diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/802_15_4/api/PHY/phy_pd_data.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/802_15_4/api/PHY/phy_pd_data.h | 187 |
1 files changed, 187 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/802_15_4/api/PHY/phy_pd_data.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/802_15_4/api/PHY/phy_pd_data.h new file mode 100644 index 0000000..1009dc2 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/802_15_4/api/PHY/phy_pd_data.h @@ -0,0 +1,187 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef PHY_PD_DATA_H_INCLUDED +#define PHY_PD_DATA_H_INCLUDED + + +#include <stdint.h> +#include <stdbool.h> +#include "sys_utils.h" +#include "sys_time.h" +#include "phy_common.h" +#include "mac_time.h" +#include "sys_queue.h" + +/** @file + * This file contains declarations of PHY Data transmission routines and necessary types. + * + * @defgroup phy_data PHY Data API + * @ingroup phy_15_4 + * @{ + * @brief Module to declare PHY Data API + * @details The PHY Data module declares the PHY Data transmission routines and necessary types according to + * the PHY specification. More specifically, PHY data request pd_data_req(), PHY data confirm + * pd_data_conf(), and PHY Data indication pd_data_ind() primitives are declared. + */ + +/**@brief PD-DATA.request parameters. + * + * @details See 6.2.1.1 PD-DATA.request. + * See Table 6 - PD-DATA.request parameters. + */ +typedef struct +{ + /** The set of octets forming the PSDU to be transmitted by the PHY entity. */ + uint8_t * psdu; + + /** The number of octets contained in the PSDU to be transmitted by the PHY entity. + Valid range: less or equal to @ref PHY_MAX_PACKET_SIZE. */ + uint8_t psdu_length; +} pd_data_req_t; + +/**@brief Private information which is passed with PD-DATA.confirm. + * Not covered by standard. + */ +typedef struct +{ + /** pending value to store pending bit value if frame was acknowledged. */ + bool pending; +} pd_data_conf_private_t; + +/**@brief PD-DATA.confirm parameters. + * + * @details See 6.2.1.2 PD-DATA.confirm. + * See Table 7 - PD-DATA.confirm parameters. + */ +typedef struct +{ + /** Service field. */ + pd_data_conf_private_t service; + + /** The result of the request to transmit a packet. + * Valid range: PHY_SUCCESS, PHY_RX_ON, PHY_TRX_OFF, PHY_BUSY_TX. + * See @ref phy_enum_t. + * + * When radio chip successfully transmits data, but cannot receive + * ACK in FAST_ACK mode, the result is PHY_TX_ON. + */ + phy_enum_t status; +} pd_data_conf_t; + +/**@brief Private information which is passed with PD-DATA.indication. + * Not covered by standard. + */ +typedef struct +{ + /** RSSI value, which corresponds to packet that caused this indication. */ + int8_t rssi; + + /** Buffer to store incoming frame. */ + uint8_t frame_buffer[PHY_MAX_PACKET_SIZE + PHY_MAX_HEADER_SIZE]; + + /** Timestamp of the moment when PHY header octet reception has been started. */ + mac_timestamp_t timestamp; + + /** This field allows storing instances of this structure in a queue. */ + sys_queue_item_t queue_item; +#ifdef CONFIG_PHY_CERT_CRC_HOOK + bool crc_status; +#endif +} pd_data_ind_private_t; + +/**@brief PD-DATA.indication parameters. + * + * @details See 6.2.1.3 PD-DATA.indication. + * See Table 8 - PD-DATA.indication parameters. + */ +typedef struct +{ + /** Service field. */ + pd_data_ind_private_t service; + + /** The set of octets forming the PSDU received by the PHY entity. */ + uint8_t * psdu; + + /** The number of octets contained in the PSDU received by the PHY entity. + Valid range: less or equal to @ref PHY_MAX_PACKET_SIZE. */ + uint8_t psdu_length; + + /** Link quality (LQI) value measured during reception of the PPDU (see 6.9.8). + Valid range: 0x00 - 0xFF. */ + uint8_t ppdu_link_quality; +} pd_data_ind_t; + +/**@brief PD-DATA.request primitive. + * + * @details The PD-DATA.request primitive requests the transfer of an MPDU (i.e., PSDU) + * from the MAC sublayer to the local PHY entity. + * See 6.2.1.1 PD-DATA.request. + * + * @param[in] req Pointer to PD-DATA.request parameters. See @ref pd_data_req_t. + */ +void pd_data_req(pd_data_req_t * req); + +/**@brief PD-DATA.confirm primitive. + * + * @details Callback function, implemented by the next higher layer, + * which handles the PD-DATA.confirm primitive. + * See 6.2.1.2 PD-DATA.confirm. + * + * @param[out] conf Pointer to PD-DATA.confirm parameters. See @ref pd_data_conf_t. + */ +void pd_data_conf(pd_data_conf_t * conf); + +/**@brief PD-DATA.indication primitive. + * + * @details The PD-DATA.indication primitive indicates the transfer of an MPDU (i.e., PSDU) + * from the PHY to the local MAC sublayer entity. + * See 6.2.1.3 PD-DATA.indication. + * This function must be implemented by the next higher layer. + * + * @param[out] ind Pointer to PD-DATA.indication parameters. See @ref pd_data_ind_t. + * Data are valid until next fully received packet. + */ +void pd_data_ind(pd_data_ind_t * ind); + +/** @} */ + +#endif // PHY_PD_DATA_H_INCLUDED |