the latest release and/or the current Git sources.) +2. If you think you found a bug make sure it's not already filed in the + bugtracker at Savannah. +3. If you have a fix put the patch on Savannah. If it is a patch that affects + both core and arch specific stuff please separate them so that the core can + be applied separately while leaving the other patch 'open'. The preferred way + is to NOT touch archs you can't test and let maintainers take care of them. + This is a good way to see if they are used at all - the same goes for unix + netifs except tapif. +4. Do not file a bug and post a fix to it to the patch area. Either a bug report + or a patch will be enough. + If you correct an existing bug then attach the patch to the bug rather than creating a new entry in the patch area. +5. Patches should be specific to a single change or to related changes. Do not mix bugfixes with spelling and other + trivial fixes unless the bugfix is trivial too. Do not reorganize code and rename identifiers in the same patch you + change behaviour if not necessary. A patch is easier to read and understand if it's to the point and short than + if it's not to the point and long :) so the chances for it to be applied are greater. + +2.4 Platform porters: + +1. If you have ported lwIP to a platform (an OS, a uC/processor or a combination of these) and + you think it could benefit others[1] you might want discuss this on the mailing list. You + can also ask for Git access to submit and maintain your port in the contrib Git module. diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/generate.bat b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/generate.bat new file mode 100644 index 0000000..99afb12 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/generate.bat @@ -0,0 +1 @@ +doxygen lwip.Doxyfile diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/generate.sh b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/generate.sh new file mode 100644 index 0000000..89344b0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/generate.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +doxygen lwip.Doxyfile diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/lwip.Doxyfile b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/lwip.Doxyfile new file mode 100644 index 0000000..0e3349a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/lwip.Doxyfile @@ -0,0 +1,2505 @@ +# Doxyfile 1.8.11 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "lwIP" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = "2.0.2" + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = "Lightweight IP stack" + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = output + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class " \ + "The $name widget " \ + "The $name file " \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = ../../ + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = YES + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = YES + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text " + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING +# Note: If this tag is empty the current directory is searched. + +INPUT = main_page.h ../../src + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl, +# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js. + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.idl \ + *.odl \ + *.inc \ + *.m \ + *.mm \ + *.dox + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = ../../src/include/netif/ppp/polarssl + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = ../ ../../ + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = main_page.h + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse-libclang=ON option for CMake. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = NO + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = lwip.chm + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = NO + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = NO + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = ../../src/include + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = *.h + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = __DOXYGEN__=1 \ + NO_SYS=0 \ + SYS_LIGHTWEIGHT_PROT=1 \ + LWIP_TCPIP_CORE_LOCKING=1 \ + LWIP_IPV4=1 \ + LWIP_IPV6=1 \ + LWIP_ICMP=1 \ + LWIP_RAW=1 \ + LWIP_DHCP=1 \ + LWIP_UDPLITE=1 \ + LWIP_UDP=1 \ + LWIP_IGMP=1 \ + LWIP_TCP=1 \ + TCP_LISTEN_BACKLOG=1 \ + LWIP_SNMP=1 \ + SNMP_USE_NETCONN=1 \ + SNMP_USE_RAW=1 \ + MIB2_STATS=1 \ + LWIP_MDNS_RESPONDER=1 \ + MEMP_OVERFLOW_CHECK=0 \ + MEMP_SANITY_CHECK=1 \ + LWIP_ARP=1 \ + LWIP_HAVE_LOOPIF=1 \ + LWIP_NETIF_HOSTNAME=1 \ + LWIP_NETIF_API=1 \ + LWIP_NETIF_CALLBACK=1 \ + LWIP_NETIF_STATUS_CALLBACK=1 \ + LWIP_NETIF_REMOVE_CALLBACK=1 \ + LWIP_NETIF_LINK_CALLBACK=1 \ + LWIP_NUM_NETIF_CLIENT_DATA=1 \ + ENABLE_LOOPBACK=1 \ + LWIP_AUTOIP=1 \ + ARP_QUEUEING=1 \ + LWIP_STATS=1 \ + MEM_USE_POOLS=0 \ + LWIP_DNS=1 \ + LWIP_SOCKET=1 \ + LWIP_NETCONN=1 \ + IP_SOF_BROADCAST=1 \ + IP_SOF_BROADCAST_RECV=1 \ + LWIP_NETIF_API=1 \ + LWIP_SO_SNDTIMEO=1 \ + LWIP_SO_RCVBUF=1 \ + LWIP_SO_LINGER=1 \ + SO_REUSE=1 \ + SO_REUSE_RXTOALL=1 \ + LWIP_HAVE_SLIPIF=1 \ + LWIP_6LOWPAN=1 + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: YES. + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = YES + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, +# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, +# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 1000 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/main_page.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/main_page.h new file mode 100644 index 0000000..d35d16e --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/main_page.h @@ -0,0 +1,132 @@ +/** + * @defgroup lwip lwIP + * + * @defgroup infrastructure Infrastructure + * + * @defgroup callbackstyle_api Callback-style APIs + * Non thread-safe APIs, callback style for maximum performance and minimum + * memory footprint. + * + * @defgroup sequential_api Sequential-style APIs + * Sequential-style APIs, blocking functions. More overhead, but can be called + * from any thread except TCPIP thread. + * + * @defgroup addons Addons + * + * @defgroup apps Applications + */ + +/** + * @mainpage Overview + * @verbinclude "README" + */ + +/** + * @page upgrading Upgrading + * @verbinclude "UPGRADING" + */ + +/** + * @page changelog Changelog + * @verbinclude "CHANGELOG" + */ + +/** + * @page contrib How to contribute to lwIP + * @verbinclude "contrib.txt" + */ + +/** + * @page pitfalls Common pitfalls + * + * Multiple Execution Contexts in lwIP code + * ======================================== + * + * The most common source of lwIP problems is to have multiple execution contexts + * inside the lwIP code. + * + * lwIP can be used in two basic modes: @ref lwip_nosys (no OS/RTOS + * running on target system) or @ref lwip_os (there is an OS running + * on the target system). + * + * Mainloop Mode + * ------------- + * In mainloop mode, only @ref callbackstyle_api can be used. + * The user has two possibilities to ensure there is only one + * exection context at a time in lwIP: + * + * 1) Deliver RX ethernet packets directly in interrupt context to lwIP + * by calling netif->input directly in interrupt. This implies all lwIP + * callback functions are called in IRQ context, which may cause further + * problems in application code: IRQ is blocked for a long time, multiple + * execution contexts in application code etc. When the application wants + * to call lwIP, it only needs to disable interrupts during the call. + * If timers are involved, even more locking code is needed to lock out + * timer IRQ and ethernet IRQ from each other, assuming these may be nested. + * + * 2) Run lwIP in a mainloop. There is example code here: @ref lwip_nosys. + * lwIP is _ONLY_ called from mainloop callstacks here. The ethernet IRQ + * has to put received telegrams into a queue which is polled in the + * mainloop. Ensure lwIP is _NEVER_ called from an interrupt, e.g. + * some SPI IRQ wants to forward data to udp_send() or tcp_write()! + * + * OS Mode + * ------- + * In OS mode, @ref callbackstyle_api AND @ref sequential_api can be used. + * @ref sequential_api are designed to be called from threads other than + * the TCPIP thread, so there is nothing to consider here. + * But @ref callbackstyle_api functions must _ONLY_ be called from + * TCPIP thread. It is a common error to call these from other threads + * or from IRQ contexts. Ethernet RX needs to deliver incoming packets + * in the correct way by sending a message to TCPIP thread, this is + * implemented in tcpip_input(). + * Again, ensure lwIP is _NEVER_ called from an interrupt, e.g. + * some SPI IRQ wants to forward data to udp_send() or tcp_write()! + * + * 1) tcpip_callback() can be used get called back from TCPIP thread, + * it is safe to call any @ref callbackstyle_api from there. + * + * 2) Use @ref LWIP_TCPIP_CORE_LOCKING. All @ref callbackstyle_api + * functions can be called when lwIP core lock is aquired, see + * @ref LOCK_TCPIP_CORE() and @ref UNLOCK_TCPIP_CORE(). + * These macros cannot be used in an interrupt context! + * Note the OS must correctly handle priority inversion for this. + */ + +/** + * @page bugs Reporting bugs + * Please report bugs in the lwIP bug tracker at savannah.\n + * BEFORE submitting, please check if the bug has already been reported!\n + * https://savannah.nongnu.org/bugs/?group=lwip + */ + +/** + * @defgroup lwip_nosys Mainloop mode ("NO_SYS") + * @ingroup lwip + * Use this mode if you do not run an OS on your system. \#define NO_SYS to 1. + * Feed incoming packets to netif->input(pbuf, netif) function from mainloop, + * *not* *from* *interrupt* *context*. You can allocate a @ref pbuf in interrupt + * context and put them into a queue which is processed from mainloop.\n + * Call sys_check_timeouts() periodically in the mainloop.\n + * Porting: implement all functions in @ref sys_time, @ref sys_prot and + * @ref compiler_abstraction.\n + * You can only use @ref callbackstyle_api in this mode.\n + * Sample code:\n + * @include NO_SYS_SampleCode.c + */ + +/** + * @defgroup lwip_os OS mode (TCPIP thread) + * @ingroup lwip + * Use this mode if you run an OS on your system. It is recommended to + * use an RTOS that correctly handles priority inversion and + * to use @ref LWIP_TCPIP_CORE_LOCKING.