diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c new file mode 100644 index 0000000..c3499cc --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bsc/simulator/ant_bsc_simulator.c @@ -0,0 +1,280 @@ +/** + * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "ant_bsc_simulator.h" +#include "ant_bsc_utils.h" +#include "app_util.h" + +#define ITERATION_ANT_CYCLES(DEVICE_TYPE) \ + (BSC_PERIOD_TICKS(DEVICE_TYPE, BSC_MSG_PERIOD_4Hz)) ///< period of calculation [1/32678 s], defined in ANT device profile + // use the same DEVICE TYPE as in profile definition +#define ITERATION_PERIOD(DEVICE_TYPE) \ + ((ITERATION_ANT_CYCLES(DEVICE_TYPE)) * 1024 / ANT_CLOCK_FREQUENCY) ///< integer part of calculation's period [1/1024 s] +#define ITERATION_FRACTION(DEVICE_TYPE) \ + ((ITERATION_ANT_CYCLES(DEVICE_TYPE)) * 1024 % ANT_CLOCK_FREQUENCY) ///< fractional part of calculation's period [1/32678 s] + +#define SPEED_SIM_MIN_VAL 0u ///< speed simulation minimum value [m/s] +#define SPEED_SIM_MAX_VAL 16u ///< speed simulation maximum value [m/s] +#define SPEED_SIM_INCREMENT 1u ///< speed simulation value increment [m/s] +#define CADENCE_SIM_MIN_VAL 70u ///< cadence simulation minimum value [rpm] +#define CADENCE_SIM_MAX_VAL 120u ///< cadence simulation maximum value [rpm] +#define CADENCE_SIM_INCREMENT 1u ///< cadence simulation value increment [rpm] +#define WHEEL_CIRCUMFERENCE 1766u ///< bike wheel circumference [mm] +#define MM_TO_METERS(MM_VAL) ((MM_VAL) / 1000u) +#define TWO_SEC_TO_TICKS 2048 ///< number of [1/1024s] ticks in 2 sec period +#define CUMULATIVE_TIME_UNIT 2 ///< cumulative time unit + +void ant_bsc_simulator_init(ant_bsc_simulator_t * p_simulator, + ant_bsc_simulator_cfg_t const * p_config, + bool auto_change) +{ + p_simulator->p_profile = p_config->p_profile; + p_simulator->_cb.auto_change = auto_change; + p_simulator->_cb.speed_sim_val = SPEED_SIM_MIN_VAL; + p_simulator->_cb.cadence_sim_val = CADENCE_SIM_MIN_VAL; + p_simulator->_cb.time_since_last_s_evt = 0; + p_simulator->_cb.fraction_since_last_s_evt = 0; + p_simulator->_cb.time_since_last_c_evt = 0; + p_simulator->_cb.fraction_since_last_c_evt = 0; + p_simulator->_cb.device_type = p_config->device_type; + + p_simulator->_cb.sensorsim_s_cfg.min = SPEED_SIM_MIN_VAL; + p_simulator->_cb.sensorsim_s_cfg.max = SPEED_SIM_MAX_VAL; + p_simulator->_cb.sensorsim_s_cfg.incr = SPEED_SIM_INCREMENT; + p_simulator->_cb.sensorsim_s_cfg.start_at_max = false; + sensorsim_init(&(p_simulator->_cb.sensorsim_s_state), + &(p_simulator->_cb.sensorsim_s_cfg)); + p_simulator->_cb.sensorsim_c_cfg.min = CADENCE_SIM_MIN_VAL; + p_simulator->_cb.sensorsim_c_cfg.max = CADENCE_SIM_MAX_VAL; + p_simulator->_cb.sensorsim_c_cfg.incr = CADENCE_SIM_INCREMENT; + p_simulator->_cb.sensorsim_c_cfg.start_at_max = false; + p_simulator->_cb.stop_cnt = 0; + sensorsim_init(&(p_simulator->_cb.sensorsim_c_state), + &(p_simulator->_cb.sensorsim_c_cfg)); +} + + +void ant_bsc_simulator_one_iteration(ant_bsc_simulator_t * p_simulator) +{ + + // Set constant battery voltage + p_simulator->p_profile->BSC_PROFILE_coarse_bat_volt = 2; + p_simulator->p_profile->BSC_PROFILE_fract_bat_volt = 200; + p_simulator->p_profile->BSC_PROFILE_bat_status = BSC_BAT_STATUS_GOOD; + + // Calculate speed and cadence values + if (p_simulator->_cb.auto_change) + { + p_simulator->_cb.speed_sim_val = sensorsim_measure(&(p_simulator->_cb.sensorsim_s_state), + &(p_simulator->_cb.sensorsim_s_cfg)); + p_simulator->_cb.cadence_sim_val = sensorsim_measure(&(p_simulator->_cb.sensorsim_c_state), + &(p_simulator->_cb.sensorsim_c_cfg)); + } + else + { + p_simulator->_cb.speed_sim_val = p_simulator->_cb.sensorsim_s_state.current_val; + p_simulator->_cb.cadence_sim_val = p_simulator->_cb.sensorsim_c_state.current_val; + } + + // Simulate bicycle stopped for around 10s and go for around 5s only in auto-simulation + if (p_simulator->_cb.auto_change) + { + if ((p_simulator->p_profile->_cb.p_sens_cb->main_page_number == ANT_BSC_PAGE_5) && + (p_simulator->_cb.stop_cnt++ < 40)) + { + p_simulator->_cb.speed_sim_val = 0; + p_simulator->_cb.cadence_sim_val = 0; + } + else + { + if (p_simulator->_cb.stop_cnt == 60) + { + p_simulator->_cb.stop_cnt = 0; + } + } + } + if (p_simulator->_cb.speed_sim_val == 0) + { + p_simulator->p_profile->BSC_PROFILE_stop_indicator = 1; + } + else + { + p_simulator->p_profile->BSC_PROFILE_stop_indicator = 0; + } + + // @note: Take a local copy within scope in order to assist the compiler in variable register + // allocation. + const uint32_t computed_speed = p_simulator->_cb.speed_sim_val; + const uint32_t computed_cadence = p_simulator->_cb.cadence_sim_val; + + // @note: This implementation assumes that the current instantaneous speed/cadence can vary and this + // function is called with static frequency. + // value and the speed/cadence pulse interval is derived from it. The computation is based on 60 + // seconds in a minute and the used time base is 1/1024 seconds. + const uint32_t current_speed_pulse_interval = + MM_TO_METERS((WHEEL_CIRCUMFERENCE * 1024u) / computed_speed); + const uint32_t current_cadence_pulse_interval = (60u * 1024u) / computed_cadence; + + //update time from last evt detected + p_simulator->_cb.time_since_last_s_evt += ITERATION_PERIOD(p_simulator->_cb.device_type); + p_simulator->_cb.time_since_last_c_evt += ITERATION_PERIOD(p_simulator->_cb.device_type); + + // extended calculation by fraction make calculating accurate in long time perspective + p_simulator->_cb.fraction_since_last_s_evt += ITERATION_FRACTION(p_simulator->_cb.device_type); + p_simulator->_cb.fraction_since_last_c_evt += ITERATION_FRACTION(p_simulator->_cb.device_type); + + uint32_t add_period = p_simulator->_cb.fraction_since_last_s_evt / ANT_CLOCK_FREQUENCY; + if (add_period > 0) + { + p_simulator->_cb.time_since_last_s_evt++; + p_simulator->_cb.fraction_since_last_s_evt %= ANT_CLOCK_FREQUENCY; + } + + add_period = p_simulator->_cb.fraction_since_last_c_evt / ANT_CLOCK_FREQUENCY; + if (add_period > 0) + { + p_simulator->_cb.time_since_last_c_evt++; + p_simulator->_cb.fraction_since_last_c_evt %= ANT_CLOCK_FREQUENCY; + } + + // Calculate cumulative time based on time since last event (from profile data) in [1/1024] ticks + int16_t diff = p_simulator->p_profile->BSC_PROFILE_event_time - + p_simulator->_cb.prev_time_since_evt; + p_simulator->_cb.prev_time_since_evt = p_simulator->p_profile->BSC_PROFILE_event_time; + + if (diff >= 0) // Check for time count overflow + { + // No overflow + p_simulator->_cb.cumulative_time += diff / TWO_SEC_TO_TICKS; + p_simulator->_cb.cumulative_time_frac += diff % TWO_SEC_TO_TICKS; + } + else + { + p_simulator->_cb.cumulative_time += (UINT16_MAX + diff) / TWO_SEC_TO_TICKS; + p_simulator->_cb.cumulative_time_frac += (UINT16_MAX + diff) % TWO_SEC_TO_TICKS; + } + // Check fraction + if ((p_simulator->_cb.cumulative_time_frac / TWO_SEC_TO_TICKS) > 0) + { + p_simulator->_cb.cumulative_time += p_simulator->_cb.cumulative_time_frac / TWO_SEC_TO_TICKS; + p_simulator->_cb.cumulative_time_frac %= TWO_SEC_TO_TICKS; + } + // Update page data if necessary + if (p_simulator->_cb.cumulative_time != p_simulator->p_profile->BSC_PROFILE_operating_time) + { + p_simulator->p_profile->BSC_PROFILE_operating_time = p_simulator->_cb.cumulative_time; + } + + //calc number of events as will fill + uint32_t new_s_events = p_simulator->_cb.time_since_last_s_evt / + current_speed_pulse_interval; + uint32_t add_speed_event_time = new_s_events * current_speed_pulse_interval; + if ((new_s_events > 0) && ((p_simulator->_cb.device_type == BSC_SPEED_DEVICE_TYPE) || + (p_simulator->_cb.device_type == BSC_COMBINED_DEVICE_TYPE))) + { + p_simulator->p_profile->BSC_PROFILE_rev_count += new_s_events; + p_simulator->p_profile->BSC_PROFILE_speed_rev_count += new_s_events; + + // Current speed event time is the previous event time plus the current speed + // pulse interval. + uint32_t current_speed_event_time = p_simulator->p_profile->BSC_PROFILE_event_time + + add_speed_event_time; + // Set current event time. + p_simulator->p_profile->BSC_PROFILE_event_time = current_speed_event_time; // <- B<4,5> <- + + current_speed_event_time = p_simulator->p_profile->BSC_PROFILE_speed_event_time + + add_speed_event_time; + // Set current event time for combined device. + p_simulator->p_profile->BSC_PROFILE_speed_event_time = current_speed_event_time; + + p_simulator->_cb.time_since_last_s_evt -= add_speed_event_time; + } + + uint32_t new_c_events = p_simulator->_cb.time_since_last_c_evt / + current_cadence_pulse_interval; + uint32_t add_cadence_event_time = new_c_events * current_cadence_pulse_interval; + if ((new_c_events > 0) && ((p_simulator->_cb.device_type == BSC_CADENCE_DEVICE_TYPE) || + (p_simulator->_cb.device_type == BSC_COMBINED_DEVICE_TYPE))) + { + p_simulator->p_profile->BSC_PROFILE_rev_count += new_c_events; + p_simulator->p_profile->BSC_PROFILE_cadence_rev_count += new_c_events; + + // Current speed event time is the previous event time plus the current speed + // pulse interval. + uint32_t current_cadence_event_time = p_simulator->p_profile->BSC_PROFILE_event_time + + add_cadence_event_time; + // Set current event time. + p_simulator->p_profile->BSC_PROFILE_event_time = current_cadence_event_time; //<- B<4,5> <- + + current_cadence_event_time = p_simulator->p_profile->BSC_PROFILE_cadence_event_time + + add_cadence_event_time; + // Set current event time for combined device. + p_simulator->p_profile->BSC_PROFILE_cadence_event_time = current_cadence_event_time; + + p_simulator->_cb.time_since_last_c_evt -= add_cadence_event_time; + } +} + + +void ant_bsc_simulator_increment(ant_bsc_simulator_t * p_simulator) +{ + if (!p_simulator->_cb.auto_change) + { + // Speed + sensorsim_increment(&(p_simulator->_cb.sensorsim_s_state), + &(p_simulator->_cb.sensorsim_s_cfg)); + // Cadence + sensorsim_increment(&(p_simulator->_cb.sensorsim_c_state), + &(p_simulator->_cb.sensorsim_c_cfg)); + } +} + + +void ant_bsc_simulator_decrement(ant_bsc_simulator_t * p_simulator) +{ + if (!p_simulator->_cb.auto_change) + { + // Speed + sensorsim_decrement(&(p_simulator->_cb.sensorsim_s_state), + &(p_simulator->_cb.sensorsim_s_cfg)); + // Cadence + sensorsim_decrement(&(p_simulator->_cb.sensorsim_c_state), + &(p_simulator->_cb.sensorsim_c_cfg)); + } +} |