diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart')
66 files changed, 28972 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/assert.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/assert.c new file mode 100644 index 0000000..595afa9 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/assert.c @@ -0,0 +1,94 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "app_error.h" +#include "nrf_log.h" +#include "nrf_log_ctrl.h" +#include <stdarg.h> + +#define DEBUG_BUFFER_SIZE 256u + +void sys_assert_handler(const char * condition, const int line, const char * file) +{ + if ((condition == NULL) || (file == NULL)) + { + APP_ERROR_HANDLER(NRF_ERROR_NULL); + } + + NRF_LOG_ERROR("Assertion fault: !(%s) line: %i file: %s ", + NRF_LOG_PUSH((char *) condition), + line, + NRF_LOG_PUSH((char *) file)); + + assert_info_t assert_info = + { + .line_num = line, + .p_file_name = (uint8_t *) file + }; + app_error_fault_handler(NRF_FAULT_ID_SDK_ASSERT, 0, (uint32_t)(&assert_info)); + + UNUSED_VARIABLE(assert_info); +} + +void sys_assert_info_handler(const char * condition, + const int line, + const char * file, + const char * info_fmt, + ...) +{ + int err_code = 0; + char msg_buf[DEBUG_BUFFER_SIZE] = ""; + va_list args = {0}; + + if (info_fmt == NULL) + { + APP_ERROR_HANDLER(NRF_ERROR_NULL); + } + + va_start(args, info_fmt); + err_code = vsnprintf(msg_buf, sizeof(msg_buf), info_fmt, args); + if ((err_code < 0) || (err_code >= (int) sizeof(msg_buf))) + { + APP_ERROR_HANDLER(NRF_ERROR_INTERNAL); + } + va_end(args); + + NRF_LOG_INFO("Assertion info: %s", NRF_LOG_PUSH(msg_buf)); + sys_assert_handler(condition, line, file); +} diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/config.h new file mode 100644 index 0000000..c3716dc --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/config.h @@ -0,0 +1,72 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef CONFIG_H__ +#define CONFIG_H__ + +#include "sdk_config.h" +#include "802_15_4_config.h" + +#ifndef CONFIG_SECURE +#define CONFIG_SECURE 0 +#endif // CONFIG_SECURE +#define CONFIG_PAN_ID 0x1234 +#define CONFIG_INIT_DONE_PIN LED_1 +#define CONFIG_UPSTREAM_PIN LED_2 +#define CONFIG_DOWNSTREAM_PIN LED_3 +#define CONFIG_ERROR_PIN LED_4 +#define CONFIG_UART_MODULE 0 +#define CONFIG_UART_TX_PIN 6 +#define CONFIG_UART_RX_PIN 8 +#define CONFIG_UART_CTS_PIN 7 +#define CONFIG_UART_RTS_PIN 5 +#define CONFIG_UART_TX_BUFFER_SIZE 256 +#define CONFIG_UART_RX_BUFFER_SIZE 128 +#define CONFIG_UART_BAUDRATE HAL_UART_BAUDRATE_38400 +#define CONFIG_UART_PARITY HAL_UART_PARITY_NONE +#define CONFIG_DATA_SECURITY_LEVEL 5 +#define CONFIG_SECURITY_KEY {0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCA, 0xCD, 0xCE, 0xCF} + +#if defined ( __ICCARM__ ) + #undef __ALIGN + #define __ALIGN(n) +#endif + +#endif // CONFIG_H__ + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/fsm.