\n + * Porting: implement all functions in @ref sys_layer.\n + * You can use @ref callbackstyle_api together with @ref tcpip_callback, + * and all @ref sequential_api. + */ + +/** + * @page raw_api lwIP API + * @verbinclude "rawapi.txt" + */ diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/output/index.html b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/output/index.html new file mode 100644 index 0000000..a52e09f --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/doxygen/output/index.html @@ -0,0 +1,10 @@ +<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> +<html xmlns="http://www.w3.org/1999/xhtml"> +<head> + <title>Redirection</title> + <meta http-equiv="refresh" content="0; url=html/index.html" /> +</head> +<body> + <a href="html/index.html">index.html</a> +</body> +</html> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/mdns.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/mdns.txt new file mode 100644 index 0000000..c322843 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/mdns.txt @@ -0,0 +1,113 @@ +Multicast DNS for lwIP + +Author: Erik Ekman + + +Note! The MDNS responder does not have all features required by the standards. +See notes in src/apps/mdns/mdns.c for what is left. It is however usable in normal +cases - but watch out if many devices on the same network try to use the same +host/service instance names. + + +How to enable: +============== + +MDNS support does not depend on DNS. +MDNS supports using IPv4 only, v6 only, or v4+v6. + +To enable MDNS responder, set + LWIP_MDNS_RESPONDER = 1 +in lwipopts.h and add src/apps/mdns/mdns.c to your list of files to build. + +The max number of services supported per netif is defined by MDNS_MAX_SERVICES, +default is 1. + +Increase MEMP_NUM_UDP_PCB by 1. MDNS needs one PCB. +Increase LWIP_NUM_NETIF_CLIENT_DATA by 1 (MDNS needs one entry on netif). + +MDNS with IPv4 requires LWIP_IGMP = 1, and preferably LWIP_AUTOIP = 1. +MDNS with IPv6 requires LWIP_IPV6_MLD = 1, and that a link-local address is +generated. + +The MDNS code puts its structs on the stack where suitable to reduce dynamic +memory allocation. It may use up to 1kB of stack. + +MDNS needs a strncasecmp() implementation. If you have one, define +LWIP_MDNS_STRNCASECMP to it. Otherwise the code will provide an implementation +for you. + + +How to use: +=========== + +Call mdns_resp_init() during system initialization. +This opens UDP sockets on port 5353 for IPv4 and IPv6. + + +To start responding on a netif, run + mdns_resp_add_netif(struct netif *netif, char *hostname, u32_t dns_ttl) + +The hostname will be copied. If this returns successfully, the netif will join +the multicast groups and any MDNS/legacy DNS requests sent unicast or multicast +to port 5353 will be handled: +- <hostname>.local type A, AAAA or ANY returns relevant IP addresses +- Reverse lookups (PTR in-addr.arpa, ip6.arpa) of netif addresses + returns <hostname>.local +Answers will use the supplied TTL (in seconds) +MDNS allows UTF-8 names, but it is recommended to stay within ASCII, +since the default case-insensitive comparison assumes this. + +It is recommended to call this function after an IPv4 address has been set, +since there is currently no check if the v4 address is valid. + +Call mdns_resp_netif_settings_changed() every time the IP address +on the netif has changed. + +To stop responding on a netif, run + mdns_resp_remove_netif(struct netif *netif) + + +Adding services: +================ + +The netif first needs to be registered. Then run + mdns_resp_add_service(struct netif *netif, char *name, char *service, + u16_t proto, u16_t port, u32_t dns_ttl, + service_get_txt_fn_t txt_fn, void *txt_userdata); + +The name and service pointers will be copied. Name refers to the name of the +service instance, and service is the type of service, like _http +proto can be DNSSD_PROTO_UDP or DNSSD_PROTO_TCP which represent _udp and _tcp. +If this call returns successfully, the following queries will be answered: +- _services._dns-sd._udp.local type PTR returns <service>.<proto>.local +- <service>.<proto>.local type PTR returns <name>.<service>.<proto>.local +- <name>.<service>.<proto>.local type SRV returns hostname and port of service +- <name>.<service>.<proto>.local type TXT builds text strings by calling txt_fn + with the supplied userdata. The callback adds strings to the reply by calling + mdns_resp_add_service_txtitem(struct mdns_service *service, char *txt, + int txt_len). Example callback method: + + static void srv_txt(struct mdns_service *service, void *txt_userdata) + { + res = mdns_resp_add_service_txtitem(service, "path=/", 6); + LWIP_ERROR("mdns add service txt failed\n", (res == ERR_OK), return); + } + + Since a hostname struct is used for TXT storage each single item can be max + 63 bytes long, and the total max length (including length bytes for each + item) is 255 bytes. + +If your device runs a webserver on port 80, an example call might be: + + mdns_resp_add_service(netif, "myweb", "_http" + DNSSD_PROTO_TCP, 80, 3600, srv_txt, NULL); + +which will publish myweb._http._tcp.local for any hosts looking for web servers, +and point them to <hostname>.local:80 + +Relevant information will be sent as additional records to reduce number of +requests required from a client. + +Removing services is currently not supported. Services are removed when the +netif is removed. + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/mqtt_client.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/mqtt_client.txt new file mode 100644 index 0000000..3e67def --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/mqtt_client.txt @@ -0,0 +1,162 @@ +MQTT client for lwIP + +Author: Erik Andersson + +Details of the MQTT protocol can be found at: +http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html + +----------------------------------------------------------------- +1. Initial steps, reserve memory and make connection to server: + +1.1: Provide storage + +Static allocation: + mqtt_client_t static_client; + example_do_connect(&static_client); + +Dynamic allocation: + mqtt_client_t *client = mqtt_client_new(); + if(client != NULL) { + example_do_connect(&client); + } + +1.2: Establish Connection with server + +void example_do_connect(mqtt_client_t *client) +{ + struct mqtt_connect_client_info_t ci; + err_t err; + + /* Setup an empty client info structure */ + memset(&ci, 0, sizeof(ci)); + + /* Minimal amount of information required is client identifier, so set it here */ + ci.client_id = "lwip_test"; + + /* Initiate client and connect to server, if this fails immediately an error code is returned + otherwise mqtt_connection_cb will be called with connection result after attempting + to establish a connection with the server. + For now MQTT version 3.1.1 is always used */ + + err = mqtt_client_connect(client, ip_addr, MQTT_PORT, mqtt_connection_cb, 0, &ci); + + /* For now just print the result code if something goes wrong + if(err != ERR_OK) { + printf("mqtt_connect return %d\n", err); + } +} + +Connection to server can also be probed by calling mqtt_client_is_connected(client) + +----------------------------------------------------------------- +2. Implementing the connection status callback + + +static void mqtt_connection_cb(mqtt_client_t *client, void *arg, mqtt_connection_status_t status) +{ + err_t err; + if(status == MQTT_CONNECT_ACCEPTED) { + printf("mqtt_connection_cb: Successfully connected\n"); + + /* Setup callback for incoming publish requests */ + mqtt_set_inpub_callback(client, mqtt_incoming_publish_cb, mqtt_incoming_data_cb, arg); + + /* Subscribe to a topic named "subtopic" with QoS level 1, call mqtt_sub_request_cb with result */ + err = mqtt_subscribe(client, "subtopic", 1, mqtt_sub_request_cb, arg); + + if(err != ERR_OK) { + printf("mqtt_subscribe return: %d\n", err); + } + } else { + printf("mqtt_connection_cb: Disconnected, reason: %d\n", status); + + /* Its more nice to be connected, so try to reconnect */ + example_do_connect(client); + } +} + +static void mqtt_sub_request_cb(void *arg, err_t result) +{ + /* Just print the result code here for simplicity, + normal behaviour would be to take some action if subscribe fails like + notifying user, retry subscribe or disconnect from server */ + printf("Subscribe result: %d\n", result); +} + +----------------------------------------------------------------- +3. Implementing callbacks for incoming publish and data + +/* The idea is to demultiplex topic and create some reference to be used in data callbacks + Example here uses a global variable, better would be to use a member in arg + If RAM and CPU budget allows it, the easiest implementation might be to just take a copy of + the topic string and use it in mqtt_incoming_data_cb +*/ +static int inpub_id; +static void mqtt_incoming_publish_cb(void *arg, const char *topic, u32_t tot_len) +{ + printf("Incoming publish at topic %s with total length %u\n", topic, (unsigned int)tot_len); + + /* Decode topic string into a user defined reference */ + if(strcmp(topic, "print_payload") == 0) { + inpub_id = 0; + } else if(topic[0] == 'A') { + /* All topics starting with 'A' might be handled at the same way */ + inpub_id = 1; + } else { + /* For all other topics */ + inpub_id = 2; + } +} + +static void mqtt_incoming_data_cb(void *arg, const u8_t *data, u16_t len, u8_t flags) +{ + printf("Incoming publish payload with length %d, flags %u\n", len, (unsigned int)flags); + + if(flags & MQTT_DATA_FLAG_LAST) { + /* Last fragment of payload received (or whole part if payload fits receive buffer + See MQTT_VAR_HEADER_BUFFER_LEN) */ + + /* Call function or do action depending on reference, in this case inpub_id */ + if(inpub_id == 0) { + /* Don't trust the publisher, check zero termination */ + if(data[len-1] == 0) { + printf("mqtt_incoming_data_cb: %s\n", (const char *)data); + } + } else if(inpub_id == 1) { + /* Call an 'A' function... */ + } else { + printf("mqtt_incoming_data_cb: Ignoring payload...\n"); + } + } else { + /* Handle fragmented payload, store in buffer, write to file or whatever */ + } +} + +----------------------------------------------------------------- +4. Using outgoing publish + + +void example_publish(mqtt_client_t *client, void *arg) +{ + const char *pub_payload= "PubSubHubLubJub"; + err_t err; + u8_t qos = 2; /* 0 1 or 2, see MQTT specification */ + u8_t retain = 0; /* No don't retain such crappy payload... */ + err = mqtt_publish(client, "pub_topic", pub_payload, strlen(pub_payload), qos, retain, mqtt_pub_request_cb, arg); + if(err != ERR_OK) { + printf("Publish err: %d\n", err); + } +} + +/* Called when publish is complete either with sucess or failure */ +static void mqtt_pub_request_cb(void *arg, err_t result) +{ + if(result != ERR_OK) { + printf("Publish result: %d\n", result); + } +} + +----------------------------------------------------------------- +5. Disconnecting + +Simply call mqtt_disconnect(client) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/ppp.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/ppp.txt new file mode 100644 index 0000000..8b88b3a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/ppp.txt @@ -0,0 +1,529 @@ +PPP interface for lwIP + +Author: Sylvain Rochet + +Table of Contents: + +1 - Supported PPP protocols and features +2 - Raw API PPP example for all protocols +3 - PPPoS input path (raw API, IRQ safe API, TCPIP API) +4 - Thread safe PPP API (PPPAPI) +5 - Notify phase callback (PPP_NOTIFY_PHASE) +6 - Upgrading from lwIP <= 1.4.x to lwIP >= 2.0.x + + + +1 Supported PPP protocols and features +====================================== + +Supported Low level protocols: +* PPP over serial using HDLC-like framing, such as wired dialup modems + or mobile telecommunications GPRS/EDGE/UMTS/HSPA+/LTE modems +* PPP over Ethernet, such as xDSL modems +* PPP over L2TP (Layer 2 Tunneling Protocol) LAC (L2TP Access Concentrator), + IP tunnel over UDP, such as VPN access + +Supported auth protocols: +* PAP, Password Authentication Protocol +* CHAP, Challenge-Handshake Authentication Protocol, also known as CHAP-MD5 +* MSCHAPv1, Microsoft version of CHAP, version 1 +* MSCHAPv2, Microsoft version of CHAP, version 2 +* EAP, Extensible Authentication Protocol + +Supported address protocols: +* IPCP, IP Control Protocol, IPv4 addresses negotiation +* IP6CP, IPv6 Control Protocol, IPv6 link-local addresses negotiation + +Supported encryption protocols: +* MPPE, Microsoft Point-to-Point Encryption + +Supported compression or miscellaneous protocols, for serial links only: +* PFC, Protocol Field Compression +* ACFC, Address-and-Control-Field-Compression +* ACCM, Asynchronous-Control-Character-Map +* VJ, Van Jacobson TCP/IP Header Compression + + + +2 Raw API PPP example for all protocols +======================================= + +As usual, raw API for lwIP means the lightweight API which *MUST* only be used +for NO_SYS=1 systems or called inside lwIP core thread for NO_SYS=0 systems. + +/* + * Globals + * ======= + */ + +/* The PPP control block */ +ppp_pcb *ppp; + +/* The PPP IP interface */ +struct netif ppp_netif; + + +/* + * PPP status callback + * =================== + * + * PPP status callback is called on PPP status change (up, down, …) from lwIP + * core thread + */ + +/* PPP status callback example */ +static void status_cb(ppp_pcb *pcb, int err_code, void *ctx) { + struct netif *pppif = ppp_netif(pcb); + LWIP_UNUSED_ARG(ctx); + + switch(err_code) { + case PPPERR_NONE: { +#if LWIP_DNS + const ip_addr_t *ns; +#endif /* LWIP_DNS */ + printf("status_cb: Connected\n"); +#if PPP_IPV4_SUPPORT + printf(" our_ipaddr = %s\n", ipaddr_ntoa(&pppif->ip_addr)); + printf(" his_ipaddr = %s\n", ipaddr_ntoa(&pppif->gw)); + printf(" netmask = %s\n", ipaddr_ntoa(&pppif->netmask)); +#if LWIP_DNS + ns = dns_getserver(0); + printf(" dns1 = %s\n", ipaddr_ntoa(ns)); + ns = dns_getserver(1); + printf(" dns2 = %s\n", ipaddr_ntoa(ns)); +#endif /* LWIP_DNS */ +#endif /* PPP_IPV4_SUPPORT */ +#if PPP_IPV6_SUPPORT + printf(" our6_ipaddr = %s\n", ip6addr_ntoa(netif_ip6_addr(pppif, 0))); +#endif /* PPP_IPV6_SUPPORT */ + break; + } + case PPPERR_PARAM: { + printf("status_cb: Invalid parameter\n"); + break; + } + case PPPERR_OPEN: { + printf("status_cb: Unable to open PPP session\n"); + break; + } + case PPPERR_DEVICE: { + printf("status_cb: Invalid I/O device for PPP\n"); + break; + } + case PPPERR_ALLOC: { + printf("status_cb: Unable to allocate resources\n"); + break; + } + case PPPERR_USER: { + printf("status_cb: User interrupt\n"); + break; + } + case PPPERR_CONNECT: { + printf("status_cb: Connection lost\n"); + break; + } + case PPPERR_AUTHFAIL: { + printf("status_cb: Failed authentication challenge\n"); + break; + } + case PPPERR_PROTOCOL: { + printf("status_cb: Failed to meet protocol\n"); + break; + } + case PPPERR_PEERDEAD: { + printf("status_cb: Connection timeout\n"); + break; + } + case PPPERR_IDLETIMEOUT: { + printf("status_cb: Idle Timeout\n"); + break; + } + case PPPERR_CONNECTTIME: { + printf("status_cb: Max connect time reached\n"); + break; + } + case PPPERR_LOOPBACK: { + printf("status_cb: Loopback detected\n"); + break; + } + default: { + printf("status_cb: Unknown error code %d\n", err_code); + break; + } + } + +/* + * This should be in the switch case, this is put outside of the switch + * case for example readability. + */ + + if (err_code == PPPERR_NONE) { + return; + } + + /* ppp_close() was previously called, don't reconnect */ + if (err_code == PPPERR_USER) { + /* ppp_free(); -- can be called here */ + return; + } + + /* + * Try to reconnect in 30 seconds, if you need a modem chatscript you have + * to do a much better signaling here ;-) + */ + ppp_connect(pcb, 30); + /* OR ppp_listen(pcb); */ +} + + +/* + * Creating a new PPPoS session + * ============================ + * + * In lwIP, PPPoS is not PPPoSONET, in lwIP PPPoS is PPPoSerial. + */ + +#include "netif/ppp/pppos.h" + +/* + * PPPoS serial output callback + * + * ppp_pcb, PPP control block + * data, buffer to write to serial port + * len, length of the data buffer + * ctx, optional user-provided callback context pointer + * + * Return value: len if write succeed + */ +static u32_t output_cb(ppp_pcb *pcb, u8_t *data, u32_t len, void *ctx) { + return uart_write(UART, data, len); +} + +/* + * Create a new PPPoS interface + * + * ppp_netif, netif to use for this PPP link, i.e. PPP IP interface + * output_cb, PPPoS serial output callback + * status_cb, PPP status callback, called on PPP status change (up, down, …) + * ctx_cb, optional user-provided callback context pointer + */ +ppp = pppos_create(&ppp_netif, + output_cb, status_cb, ctx_cb); + + +/* + * Creating a new PPPoE session + * ============================ + */ + +#include "netif/ppp/pppoe.h" + +/* + * Create a new PPPoE interface + * + * ppp_netif, netif to use for this PPP link, i.e. PPP IP interface + * ethif, already existing and setup Ethernet interface to use + * service_name, PPPoE service name discriminator (not supported yet) + * concentrator_name, PPPoE concentrator name discriminator (not supported yet) + * status_cb, PPP status callback, called on PPP status change (up, down, …) + * ctx_cb, optional user-provided callback context pointer + */ +ppp = pppoe_create(&ppp_netif, + ðif, + service_name, concentrator_name, + status_cb, ctx_cb); + + +/* + * Creating a new PPPoL2TP session + * =============================== + */ + +#include "netif/ppp/pppol2tp.h" + +/* + * Create a new PPPoL2TP interface + * + * ppp_netif, netif to use for this PPP link, i.e. PPP IP interface + * netif, optional already existing and setup output netif, necessary if you + * want to set this interface as default route to settle the chicken + * and egg problem with VPN links + * ipaddr, IP to connect to + * port, UDP port to connect to (usually 1701) + * secret, L2TP secret to use + * secret_len, size in bytes of the L2TP secret + * status_cb, PPP status callback, called on PPP status change (up, down, …) + * ctx_cb, optional user-provided callback context pointer + */ +ppp = pppol2tp_create(&ppp_netif, + struct netif *netif, ip_addr_t *ipaddr, u16_t port, + u8_t *secret, u8_t secret_len, + ppp_link_status_cb_fn link_status_cb, void *ctx_cb); + + +/* + * Initiate PPP client connection + * ============================== + */ + +/* Set this interface as default route */ +ppp_set_default(ppp); + +/* + * Basic PPP client configuration. Can only be set if PPP session is in the + * dead state (i.e. disconnected). We don't need to provide thread-safe + * equivalents through PPPAPI because those helpers are only changing + * structure members while session is inactive for lwIP core. Configuration + * only need to be done once. + */ + +/* Ask the peer for up to 2 DNS server addresses. */ +ppp_set_usepeerdns(ppp, 1); + +/* Auth configuration, this is pretty self-explanatory */ +ppp_set_auth(ppp, PPPAUTHTYPE_ANY, "login", "password"); + +/* + * Initiate PPP negotiation, without waiting (holdoff=0), can only be called + * if PPP session is in the dead state (i.e. disconnected). + */ +u16_t holdoff = 0; +ppp_connect(ppp, holdoff); + + +/* + * Initiate PPP server listener + * ============================ + */ + +/* + * Basic PPP server configuration. Can only be set if PPP session is in the + * dead state (i.e. disconnected). We don't need to provide thread-safe + * equivalents through PPPAPI because those helpers are only changing + * structure members while session is inactive for lwIP core. Configuration + * only need to be done once. + */ +ip4_addr_t addr; + +/* Set our address */ +IP4_ADDR(&addr, 192,168,0,1); +ppp_set_ipcp_ouraddr(ppp, &addr); + +/* Set peer(his) address */ +IP4_ADDR(&addr, 192,168,0,2); +ppp_set_ipcp_hisaddr(ppp, &addr); + +/* Set primary DNS server */ +IP4_ADDR(&addr, 192,168,10,20); +ppp_set_ipcp_dnsaddr(ppp, 0, &addr); + +/* Set secondary DNS server */ +IP4_ADDR(&addr, 192,168,10,21); +ppp_set_ipcp_dnsaddr(ppp, 1, &addr); + +/* Auth configuration, this is pretty self-explanatory */ +ppp_set_auth(ppp, PPPAUTHTYPE_ANY, "login", "password"); + +/* Require peer to authenticate */ +ppp_set_auth_required(ppp, 1); + +/* + * Only for PPPoS, the PPP session should be up and waiting for input. + * + * Note: for PPPoS, ppp_connect() and ppp_listen() are actually the same thing. + * The listen call is meant for future support of PPPoE and PPPoL2TP server + * mode, where we will need to negotiate the incoming PPPoE session or L2TP + * session before initiating PPP itself. We need this call because there is + * two passive modes for