diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/connectivity/codecs/ble/serializers/ble_gap_conn.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/connectivity/codecs/ble/serializers/ble_gap_conn.h | 1526 |
1 files changed, 1526 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/connectivity/codecs/ble/serializers/ble_gap_conn.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/connectivity/codecs/ble/serializers/ble_gap_conn.h new file mode 100644 index 0000000..4464552 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/connectivity/codecs/ble/serializers/ble_gap_conn.h @@ -0,0 +1,1526 @@ +/** + * Copyright (c) 2013 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef BLE_GAP_CONN_H__ +#define BLE_GAP_CONN_H__ + +/**@file + * + * @defgroup ble_gap_conn GAP Connectivity command request decoders and command response encoders + * @{ + * @ingroup ser_conn_s130_codecs + * + * @brief GAP Connectivity command request decoders and command response encoders + */ +#include "ble_gap.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@brief Decodes @ref sd_ble_gap_authenticate command request. + * + * @sa @ref ble_gap_authenticate_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle + * @param[out] pp_sec_params Pointer to pointer to security parameters. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_authenticate_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * const p_conn_handle, + ble_gap_sec_params_t * * const pp_sec_params); + +/**@brief Encodes @ref sd_ble_gap_authenticate command response. + * + * @sa @ref ble_gap_authenticate_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_authenticate_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +#if defined(NRF_SD_BLE_API_VERSION) && (NRF_SD_BLE_API_VERSION <= 5) +/**@brief Decodes @ref sd_ble_gap_adv_data_set command request. + * + * @sa @ref ble_gap_adv_data_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] pp_data Pointer to the buffer raw data to be placed in advertisement packet. + * @param[out] p_dlen Pointer to data length for p_data. + * @param[out] pp_sr_data Pointer to the buffer raw data to be placed in scan response packet. + * @param[out] p_srdlen Pointer to data length for p_sr_data. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_adv_data_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint8_t * * const pp_data, + uint8_t * p_dlen, + uint8_t * * const pp_sr_data, + uint8_t * p_srdlen); + +/**@brief Encodes @ref sd_ble_gap_adv_data_set command response. + * + * @sa @ref ble_gap_adv_data_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_adv_data_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); +#endif +/**@brief Decodes @ref sd_ble_gap_adv_start command request. + * + * @sa @ref ble_gap_adv_start_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_adv_params Pointer to pointer to advertising parameters. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_adv_start_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, +#if NRF_SD_BLE_API_VERSION > 5 + uint8_t * p_adv_handle +#else + ble_gap_adv_params_t * * const pp_adv_params +#endif +#if NRF_SD_BLE_API_VERSION >= 4 + ,uint8_t * p_conn_cfg_tag +#endif + ); + +/**@brief Encodes @ref sd_ble_gap_adv_start command response. + * + * @sa @ref ble_gap_adv_start_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_adv_start_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_device_name_get command request. + * + * @sa @ref ble_gap_device_name_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_dev_name Pointer to pointer to device name buffer. + * @param[out] pp_dev_name_len Pointer to pointer to device name length location. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_device_name_get_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint8_t * * pp_dev_name, + uint16_t * * pp_dev_name_len); + +/**@brief Encodes @ref sd_ble_gap_device_name_get command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_dev_name Pointer to device name buffer. + * @param[in] p_dev_name_len Length of device name buffer. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_device_name_get_rsp_enc(uint32_t return_code, + uint8_t const * const p_dev_name, + uint16_t * p_dev_name_len, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_conn_param_update command request. + * + * @sa @ref ble_gap_conn_param_update_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle. + * @param[out] pp_conn_params Pointer to pointer to connection parameters. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + * @retval NRF_ERROR_INVALID_DATA Decoding failure. Invalid value for connection + * parameters field present. + */ +uint32_t ble_gap_conn_param_update_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + ble_gap_conn_params_t * * const pp_conn_params); + +/**@brief Encodes @ref sd_ble_gap_conn_param_update command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_conn_param_update_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + + +/**@brief Decodes @ref sd_ble_gap_disconnect command request. + * + * @sa @ref ble_gap_disconnect_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[in] p_conn_handle Pointer to Connection Handle. + * @param[in] p_hci_status Pointer to HCI Status Code. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_disconnect_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * const p_conn_handle, + uint8_t * const p_hci_status); + +/**@brief Encodes @ref sd_ble_gap_disconnect command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_disconnect_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_tx_power_set command request. + * + * @sa @ref ble_gap_tx_power_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[in] p_tx_power Pointer to TX power value. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_tx_power_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, +#if NRF_SD_BLE_API_VERSION > 5 + uint8_t * p_role, uint16_t * p_handle, +#endif + int8_t * p_tx_power); + +/**@brief Encodes @ref sd_ble_gap_tx_power_set command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_tx_power_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_ppcp_set command request. + * + * @sa @ref ble_gap_ppcp_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_conn_params Pointer to pointer to connection parameters to be set. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + * @retval NRF_ERROR_INVALID_DATA Decoding failure. Invalid value for connection + * parameters field present. + */ +uint32_t ble_gap_ppcp_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_conn_params_t * * const pp_conn_params); + +/**@brief Encodes @ref sd_ble_gap_ppcp_set command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_ppcp_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + + +/**@brief Decodes @ref sd_ble_gap_ppcp_get command request. + * + * @sa @ref ble_gap_ppcp_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_conn_params Pointer to pointer to ble_gap_conn_params_t. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_ppcp_get_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + ble_gap_conn_params_t * * const pp_conn_params); + +/**@brief Encodes @ref sd_ble_gap_ppcp_get command response. + * + * @sa @ref ble_gap_ppcp_get_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * @param[in] p_conn_params Pointer to ble_gap_conn_params_t. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_ppcp_get_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + ble_gap_conn_params_t const * const p_conn_params); + + +uint32_t ble_gap_adv_stop_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint8_t * p_adv_handle); +/**@brief Encodes @ref sd_ble_gap_adv_stop command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_adv_stop_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_auth_key_reply command request. + * + * @sa @ref ble_gap_auth_key_reply_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle. + * @param[out] p_key_type Pointer to key type. + * @param[out] pp_key Pointer to pointer to buffer for incoming key. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_auth_key_reply_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint16_t * p_conn_handle, + uint8_t * p_key_type, + uint8_t * * const pp_key); + +/**@brief Encodes @ref sd_ble_gap_auth_key_reply command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_auth_key_reply_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_sec_params_reply command request. + * + * @sa @ref ble_gap_sec_params_reply_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle. + * @param[out] p_sec_status Pointer to security status. + * @param[out] pp_sec_params Pointer to pointer to security parameters structure. + * @param[out] pp_sec_keyset Pointer to pointer to security keyset structure. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + * @retval NRF_ERROR_INVALID_DATA Decoding failure. Invalid value for connection + * parameters field present. + */ +uint32_t ble_gap_sec_params_reply_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + uint8_t * p_sec_status, + ble_gap_sec_params_t * * const pp_sec_params, + ble_gap_sec_keyset_t * * const pp_sec_keyset); + +/**@brief Encodes @ref sd_ble_gap_sec_params_reply command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in] p_sec_keyset Pointer to security keyset structure. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_sec_params_reply_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + ble_gap_sec_keyset_t * const p_sec_keyset); + +/**@brief Decodes @ref sd_ble_gap_rssi_start command request. + * + * @sa @ref ble_gap_rssi_start_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle. + * @param[out] p_threshold_dbm Pointer to threshold in dBm. + * @param[out] p_skip_count Pointer to sample skip count. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_rssi_start_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + uint8_t * p_threshold_dbm, + uint8_t * p_skip_count); + +/**@brief Encodes @ref sd_ble_gap_rssi_start command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ + +uint32_t ble_gap_rssi_start_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_rssi_stop command request. + * + * @sa @ref ble_gap_rssi_stop_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] conn_handle Pointer to connection handle. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ + +uint32_t ble_gap_rssi_stop_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * conn_handle); + +/**@brief Encodes @ref sd_ble_gap_rssi_stop command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ + +uint32_t ble_gap_rssi_stop_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_appearance_get command request. + * + * @sa @ref ble_gap_appearance_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_appearance Pointer to pointer to uint16_t appearance. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_appearance_get_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint16_t * * const pp_appearance); + +/**@brief Encodes @ref sd_ble_gap_appearance_get command response. + * + * @sa @ref ble_gap_appearance_get_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * @param[in] p_appearance Pointer to uint16_t appearance. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_appearance_get_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + uint16_t const * const p_appearance); + + +/**@brief Decodes @ref sd_ble_gap_appearance_set command request. + * + * @sa @ref ble_gap_tx_power_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] buf_len Length (in bytes) of the packet. + * @param[out] p_appearance Pointer to the appearance. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_appearance_set_req_dec(uint8_t const * const p_buf, + uint32_t buf_len, + uint16_t * const p_appearance); + +/**@brief Encodes @ref sd_ble_gap_appearance_set command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_appearance_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + + +/**@brief Decodes @ref sd_ble_gap_sec_info_reply command request. + * + * @sa @ref ble_gap_sec_info_reply_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of the packet. + * @param[out] p_conn_handle Pointer to the Connection Handle. + * @param[out] pp_enc_info Pointer to pointer to Encryption Information. + * @param[out] pp_id_info Pointer to pointer to ID Information. + * @param[out] pp_sign_info Pointer to pointer to Signing Information. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_sec_info_reply_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint16_t * p_conn_handle, + ble_gap_enc_info_t * * const pp_enc_info, + ble_gap_irk_t * * const pp_id_info, + ble_gap_sign_info_t * * const pp_sign_info); + +/**@brief Encodes @ref sd_ble_gap_sec_info_reply command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_sec_info_reply_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_device_name_set command request. + * + * @sa @ref ble_gap_device_name_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of the packet. + * @param[out] pp_write_perm Pointer to pointer to write permissions filed. + * @param[out] pp_dev_name Pointer to pointer to device name string. + * @param[out] p_dev_name_len Pointer to device name string length. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_device_name_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_conn_sec_mode_t * * const pp_write_perm, + uint8_t * * const pp_dev_name, + uint16_t * const p_dev_name_len); + + +/**@brief Encodes @ref sd_ble_gap_device_name_set command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_device_name_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_conn_sec_get command request. + * + * @sa @ref ble_gap_conn_sec_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to Connection Handle. + * @param[out] pp_conn_sec Pointer to pointer to @ref ble_gap_conn_sec_t to be filled by + * the SoftDevice. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_conn_sec_get_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + ble_gap_conn_sec_t * * const pp_conn_sec); + +/**@brief Encodes @ref sd_ble_gap_conn_sec_get command response. + * + * @sa @ref ble_gap_conn_sec_get_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_conn_sec Pointer to @ref ble_gap_conn_sec_t to be encoded. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_conn_sec_get_rsp_enc(uint32_t return_code, + ble_gap_conn_sec_t * const p_conn_sec, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +#ifndef S112 +/**@brief Encodes @ref sd_ble_gap_scan_stop command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_scan_stop_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_connect command request. + * + * @sa @ref ble_gap_connect_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_addr Pointer to pointer to peer address @ref ble_gap_addr_t. + * @param[out] pp_scan_params Pointer to pointer to @ref ble_gap_scan_params_t. + * @param[out] pp_conn_params Pointer to pointer to @ref ble_gap_conn_params_t. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_connect_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_addr_t * * const pp_addr, + ble_gap_scan_params_t * * const pp_scan_params, + ble_gap_conn_params_t * * const pp_conn_params +#if NRF_SD_BLE_API_VERSION >= 4 + ,uint8_t * p_conn_cfg_tag +#endif + ); + +/**@brief Encodes @ref sd_ble_gap_connect command response. + * + * @sa @ref ble_gap_connect_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_connect_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_scan_start command request. + * + * @sa @ref ble_gap_scan_start_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_scan_params Pointer to pointer to @ref ble_gap_scan_params_t. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_scan_start_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_scan_params_t * * const pp_scan_params +#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5 + ,ble_data_t * * const pp_adv_report_buffer +#endif + ); + +/**@brief Encodes @ref sd_ble_gap_scan_start command response. + * + * @sa @ref ble_gap_scan_start_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_scan_start_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Encodes @ref sd_ble_gap_connect_cancel command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_connect_cancel_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + + +/**@brief Decodes @ref sd_ble_gap_encrypt command request. + * + * @sa @ref ble_gap_encrypt_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer connection_handle. + * @param[out] pp_master_id Pointer to pointer to @ref ble_gap_master_id_t. + * @param[out] pp_enc_info Pointer to pointer to @ref ble_gap_enc_info_t. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ + +uint32_t ble_gap_encrypt_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint16_t * const p_conn_handle, + ble_gap_master_id_t ** const pp_master_id, + ble_gap_enc_info_t ** const pp_enc_info); + +/**@brief Encodes @ref sd_ble_gap_encrypt command response. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in, out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_encrypt_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +#endif + +/**@brief Decodes @ref sd_ble_gap_rssi_get command request. + * + * @sa @ref ble_gap_rssi_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[in] p_conn_handle Connection handle. + * @param[out] pp_rssi Pointer to pointer to RSSI value. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_rssi_get_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint16_t * p_conn_handle, + int8_t * * const pp_rssi +#if NRF_SD_BLE_API_VERSION > 5 + ,uint8_t * * const pp_ch_index +#endif + ); + +/**@brief Encodes @ref sd_ble_gap_rssi_get command response. + * + * @sa @ref ble_gap_rssi_get_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * @param[in] p_rssi RSSI value. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_rssi_get_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + int8_t * p_rssi +#if NRF_SD_BLE_API_VERSION > 5 + ,uint8_t * p_ch_index +#endif + ); + +/**@brief Decodes @ref sd_ble_gap_keypress_notify command request. + * + * @sa @ref ble_gap_keypress_notify_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Connection handle. + * @param[out] p_kp_not Pointer kp_not value. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_keypress_notify_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + uint8_t * p_kp_not); + +/**@brief Encodes @ref sd_ble_gap_keypress_notify command response. + * + * @sa @ref ble_gap_keypress_notify_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_keypress_notify_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_lesc_dhkey_reply command request. + * + * @sa @ref ble_gap_lesc_dhkey_reply_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Connection handle. + * @param[out] pp_dhkey Pointer to pointer to dhkey struct. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_lesc_dhkey_reply_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + ble_gap_lesc_dhkey_t * * pp_dhkey); + +/**@brief Encodes @ref sd_ble_gap_lesc_dhkey_reply command response. + * + * @sa @ref ble_gap_lesc_dhkey_reply_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_lesc_dhkey_reply_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_lesc_oob_data_set command request. + * + * @sa @ref ble_gap_lesc_oob_data_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Connection handle. + * @param[out] pp_oobd_own Pointer to pointer to own OOB data struct. + * @param[out] pp_oobd_peer Pointer to pointer to peer OOB data struct. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_lesc_oob_data_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + ble_gap_lesc_oob_data_t * * pp_oobd_own, + ble_gap_lesc_oob_data_t * * pp_oobd_peer); + +/**@brief Encodes @ref sd_ble_gap_lesc_oob_data_set command response. + * + * @sa @ref ble_gap_lesc_oob_data_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_lesc_oob_data_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_lesc_oob_data_get command request. + * + * @sa @ref ble_gap_lesc_oob_data_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Connection handle. + * @param[out] pp_pk_own Pointer to pointer to PK. + * @param[out] pp_oobd_own Pointer to pointer to own OOB data struct. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_lesc_oob_data_get_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * p_conn_handle, + ble_gap_lesc_p256_pk_t * * pp_pk_own, + ble_gap_lesc_oob_data_t * * pp_oobd_own); + +/**@brief Encodes @ref sd_ble_gap_lesc_oob_data_get command response. + * + * @sa @ref ble_gap_lesc_oob_data_get_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[in] p_oobd_own Pointer to OOB data. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_lesc_oob_data_get_rsp_enc(uint32_t return_code, + ble_gap_lesc_oob_data_t * p_oobd_own, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_addr_get command request. + * + * @sa @ref ble_gap_addr_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] pp_address Pointer to pointer to address. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_addr_get_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + ble_gap_addr_t * * const pp_address); + +/**@brief Encodes @ref sd_ble_gap_addr_get command response. + * + * @sa @ref ble_gap_addr_get_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * @param[in] p_address Pointer to @ref ble_gap_addr_t address + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_addr_get_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + ble_gap_addr_t const * const p_address); + +/** @brief Decodes @ref sd_ble_gap_addr_set command request. + * + * @sa @ref ble_gap_addr_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] pp_addr Pointer to pointer to the address structure. + + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_addr_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_addr_t * * const pp_addr); + +/**@brief Encodes @ref sd_ble_gap_addr_set command response. + * + * @sa @ref ble_gap_addr_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_addr_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/** @brief Decodes @ref sd_ble_gap_privacy_set command request. + * + * @sa @ref ble_gap_privacy_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] pp_privacy_params Pointer to pointer to the privacy settings structure. + + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_privacy_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_privacy_params_t * * const pp_privacy_params); + +/**@brief Encodes @ref sd_ble_gap_privacy_set command response. + * + * @sa @ref ble_gap_privacy_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_privacy_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/** @brief Decodes @ref sd_ble_gap_privacy_get command request. + * + * @sa @ref ble_gap_privacy_get_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] pp_privacy_params Pointer to pointer to the privacy settings structure. + + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_privacy_get_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + ble_gap_privacy_params_t * * const pp_privacy_params); + +/**@brief Encodes @ref sd_ble_gap_privacy_set command response. + * + * @sa @ref ble_gap_privacy_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * @param[out] p_privacy_params Pointer to privacy settings structure. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_privacy_get_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + ble_gap_privacy_params_t const * const p_privacy_params); + +/** @brief Decodes @ref sd_ble_gap_whitelist_set command request. + * + * @sa @ref ble_gap_whitelist_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] ppp_wl_addrs Pointer to a whitelist of peer addresses. + * @param[out] p_len Pointer to a length of the whitelist. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_whitelist_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_addr_t * * * const ppp_wl_addrs, + uint8_t * const p_len); + +/**@brief Encodes @ref sd_ble_gap_whitelist_set command response. + * + * @sa @ref ble_gap_whitelist_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_whitelist_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/** @brief Decodes @ref sd_ble_gap_device_identities_set command request. + * + * @sa @ref ble_gap_device_identities_set_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] ppp_id_keys Pointer to an array of peer identity addresses and peer IRKs. + * @param[out] ppp_local_irks Pointer to an array of local IRKs. + * @param[out] p_len Pointer to a length of the device identity list. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_device_identities_set_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + ble_gap_id_key_t * * * const ppp_id_keys, + ble_gap_irk_t * * * const ppp_local_irks, + uint8_t * const p_len); + +/**@brief Encodes @ref sd_ble_gap_device_identities_set command response. + * + * @sa @ref ble_gap_device_identities_set_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_device_identities_set_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); +#if NRF_SD_BLE_API_VERSION >= 4 && !defined(S112) +/** @brief Decodes @ref sd_bble_gap_data_length_update command request. + * + * @sa @ref ble_gap_data_length_update_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of request packet. + * @param[out] p_conn_handle Pointer to a connection handle. + * @param[out] pp_dl_params Pointer to pointer to a data length params structure. + * @param[out] pp_dl_limitation Pointer to pointer to a data length limitation structure. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_data_length_update_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint16_t * p_conn_handle, + ble_gap_data_length_params_t * * const pp_dl_params, + ble_gap_data_length_limitation_t * * const pp_dl_limitation); + +/**@brief Encodes @ref sd_ble_gap_data_length_update command response. + * + * @sa @ref ble_gap_data_length_update_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_data_length_update_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + ble_gap_data_length_limitation_t const * const p_dl_limitation); +#endif +#if NRF_SD_BLE_API_VERSION >= 5 +/**@brief Decodes @ref sd_ble_gap_phy_update command request. + * + * @sa @ref ble_gap_phy_update_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle + * @param[out] pp_gap_phys Pointer to pointer to the struct. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_phy_update_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint16_t * const p_conn_handle, + ble_gap_phys_t * * const pp_gap_phys); + +/**@brief Encodes @ref sd_ble_gap_phy_update command response. + * + * @sa @ref ble_gap_phy_update_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_phy_update_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); +#endif + +#if NRF_SD_BLE_API_VERSION >= 6 +/**@brief Decodes @ref sd_ble_gap_adv_set_configure command request. + * + * @sa @ref ble_gap_adv_set_configure_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_conn_handle Pointer to connection handle + * @param[out] pp_adv_handle Pointer to pointer to the struct. + * @param[out] pp_adv_data Pointer to pointer to the struct. + * @param[out] pp_adv_params Pointer to pointer to the struct. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_adv_set_configure_req_dec(uint8_t const * const p_buf, + uint16_t packet_len, + uint8_t * * const pp_adv_handle, + ble_gap_adv_data_t **const pp_adv_data, + ble_gap_adv_params_t **const pp_adv_params); + + +/**@brief Encodes @ref sd_ble_gap_adv_set_configure command response. + * + * @sa @ref ble_gap_adv_set_configure_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * @param[in] p_adv_handle Pointer to the field to be encoded. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_adv_set_configure_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len, + uint8_t const * const p_adv_handle); + +#ifndef S112 +/**@brief Decodes @ref sd_ble_gap_qos_channel_survey_start command request. + * + * @sa @ref ble_gap_qos_channel_survey_start_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * @param[out] p_interval_us Pointer to interval. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_qos_channel_survey_start_req_dec(uint8_t const * const p_buf, + uint32_t packet_len, + uint32_t * const p_interval_us); + +/**@brief Encodes @ref sd_ble_gap_qos_channel_survey_start command response. + * + * @sa @ref ble_gap_qos_channel_survey_start_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_qos_channel_survey_start_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); + +/**@brief Decodes @ref sd_ble_gap_qos_channel_survey_stop command request. + * + * @sa @ref ble_gap_qos_channel_survey_stop_rsp_enc for response encoding. + * + * @param[in] p_buf Pointer to beginning of command request packet. + * @param[in] packet_len Length (in bytes) of response packet. + * + * @retval NRF_SUCCESS Decoding success. + * @retval NRF_ERROR_NULL Decoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Decoding failure. Incorrect buffer length. + * @retval NRF_ERROR_INVALID_PARAM Decoding failure. Invalid operation type. + */ +uint32_t ble_gap_qos_channel_survey_stop_req_dec(uint8_t const * const p_buf, + uint32_t packet_len); + +/**@brief Encodes @ref sd_ble_gap_qos_channel_survey_stop command response. + * + * @sa @ref ble_gap_qos_channel_survey_stop_req_dec for request decoding. + * + * @param[in] return_code Return code indicating if command was successful or not. + * @param[out] p_buf Pointer to buffer where encoded data command response will be + * returned. + * @param[in,out] p_buf_len \c in: size of \p p_buf buffer. + * \c out: Length of encoded command response packet. + * + * @retval NRF_SUCCESS Encoding success. + * @retval NRF_ERROR_NULL Encoding failure. NULL pointer supplied. + * @retval NRF_ERROR_INVALID_LENGTH Encoding failure. Incorrect buffer length. + */ +uint32_t ble_gap_qos_channel_survey_stop_rsp_enc(uint32_t return_code, + uint8_t * const p_buf, + uint32_t * const p_buf_len); +#endif //!defined(S112) +#endif +/** @} */ +#ifdef __cplusplus +} +#endif + +#endif |