diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_cscs/ble_cscs.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_cscs/ble_cscs.h | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_cscs/ble_cscs.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_cscs/ble_cscs.h new file mode 100644 index 0000000..c62d09c --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_cscs/ble_cscs.h @@ -0,0 +1,218 @@ +/** + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/** @file + * + * @defgroup ble_cscs Cycling Speed and Cadence Service + * @{ + * @ingroup ble_sdk_srv + * @brief Cycling Speed and Cadence Service module. + * + * @details This module implements the Cycling Speed and Cadence Service. If enabled, notification + * of the Cycling Speead and Candence Measurement is performed when the application + * calls ble_cscs_measurement_send(). + * + * To use this service, you need to provide the the supported features (@ref BLE_CSCS_FEATURES). + * If you choose to support Wheel revolution data (feature bit @ref BLE_CSCS_FEATURE_WHEEL_REV_BIT), + * you then need to support the 'setting of cumulative value' operation by the supporting the + * Speed and Cadence Control Point (@ref ble_sdk_srv_sc_ctrlpt) by setting the @ref BLE_SRV_SC_CTRLPT_CUM_VAL_OP_SUPPORTED + * bit of the ctrplt_supported_functions in the @ref ble_cscs_init_t structure. + * If you want to support the 'start autocalibration' control point feature, you need, after the @ref BLE_SC_CTRLPT_EVT_START_CALIBRATION + * has been received and the auto calibration is finished, to call the @ref ble_sc_ctrlpt_rsp_send to indicate that the operation is finished + * and thus be able to receive new control point operations. + * If you want to support the 'sensor location' related operation, you need to provide a list of supported location in the + * @ref ble_cscs_init_t structure. + * + * + * @note The application must register this module as BLE event observer using the + * NRF_SDH_BLE_OBSERVER macro. Example: + * @code + * ble_cscs_t instance; + * NRF_SDH_BLE_OBSERVER(anything, BLE_CSCS_BLE_OBSERVER_PRIO, + * ble_cscs_on_ble_evt, &instance); + * @endcode + * + * @note Attention! + * To maintain compliance with Nordic Semiconductor ASA Bluetooth profile + * qualification listings, this section of source code must not be modified. + */ + +#ifndef BLE_CSCS_H__ +#define BLE_CSCS_H__ + +#include <stdint.h> +#include <stdbool.h> +#include "ble.h" +#include "ble_srv_common.h" +#include "ble_sc_ctrlpt.h" +#include "ble_sensor_location.h" +#include "nrf_sdh_ble.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@brief Macro for defining a ble_cscs instance. + * + * @param _name Name of the instance. + * @hideinitializer + */ +#define BLE_CSCS_DEF(_name) \ +static ble_cscs_t _name; \ +NRF_SDH_BLE_OBSERVER(_name ## _obs, \ + BLE_CSCS_BLE_OBSERVER_PRIO, \ + ble_cscs_on_ble_evt, &_name) + + +/** @defgroup BLE_CSCS_FEATURES Cycling Speed and Cadence Service feature bits + * @{ */ +#define BLE_CSCS_FEATURE_WHEEL_REV_BIT (0x01 << 0) /**< Wheel Revolution Data Supported bit. */ +#define BLE_CSCS_FEATURE_CRANK_REV_BIT (0x01 << 1) /**< Crank Revolution Data Supported bit. */ +#define BLE_CSCS_FEATURE_MULTIPLE_SENSORS_BIT (0x01 << 2) /**< Multiple Sensor Locations Supported bit. */ +/** @} */ + + +/**@brief Cycling Speed and Cadence Service event type. */ +typedef enum +{ + BLE_CSCS_EVT_NOTIFICATION_ENABLED, /**< Cycling Speed and Cadence value notification enabled event. */ + BLE_CSCS_EVT_NOTIFICATION_DISABLED /**< Cycling Speed and Cadence value notification disabled event. */ +} ble_cscs_evt_type_t; + +/**@brief Cycling Speed and Cadence Service event. */ +typedef struct +{ + ble_cscs_evt_type_t evt_type; /**< Type of event. */ +} ble_cscs_evt_t; + +// Forward declaration of the ble_csc_t type. +typedef struct ble_cscs_s ble_cscs_t; + +/**@brief Cycling Speed and Cadence Service event handler type. */ +typedef void (*ble_cscs_evt_handler_t) (ble_cscs_t * p_cscs, ble_cscs_evt_t * p_evt); + +/**@brief Cycling Speed and Cadence Service init structure. This contains all options and data +* needed for initialization of the service. */ +typedef struct +{ + ble_cscs_evt_handler_t evt_handler; /**< Event handler to be called for handling events in the Cycling Speed and Cadence Service. */ + ble_srv_cccd_security_mode_t csc_meas_attr_md; /**< Initial security level for cycling speed and cadence measurement attribute */ + ble_srv_cccd_security_mode_t csc_ctrlpt_attr_md; /**< Initial security level for cycling speed and cadence control point attribute */ + ble_srv_security_mode_t csc_feature_attr_md; /**< Initial security level for feature attribute */ + uint16_t feature; /**< Initial value for features of sensor @ref BLE_CSCS_FEATURES. */ + uint8_t ctrplt_supported_functions; /**< Supported control point functionalities see @ref BLE_SRV_SC_CTRLPT_SUPP_FUNC. */ + ble_sc_ctrlpt_evt_handler_t ctrlpt_evt_handler; /**< Event handler */ + ble_sensor_location_t *list_supported_locations; /**< List of supported sensor locations.