diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/proprietary_rf/gzll/nrf_gzll_constants.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/proprietary_rf/gzll/nrf_gzll_constants.h | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/proprietary_rf/gzll/nrf_gzll_constants.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/proprietary_rf/gzll/nrf_gzll_constants.h new file mode 100644 index 0000000..80df7c1 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/proprietary_rf/gzll/nrf_gzll_constants.h @@ -0,0 +1,188 @@ +/** + * Copyright (c) 2011 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/** + * @file + * @brief Gazell Link Layer constants and default values. + * + * NOTE! Changing values here has no effect. They are only provided as a reference. + */ + +#ifndef NRF_GZLL_CONSTANTS_H__ +#define NRF_GZLL_CONSTANTS_H__ + +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * @addtogroup gzll_02_api + * @{ + */ + + +/*****************************************************************************/ +/** @name Hardware resources used by Gazell */ +/*****************************************************************************/ +#define NRF_GZLL_HIGH_IRQ_PRIORITY 0 ///< Interrupt priority the Gazell timer and the radio +#define NRF_GZLL_LOW_IRQ_PRIORITY 1 ///< Interrupt priority for Gazell callback functions. + +#ifndef USE_SD_HW_RESOURCES + +#define NRF_GZLL_SWI_IRQn SWI0_IRQn ///< Software interrupt # used for callback functions. +#define NRF_GZLL_SWI_IRQ_HANDLER SWI0_IRQHandler ///< Software interrupt handler used for callback functions. +#define NRF_GZLL_TIMER NRF_TIMER2 ///< Timer to be used as flywheel timer. +#define NRF_GZLL_TIMER_IRQn TIMER2_IRQn ///< Interrupt # for the timer. +#define NRF_GZLL_TIMER_IRQ_HANDLER TIMER2_IRQHandler ///< Interrupt handler for the timer. + +// In addition, Gazell uses the radio peripheral and radio interrupts. + +/* + * PPI configuration + */ +#define NRF_GZLL_PPI_EEP0 (NRF_PPI->CH0_EEP) ///< Gazell PPI event endpoint 0 +#define NRF_GZLL_PPI_TEP0 (NRF_PPI->CH0_TEP) ///< Gazell PPI task endpoint 0 +#define NRF_GZLL_PPI_EEP1 (NRF_PPI->CH1_EEP) ///< Gazell PPI event endpoint 1 +#define NRF_GZLL_PPI_TEP1 (NRF_PPI->CH1_TEP) ///< Gazell PPI task endpoint 1 +#define NRF_GZLL_PPI_EEP2 (NRF_PPI->CH2_EEP) ///< Gazell PPI event endpoint 2 +#define NRF_GZLL_PPI_TEP2 (NRF_PPI->CH2_TEP) ///< Gazell PPI task endpoint 2 + +#define NRF_GZLL_PPI_CHEN_MSK_0_AND_1 (0x03) ///< Channel enable/disable mask for PPI endpoint 0 and 1. +#define NRF_GZLL_PPI_CHEN_MSK_2 (0x04) ///< Channel enable/disable mask for PPI endpoint 2. + +#else + +#define NRF_GZLL_SWI_IRQn SWI1_IRQn ///< Software interrupt # used for callback functions. +#define NRF_GZLL_SWI_IRQ_HANDLER SWI1_IRQHandler ///< Software interrupt handler used for callback functions. +#define NRF_GZLL_TIMER NRF_TIMER0 ///< Timer to be used as flywheel timer. +#define NRF_GZLL_TIMER_PERPOWER_Msk POWER_PERPOWER_TIMER0_Msk ///< PERPOWER mask for the timer. +#define NRF_GZLL_TIMER_IRQn TIMER0_IRQn ///< Interrupt # for the timer. +#define NRF_GZLL_TIMER_IRQ_HANDLER TIMER0_IRQHandler ///< Interrupt handler for the timer. + +// In addition, Gazell uses the radio peripheral and radio interrupts. + +/* + * PPI configuration + */ +#define NRF_GZLL_PPI_EEP0 (NRF_PPI->CH8_EEP) ///< Gazell PPI event endpoint 0 +#define NRF_GZLL_PPI_TEP0 (NRF_PPI->CH8_TEP) ///< Gazell PPI task endpoint 0 +#define NRF_GZLL_PPI_EEP1 (NRF_PPI->CH9_EEP) ///< Gazell PPI event endpoint 1 +#define NRF_GZLL_PPI_TEP1 (NRF_PPI->CH9_TEP) ///< Gazell PPI task endpoint 1 +#define NRF_GZLL_PPI_EEP2 (NRF_PPI->CH10_EEP) ///< Gazell PPI event endpoint 2 +#define NRF_GZLL_PPI_TEP2 (NRF_PPI->CH10_TEP) ///< Gazell PPI task endpoint 2 + +#define NRF_GZLL_PPI_CHEN_MSK_0_AND_1 (0x300) ///< Channel enable/disable mask for PPI endpoint 0 and 1. +#define NRF_GZLL_PPI_CHEN_MSK_2 (0x400) ///< Channel enable/disable mask for PPI endpoint 2. + +#endif +/** @} */ + +/*****************************************************************************/ +/** @name Constant pipe and FIFO configuration */ +/*****************************************************************************/ +#define NRF_GZLL_CONST_PIPE_COUNT 8 ///< Number of TX pipes (at least one for each Device-Host pairs). +#define NRF_GZLL_CONST_FIFO_LENGTH 3 ///< Maximum number of