1 files changed, 128 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/n5_starterkit.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/n5_starterkit.h
new file mode 100644
index 0000000..57d88f7
--- /dev/null
+++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/n5_starterkit.h
@@ -0,0 +1,128 @@
+/**
+ * This software is subject to the ANT+ Shared Source License
+ * www.thisisant.com/swlicenses
+ * Copyright (c) Dynastream Innovations, Inc. 2015
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ * 1) Redistributions of source code must retain the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer.
+ * 
+ * 2) Redistributions in binary form must reproduce the above
+ *    copyright notice, this list of conditions and the following
+ *    disclaimer in the documentation and/or other materials
+ *    provided with the distribution.
+ * 
+ * 3) Neither the name of Dynastream nor the names of its
+ *    contributors may be used to endorse or promote products
+ *    derived from this software without specific prior
+ *    written permission.
+ * 
+ * The following actions are prohibited:
+ * 1) Redistribution of source code containing the ANT+ Network
+ *    Key. The ANT+ Network Key is available to ANT+ Adopters.
+ *    Please refer to http://thisisant.com to become an ANT+
+ *    Adopter and access the key.
+ * 
+ * 2) Reverse engineering, decompilation, and/or disassembly of
+ *    software provided in binary form under this license.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW
+ * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
+ * ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
+ * 
+ */
+#ifndef N5STARTERKIT_H
+#define N5STARTERKIT_H
+
+#include "nrf_gpio.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// LEDs definitions for N5DK1
+#define LEDS_NUMBER    4
+
+// IO board active low leds
+// N5DK1 does not define LED_START or LED_STOP since the LEDS are not on sequential pins
+#define LED_A        8  //LED A on N5 Starter Kit IO Board
+#define LED_B        3  //LED B on N5 Starter Kit IO Board
+#define LED_C        15 //LED C on N5 Starter Kit IO Board
+#define LED_D        30 //LED D on N5 Starter Kit IO Board
+
+#define LEDS_ACTIVE_STATE 0
+
+#define LEDS_LIST { LED_A, LED_B, LED_C, LED_D }
+
+#define LEDS_INV_MASK  LEDS_MASK
+
+#define BSP_LED_0      LED_A
+#define BSP_LED_1      LED_B
+#define BSP_LED_2      LED_C
+#define BSP_LED_3      LED_D
+
+#define BUTTONS_NUMBER 4
+
+// IO board pull-up buttons
+#define BUTTON_A     23 //BUTTON A on N5 Starter Kit IO Board
+#define BUTTON_B     2  //BUTTON B on N5 Starter Kit IO Board
+#define BUTTON_C     12 //BUTTON C on N5 Starter Kit IO Board
+#define BUTTON_D     11 //BUTTON D on N5 Starter Kit IO Board
+#define BUTTON_PULL  NRF_GPIO_PIN_PULLUP
+
+#define BUTTONS_ACTIVE_STATE 0
+
+#define BSP_BUTTON_0   BUTTON_A
+#define BSP_BUTTON_1   BUTTON_B
+#define BSP_BUTTON_2   BUTTON_C
+#define BSP_BUTTON_3   BUTTON_D
+
+#define BUTTONS_LIST { BUTTON_A, BUTTON_B, BUTTON_C, BUTTON_D }
+
+// Battery board pull-up switches
+#define SWITCH_1     5  // Switch 1 on N5 Starter Kit Battery Board
+#define SWITCH_2     0  // Switch 2 on N5 Starter Kit Battery Board
+#define SWITCH_3     6  // Switch 3 on N5 Starter Kit Battery Board
+#define SWITCH_4     24 // Switch 4 on N5 Starter Kit Battery Board
+#define SWITCH_5     9  // Switch 5 on N5 Starter Kit Battery Board
+#define SWITCH_PULL  NRF_GPIO_PIN_PULLUP
+
+#define SWITCHES_NUMBER 5
+
+#define BSP_SWITCH_0 SWITCH_1
+#define BSP_SWITCH_1 SWITCH_2
+#define BSP_SWITCH_2 SWITCH_3
+#define BSP_SWITCH_3 SWITCH_4
+#define BSP_SWITCH_4 SWITCH_5
+
+#define SWITCHES_MASK 0x01000261
+
+// N5DK1 does not have UART peripheral. Dummy defines for compilation.
+#define RX_PIN_NUMBER  UART_PIN_DISCONNECTED
+#define TX_PIN_NUMBER  UART_PIN_DISCONNECTED
+#define CTS_PIN_NUMBER UART_PIN_DISCONNECTED
+#define RTS_PIN_NUMBER UART_PIN_DISCONNECTED
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif