diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h new file mode 100644 index 0000000..5e492d9 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10001.h @@ -0,0 +1,165 @@ +/** + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef PCA10001_H +#define PCA10001_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "nrf_gpio.h" + +#define LED_START 18 +#define LED_0 18 +#define LED_1 19 +#define LED_STOP 19 + +#define LEDS_ACTIVE_STATE 1 + +#define BSP_LED_0 LED_0 +#define BSP_LED_1 LED_1 + +#define LEDS_INV_MASK 0x00000000 + +#define BUTTON_START 16 +#define BUTTON_0 16 +#define BUTTON_1 17 +#define BUTTON_STOP 17 +#define BUTTON_PULL NRF_GPIO_PIN_PULLUP + +#define BUTTONS_ACTIVE_STATE 0 + +#define BSP_BUTTON_0 BUTTON_0 +#define BSP_BUTTON_1 BUTTON_1 + +#define BUTTONS_NUMBER 2 +#define LEDS_NUMBER 2 + +#define BUTTONS_LIST { BUTTON_0, BUTTON_1 } +#define LEDS_LIST { LED_0, LED_1 } + +#define RX_PIN_NUMBER 11 +#define TX_PIN_NUMBER 9 +#define CTS_PIN_NUMBER 10 +#define RTS_PIN_NUMBER 8 +#define HWFC true + +#define SPIS_MISO_PIN 20 // SPI MISO signal. +#define SPIS_CSN_PIN 21 // SPI CSN signal. +#define SPIS_MOSI_PIN 22 // SPI MOSI signal. +#define SPIS_SCK_PIN 23 // SPI SCK signal. + +#define SPIM0_SCK_PIN 23u /**< SPI clock GPIO pin number. */ +#define SPIM0_MOSI_PIN 20u /**< SPI Master Out Slave In GPIO pin number. */ +#define SPIM0_MISO_PIN 22u /**< SPI Master In Slave Out GPIO pin number. */ +#define SPIM0_SS_PIN 21u /**< SPI Slave Select GPIO pin number. */ + +#define SPIM1_SCK_PIN 29u /**< SPI clock GPIO pin number. */ +#define SPIM1_MOSI_PIN 24u /**< SPI Master Out Slave In GPIO pin number. */ +#define SPIM1_MISO_PIN 28u /**< SPI Master In Slave Out GPIO pin number. */ +#define SPIM1_SS_PIN 25u /**< SPI Slave Select GPIO pin number. */ + +// serialization APPLICATION board + +// UART +// this configuration works with the SPI wires setup +#define SER_APP_RX_PIN 20 // UART RX pin number. +#define SER_APP_TX_PIN 22 // UART TX pin number. +#define SER_APP_CTS_PIN 23 // UART Clear To Send pin number. +#define SER_APP_RTS_PIN 21 // UART Request To Send pin number. + +// SPI +#if 0 +#define SER_APP_SPIM0_SCK_PIN 20 // SPI clock GPIO pin number. +#define SER_APP_SPIM0_MOSI_PIN 17 // SPI Master Out Slave In GPIO pin number +#define SER_APP_SPIM0_MISO_PIN 16 // SPI Master In Slave Out GPIO pin number +#define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number +#define SER_APP_SPIM0_RDY_PIN 19 // SPI READY GPIO pin number +#define SER_APP_SPIM0_REQ_PIN 18 // SPI REQUEST GPIO pin number +#else +#define SER_APP_SPIM0_SCK_PIN 23 // SPI clock GPIO pin number. +#define SER_APP_SPIM0_MOSI_PIN 20 // SPI Master Out Slave In GPIO pin number +#define SER_APP_SPIM0_MISO_PIN 22 // SPI Master In Slave Out GPIO pin number +#define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number +#define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number +#define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number +#endif + +// serialization CONNECTIVITY board + +// UART +#if 0 +#define SER_CON_RX_PIN 22 // UART RX pin number. +#define SER_CON_TX_PIN 20 // UART TX pin number. +#define SER_CON_CTS_PIN 21 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define SER_CON_RTS_PIN 23 // UART Request To Send pin number. Not used if HWFC is set to false. +#else +// this configuration works with the SPI wires setup +#define SER_CON_RX_PIN 20 // UART RX pin number. +#define SER_CON_TX_PIN 22 // UART TX pin number. +#define SER_CON_CTS_PIN 21 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define SER_CON_RTS_PIN 23 // UART Request To Send pin number. Not used if HWFC is set to false. +#endif + +//SPI +#if 0 +#define SER_CON_SPIS_SCK_PIN 20 // SPI SCK signal. +#define SER_CON_SPIS_MISO_PIN 16 // SPI MISO signal. +#define SER_CON_SPIS_MOSI_PIN 17 // SPI MOSI signal. +#define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal. +#define SER_CON_SPIS_RDY_PIN 19 // SPI READY GPIO pin number. +#define SER_CON_SPIS_REQ_PIN 18 // SPI REQUEST GPIO pin number. +#else +#define SER_CON_SPIS_SCK_PIN 23 // SPI SCK signal. +#define SER_CON_SPIS_MOSI_PIN 22 // SPI MOSI signal. +#define SER_CON_SPIS_MISO_PIN 20 // SPI MISO signal. +#define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal. +#define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number. +#define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number. +#endif + +#define SER_CONN_ASSERT_LED_PIN LED_0 + + +#ifdef __cplusplus +} +#endif + +#endif |