packets allowed in a TX or RX FIFO. +#define NRF_GZLL_CONST_MAX_TOTAL_PACKETS 6 ///< Maximum number of packets available for reservation at any one time. +#define NRF_GZLL_CONST_MAX_PAYLOAD_LENGTH 32 ///< Maximum allowed payload length in bytes. +#define NRF_GZLL_CONST_CALLBACK_QUEUE_LENGTH 10 ///< Maximum number of notifications allowed in the callback queue. +/** @} */ + +/*****************************************************************************/ +/** @name Default radio configuration */ +/*****************************************************************************/ +#define NRF_GZLL_DEFAULT_TX_POWER NRF_GZLL_TX_POWER_0_DBM ///< Default TX power. +#define NRF_GZLL_DEFAULT_DATARATE NRF_GZLL_DATARATE_2MBIT ///< Default data rate. + +#define NRF_GZLL_DEFAULT_CHANNEL_TABLE {4, 25, 42, 63, 77} ///< Default channel table. +#define NRF_GZLL_DEFAULT_CHANNEL_TABLE_SIZE 5 ///< Default channel table size. +#define NRF_GZLL_CONST_MAX_CHANNEL_TABLE_SIZE 16 ///< Maximum channel table size allowed by Gazell. +/** @} */ + +/*****************************************************************************/ +/** @name Default Address configuration */ +/*****************************************************************************/ + +/* +Corresponds to Legacy nRFgo SDK Gazell config: +#define GZLL_DEFAULT_ADDRESS_PIPE0 {0x01, 0x04, 0x07, 0x0A, 0x0D} +#define GZLL_DEFAULT_ADDRESS_PIPE1 {0x02, 0x05, 0x08, 0x0B, 0x0E} +#define GZLL_DEFAULT_ADDRESS_PIPE2 3 +#define GZLL_DEFAULT_ADDRESS_PIPE3 4 +#define GZLL_DEFAULT_ADDRESS_PIPE4 5 +#define GZLL_DEFAULT_ADDRESS_PIPE5 6 +*/ + +#define NRF_GZLL_DEFAULT_FULL_ADDRESS_PIPE0 {0x01, 0x04, 0x07, 0x0A, 0x0D} ///< Corresponding legacy Gazell pipe 0 address. +#define NRF_GZLL_DEFAULT_BASE_ADDRESS_0 0x0D0A0704 ///< Default base address 0. +#define NRF_GZLL_DEFAULT_BASE_ADDRESS_1 0x0E0B0805 ///< Default base address 1. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_0 1 ///< Default prefix address pipe 0. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_1 2 ///< Default prefix address pipe 1. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_2 3 ///< Default prefix address pipe 2. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_3 4 ///< Default prefix address pipe 3. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_4 5 ///< Default prefix address pipe 4. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_5 6 ///< Default prefix address pipe 5. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_6 7 ///< Default prefix address pipe 6. +#define NRF_GZLL_DEFAULT_PREFIX_BYTE_7 8 ///< Default prefix address pipe 7. +#define NRF_GZLL_DEFAULT_BASE_ADDRESS_LENGTH NRF_GZLL_BASE_ADDRESS_LENGTH_4B ///< Default on-air base address length. +#define NRF_GZLL_DEFAULT_RX_PIPES_ENABLED 0x000000FF ///< Enabled Rx pipes. See nrf_gzll_set_rx_pipes_enabled(). +/** @} */ + +/*****************************************************************************/ +/** @name Default timeslot and synchronization configuration */ +/*****************************************************************************/ +#define NRF_GZLL_DEFAULT_TIMESLOT_PERIOD 600 ///< Default timeslot period. +#define NRF_GZLL_DEFAULT_TIMESLOTS_PER_CHANNEL 2 ///< Timeslots use by the Host and by the Device when communication is in sync. +#define NRF_GZLL_DEFAULT_DEVICE_CHANNEL_SELECTION_POLICY NRF_GZLL_DEVICE_CHANNEL_SELECTION_POLICY_USE_SUCCESSFUL ///< Default channel Gazell Device channel selection policy +#define NRF_GZLL_DEFAULT_MAX_TX_ATTEMPTS 0 ///< Default maximum TX attempts for each packet. A value of zero implies the infinite number of TX attempts. +#define NRF_GZLL_DEFAULT_XOSC_CTL NRF_GZLL_XOSC_CTL_AUTO ///< Deafult setting for controlling the XOSC +#define NRF_GZLL_DEFAULT_TIMESLOTS_PER_CHANNEL_WHEN_DEVICE_OUT_OF_SYNC 15 ///< Timeslots use by the Device before communication is in sync. +#define NRF_GZLL_DEFAULT_SYNC_LIFETIME (3 * NRF_GZLL_DEFAULT_CHANNEL_TABLE_SIZE * NRF_GZLL_DEFAULT_TIMESLOTS_PER_CHANNEL) ///< Number of timeslots to keep the timer running so that communication remains synchronized. +/** @} */ + +#define NRF_GZLL_PA_LNA_MAX_RAMP_UP_TIME 129 ///< Max external front end ramp up time [us]. +#define NRF_GZLL_PA_LNA_PPI_CHANNELS_NUM 4 ///< Number of PPI channels used for front end control. + +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif |