diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/common/ser_config.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/common/ser_config.h | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/common/ser_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/common/ser_config.h new file mode 100644 index 0000000..a432d2e --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/common/ser_config.h @@ -0,0 +1,121 @@ +/** + * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef SER_CONFIG_H__ +#define SER_CONFIG_H__ + +#include <stdint.h> + +#include "nrf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/***********************************************************************************************//** + * General parameters configuration. + **************************************************************************************************/ + +/** Value used as error code on SoftDevice stack dump. Can be used to identify stack location on + * stack unwind.*/ +#define SER_SD_ERROR_CODE (0xDEADBEEFUL) + +/** Value used as error code indicating warning - unusual situation but not critical so system + * should NOT be reset. */ +#define SER_WARNING_CODE (0xBADDCAFEUL) + +/***********************************************************************************************//** + * HAL Transport layer configuration. + **************************************************************************************************/ + +/** Max packets size in serialization HAL Transport layer (packets before adding PHY header i.e. + * packet length). */ +#define SER_HAL_TRANSPORT_APP_TO_CONN_MAX_PKT_SIZE (512UL) +#define SER_HAL_TRANSPORT_CONN_TO_APP_MAX_PKT_SIZE (512UL) + +#define SER_HAL_TRANSPORT_MAX_PKT_SIZE ((SER_HAL_TRANSPORT_APP_TO_CONN_MAX_PKT_SIZE) >= \ + (SER_HAL_TRANSPORT_CONN_TO_APP_MAX_PKT_SIZE) \ + ? \ + (SER_HAL_TRANSPORT_APP_TO_CONN_MAX_PKT_SIZE) : \ + (SER_HAL_TRANSPORT_CONN_TO_APP_MAX_PKT_SIZE)) +#ifdef SER_CONNECTIVITY + #define SER_HAL_TRANSPORT_TX_MAX_PKT_SIZE SER_HAL_TRANSPORT_CONN_TO_APP_MAX_PKT_SIZE + #define SER_HAL_TRANSPORT_RX_MAX_PKT_SIZE SER_HAL_TRANSPORT_APP_TO_CONN_MAX_PKT_SIZE + +#else /* APPLICATION SIDE */ + #define SER_HAL_TRANSPORT_TX_MAX_PKT_SIZE SER_HAL_TRANSPORT_APP_TO_CONN_MAX_PKT_SIZE + #define SER_HAL_TRANSPORT_RX_MAX_PKT_SIZE SER_HAL_TRANSPORT_CONN_TO_APP_MAX_PKT_SIZE +#endif /* SER_CONNECTIVITY */ + + +/***********************************************************************************************//** + * SER_PHY layer configuration. + **************************************************************************************************/ + +#define SER_PHY_HEADER_SIZE 2 + +#define SER_PHY_HCI_SLIP_TX_BUF_SIZE 30 + +#define SER_PHY_SPI_FREQUENCY NRF_DRV_SPI_FREQ_1M + +/** Max transfer unit for SPI MASTER and SPI SLAVE. */ +#define SER_PHY_SPI_MTU_SIZE 255 + +/** UART transmission parameters */ +#define SER_PHY_UART_FLOW_CTRL NRF_UART_HWFC_ENABLED +#define SER_PHY_UART_PARITY NRF_UART_PARITY_INCLUDED +#define SER_PHY_UART_BAUDRATE_VAL 1000000 + +#define SER_PHY_UART_BAUDRATE CONCAT_2(NRF_UART_BAUDRATE_,SER_PHY_UART_BAUDRATE_VAL) + +/** Configuration timeouts of connectivity MCU. */ +#define CONN_CHIP_RESET_TIME 50 /**< Time to keep the reset line to the connectivity chip low (in milliseconds). */ +#define CONN_CHIP_WAKEUP_TIME 500 /**< Time for the connectivity chip to reset and become ready to receive serialized commands (in milliseconds). */ + +#define SER_MAX_CONNECTIONS 8 + +#ifndef SER_MAX_ADV_DATA +#define SER_MAX_ADV_DATA 256 +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* SER_CONFIG_H__ */ |