PPPoS, ppp_set_passive and ppp_set_silent. + */ +ppp_set_silent(pppos, 1); + +/* + * Initiate PPP listener (i.e. wait for an incoming connection), can only + * be called if PPP session is in the dead state (i.e. disconnected). + */ +ppp_listen(ppp); + + +/* + * Closing PPP connection + * ====================== + */ + +/* + * Initiate the end of the PPP session, without carrier lost signal + * (nocarrier=0), meaning a clean shutdown of PPP protocols. + * You can call this function at anytime. + */ +u8_t nocarrier = 0; +ppp_close(ppp, nocarrier); +/* + * Then you must wait your status_cb() to be called, it may takes from a few + * seconds to several tens of seconds depending on the current PPP state. + */ + +/* + * Freeing a PPP connection + * ======================== + */ + +/* + * Free the PPP control block, can only be called if PPP session is in the + * dead state (i.e. disconnected). You need to call ppp_close() before. + */ +ppp_free(ppp); + + + +3 PPPoS input path (raw API, IRQ safe API, TCPIP API) +===================================================== + +Received data on serial port should be sent to lwIP using the pppos_input() +function or the pppos_input_tcpip() function. + +If NO_SYS is 1 and if PPP_INPROC_IRQ_SAFE is 0 (the default), pppos_input() +is not IRQ safe and then *MUST* only be called inside your main loop. + +Whatever the NO_SYS value, if PPP_INPROC_IRQ_SAFE is 1, pppos_input() is IRQ +safe and can be safely called from an interrupt context, using that is going +to reduce your need of buffer if pppos_input() is called byte after byte in +your rx serial interrupt. + +if NO_SYS is 0, the thread safe way outside an interrupt context is to use +the pppos_input_tcpip() function to pass input data to the lwIP core thread +using the TCPIP API. This is thread safe in all cases but you should avoid +passing data byte after byte because it uses heavy locking (mailbox) and it +allocates pbuf, better fill them ! + +if NO_SYS is 0 and if PPP_INPROC_IRQ_SAFE is 1, you may also use pppos_input() +from an RX thread, however pppos_input() is not thread safe by itself. You can +do that *BUT* you should NEVER call pppos_connect(), pppos_listen() and +ppp_free() if pppos_input() can still be running, doing this is NOT thread safe +at all. Using PPP_INPROC_IRQ_SAFE from an RX thread is discouraged unless you +really know what you are doing, your move ;-) + + +/* + * Fonction to call for received data + * + * ppp, PPP control block + * buffer, input buffer + * buffer_len, buffer length in bytes + */ +void pppos_input(ppp, buffer, buffer_len); + +or + +void pppos_input_tcpip(ppp, buffer, buffer_len); + + + +4 Thread safe PPP API (PPPAPI) +============================== + +There is a thread safe API for all corresponding ppp_* functions, you have to +enable LWIP_PPP_API in your lwipopts.h file, then see +include/netif/ppp/pppapi.h, this is actually pretty obvious. + + + +5 Notify phase callback (PPP_NOTIFY_PHASE) +========================================== + +Notify phase callback, enabled using the PPP_NOTIFY_PHASE config option, let +you configure a callback that is called on each PPP internal state change. +This is different from the status callback which only warns you about +up(running) and down(dead) events. + +Notify phase callback can be used, for example, to set a LED pattern depending +on the current phase of the PPP session. Here is a callback example which +tries to mimic what we usually see on xDSL modems while they are negotiating +the link, which should be self-explanatory: + +static void ppp_notify_phase_cb(ppp_pcb *pcb, u8_t phase, void *ctx) { + switch (phase) { + + /* Session is down (either permanently or briefly) */ + case PPP_PHASE_DEAD: + led_set(PPP_LED, LED_OFF); + break; + + /* We are between two sessions */ + case PPP_PHASE_HOLDOFF: + led_set(PPP_LED, LED_SLOW_BLINK); + break; + + /* Session just started */ + case PPP_PHASE_INITIALIZE: + led_set(PPP_LED, LED_FAST_BLINK); + break; + + /* Session is running */ + case PPP_PHASE_RUNNING: + led_set(PPP_LED, LED_ON); + break; + + default: + break; + } +} + + + +6 Upgrading from lwIP <= 1.4.x to lwIP >= 2.0.x +=============================================== + +PPP API was fully reworked between 1.4.x and 2.0.x releases. However porting +from previous lwIP version is pretty easy: + +* Previous PPP API used an integer to identify PPP sessions, we are now + using ppp_pcb* control block, therefore all functions changed from "int ppp" + to "ppp_pcb *ppp" + +* struct netif was moved outside the PPP structure, you have to provide a netif + for PPP interface in pppoX_create() functions + +* PPP session are not started automatically after you created them anymore, + you have to call ppp_connect(), this way you can configure the session before + starting it. + +* Previous PPP API used CamelCase, we are now using snake_case. + +* Previous PPP API mixed PPPoS and PPPoE calls, this isn't the case anymore, + PPPoS functions are now prefixed pppos_ and PPPoE functions are now prefixed + pppoe_, common functions are now prefixed ppp_. + +* New PPPERR_ error codes added, check you have all of them in your status + callback function + +* Only the following include files should now be used in user application: + #include "netif/ppp/pppapi.h" + #include "netif/ppp/pppos.h" + #include "netif/ppp/pppoe.h" + #include "netif/ppp/pppol2tp.h" + + Functions from ppp.h can be used, but you don't need to include this header + file as it is already included by above header files. + +* PPP_INPROC_OWNTHREAD was broken by design and was removed, you have to create + your own serial rx thread + +* PPP_INPROC_MULTITHREADED option was misnamed and confusing and was renamed + PPP_INPROC_IRQ_SAFE, please read the "PPPoS input path" documentation above + because you might have been fooled by that + +* If you used tcpip_callback_with_block() on ppp_ functions you may wish to use + the PPPAPI API instead. + +* ppp_sighup and ppp_close functions were merged using an optional argument + "nocarrier" on ppp_close. + +* DNS servers are now only remotely asked if LWIP_DNS is set and if + ppp_set_usepeerdns() is set to true, they are now automatically registered + using the dns_setserver() function so you don't need to do that in the PPP + callback anymore. + +* PPPoS does not use the SIO API anymore, as such it now requires a serial + output callback in place of sio_write + +* PPP_MAXIDLEFLAG is now in ms instead of jiffies diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/rawapi.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/rawapi.txt new file mode 100644 index 0000000..0cdfdce --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/rawapi.txt @@ -0,0 +1,499 @@ +Raw TCP/IP interface for lwIP + +Authors: Adam Dunkels, Leon Woestenberg, Christiaan Simons + +lwIP provides three Application Program's Interfaces (APIs) for programs +to use for communication with the TCP/IP code: +* low-level "core" / "callback" or "raw" API. +* higher-level "sequential" API. +* BSD-style socket API. + +The raw API (sometimes called native API) is an event-driven API designed +to be used without an operating system that implements zero-copy send and +receive. This API is also used by the core stack for interaction between +the various protocols. It is the only API available when running lwIP +without an operating system. + +The sequential API provides a way for ordinary, sequential, programs +to use the lwIP stack. It is quite similar to the BSD socket API. The +model of execution is based on the blocking open-read-write-close +paradigm. Since the TCP/IP stack is event based by nature, the TCP/IP +code and the application program must reside in different execution +contexts (threads). + +The socket API is a compatibility API for existing applications, +currently it is built on top of the sequential API. It is meant to +provide all functions needed to run socket API applications running +on other platforms (e.g. unix / windows etc.). However, due to limitations +in the specification of this API, there might be incompatibilities +that require small modifications of existing programs. + +** Multithreading + +lwIP started targeting single-threaded environments. When adding multi- +threading support, instead of making the core thread-safe, another +approach was chosen: there is one main thread running the lwIP core +(also known as the "tcpip_thread"). When running in a multithreaded +environment, raw API functions MUST only be called from the core thread +since raw API functions are not protected from concurrent access (aside +from pbuf- and memory management functions). Application threads using +the sequential- or socket API communicate with this main thread through +message passing. + + As such, the list of functions that may be called from + other threads or an ISR is very limited! Only functions + from these API header files are thread-safe: + - api.h + - netbuf.h + - netdb.h + - netifapi.h + - pppapi.h + - sockets.h + - sys.h + + Additionaly, memory (de-)allocation functions may be + called from multiple threads (not ISR!) with NO_SYS=0 + since they are protected by SYS_LIGHTWEIGHT_PROT and/or + semaphores. + + Netconn or Socket API functions are thread safe against the + core thread but they are not reentrant at the control block + granularity level. That is, a UDP or TCP control block must + not be shared among multiple threads without proper locking. + + If SYS_LIGHTWEIGHT_PROT is set to 1 and + LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT is set to 1, + pbuf_free() may also be called from another thread or + an ISR (since only then, mem_free - for PBUF_RAM - may + be called from an ISR: otherwise, the HEAP is only + protected by semaphores). + + +** The remainder of this document discusses the "raw" API. ** + +The raw TCP/IP interface allows the application program to integrate +better with the TCP/IP code. Program execution is event based by +having callback functions being called from within the TCP/IP +code. The TCP/IP code and the application program both run in the same +thread. The sequential API has a much higher overhead and is not very +well suited for small systems since it forces a multithreaded paradigm +on the application. + +The raw TCP/IP interface is not only faster in terms of