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/fsm.c new file mode 100644 index 0000000..843cd26 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/fsm.c @@ -0,0 +1,601 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "config.h" + +#include "fsm.h" +#include "uart.h" +#if (CONFIG_SECURE == 1) +#include "security.h" +#endif +#include "sys_fsm.h" +#include "sys_utils.h" +#include "sys_memory_manager.h" +#include "sys_debug.h" +#include "sys_task_scheduler.h" +#include "boards.h" +#include "nrf_gpio.h" +#include <stdint.h> +#include <stddef.h> + +typedef struct +{ + mac_payload_descriptor_t payload_descr; + uint8_t length; +} fsm_frame_item_t; + +typedef enum +{ + S_INITIAL, + S_SETTING_CH, + S_SETTING_SHORT_ADDR, + S_SETTING_EXT_ADDR, + S_SETTING_PAN_ID, + S_SETTING_RX_ON_IDLE, + S_SETTING_SECURITY, + S_WORKING, +} fsm_states_t; + +typedef enum +{ + GU_SET_SUCCESS, + GU_SEND_SUCCESS, + GU_UART_TX_DATA_AVAILABLE, + GU_RADIO_TX_IDLE, + GU_UART_TX_IDLE, +} fsm_guards_t; + +typedef enum +{ + A_CHANNEL_SET, + A_SHORT_ADDR_SET, + A_EXT_ADDR_SET, + A_PAN_ID_SET, + A_RX_ON_IDLE_SET, + A_CONFIG_COMPLETE, + A_RADIO_TX_START, + A_RADIO_TX_RESTART, + A_UART_TX_START, + A_UART_TX_IDLE_SET, +#if (CONFIG_SECURE == 1) + A_SECURITY_SET +#endif +} fsm_actions_t; + +typedef void (* fsm_action_t)(void *); +typedef bool (* fsm_guard_t)(void *); +typedef void (* app_action_t)(void); + +typedef void (* store_data_handler_t)(fsm_event_data_t *); + +// prototypes +static void fsm_action(sys_fsm_action_id_t action_id, void * p_data); +static bool fsm_guard(sys_fsm_guard_id_t guard_id, void * p_data); + +static void a_channel_set(void * p_data); +static void a_short_addr_set(void * p_data); +static void a_ext_addr_set(void * p_data); +static void a_pan_id_set(void * p_data); +static void a_rx_on_idle_set(void * p_data); +static void a_config_complete(void * p_data); +static void a_radio_tx_start(void * p_data); +static void a_radio_tx_restart(void * p_data); +static void a_uart_tx_start(void * p_data); +static void a_uart_tx_idle_set(void * p_data); +#if (CONFIG_SECURE == 1) +static void a_security_set(void * p_data); +#endif + +static bool gu_set_success(void * p_data); +static bool gu_send_success(void * p_data); +static bool gu_uart_tx_data_available(void * p_data); +static bool gu_radio_tx_idle(void * p_data); +static bool gu_uart_tx_idle(void * p_data); + +static bool frames_available(void); + +static void mlme_set_conf_store(fsm_event_data_t * p_data); +static void mcps_data_ind_store(fsm_event_data_t * p_data); +static void mcps_data_conf_store(fsm_event_data_t * p_data); + +static void mcps_data_conf(mcps_data_conf_t * conf); +static void mlme_set_conf(mlme_set_conf_t * conf); + +static const sys_fsm_transition_t m_transition_table[] = +{ + SYS_FSM_STATE ( S_WORKING ), + SYS_FSM_TRANSITION( E_SET_DONE, SYS_FSM_ALWAYS, A_CONFIG_COMPLETE, SYS_FSM_SAME_STATE ), + SYS_FSM_TRANSITION( E_UART_TX_DONE, GU_UART_TX_DATA_AVAILABLE, A_UART_TX_START, SYS_FSM_SAME_STATE ), + SYS_FSM_TRANSITION( E_UART_TX_DONE, SYS_FSM_OTHERWISE, A_UART_TX_IDLE_SET, SYS_FSM_SAME_STATE ), + SYS_FSM_TRANSITION( E_UART_RX_DONE, GU_RADIO_TX_IDLE, A_RADIO_TX_START, SYS_FSM_SAME_STATE ), + SYS_FSM_TRANSITION( E_RADIO_RX_DONE, GU_UART_TX_IDLE, A_UART_TX_START, SYS_FSM_SAME_STATE ), + SYS_FSM_TRANSITION( E_RADIO_TX_DONE, GU_SEND_SUCCESS, A_RADIO_TX_START, SYS_FSM_SAME_STATE ), + SYS_FSM_TRANSITION( E_RADIO_TX_DONE, SYS_FSM_OTHERWISE, A_RADIO_TX_RESTART, SYS_FSM_SAME_STATE ), + + SYS_FSM_STATE ( S_INITIAL ), + SYS_FSM_TRANSITION( E_START_CONFIG, SYS_FSM_ALWAYS, A_CHANNEL_SET, S_SETTING_CH ), + + SYS_FSM_STATE ( S_SETTING_CH ), + SYS_FSM_TRANSITION( E_SET_DONE, GU_SET_SUCCESS, A_SHORT_ADDR_SET, S_SETTING_SHORT_ADDR ), + + SYS_FSM_STATE ( S_SETTING_SHORT_ADDR ), + SYS_FSM_TRANSITION( E_SET_DONE, GU_SET_SUCCESS, A_EXT_ADDR_SET, S_SETTING_EXT_ADDR ), + + SYS_FSM_STATE ( S_SETTING_EXT_ADDR ), + SYS_FSM_TRANSITION( E_SET_DONE, GU_SET_SUCCESS, A_PAN_ID_SET, S_SETTING_PAN_ID ), +#if (CONFIG_SECURE == 1) + SYS_FSM_STATE ( S_SETTING_PAN_ID ), + SYS_FSM_TRANSITION( E_SET_DONE, GU_SET_SUCCESS, A_RX_ON_IDLE_SET, S_SETTING_RX_ON_IDLE ), + + SYS_FSM_STATE ( S_SETTING_RX_ON_IDLE ), + SYS_FSM_TRANSITION( E_SET_DONE, GU_SET_SUCCESS, A_SECURITY_SET, S_WORKING ), +#else + SYS_FSM_STATE ( S_SETTING_PAN_ID ), + SYS_FSM_TRANSITION( E_SET_DONE, GU_SET_SUCCESS, A_RX_ON_IDLE_SET, S_WORKING ), +#endif +}; + +static const sys_fsm_const_descriptor_t m_fsm_descriptor = +{ + FSM_DEBUG_NAME("wi-art fsm") + + /* Pointer to the transition table.*/ + .transition_table = m_transition_table, + + /* Number of transitions in the transition table. */ + .transitions_amount = ARRAY_SIZE(m_transition_table), + + /* Initial state ID. */ + .initial_state = S_INITIAL, + + /* Pointer to the guard condition function */ + .guard = fsm_guard, + + /* Pointer to the action function */ + .action = fsm_action +}; + +static sys_fsm_t m_fsm; +static mlme_set_req_t * mp_set_req; +static mlme_set_conf_t m_set_conf; +static mcps_data_req_t m_data_req; +static mcps_data_conf_t m_data_conf; +static bool m_uart_tx_idle = true; +static bool m_radio_tx_idle = true; +static uint8_t m_radio_tx_buffer[PHY_MAX_PACKET_SIZE + MAC_MAX_MHR_SIZE]; +static sequence_number_t tx_sequence_number = 0; +#if (CONFIG_SECURE == 1) +static uint8_t m_radio_tx_buffer_shadow[MAX_MSDU_SIZE + MAX_APP_SEQUENCE_NUMBER_SIZE]; +#endif +static uint8_t m_events = 0; +static store_data_handler_t event_data_store[EVENTS_AMOUNT] = +{ + NULL, // E_START_CONFIG + mlme_set_conf_store, // E_SET_DONE + mcps_data_ind_store, // E_RADIO_RX_DONE + mcps_data_conf_store, // E_RADIO_TX_DONE + NULL, // E_UART_RX_DONE + NULL, // E_UART_TX_DONE + NULL, // E_SECURITY_SET +}; +static fsm_frame_item_t m_radio_rx_array[CONFIG_POOL_SIZE / (PHY_MAX_PACKET_SIZE + PHY_MAX_HEADER_SIZE) + 1U]; +static size_t m_radio_rx_array_read_index = 0; +static size_t m_radio_rx_array_write_index = 0; + +static const fsm_guard_t m_fsm_guards[] = +{ + gu_set_success, + gu_send_success, + gu_uart_tx_data_available, + gu_radio_tx_idle, + gu_uart_tx_idle, +}; + +static const fsm_action_t m_fsm_actions[] = +{ + a_channel_set, + a_short_addr_set, + a_ext_addr_set, + a_pan_id_set, + a_rx_on_idle_set, + a_config_complete, + a_radio_tx_start, + a_radio_tx_restart, + a_uart_tx_start, + a_uart_tx_idle_set, +#if (CONFIG_SECURE == 1) + a_security_set, +#endif +}; + +static void fsm_action(sys_fsm_action_id_t action_id, void * p_data) +{ + m_fsm_actions[action_id](p_data); +} + +static bool fsm_guard(sys_fsm_guard_id_t guard_id, void * p_data) +{ + return m_fsm_guards[guard_id](p_data); +} + +/* guards */ + +static bool gu_set_success(void * p_data) +{ + if (m_set_conf.status != MAC_SUCCESS) + { + ASSERT_INFO(0, "Failed to set attribute %02x\n", m_set_conf.pib_attribute.mlme_id); + return false; + } + + return true; +} + +static bool gu_send_success(void * p_data) +{ + return m_data_conf.status == MAC_SUCCESS; +} + +static bool gu_uart_tx_data_available(void * p_data) +{ + return frames_available(); +} + +static bool gu_radio_tx_idle(void * p_data) +{ + return m_radio_tx_idle; +} + +static bool gu_uart_tx_idle(void * p_data) +{ + return m_uart_tx_idle; +} + + +/* actions */ + +static void a_channel_set(void * p_data) +{ + const pib_id_t pib_id = + { + .plme_id = PHY_CURRENT_CHANNEL_ID, + }; + mp_set_req = (mlme_set_req_t *)sys_mm_alloc(sizeof(mlme_set_req_t)); + ASSERT(mp_set_req != NULL); + mp_set_req->value = (uint8_t *)sys_mm_alloc(mlme_pib_attr_size_calc(pib_id, 0)); + ASSERT(mp_set_req->value != NULL); + + uint8_t channel = CONFIG_TEST_CHANNEL; + mp_set_req->pib_attribute.plme_id = PHY_CURRENT_CHANNEL_ID; + mp_set_req->pib_attribute_idx = 0; + memcpy(mp_set_req->value, &channel, sizeof(channel)); + mlme_set_req(mp_set_req, mlme_set_conf); +} + +static void a_short_addr_set(void * p_data) +{ + const pib_id_t pib_id = + { + .mlme_id = MAC_SHORT_ADDRESS, + }; + mp_set_req = (mlme_set_req_t *)sys_mm_alloc(sizeof(mlme_set_req_t)); + ASSERT(mp_set_req != NULL); + mp_set_req->value = (uint8_t *)sys_mm_alloc(mlme_pib_attr_size_calc(pib_id, 0)); + ASSERT(mp_set_req->value != NULL); + + mp_set_req->pib_attribute.mlme_id = MAC_SHORT_ADDRESS; + uint16_t address = CONFIG_DEVICE_SHORT_ADDRESS; + memcpy(mp_set_req->value, &address, sizeof(uint16_t)); + mp_set_req->pib_attribute_idx = 0; + mlme_set_req(mp_set_req, mlme_set_conf); +} + +static void a_ext_addr_set(void * p_data) +{ + const pib_id_t pib_id = + { + .mlme_id = MAC_EXTENDED_ADDRESS, + }; + mp_set_req = (mlme_set_req_t *)sys_mm_alloc(sizeof(mlme_set_req_t)); + ASSERT(mp_set_req != NULL); + mp_set_req->value = (uint8_t *)sys_mm_alloc(mlme_pib_attr_size_calc(pib_id, 0)); + ASSERT(mp_set_req->value != NULL); + + mp_set_req->pib_attribute.mlme_id = MAC_EXTENDED_ADDRESS; + + // sum is for device address uniqueness + uint64_t address = CONFIG_IEEE_ADDRESS + CONFIG_DEVICE_SHORT_ADDRESS; + memcpy(mp_set_req->value, &address, sizeof(uint64_t)); + mp_set_req->pib_attribute_idx = 0; + mlme_set_req(mp_set_req, mlme_set_conf); +} + +static void a_pan_id_set(void * p_data) +{ + const pib_id_t pib_id = + { + .mlme_id = MAC_PAN_ID, + }; + mp_set_req = (mlme_set_req_t *)sys_mm_alloc(sizeof(mlme_set_req_t)); + ASSERT(mp_set_req != NULL); + mp_set_req->value = (uint8_t *)sys_mm_alloc(mlme_pib_attr_size_calc(pib_id, 0)); + ASSERT(mp_set_req->value != NULL); + + mp_set_req->pib_attribute.mlme_id = MAC_PAN_ID; + + uint16_t panid = CONFIG_PAN_ID; + memcpy(mp_set_req->value, &panid, sizeof(uint16_t)); + mp_set_req->pib_attribute_idx = 0; + mlme_set_req(mp_set_req, mlme_set_conf); +} + +static void a_rx_on_idle_set(void * p_data) +{ + const pib_id_t pib_id = + { + .mlme_id = MAC_RX_ON_WHEN_IDLE, + }; + mp_set_req = (mlme_set_req_t *)sys_mm_alloc(sizeof(mlme_set_req_t)); + ASSERT(mp_set_req != NULL); + mp_set_req->value = (uint8_t *)sys_mm_alloc(mlme_pib_attr_size_calc(pib_id, 0)); + ASSERT(mp_set_req->value != NULL); + + mp_set_req->pib_attribute.mlme_id = MAC_RX_ON_WHEN_IDLE; + uint8_t rx_on = 1; + memcpy(mp_set_req->value, &rx_on, sizeof(uint8_t)); + mlme_set_req(mp_set_req, mlme_set_conf); +} + +static void a_radio_tx_start(void * p_data) +{ + m_radio_tx_idle = false; + + const hal_uart_descriptor_t * p_descr = uart_descr_get(); + size_t sz = hal_uart_read_buffer_size_get(p_descr); + + LEDS_OFF(BIT(CONFIG_UPSTREAM_PIN)); + + if (sz > MAX_MSDU_SIZE) + { + sz = MAX_MSDU_SIZE; + } + + if (sz > 0) + { + hal_uart_read(p_descr, &m_radio_tx_buffer[PAYLOAD_START_POSITION], sz); + memcpy(&m_radio_tx_buffer[COUNTER_POSITION], &tx_sequence_number, MAX_APP_SEQUENCE_NUMBER_SIZE); +#if (CONFIG_SECURE == 1) + memcpy(m_radio_tx_buffer_shadow, &m_radio_tx_buffer[COUNTER_POSITION], + sz + MAX_APP_SEQUENCE_NUMBER_SIZE); +#endif + + m_data_req.dst_addr_mode = MAC_ADDR_SHORT; + m_data_req.dst_addr.short_address = CONFIG_OTHER_ADDRESS; + m_data_req.dst_pan_id = CONFIG_PAN_ID; + m_data_req.src_addr_mode = MAC_ADDR_SHORT; + m_data_req.msdu = (uint8_t *)&m_radio_tx_buffer[MAC_MAX_MHR_SIZE]; + m_data_req.msdu_length = sz + MAX_APP_SEQUENCE_NUMBER_SIZE; + m_data_req.msdu_handle++; + m_data_req.tx_options.ack = true; + m_data_req.tx_options.gts = false; + m_data_req.tx_options.indirect = false; +#if (CONFIG_SECURE == 1) + m_data_req.security_level = CONFIG_DATA_SECURITY_LEVEL; + m_data_req.key_id_mode = 0; +#endif + mcps_data_req(&m_data_req, mcps_data_conf); + + LEDS_ON(BIT(CONFIG_UPSTREAM_PIN)); + } + else + { + m_radio_tx_idle = true; + } +} + +static void a_config_complete(void * p_data) +{ + LEDS_ON(BIT(CONFIG_INIT_DONE_PIN)); +} + +static void a_radio_tx_restart(void * p_data) +{ +#if (CONFIG_SECURE == 1) + /** This is necessary because data in m_radio_tx_buffer had been already ciphered. */ + memcpy(&m_radio_tx_buffer[COUNTER_POSITION], m_radio_tx_buffer_shadow, m_data_req.msdu_length); +#endif + m_data_req.msdu_handle++; + mcps_data_req(&m_data_req, mcps_data_conf); + LEDS_ON(BIT(CONFIG_UPSTREAM_PIN)); +} + +static bool frames_available(void) +{ + return m_radio_rx_array_read_index != m_radio_rx_array_write_index; +} + +static void frame_store(fsm_frame_item_t * p_frame) +{ + m_radio_rx_array[m_radio_rx_array_write_index++] = *p_frame; + if (m_radio_rx_array_write_index == ARRAY_SIZE(m_radio_rx_array)) + { + m_radio_rx_array_write_index = 0; + } + ASSERT(frames_available()); +} + +static fsm_frame_item_t * next_frame_get(void) +{ + ASSERT(frames_available()); + fsm_frame_item_t * result = &m_radio_rx_array[m_radio_rx_array_read_index++]; + if (m_radio_rx_array_read_index == ARRAY_SIZE(m_radio_rx_array)) + { + m_radio_rx_array_read_index = 0; + } + return result; +} + +static void a_uart_tx_start(void * p_data) +{ + ASSERT(frames_available()); + + fsm_frame_item_t * p_fsm_frame = next_frame_get(); + const hal_uart_descriptor_t * p_uart_descr = uart_descr_get(); + + hal_uart_write(p_uart_descr, + p_fsm_frame->payload_descr.p_payload + MAX_APP_SEQUENCE_NUMBER_SIZE, + p_fsm_frame->length - MAX_APP_SEQUENCE_NUMBER_SIZE); + + mac_mem_msdu_free(&p_fsm_frame->payload_descr); + + m_uart_tx_idle = false; + + LEDS_ON(BIT(CONFIG_DOWNSTREAM_PIN)); + + (void)p_data; +} + +static void a_uart_tx_idle_set(void * p_data) +{ + m_uart_tx_idle = true; +} + +#if (CONFIG_SECURE == 1) +static void a_security_set(void * p_data) +{ + security_tables_init(); + fsm_event_post(E_SECURITY_SET, NULL); +} +#endif + + +/* callback functions */ + +static void mlme_set_conf(mlme_set_conf_t * conf) +{ + fsm_event_data_t data = + { + .mlme_set = conf, + }; + fsm_event_post(E_SET_DONE, &data); + + sys_mm_free(mp_set_req->value); + sys_mm_free(mp_set_req); +} + +static void mcps_data_conf(mcps_data_conf_t * conf) +{ + fsm_event_data_t data = + { + .mcps_data_conf = conf + }; + if (conf->status == MAC_SUCCESS) + { + tx_sequence_number++; + } + fsm_event_post(E_RADIO_TX_DONE, &data); + LEDS_OFF(BIT(CONFIG_UPSTREAM_PIN)); +} + + +/* storing functions */ + +static void mlme_set_conf_store(fsm_event_data_t * p_data) +{ + if (p_data != NULL) + { + m_set_conf = *p_data->mlme_set; + } +} + +static void mcps_data_ind_store(fsm_event_data_t * p_data) +{ + mcps_data_ind_t * p_frame = p_data->mcps_data_ind; + fsm_frame_item_t fsm_frame; + + fsm_frame.payload_descr = p_frame->msdu; + fsm_frame.length = p_frame->msdu_length; + frame_store(&fsm_frame); +} + +static void mcps_data_conf_store(fsm_event_data_t * p_data) +{ + m_data_conf = *p_data->mcps_data_conf; +} + +/* interface functions */ + +void fsm_init(void) +{ + sys_fsm_init(&m_fsm, &m_fsm_descriptor); + m_radio_rx_array_read_index = 0; + m_radio_rx_array_write_index = 0; +} + +void fsm_event_post(fsm_events_t event, fsm_event_data_t * p_data) +{ + m_events |= BIT(event); + if (event_data_store[event] != NULL) + { + event_data_store[event](p_data); + } + + sys_task_post(APP_TASK_ID); +} + +void fsm_event_scheduler_run(void) +{ + for (uint8_t event_id = 0; event_id < EVENTS_AMOUNT; event_id++) + { + uint8_t mask = BIT(event_id); + if (m_events & mask) + { + m_events ^= mask; + sys_fsm_event_post(&m_fsm, (fsm_events_t)event_id, NULL); + } + } + + if (m_events) + { + sys_task_post(APP_TASK_ID); + } +} + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/fsm.