*/ + uint8_t size_list_supported_locations; /**< Number of supported sensor locations in the list.*/ + ble_srv_error_handler_t error_handler; /**< Function to be called in case of an error. */ + ble_sensor_location_t *sensor_location; /**< Initial Sensor Location, if NULL, sensor_location characteristic is not added*/ + ble_srv_cccd_security_mode_t csc_sensor_loc_attr_md; /**< Initial security level for sensor location attribute */ +} ble_cscs_init_t; + +/**@brief Cycling Speed and Cadence Service structure. This contains various status information for + * the service. */ +struct ble_cscs_s +{ + ble_cscs_evt_handler_t evt_handler; /**< Event handler to be called for handling events in the Cycling Speed and Cadence Service. */ + uint16_t service_handle; /**< Handle of Cycling Speed and Cadence Service (as provided by the BLE stack). */ + ble_gatts_char_handles_t meas_handles; /**< Handles related to the Cycling Speed and Cadence Measurement characteristic. */ + ble_gatts_char_handles_t feature_handles; /**< Handles related to the Cycling Speed and Cadence feature characteristic. */ + ble_gatts_char_handles_t sensor_loc_handles; /**< Handles related to the Cycling Speed and Cadence Sensor Location characteristic. */ + uint16_t conn_handle; /**< Handle of the current connection (as provided by the BLE stack, is BLE_CONN_HANDLE_INVALID if not in a connection). */ + uint16_t feature; /**< Bit mask of features available on sensor. */ + ble_sc_ctrlpt_t ctrl_pt; /**< data for speed and cadence control point */ +}; + +/**@brief Cycling Speed and Cadence Service measurement structure. This contains a Cycling Speed and + * Cadence Service measurement. */ +typedef struct ble_cscs_meas_s +{ + bool is_wheel_rev_data_present; /**< True if Wheel Revolution Data is present in the measurement. */ + bool is_crank_rev_data_present; /**< True if Crank Revolution Data is present in the measurement. */ + uint32_t cumulative_wheel_revs; /**< Cumulative Wheel Revolutions. */ + uint16_t last_wheel_event_time; /**< Last Wheel Event Time. */ + uint16_t cumulative_crank_revs; /**< Cumulative Crank Revolutions. */ + uint16_t last_crank_event_time; /**< Last Crank Event Time. */ +} ble_cscs_meas_t; + + +/**@brief Function for initializing the Cycling Speed and Cadence Service. + * + * @param[out] p_cscs Cycling Speed and Cadence Service structure. This structure will have to + * be supplied by the application. It will be initialized by this function, + * and will later be used to identify this particular service instance. + * @param[in] p_cscs_init Information needed to initialize the service. + * + * @return NRF_SUCCESS on successful initialization of service, otherwise an error code. + */ +uint32_t ble_cscs_init(ble_cscs_t * p_cscs, ble_cscs_init_t const * p_cscs_init); + + +/**@brief Function for handling the Application's BLE Stack events. + * + * @details Handles all events from the BLE stack of interest to the Cycling Speed and Cadence + * Service. + * + * @param[in] p_ble_evt Event received from the BLE stack. + * @param[in] p_context Cycling Speed and Cadence Service structure. + */ +void ble_cscs_on_ble_evt(ble_evt_t const * p_ble_evt, void * p_context); + + +/**@brief Function for sending cycling speed and cadence measurement if notification has been enabled. + * + * @details The application calls this function after having performed a Cycling Speed and Cadence + * Service measurement. If notification has been enabled, the measurement data is encoded + * and sent to the client. + * + * @param[in] p_cscs Cycling Speed and Cadence Service structure. + * @param[in] p_measurement Pointer to new cycling speed and cadence measurement. + * + * @return NRF_SUCCESS on success, otherwise an error code. + */ +uint32_t ble_cscs_measurement_send(ble_cscs_t * p_cscs, ble_cscs_meas_t * p_measurement); + + +#ifdef __cplusplus +} +#endif + +#endif // BLE_CSCS_H__ + +/** @} */ |