code execution +time but is also less memory intensive. The drawback is that program +development is somewhat harder and application programs written for +the raw TCP/IP interface are more difficult to understand. Still, this +is the preferred way of writing applications that should be small in +code size and memory usage. + +All APIs can be used simultaneously by different application +programs. In fact, the sequential API is implemented as an application +program using the raw TCP/IP interface. + +Do not confuse the lwIP raw API with raw Ethernet or IP sockets. +The former is a way of interfacing the lwIP network stack (including +TCP and UDP), the later refers to processing raw Ethernet or IP data +instead of TCP connections or UDP packets. + +Raw API applications may never block since all packet processing +(input and output) as well as timer processing (TCP mainly) is done +in a single execution context. + +--- Callbacks + +Program execution is driven by callbacks functions, which are then +invoked by the lwIP core when activity related to that application +occurs. A particular application may register to be notified via a +callback function for events such as incoming data available, outgoing +data sent, error notifications, poll timer expiration, connection +closed, etc. An application can provide a callback function to perform +processing for any or all of these events. Each callback is an ordinary +C function that is called from within the TCP/IP code. Every callback +function is passed the current TCP or UDP connection state as an +argument. Also, in order to be able to keep program specific state, +the callback functions are called with a program specified argument +that is independent of the TCP/IP state. + +The function for setting the application connection state is: + +- void tcp_arg(struct tcp_pcb *pcb, void *arg) + + Specifies the program specific state that should be passed to all + other callback functions. The "pcb" argument is the current TCP + connection control block, and the "arg" argument is the argument + that will be passed to the callbacks. + + +--- TCP connection setup + +The functions used for setting up connections is similar to that of +the sequential API and of the BSD socket API. A new TCP connection +identifier (i.e., a protocol control block - PCB) is created with the +tcp_new() function. This PCB can then be either set to listen for new +incoming connections or be explicitly connected to another host. + +- struct tcp_pcb *tcp_new(void) + + Creates a new connection identifier (PCB). If memory is not + available for creating the new pcb, NULL is returned. + +- err_t tcp_bind(struct tcp_pcb *pcb, ip_addr_t *ipaddr, + u16_t port) + + Binds the pcb to a local IP address and port number. The IP address + can be specified as IP_ADDR_ANY in order to bind the connection to + all local IP addresses. + + If another connection is bound to the same port, the function will + return ERR_USE, otherwise ERR_OK is returned. + +- struct tcp_pcb *tcp_listen(struct tcp_pcb *pcb) + + Commands a pcb to start listening for incoming connections. When an + incoming connection is accepted, the function specified with the + tcp_accept() function will be called. The pcb will have to be bound + to a local port with the tcp_bind() function. + + The tcp_listen() function returns a new connection identifier, and + the one passed as an argument to the function will be + deallocated. The reason for this behavior is that less memory is + needed for a connection that is listening, so tcp_listen() will + reclaim the memory needed for the original connection and allocate a + new smaller memory block for the listening connection. + + tcp_listen() may return NULL if no memory was available for the + listening connection. If so, the memory associated with the pcb + passed as an argument to tcp_listen() will not be deallocated. + +- struct tcp_pcb *tcp_listen_with_backlog(struct tcp_pcb *pcb, u8_t backlog) + + Same as tcp_listen, but limits the number of outstanding connections + in the listen queue to the value specified by the backlog argument. + To use it, your need to set TCP_LISTEN_BACKLOG=1 in your lwipopts.h. + +- void tcp_accept(struct tcp_pcb *pcb, + err_t (* accept)(void *arg, struct tcp_pcb *newpcb, + err_t err)) + + Specified the callback function that should be called when a new + connection arrives on a listening connection. + +- err_t tcp_connect(struct tcp_pcb *pcb, ip_addr_t *ipaddr, + u16_t port, err_t (* connected)(void *arg, + struct tcp_pcb *tpcb, + err_t err)); + + Sets up the pcb to connect to the remote host and sends the + initial SYN segment which opens the connection. + + The tcp_connect() function returns immediately; it does not wait for + the connection to be properly setup. Instead, it will call the + function specified as the fourth argument (the "connected" argument) + when the connection is established. If the connection could not be + properly established, either because the other host refused the + connection or because the other host didn't answer, the "err" + callback function of this pcb (registered with tcp_err, see below) + will be called. + + The tcp_connect() function can return ERR_MEM if no memory is + available for enqueueing the SYN segment. If the SYN indeed was + enqueued successfully, the tcp_connect() function returns ERR_OK. + + +--- Sending TCP data + +TCP data is sent by enqueueing the data with a call to +tcp_write(). When the data is successfully transmitted to the remote +host, the application will be notified with a call to a specified +callback function. + +- err_t tcp_write(struct tcp_pcb *pcb, const void *dataptr, u16_t len, + u8_t apiflags) + + Enqueues the data pointed to by the argument dataptr. The length of + the data is passed as the len parameter. The apiflags can be one or more of: + - TCP_WRITE_FLAG_COPY: indicates whether the new memory should be allocated + for the data to be copied into. If this flag is not given, no new memory + should be allocated and the data should only be referenced by pointer. This + also means that the memory behind dataptr must not change until the data is + ACKed by the remote host + - TCP_WRITE_FLAG_MORE: indicates that more data follows. If this is omitted, + the PSH flag is set in the last segment created by this call to tcp_write. + If this flag is given, the PSH flag is not set. + + The tcp_write() function will fail and return ERR_MEM if the length + of the data exceeds the current send buffer size or if the length of + the queue of outgoing segment is larger than the upper limit defined + in lwipopts.h. The number of bytes available in the output queue can + be retrieved with the tcp_sndbuf() function. + + The proper way to use this function is to call the function with at + most tcp_sndbuf() bytes of data. If the function returns ERR_MEM, + the application should wait until some of the currently enqueued + data has been successfully received by the other host and try again. + +- void tcp_sent(struct tcp_pcb *pcb, + err_t (* sent)(void *arg, struct tcp_pcb *tpcb, + u16_t len)) + + Specifies the callback function that should be called when data has + successfully been received (i.e., acknowledged) by the remote + host. The len argument passed to the callback function gives the + amount bytes that was acknowledged by the last acknowledgment. + + +--- Receiving TCP data + +TCP data reception is callback based - an application specified +callback function is called when new data arrives. When the +application has taken the data, it has to call the tcp_recved() +function to indicate that TCP can advertise increase the receive +window. + +- void tcp_recv(struct tcp_pcb *pcb, + err_t (* recv)(void *arg, struct tcp_pcb *tpcb, + struct pbuf *p, err_t err)) + + Sets the callback function that will be called when new data + arrives. The callback function will be passed a NULL pbuf to + indicate that the remote host has closed the connection. If + there are no errors and the callback function is to return + ERR_OK, then it must free the pbuf. Otherwise, it must not + free the pbuf so that lwIP core code can store it. + +- void tcp_recved(struct tcp_pcb *pcb, u16_t len) + + Must be called when the application has received the data. The len + argument indicates the length of the received data. + + +--- Application polling + +When a connection is idle (i.e., no data is either transmitted or +received), lwIP will repeatedly poll the application by calling a +specified callback function. This can be used either as a watchdog +timer for killing connections that have stayed idle for too long, or +as a method of waiting for memory to become available. For instance, +if a call to tcp_write() has failed because memory wasn't available, +the application may use the polling functionality to call tcp_write() +again when the connection has been idle for a while. + +- void tcp_poll(struct tcp_pcb *pcb, + err_t (* poll)(void *arg, struct tcp_pcb *tpcb), + u8_t interval) + + Specifies the polling interval and the callback function that should + be called to poll the application. The interval is specified in + number of TCP coarse grained timer shots, which typically occurs + twice a second. An interval of 10 means that the application would + be polled every 5 seconds. + + +--- Closing and aborting connections + +- err_t tcp_close(struct tcp_pcb *pcb) + + Closes the connection. The function may return ERR_MEM if no memory + was available for closing the connection. If so, the application + should wait and try again either by using the acknowledgment + callback or the polling functionality. If the close succeeds, the + function returns ERR_OK. + + The pcb is deallocated by the TCP code after a call to tcp_close(). + +- void tcp_abort(struct tcp_pcb *pcb) + + Aborts the connection by sending a RST (reset) segment to the remote + host. The pcb is deallocated. This function never fails. + + ATTENTION: When calling this from one of the TCP callbacks, make + sure you always return ERR_ABRT (and never return ERR_ABRT otherwise + or you will risk accessing deallocated memory or memory leaks! + + +If a connection is aborted because of an error, the application is +alerted of this event by the err callback. Errors that might abort a +connection are when there is a