diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_nus_c/ble_nus_c.c')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_nus_c/ble_nus_c.c | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_nus_c/ble_nus_c.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_nus_c/ble_nus_c.c new file mode 100644 index 0000000..ac27af7 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_nus_c/ble_nus_c.c @@ -0,0 +1,265 @@ +/** + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include "sdk_common.h" +#if NRF_MODULE_ENABLED(BLE_NUS_C) +#include <stdlib.h> + +#include "ble.h" +#include "ble_nus_c.h" +#include "ble_gattc.h" +#include "ble_srv_common.h" +#include "app_error.h" + +#define NRF_LOG_MODULE_NAME ble_nus +#include "nrf_log.h" +NRF_LOG_MODULE_REGISTER(); + +void ble_nus_c_on_db_disc_evt(ble_nus_c_t * p_ble_nus_c, ble_db_discovery_evt_t * p_evt) +{ + ble_nus_c_evt_t nus_c_evt; + memset(&nus_c_evt,0,sizeof(ble_nus_c_evt_t)); + + ble_gatt_db_char_t * p_chars = p_evt->params.discovered_db.charateristics; + + // Check if the NUS was discovered. + if ( (p_evt->evt_type == BLE_DB_DISCOVERY_COMPLETE) + && (p_evt->params.discovered_db.srv_uuid.uuid == BLE_UUID_NUS_SERVICE) + && (p_evt->params.discovered_db.srv_uuid.type == p_ble_nus_c->uuid_type)) + { + for (uint32_t i = 0; i < p_evt->params.discovered_db.char_count; i++) + { + switch (p_chars[i].characteristic.uuid.uuid) + { + case BLE_UUID_NUS_RX_CHARACTERISTIC: + nus_c_evt.handles.nus_rx_handle = p_chars[i].characteristic.handle_value; + break; + + case BLE_UUID_NUS_TX_CHARACTERISTIC: + nus_c_evt.handles.nus_tx_handle = p_chars[i].characteristic.handle_value; + nus_c_evt.handles.nus_tx_cccd_handle = p_chars[i].cccd_handle; + break; + + default: + break; + } + } + if (p_ble_nus_c->evt_handler != NULL) + { + nus_c_evt.conn_handle = p_evt->conn_handle; + nus_c_evt.evt_type = BLE_NUS_C_EVT_DISCOVERY_COMPLETE; + p_ble_nus_c->evt_handler(p_ble_nus_c, &nus_c_evt); + } + } +} + +/**@brief Function for handling Handle Value Notification received from the SoftDevice. + * + * @details This function will uses the Handle Value Notification received from the SoftDevice + * and checks if it is a notification of the NUS TX characteristic from the peer. If + * it is, this function will decode the data and send it to the + * application. + * + * @param[in] p_ble_nus_c Pointer to the NUS Client structure. + * @param[in] p_ble_evt Pointer to the BLE event received. + */ +static void on_hvx(ble_nus_c_t * p_ble_nus_c, ble_evt_t const * p_ble_evt) +{ + // HVX can only occur from client sending. + if ( (p_ble_nus_c->handles.nus_tx_handle != BLE_GATT_HANDLE_INVALID) + && (p_ble_evt->evt.gattc_evt.params.hvx.handle == p_ble_nus_c->handles.nus_tx_handle) + && (p_ble_nus_c->evt_handler != NULL)) + { + ble_nus_c_evt_t ble_nus_c_evt; + + ble_nus_c_evt.evt_type = BLE_NUS_C_EVT_NUS_TX_EVT; + ble_nus_c_evt.p_data = (uint8_t *)p_ble_evt->evt.gattc_evt.params.hvx.data; + ble_nus_c_evt.data_len = p_ble_evt->evt.gattc_evt.params.hvx.len; + + p_ble_nus_c->evt_handler(p_ble_nus_c, &ble_nus_c_evt); + NRF_LOG_DEBUG("Client sending data."); + } +} + +uint32_t ble_nus_c_init(ble_nus_c_t * p_ble_nus_c, ble_nus_c_init_t * p_ble_nus_c_init) +{ + uint32_t err_code; + ble_uuid_t uart_uuid; + ble_uuid128_t nus_base_uuid = NUS_BASE_UUID; + + VERIFY_PARAM_NOT_NULL(p_ble_nus_c); + VERIFY_PARAM_NOT_NULL(p_ble_nus_c_init); + + err_code = sd_ble_uuid_vs_add(&nus_base_uuid, &p_ble_nus_c->uuid_type); + VERIFY_SUCCESS(err_code); + + uart_uuid.type = p_ble_nus_c->uuid_type; + uart_uuid.uuid = BLE_UUID_NUS_SERVICE; + + p_ble_nus_c->conn_handle = BLE_CONN_HANDLE_INVALID; + p_ble_nus_c->evt_handler = p_ble_nus_c_init->evt_handler; + p_ble_nus_c->handles.nus_tx_handle = BLE_GATT_HANDLE_INVALID; + p_ble_nus_c->handles.nus_rx_handle = BLE_GATT_HANDLE_INVALID; + + return ble_db_discovery_evt_register(&uart_uuid); +} + +void ble_nus_c_on_ble_evt(ble_evt_t const * p_ble_evt, void * p_context) +{ + ble_nus_c_t * p_ble_nus_c = (ble_nus_c_t *)p_context; + + if ((p_ble_nus_c == NULL) || (p_ble_evt == NULL)) + { + return; + } + + if ( (p_ble_nus_c->conn_handle != BLE_CONN_HANDLE_INVALID) + &&(p_ble_nus_c->conn_handle != p_ble_evt->evt.gap_evt.conn_handle) + ) + { + return; + } + + switch (p_ble_evt->header.evt_id) + { + case BLE_GATTC_EVT_HVX: + on_hvx(p_ble_nus_c, p_ble_evt); + break; + + case BLE_GAP_EVT_DISCONNECTED: + if (p_ble_evt->evt.gap_evt.conn_handle == p_ble_nus_c->conn_handle + && p_ble_nus_c->evt_handler != NULL) + { + ble_nus_c_evt_t nus_c_evt; + + nus_c_evt.evt_type = BLE_NUS_C_EVT_DISCONNECTED; + + p_ble_nus_c->conn_handle = BLE_CONN_HANDLE_INVALID; + p_ble_nus_c->evt_handler(p_ble_nus_c, &nus_c_evt); + } + break; + + default: + // No implementation needed. + break; + } +} + +/**@brief Function for creating a message for writing to the CCCD. */ +static uint32_t cccd_configure(uint16_t conn_handle, uint16_t cccd_handle, bool enable) +{ + uint8_t buf[BLE_CCCD_VALUE_LEN]; + + buf[0] = enable ? BLE_GATT_HVX_NOTIFICATION : 0; + buf[1] = 0; + + ble_gattc_write_params_t const write_params = + { + .write_op = BLE_GATT_OP_WRITE_REQ, + .flags = BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE, + .handle = cccd_handle, + .offset = 0, + .len = sizeof(buf), + .p_value = buf + }; + + return sd_ble_gattc_write(conn_handle, &write_params); +} + + +uint32_t ble_nus_c_tx_notif_enable(ble_nus_c_t * p_ble_nus_c) +{ + VERIFY_PARAM_NOT_NULL(p_ble_nus_c); + + if ( (p_ble_nus_c->conn_handle == BLE_CONN_HANDLE_INVALID) + ||(p_ble_nus_c->handles.nus_tx_cccd_handle == BLE_GATT_HANDLE_INVALID) + ) + { + return NRF_ERROR_INVALID_STATE; + } + return cccd_configure(p_ble_nus_c->conn_handle,p_ble_nus_c->handles.nus_tx_cccd_handle, true); +} + + +uint32_t ble_nus_c_string_send(ble_nus_c_t * p_ble_nus_c, uint8_t * p_string, uint16_t length) +{ + VERIFY_PARAM_NOT_NULL(p_ble_nus_c); + + if (length > BLE_NUS_MAX_DATA_LEN) + { + NRF_LOG_WARNING("Content too long."); + return NRF_ERROR_INVALID_PARAM; + } + if (p_ble_nus_c->conn_handle == BLE_CONN_HANDLE_INVALID) + { + NRF_LOG_WARNING("Connection handle invalid."); + return NRF_ERROR_INVALID_STATE; + } + + ble_gattc_write_params_t const write_params = + { + .write_op = BLE_GATT_OP_WRITE_CMD, + .flags = BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE, + .handle = p_ble_nus_c->handles.nus_rx_handle, + .offset = 0, + .len = length, + .p_value = p_string + }; + + return sd_ble_gattc_write(p_ble_nus_c->conn_handle, &write_params); +} + + +uint32_t ble_nus_c_handles_assign(ble_nus_c_t * p_ble_nus, + uint16_t conn_handle, + ble_nus_c_handles_t const * p_peer_handles) +{ + VERIFY_PARAM_NOT_NULL(p_ble_nus); + + p_ble_nus->conn_handle = conn_handle; + if (p_peer_handles != NULL) + { + p_ble_nus->handles.nus_tx_cccd_handle = p_peer_handles->nus_tx_cccd_handle; + p_ble_nus->handles.nus_tx_handle = p_peer_handles->nus_tx_handle; + p_ble_nus->handles.nus_rx_handle = p_peer_handles->nus_rx_handle; + } + return NRF_SUCCESS; +} +#endif // NRF_MODULE_ENABLED(BLE_NUS_C) |