diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/toolchain/arm/uicr_config.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/toolchain/arm/uicr_config.h | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/toolchain/arm/uicr_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/toolchain/arm/uicr_config.h new file mode 100644 index 0000000..2e4d166 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/toolchain/arm/uicr_config.h @@ -0,0 +1,114 @@ +/** + * Copyright (c) 2013 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* Template files (including this one) are application specific and therefore expected to + be copied into the application project folder prior to its use! */ + +#ifndef _UICR_CONFIG_H +#define _UICR_CONFIG_H + +/*lint ++flb "Enter library region" */ + +#include <stdint.h> + +/* + * Include this file in your project if you want to include in your compiled code files data + * for the User Information Configuration Registers (UICR) area; see nRF51 Series Reference + * Manual chapter User Information Configuration Registers. This file declares one variable + * per register of the UICR area and informs the linker where to place them. To include + * the desired value in the desired address, uncomment the variable with the proper address + * at the target area and update the assignment value. + * + * Please note that UICR values are stored in a reserved area of the flash and should only be + * stored into when downloading a hex file. Do not use these defined variables to store data + * at run time. + * + * Note as well that this file uses one non-standard attribute ("at"). It will only function + * with the ARMCC compiler toolset. + * + * Note that the hex file generated when this file is included will fail to download when using + * the standard download algorithm provided by Nordic. See example project "uicr_config_example" + * in any of the board example folders for an example of the recommended download method as well + * as the documentation that follows with the SDK. nrfjprog can be used as normal. + * + * Please note as well that if you are using a SoftDevice the UICR_CLENR0 address will + * already be in use. Do not uncomment that line. + */ + +// const uint32_t UICR_CLENR0 __attribute__((at(0x10001000))) __attribute__((used)) = 0xFFFFFFFF; // WARNING: This address might be used by the SoftDevice. Use with care. +// const uint32_t UICR_RBPCONF __attribute__((at(0x10001004))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_XTALFREQ __attribute__((at(0x10001008))) __attribute__((used)) = 0xFFFFFFFF; + +// const uint32_t UICR_ADDR_0x80 __attribute__((at(0x10001080))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x84 __attribute__((at(0x10001084))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x88 __attribute__((at(0x10001088))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x8C __attribute__((at(0x1000108C))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x90 __attribute__((at(0x10001090))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x94 __attribute__((at(0x10001094))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x98 __attribute__((at(0x10001098))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0x9C __attribute__((at(0x1000109C))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xA0 __attribute__((at(0x100010A0))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xA4 __attribute__((at(0x100010A4))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xA8 __attribute__((at(0x100010A8))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xAC __attribute__((at(0x100010AC))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xB0 __attribute__((at(0x100010B0))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xB4 __attribute__((at(0x100010B4))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xB8 __attribute__((at(0x100010B8))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xBC __attribute__((at(0x100010BC))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xC0 __attribute__((at(0x100010C0))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xC4 __attribute__((at(0x100010C4))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xC8 __attribute__((at(0x100010C8))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xCC __attribute__((at(0x100010CC))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xD0 __attribute__((at(0x100010D0))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xD4 __attribute__((at(0x100010D4))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xD8 __attribute__((at(0x100010D8))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xDC __attribute__((at(0x100010DC))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xE0 __attribute__((at(0x100010E0))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xE4 __attribute__((at(0x100010E4))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xE8 __attribute__((at(0x100010E8))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xEC __attribute__((at(0x100010EC))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xF0 __attribute__((at(0x100010F0))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xF4 __attribute__((at(0x100010F4))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xF8 __attribute__((at(0x100010F8))) __attribute__((used)) = 0xFFFFFFFF; +// const uint32_t UICR_ADDR_0xFC __attribute__((at(0x100010FC))) __attribute__((used)) = 0xFFFFFFFF; + +/*lint --flb "Leave library region" */ + +#endif //_UICR_CONFIG_H |