shortage of memory. The callback +function to be called is set using the tcp_err() function. + +- void tcp_err(struct tcp_pcb *pcb, void (* err)(void *arg, + err_t err)) + + The error callback function does not get the pcb passed to it as a + parameter since the pcb may already have been deallocated. + + +--- UDP interface + +The UDP interface is similar to that of TCP, but due to the lower +level of complexity of UDP, the interface is significantly simpler. + +- struct udp_pcb *udp_new(void) + + Creates a new UDP pcb which can be used for UDP communication. The + pcb is not active until it has either been bound to a local address + or connected to a remote address. + +- void udp_remove(struct udp_pcb *pcb) + + Removes and deallocates the pcb. + +- err_t udp_bind(struct udp_pcb *pcb, ip_addr_t *ipaddr, + u16_t port) + + Binds the pcb to a local address. The IP-address argument "ipaddr" + can be IP_ADDR_ANY to indicate that it should listen to any local IP + address. The function currently always return ERR_OK. + +- err_t udp_connect(struct udp_pcb *pcb, ip_addr_t *ipaddr, + u16_t port) + + Sets the remote end of the pcb. This function does not generate any + network traffic, but only set the remote address of the pcb. + +- err_t udp_disconnect(struct udp_pcb *pcb) + + Remove the remote end of the pcb. This function does not generate + any network traffic, but only removes the remote address of the pcb. + +- err_t udp_send(struct udp_pcb *pcb, struct pbuf *p) + + Sends the pbuf p. The pbuf is not deallocated. + +- void udp_recv(struct udp_pcb *pcb, + void (* recv)(void *arg, struct udp_pcb *upcb, + struct pbuf *p, + ip_addr_t *addr, + u16_t port), + void *recv_arg) + + Specifies a callback function that should be called when a UDP + datagram is received. + + +--- System initalization + +A truly complete and generic sequence for initializing the lwIP stack +cannot be given because it depends on additional initializations for +your runtime environment (e.g. timers). + +We can give you some idea on how to proceed when using the raw API. +We assume a configuration using a single Ethernet netif and the +UDP and TCP transport layers, IPv4 and the DHCP client. + +Call these functions in the order of appearance: + +- lwip_init() + + Initialize the lwIP stack and all of its subsystems. + +- netif_add(struct netif *netif, const ip4_addr_t *ipaddr, + const ip4_addr_t *netmask, const ip4_addr_t *gw, + void *state, netif_init_fn init, netif_input_fn input) + + Adds your network interface to the netif_list. Allocate a struct + netif and pass a pointer to this structure as the first argument. + Give pointers to cleared ip_addr structures when using DHCP, + or fill them with sane numbers otherwise. The state pointer may be NULL. + + The init function pointer must point to a initialization function for + your Ethernet netif interface. The following code illustrates its use. + + err_t netif_if_init(struct netif *netif) + { + u8_t i; + + for (i = 0; i < ETHARP_HWADDR_LEN; i++) { + netif->hwaddr[i] = some_eth_addr[i]; + } + init_my_eth_device(); + return ERR_OK; + } + + For Ethernet drivers, the input function pointer must point to the lwIP + function ethernet_input() declared in "netif/etharp.h". Other drivers + must use ip_input() declared in "lwip/ip.h". + +- netif_set_default(struct netif *netif) + + Registers the default network interface. + +- netif_set_link_up(struct netif *netif) + + This is the hardware link state; e.g. whether cable is plugged for wired + Ethernet interface. This function must be called even if you don't know + the current state. Having link up and link down events is optional but + DHCP and IPv6 discover benefit well from those events. + +- netif_set_up(struct netif *netif) + + This is the administrative (= software) state of the netif, when the + netif is fully configured this function must be called. + +- dhcp_start(struct netif *netif) + + Creates a new DHCP client for this interface on the first call. + + You can peek in the netif->dhcp struct for the actual DHCP status. + +- sys_check_timeouts() + + When the system is running, you have to periodically call + sys_check_timeouts() which will handle all timers for all protocols in + the stack; add this to your main loop or equivalent. + + +--- Optimalization hints + +The first thing you want to optimize is the lwip_standard_checksum() +routine from src/core/inet.c. You can override this standard +function with the #define LWIP_CHKSUM <your_checksum_routine>. + +There are C examples given in inet.c or you might want to +craft an assembly function for this. RFC1071 is a good +introduction to this subject. + +Other significant improvements can be made by supplying +assembly or inline replacements for htons() and htonl() +if you're using a little-endian architecture. +#define lwip_htons(x) <your_htons> +#define lwip_htonl(x) <your_htonl> +If you #define them to htons() and htonl(), you should +#define LWIP_DONT_PROVIDE_BYTEORDER_FUNCTIONS to prevent lwIP from +defining hton*/ntoh* compatibility macros. + +Check your network interface driver if it reads at +a higher speed than the maximum wire-speed. If the +hardware isn't serviced frequently and fast enough +buffer overflows are likely to occur. + +E.g. when using the cs8900 driver, call cs8900if_service(ethif) +as frequently as possible. When using an RTOS let the cs8900 interrupt +wake a high priority task that services your driver using a binary +semaphore or event flag. Some drivers might allow additional tuning +to match your application and network. + +For a production release it is recommended to set LWIP_STATS to 0. +Note that speed performance isn't influenced much by simply setting +high values to the memory options. + +For more optimization hints take a look at the lwIP wiki. + +--- Zero-copy MACs + +To achieve zero-copy on transmit, the data passed to the raw API must +remain unchanged until sent. Because the send- (or write-)functions return +when the packets have been enqueued for sending, data must be kept stable +after that, too. + +This implies that PBUF_RAM/PBUF_POOL pbufs passed to raw-API send functions +must *not* be reused by the application unless their ref-count is 1. + +For no-copy pbufs (PBUF_ROM/PBUF_REF), data must be kept unchanged, too, +but the stack/driver will/must copy PBUF_REF'ed data when enqueueing, while +PBUF_ROM-pbufs are just enqueued (as ROM-data is expected to never change). + +Also, data passed to tcp_write without the copy-flag must not be changed! + +Therefore, be careful which type of PBUF you use and if you copy TCP data +or not! diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/savannah.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/savannah.txt new file mode 100644 index 0000000..d7d19eb --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/savannah.txt @@ -0,0 +1,120 @@ +Daily Use Guide for using Savannah for lwIP + +Table of Contents: + +1 - Obtaining lwIP from the Git repository +2 - Committers/developers Git access using SSH +3 - Merging a development branch to master branch +4 - How to release lwIP + + + +1 Obtaining lwIP from the Git repository +---------------------------------------- + +To perform an anonymous Git clone of the master branch (this is where +bug fixes and incremental enhancements occur), do this: + git clone git://git.savannah.nongnu.org/lwip.git + +Or, obtain a stable branch (updated with bug fixes only) as follows: + git clone --branch DEVEL-1_4_1 git://git.savannah.nongnu.org/lwip.git + +Or, obtain a specific (fixed) release as follows: + git clone --branch STABLE-1_4_1 git://git.savannah.nongnu.org/lwip.git + + +2 Committers/developers Git access using SSH +-------------------------------------------- + +The Savannah server uses SSH (Secure Shell) protocol 2 authentication and encryption. +As such, Git commits to the server occur through a SSH tunnel for project members. +To create a SSH2 key pair in UNIX-like environments, do this: + ssh-keygen -t dsa + +Under Windows, a recommended SSH client is "PuTTY", freely available with good +documentation and a graphic user interface. Use its key generator. + +Now paste the id_dsa.pub contents into your Savannah account public key list. Wait +a while so that Savannah can update its configuration (This can take minutes). + +Try to login using SSH: + ssh -v your_login@git.sv.gnu.org + +If it tells you: + Linux vcs.savannah.gnu.org 2.6.32-5-xen-686 #1 SMP Wed Jun 17 17:10:03 UTC 2015 i686 + + Interactive shell login is not possible for security reasons. + VCS commands are allowed. + Last login: Tue May 15 23:10:12 2012 from 82.245.102.129 + You tried to execute: + Sorry, you are not allowed to execute that command. + Shared connection to git.sv.gnu.org closed. + +then you could login; Savannah refuses to give you a shell - which is OK, as we +are allowed to use SSH for Git only. Now, you should be able to do this: + git clone your_login@git.sv.gnu.org:/srv/git/lwip.git + +After which you can edit your local files with bug fixes or new features and +commit them. Make sure you know what you are doing when using Git to make +changes on the repository. If in doubt, ask on the lwip-members mailing list. + +(If SSH asks about authenticity of the host, you can check the key +fingerprint against https://savannah.nongnu.org/git/?group=lwip + + +3 - Merging a development branch to master branch +------------------------------------------------- + +Merging is a straightforward process in Git. How to merge all changes in a +development branch since our last merge from main: + +Checkout the master branch: + git checkout master + +Merge the development branch to master: + git merge your-development-branch + +Resolve any conflict. + +Commit the merge result. + git commit -a + +Push your commits: + git push + + +4 How to release lwIP +--------------------- + +First, tag the release using Git: (I use release number 1.4.1 throughout +this example). + git tag -a STABLE-1_4_1 + +Share the tag reference by pushing it to remote: + git push origin STABLE-1_4_1 + +Prepare the release: + cp -r lwip lwip-1.4.1 + rm -rf lwip-1.4.1/.git lwip-1.4.1/.gitattributes + +Archive the current directory using tar, gzip'd, bzip2'd and zip'd. + tar czvf lwip-1.4.1.tar.gz lwip-1.4.1 + tar cjvf lwip-1.4.1.tar.bz2 lwip-1.4.1 + zip -r lwip-1.4.1.zip lwip-1.4.1 + +Now, sign the archives with a detached GPG binary signature as follows: + gpg -b lwip-1.4.1.tar.gz + gpg -b lwip-1.4.1.tar.bz2 + gpg -b lwip-1.4.1.zip + +Upload these files using anonymous FTP: + ncftp ftp://savannah.gnu.org/incoming/savannah/lwip + ncftp> mput *1.4.1.