diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h new file mode 100644 index 0000000..9d390a3 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/pca10040.h @@ -0,0 +1,177 @@ +/** + * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef PCA10040_H +#define PCA10040_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include "nrf_gpio.h" + +// LEDs definitions for PCA10040 +#define LEDS_NUMBER 4 + +#define LED_START 17 +#define LED_1 17 +#define LED_2 18 +#define LED_3 19 +#define LED_4 20 +#define LED_STOP 20 + +#define LEDS_ACTIVE_STATE 0 + +#define LEDS_INV_MASK LEDS_MASK + +#define LEDS_LIST { LED_1, LED_2, LED_3, LED_4 } + +#define BSP_LED_0 LED_1 +#define BSP_LED_1 LED_2 +#define BSP_LED_2 LED_3 +#define BSP_LED_3 LED_4 + +#define BUTTONS_NUMBER 4 + +#define BUTTON_START 13 +#define BUTTON_1 13 +#define BUTTON_2 14 +#define BUTTON_3 15 +#define BUTTON_4 16 +#define BUTTON_STOP 16 +#define BUTTON_PULL NRF_GPIO_PIN_PULLUP + +#define BUTTONS_ACTIVE_STATE 0 + +#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4 } + +#define BSP_BUTTON_0 BUTTON_1 +#define BSP_BUTTON_1 BUTTON_2 +#define BSP_BUTTON_2 BUTTON_3 +#define BSP_BUTTON_3 BUTTON_4 + +#define RX_PIN_NUMBER 8 +#define TX_PIN_NUMBER 6 +#define CTS_PIN_NUMBER 7 +#define RTS_PIN_NUMBER 5 +#define HWFC true + +#define SPIS_MISO_PIN 28 // SPI MISO signal. +#define SPIS_CSN_PIN 12 // SPI CSN signal. +#define SPIS_MOSI_PIN 25 // SPI MOSI signal. +#define SPIS_SCK_PIN 29 // SPI SCK signal. + +#define SPIM0_SCK_PIN 29 // SPI clock GPIO pin number. +#define SPIM0_MOSI_PIN 25 // SPI Master Out Slave In GPIO pin number. +#define SPIM0_MISO_PIN 28 // SPI Master In Slave Out GPIO pin number. +#define SPIM0_SS_PIN 12 // SPI Slave Select GPIO pin number. + +#define SPIM1_SCK_PIN 2 // SPI clock GPIO pin number. +#define SPIM1_MOSI_PIN 3 // SPI Master Out Slave In GPIO pin number. +#define SPIM1_MISO_PIN 4 // SPI Master In Slave Out GPIO pin number. +#define SPIM1_SS_PIN 5 // SPI Slave Select GPIO pin number. + +#define SPIM2_SCK_PIN 12 // SPI clock GPIO pin number. +#define SPIM2_MOSI_PIN 13 // SPI Master Out Slave In GPIO pin number. +#define SPIM2_MISO_PIN 14 // SPI Master In Slave Out GPIO pin number. +#define SPIM2_SS_PIN 15 // SPI Slave Select GPIO pin number. + +// serialization APPLICATION board - temp. setup for running serialized MEMU tests +#define SER_APP_RX_PIN 23 // UART RX pin number. +#define SER_APP_TX_PIN 24 // UART TX pin number. +#define SER_APP_CTS_PIN 2 // UART Clear To Send pin number. +#define SER_APP_RTS_PIN 25 // UART Request To Send pin number. + +#define SER_APP_SPIM0_SCK_PIN 27 // SPI clock GPIO pin number. +#define SER_APP_SPIM0_MOSI_PIN 2 // SPI Master Out Slave In GPIO pin number +#define SER_APP_SPIM0_MISO_PIN 26 // SPI Master In Slave Out GPIO pin number +#define SER_APP_SPIM0_SS_PIN 23 // SPI Slave Select GPIO pin number +#define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number +#define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number + +// serialization CONNECTIVITY board +#define SER_CON_RX_PIN 24 // UART RX pin number. +#define SER_CON_TX_PIN 23 // UART TX pin number. +#define SER_CON_CTS_PIN 25 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define SER_CON_RTS_PIN 2 // UART Request To Send pin number. Not used if HWFC is set to false. + + +#define SER_CON_SPIS_SCK_PIN 27 // SPI SCK signal. +#define SER_CON_SPIS_MOSI_PIN 2 // SPI MOSI signal. +#define SER_CON_SPIS_MISO_PIN 26 // SPI MISO signal. +#define SER_CON_SPIS_CSN_PIN 23 // SPI CSN signal. +#define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number. +#define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number. + +#define SER_CONN_CHIP_RESET_PIN 11 // Pin used to reset connectivity chip + + +// Arduino board mappings +#define ARDUINO_SCL_PIN 27 // SCL signal pin +#define ARDUINO_SDA_PIN 26 // SDA signal pin +#define ARDUINO_AREF_PIN 2 // Aref pin +#define ARDUINO_13_PIN 25 // Digital pin 13 +#define ARDUINO_12_PIN 24 // Digital pin 12 +#define ARDUINO_11_PIN 23 // Digital pin 11 +#define ARDUINO_10_PIN 22 // Digital pin 10 +#define ARDUINO_9_PIN 20 // Digital pin 9 +#define ARDUINO_8_PIN 19 // Digital pin 8 + +#define ARDUINO_7_PIN 18 // Digital pin 7 +#define ARDUINO_6_PIN 17 // Digital pin 6 +#define ARDUINO_5_PIN 16 // Digital pin 5 +#define ARDUINO_4_PIN 15 // Digital pin 4 +#define ARDUINO_3_PIN 14 // Digital pin 3 +#define ARDUINO_2_PIN 13 // Digital pin 2 +#define ARDUINO_1_PIN 12 // Digital pin 1 +#define ARDUINO_0_PIN 11 // Digital pin 0 + +#define ARDUINO_A0_PIN 3 // Analog channel 0 +#define ARDUINO_A1_PIN 4 // Analog channel 1 +#define ARDUINO_A2_PIN 28 // Analog channel 2 +#define ARDUINO_A3_PIN 29 // Analog channel 3 +#define ARDUINO_A4_PIN 30 // Analog channel 4 +#define ARDUINO_A5_PIN 31 // Analog channel 5 + + +#ifdef __cplusplus +} +#endif + +#endif // PCA10040_H |