* + +Additionally, you may post a news item on Savannah, like this: + +A new 1.4.1 release is now available here: +http://savannah.nongnu.org/files/?group=lwip&highlight=1.4.1 + +You will have to submit this via the user News interface, then approve +this via the Administrator News interface. diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/snmp_agent.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/snmp_agent.txt new file mode 100644 index 0000000..2653230 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/snmp_agent.txt @@ -0,0 +1,181 @@ +SNMPv1 agent for lwIP + +Author: Christiaan Simons + +This is a brief introduction how to use and configure the SNMP agent. +Note the agent uses the raw-API UDP interface so you may also want to +read rawapi.txt to gain a better understanding of the SNMP message handling. + +0 Agent Capabilities +==================== + +SNMPv1 per RFC1157 + This is an old(er) standard but is still widely supported. + For SNMPv2c and v3 have a greater complexity and need many + more lines of code. IMHO this breaks the idea of "lightweight IP". + + Note the S in SNMP stands for "Simple". Note that "Simple" is + relative. SNMP is simple compared to the complex ISO network + management protocols CMIP (Common Management Information Protocol) + and CMOT (CMip Over Tcp). + +MIB II per RFC1213 + The standard lwIP stack management information base. + This is a required MIB, so this is always enabled. + When builing lwIP without TCP, the mib-2.tcp group is omitted. + The groups EGP, CMOT and transmission are disabled by default. + + Most mib-2 objects are not writable except: + sysName, sysLocation, sysContact, snmpEnableAuthenTraps. + Writing to or changing the ARP and IP address and route + tables is not possible. + + Note lwIP has a very limited notion of IP routing. It currently + doen't have a route table and doesn't have a notion of the U,G,H flags. + Instead lwIP uses the interface list with only one default interface + acting as a single gateway interface (G) for the default route. + + The agent returns a "virtual table" with the default route 0.0.0.0 + for the default interface and network routes (no H) for each + network interface in the netif_list. + All routes are considered to be up (U). + +Loading additional MIBs + MIBs can only be added in compile-time, not in run-time. + There is no MIB compiler thus additional MIBs must be hand coded. + +Large SNMP message support + The packet decoding and encoding routines are designed + to use pbuf-chains. Larger payloads than the minimum + SNMP requirement of 484 octets are supported if the + PBUF_POOL_SIZE and IP_REASS_BUFSIZE are set to match your + local requirement. + +1 Building the Agent +==================== + +First of all you'll need to add the following define +to your local lwipopts.h: + +#define LWIP_SNMP 1 + +and add the source files in lwip/src/core/snmp +and some snmp headers in lwip/src/include/lwip to your makefile. + +Note you'll might need to adapt you network driver to update +the mib2 variables for your interface. + +2 Running the Agent +=================== + +The following function calls must be made in your program to +actually get the SNMP agent running. + +Before starting the agent you should supply pointers +to non-volatile memory for sysContact, sysLocation, +and snmpEnableAuthenTraps. You can do this by calling + +snmp_set_syscontact() +snmp_set_syslocation() +snmp_set_snmpenableauthentraps() + +Additionally you may want to set + +snmp_set_sysdescr() +snmp_set_sysobjid() (if you have a private MIB) +snmp_set_sysname() + +Also before starting the agent you need to setup +one or more trap destinations using these calls: + +snmp_trap_dst_enable(); +snmp_trap_dst_ip_set(); + +In the lwIP initialisation sequence call snmp_init() just after +the call to udp_init(). + +Exactly every 10 msec the SNMP uptime timestamp must be updated with +snmp_inc_sysuptime(). You should call this from a timer interrupt +or a timer signal handler depending on your runtime environment. + +An alternative way to update the SNMP uptime timestamp is to do a call like +snmp_add_sysuptime(100) each 1000ms (which is bigger "step", but call to +a lower frequency). Another one is to not call snmp_inc_sysuptime() or +snmp_add_sysuptime(), and to define the SNMP_GET_SYSUPTIME(sysuptime) macro. +This one is undefined by default in mib2.c. SNMP_GET_SYSUPTIME is called inside +snmp_get_sysuptime(u32_t *value), and enable to change "sysuptime" value only +when it's queried (any function which need "sysuptime" have to call +snmp_get_sysuptime). + + +3 Private MIBs +============== + +If want to extend the agent with your own private MIB you'll need to +add the following define to your local lwipopts.h: + +#define SNMP_PRIVATE_MIB 1 + +You must provide the private_mib.h and associated files yourself. +Note we don't have a "MIB compiler" that generates C source from a MIB, +so you're required to do some serious coding if you enable this! + +Note the lwIP enterprise ID (26381) is assigned to the lwIP project, +ALL OBJECT IDENTIFIERS LIVING UNDER THIS ID ARE ASSIGNED BY THE lwIP +MAINTAINERS! + +If you need to create your own private MIB you'll need +to apply for your own enterprise ID with IANA: http://www.iana.org/numbers.html + +You can set it by passing a struct snmp_obj_id to the agent +using snmp_set_sysobjid(&my_object_id), just before snmp_init(). + +Note the object identifiers for thes MIB-2 and your private MIB +tree must be kept in sorted ascending (lexicographical) order. +This to ensure correct getnext operation. + +An example for a private MIB is part of the "minimal Unix" project: +contrib/ports/unix/proj/minimal/lwip_prvmib.c + +The next chapter gives a more detailed description of the +MIB-2 tree and the optional private MIB. + +4 The Gory Details +================== + +4.0 Object identifiers and the MIB tree. + +We have three distinct parts for all object identifiers: + +The prefix + .iso.org.dod.internet + +the middle part + .mgmt.mib-2.ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress + +and the index part + .1.192.168.0.1 + +Objects located above the .internet hierarchy aren't supported. +Currently only the .mgmt sub-tree is available and +when the SNMP_PRIVATE_MIB is enabled the .private tree +becomes available too. + +Object identifiers from incoming requests are checked +for a matching prefix, middle part and index part +or are expanded(*) for GetNext requests with short +or inexisting names in the request. +(* we call this "expansion" but this also +resembles the "auto-completion" operation) + +The middle part is usually located in ROM (const) +to preserve precious RAM on small microcontrollers. +However RAM location is possible for a dynamically +changing private tree. + +The index part is handled by functions which in +turn use dynamically allocated index trees from RAM. +These trees are updated by e.g. the etharp code +when new entries are made or removed form the ARP cache. + +/** @todo more gory details */ diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/sys_arch.txt b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/sys_arch.txt new file mode 100644 index 0000000..4dc727b --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/lwip/doc/sys_arch.txt @@ -0,0 +1,303 @@ +sys_arch interface for lwIP + +Author: Adam Dunkels + Simon Goldschmidt + +The operating system emulation layer provides a common interface +between the lwIP code and the underlying operating system kernel. The +general idea is that porting lwIP to new architectures requires only +small changes to a few header files and a new sys_arch +implementation. It is also possible to do a sys_arch implementation +that does not rely on any underlying operating system. + +The sys_arch provides semaphores, mailboxes and mutexes to lwIP. For the full +lwIP functionality, multiple threads support can be implemented in the +sys_arch, but this is not required for the basic lwIP +functionality. Timer scheduling is implemented in lwIP, but can be implemented +by the sys_arch port (LWIP_TIMERS_CUSTOM==1). + +In addition to the source file providing the functionality of sys_arch, +the OS emulation layer must provide several header files defining +macros used throughout lwip. The files required and the macros they +must define are listed below the sys_arch description. + +Semaphores can be either counting or binary - lwIP works with both +kinds. Mailboxes should be implemented as a queue which allows multiple messages +to be posted (implementing as a rendez-vous point where only one message can be +posted at a time can have a highly negative impact on performance). A message +in a mailbox is just a pointer, nothing more. + +Semaphores are represented by the type "sys_sem_t" which is typedef'd +in the sys_arch.h file. Mailboxes are equivalently represented by the +type "sys_mbox_t". Mutexes are represented by the type "sys_mutex_t". +lwIP does not place any restrictions on how these types are represented +internally. + +Since lwIP 1.4.0, semaphore, mutexes and mailbox functions are prototyped in a way that +allows both using pointers or actual OS structures to be used. This way, memory +required for such types can be either allocated in place (globally or on the +stack) or on the heap (allocated internally in the "*_new()" functions). + +The following functions must be implemented by the sys_arch: + +- void sys_init(void) + + Is called to initialize the sys_arch layer. + +- err_t sys_sem_new(sys_sem_t *sem, u8_t count) + + Creates a new semaphore. The semaphore is allocated to the memory that 'sem' + points to (which can be both a pointer or the actual OS structure). + The "count" argument specifies the initial state of the semaphore (which is + either 0 or 1). + If the semaphore has been created, ERR_OK should be returned. Returning any + other error will provide a hint what went wrong, but except for assertions, + no real error handling is implemented. + +- void sys_sem_free(sys_sem_t *sem) + + Deallocates a semaphore. + +- void sys_sem_signal(sys_sem_t *sem) + + Signals a semaphore. + +- u32_t sys_arch_sem_wait(sys_sem_t *sem, u32_t timeout) + + Blocks the thread while waiting for the semaphore to be + signaled. If the "timeout" argument is non-zero, the thread should + only be blocked for the specified time (measured in + milliseconds). If the "timeout" argument is zero, the thread should be + blocked until the semaphore is signalled. + + If the timeout argument is non-zero, the return value is the number of + milliseconds spent waiting for the semaphore to be signaled. If the + semaphore wasn't signaled within the specified time, the return value is + SYS_ARCH_TIMEOUT. If the thread didn't have to wait for the semaphore + (i.e., it was already signaled), the function may return zero. + + Notice that lwIP implements a function with a similar name, + sys_sem_wait(), that uses the sys_arch_sem_wait() function. + +- int sys_sem_valid(sys_sem_t *sem) + + Returns 1 if the semaphore is valid, 0 if it is not valid. + When using pointers, a simple way is to check the pointer for != NULL. + When directly using OS structures, implementing this may be more complex. + This may also be a define, in which case the function is not prototyped. + +- void sys_sem_set_invalid(sys_sem_t *sem) + + Invalidate a semaphore so that sys_sem_valid() returns 0. + ATTENTION: This does NOT mean that the semaphore shall be deallocated: + sys_sem_free() is always called before calling this function! + This may also be a define, in which case the function is not prototyped. + +- void sys_mutex_new(sys_mutex_t *mutex) + + Creates a new mutex. The mutex is allocated to the memory that 'mutex' + points to (which can be both a pointer or the actual OS structure). + If the mutex has been created, ERR_OK should be returned. Returning any + other error will provide a hint what went wrong, but except for assertions, + no real error handling is implemented. + +- void sys_mutex_free(sys_mutex_t *mutex) + + Deallocates a mutex. + +- void sys_mutex_lock(sys_mutex_t *mutex) + + Blocks the thread until the mutex can be grabbed. + +- void sys_mutex_unlock(sys_mutex_t *mutex) + + Releases the mutex previously locked through 'sys_mutex_lock()'. + +- void sys_mutex_valid(sys_mutex_t *mutex) + + Returns 1 if the mutes is valid, 0 if it is not valid. + When using pointers, a simple way is to check the pointer for != NULL. + When directly using OS structures, implementing this may be more complex. + This may also be a define, in which case the function is not prototyped. + +- void sys_mutex_set_invalid(sys_mutex_t *mutex) + + Invalidate a mutex so that sys_mutex_valid() returns 0. + ATTENTION: This does NOT mean that the mutex shall be deallocated: + sys_mutex_free() is always called before calling this function! + This may also be a define, in which case the function is not prototyped. + +- err_t sys_mbox_new(sys_mbox_t *mbox, int size) + + Creates an empty mailbox for maximum "size" elements. Elements stored + in mailboxes are pointers. You have to define macros "_MBOX_SIZE" + in your lwipopts.h, or ignore this parameter in your implementation + and use a default size. + If the mailbox has been created, ERR_OK should be returned. Returning any + other error will provide a hint what went wrong, but except for assertions, + no real error handling is implemented. + +- void sys_mbox_free(sys_mbox_t *mbox) + + Deallocates a mailbox. If there are messages still present in the + mailbox when the mailbox is deallocated, it is an indication of a + programming error in lwIP and the developer should be notified. + +- void sys_mbox_post(sys_mbox_t *mbox, void *msg) + + Posts the "msg" to the mailbox. This function have to block until + the "msg" is really posted. + +- err_t sys_mbox_trypost(sys_mbox_t *mbox, void *msg) + + Try to post the "msg" to the mailbox. Returns ERR_MEM if this one + is full, else, ERR_OK if the "msg" is posted. + +- u32_t sys_arch_mbox_fetch(sys_mbox_t *mbox, void **msg, u32_t timeout) + + Blocks the thread until a message arrives in the mailbox, but does + not block the thread longer than "timeout" milliseconds (similar to + the sys_arch_sem_wait() function). If "timeout" is 0, the thread should + be blocked until a message arrives. The "msg" argument is a result + parameter that is set by the function (i.e., by doing "*msg = + ptr"). The "msg" parameter maybe NULL to indicate that the message + should be dropped. + + The return values are the same as for the sys_arch_sem_wait() function: + Number of milliseconds spent waiting or SYS_ARCH_TIMEOUT if there was a + timeout. + + Note that a function with a similar name, sys_mbox_fetch(), is + implemented by lwIP. + +- u32_t sys_arch_mbox_tryfetch(sys_mbox_t *mbox, void **msg) + + This is similar to sys_arch_mbox_fetch, however if a message is not + present in the mailbox, it immediately returns with the code + SYS_MBOX_EMPTY. On success 0 is returned. + + To allow for efficient implementations, this can be defined as a + function-like macro in sys_arch.h instead of a normal function. For + example, a naive implementation could be: + #define sys_arch_mbox_tryfetch(mbox,msg) \ + sys_arch_mbox_fetch(mbox,msg,1) + although this would introduce unnecessary delays. + +- int sys_mbox_valid(sys_mbox_t *mbox) + + Returns 1 if the mailbox is valid, 0 if it is not valid. + When using pointers, a simple way is to check the pointer for != NULL. + When directly using OS structures, implementing this may be more complex. + This may also be a define, in which case the function is not prototyped. + +- void sys_mbox_set_invalid(sys_mbox_t *mbox) + + Invalidate a mailbox so that sys_mbox_valid() returns 0. + ATTENTION: This does NOT mean that the mailbox shall be deallocated: + sys_mbox_free() is always called before calling this function! + This may also be a define, in which case the function is not prototyped. + +If threads are supported by the underlying operating system and if +such functionality is needed in lwIP, the following function will have +to be implemented as well: + +- sys_thread_t sys_thread_new(char *name, void (* thread)(void *arg), void *arg, int stacksize, int prio) + + Starts a new thread named "name" with priority "prio" that will begin its + execution in the function "thread()". The "arg" argument will be passed as an + argument to the thread() function. The stack size to used for this thread is + the "stacksize" parameter. The id of the new thread is returned. Both the id + and the priority are system dependent. + +When lwIP is used from more than one context (e.g. from multiple threads OR from +main-loop and from interrupts), the SYS_LIGHTWEIGHT_PROT protection SHOULD be enabled! + +- sys_prot_t sys_arch_protect(void) + + This optional function does a "fast" critical region protection and returns + the previous protection level. This function is only called during very short + critical regions. An embedded system which supports ISR-based drivers might + want to implement this function by disabling interrupts. Task-based systems + might want to implement this by using a mutex or disabling tasking. This + function should support recursive calls from the same task or interrupt. In + other words, sys_arch_protect() could be called while already protected. In + that case the return value indicates that it is already protected. + + sys_arch_protect() is only required if your port is supporting an operating + system. + +- void sys_arch_unprotect(sys_prot_t pval) + + This optional function does a "fast" set of critical region protection to the + value specified by pval. See the documentation for sys_arch_protect() for + more information. This function is only required if your port is supporting + an operating system. + +For some configurations, you also need: + +- u32_t sys_now(void) + + This optional function returns the current time in milliseconds (don't care + for wraparound, this is only used for time diffs). + Not implementing this function means you cannot use some modules (e.g. TCP + timestamps, internal timeouts for NO_SYS==1). + + +Note: + +Be careful with using mem_malloc() in sys_arch. When malloc() refers to +mem_malloc() you can run into a circular function call problem. In mem.c +mem_init() tries to allcate a semaphore using mem_malloc, which of course +can't be performed when sys_arch uses mem_malloc. + +------------------------------------------------------------------------------- +Additional files required for the "OS support" emulation layer: +------------------------------------------------------------------------------- + +cc.h - Architecture environment, some compiler specific, some + environment specific (probably should move env stuff + to sys_arch.h.) + + Typedefs for the types used by lwip - + u8_t, s8_t, u16_t, s16_t, u32_t, s32_t, mem_ptr_t + + Compiler hints for packing lwip's structures - + PACK_STRUCT_FIELD(x) + PACK_STRUCT_STRUCT + PACK_STRUCT_BEGIN + PACK_STRUCT_END + + Platform specific diagnostic output - + LWIP_PLATFORM_DIAG(x) - non-fatal, print a message. + LWIP_PLATFORM_ASSERT(x) - fatal, print message and abandon execution. + Portability defines for printf formatters: + U16_F, S16_F, X16_F, U32_F, S32_F, X32_F, SZT_F + + "lightweight" synchronization mechanisms - + SYS_ARCH_DECL_PROTECT(x) - declare a protection state variable. + SYS_ARCH_PROTECT(x) - enter protection mode. + SYS_ARCH_UNPROTECT(x) - leave protection mode. + + If the compiler does not provide memset() this file must include a + definition of it, or include a file which defines it. + + This file must either include a system-local <errno.h> which defines + the standard *nix error codes, or it should #define LWIP_PROVIDE_ERRNO + to make lwip/arch.h define the codes which are used throughout. + + +perf.h - Architecture specific performance measurement. + Measurement calls made throughout lwip, these can be defined to nothing. + PERF_START - start measuring something. + PERF_STOP(x) - stop measuring something, and record the result. + +sys_arch.h - Tied to sys_arch.c + + Arch dependent types for the following objects: + sys_sem_t, sys_mbox_t, sys_thread_t, + And, optionally: + sys_prot_t + + Defines to set vars of sys_mbox_t and sys_sem_t to NULL. + SYS_MBOX_NULL NULL + SYS_SEM_NULL NULL |