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/fsm.h new file mode 100644 index 0000000..2bd1ece --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/fsm.h @@ -0,0 +1,79 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef FSM_H_INCLUDED +#define FSM_H_INCLUDED + +#include <stdint.h> +#include "mac_mlme_pib.h" +#include "mac_mcps_data.h" + +typedef uint8_t sequence_number_t; +#define MAX_APP_SEQUENCE_NUMBER_SIZE sizeof(sequence_number_t) +#define MAX_MSDU_SIZE (PHY_MAX_PACKET_SIZE - MAC_MEMORY_RESERVE - MAX_APP_SEQUENCE_NUMBER_SIZE) +#define PAYLOAD_START_POSITION (MAC_MAX_MHR_SIZE + MAX_APP_SEQUENCE_NUMBER_SIZE) +#define COUNTER_POSITION (MAC_MAX_MHR_SIZE) + +typedef enum +{ + E_START_CONFIG, + E_SET_DONE, + E_RADIO_RX_DONE, + E_RADIO_TX_DONE, + E_UART_RX_DONE, + E_UART_TX_DONE, + E_SECURITY_SET, + EVENTS_AMOUNT +} fsm_events_t; + +typedef union +{ + mlme_set_conf_t * mlme_set; + mcps_data_ind_t * mcps_data_ind; + mcps_data_conf_t * mcps_data_conf; +} fsm_event_data_t; + + +void fsm_init(void); +void fsm_event_post(fsm_events_t event, fsm_event_data_t * p_data); +void fsm_event_scheduler_run(void); + +#endif /* FSM_H_INCLUDED */ diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/main.c new file mode 100644 index 0000000..1af6b14 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/main.c @@ -0,0 +1,191 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "config.h" +#include "ral_irq_handlers.h" +#include "nrf_log.h" +#include "nrf_log_ctrl.h" +#include "nrf_log_default_backends.h" + +#include "nrf_drv_clock.h" + +#include "fsm.h" +#include "uart.h" +#include "mac_mcps_data.h" +#include "sys_init.h" +#include "sys_task_scheduler.h" +#include "boards.h" + +static uint8_t __ALIGN(ALIGN_VALUE) m_heap[CONFIG_POOL_SIZE]; +static const size_t m_heap_size = CONFIG_POOL_SIZE; + +static void out_of_memory_callback(const void * data); +static void memory_freed_callback(const void * data); + +static sys_event_desc_t m_out_of_memory_desc = +{ + .event_id = SYS_EVENT_OUT_OF_MEMORY, + .callback = out_of_memory_callback, +}; + +static sys_event_desc_t m_memory_freed_desc = +{ + .event_id = SYS_EVENT_MEMORY_FREED, + .callback = memory_freed_callback, +}; + +void mcps_data_ind(mcps_data_ind_t * p_ind) +{ + static uint8_t app_rx_counter = 0; + static bool first_frame = true; + sequence_number_t next_counter_val = app_rx_counter + 1; + sequence_number_t rx_counter = 0; + + bool addresses_match = p_ind->dst_pan_id == CONFIG_PAN_ID && + p_ind->dst_addr_mode == MAC_ADDR_SHORT && + p_ind->dst_addr.short_address == CONFIG_DEVICE_SHORT_ADDRESS && + p_ind->src_pan_id == CONFIG_PAN_ID && + p_ind->src_addr_mode == MAC_ADDR_SHORT && + p_ind->src_addr.short_address == CONFIG_OTHER_ADDRESS; + + rx_counter = p_ind->msdu.p_payload[0]; + if ((rx_counter != app_rx_counter || first_frame) && addresses_match && (p_ind->msdu_length > 0)) + { + if (first_frame == false) + { + ASSERT_INFO(next_counter_val == rx_counter,"Number of lost frames: %d", rx_counter - next_counter_val); + (void)next_counter_val; + } + first_frame = false; + + app_rx_counter = rx_counter; + + fsm_event_data_t data = + { + .mcps_data_ind = p_ind, + }; + fsm_event_post(E_RADIO_RX_DONE, &data); + } + else + { + mac_mem_msdu_free(&p_ind->msdu); + } +} + +static void out_of_memory_callback(const void * data) +{ + LEDS_ON(BIT(CONFIG_ERROR_PIN)); +} + +static void memory_freed_callback(const void * data) +{ + LEDS_OFF(BIT(CONFIG_ERROR_PIN)); +} + +/**@brief Application task initialization for GPIO test. + */ +static void app_task_init(void) +{ + LEDS_CONFIGURE(LEDS_MASK); + LEDS_OFF(LEDS_MASK); + + sys_init(m_heap, m_heap_size); + + sys_event_subscribe(&m_out_of_memory_desc); + sys_event_subscribe(&m_memory_freed_desc); + + uart_init(); + fsm_init(); + fsm_event_post(E_START_CONFIG, NULL); +} + +/**@brief Application task handler for GPIO test. + */ +void app_task_handler(void) +{ + fsm_event_scheduler_run(); +} + +static void clock_init(void) +{ + ret_code_t err_code = nrf_drv_clock_init(); + ASSERT((err_code == NRF_SUCCESS) || (err_code == NRF_ERROR_MODULE_ALREADY_INITIALIZED)); + + nrf_drv_clock_hfclk_request(NULL); + while (!nrf_drv_clock_hfclk_is_running()) + { + // spin lock + } + + nrf_drv_clock_lfclk_request(NULL); + while (!nrf_drv_clock_lfclk_is_running()) + { + // spin lock + } +} + +/** + * @brief Function for application main entry. + */ +int main(void) +{ + ral_irq_handler_import(); + APP_ERROR_CHECK(NRF_LOG_INIT(NULL)); + NRF_LOG_DEFAULT_BACKENDS_INIT(); + NRF_LOG_INFO("Wireless UART example started."); + + app_task_init(); + sys_task_post(APP_TASK_ID); + + clock_init(); + + while (true) + { + sys_task_run(); + } +} + +/* This is a workaround against IAR printf linkage behavior */ +size_t __write(int handle, const unsigned char * buf, size_t buf_size) +{ + return buf_size; +} + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm4/wireless_uart_raw_first_pca10056.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm4/wireless_uart_raw_first_pca10056.uvopt new file mode 100644 index 0000000..6790765 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm4/wireless_uart_raw_first_pca10056.uvopt @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> <OPTFL> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> <DebugOpt> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm4/wireless_uart_raw_first_pca10056.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm4/wireless_uart_raw_first_pca10056.uvproj new file mode 100644 index 0000000..eef1c42 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm4/wireless_uart_raw_first_pca10056.uvproj @@ -0,0 +1,527 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd"> + + <SchemaVersion>1.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> + <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>core.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>0</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <RoSelD>3</RoSelD> + <RwSelD>5</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls>--c99 --reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x00000000</DataAddressRange> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>None</GroupName> + <Files> <File> + <FileName>arm_startup_nrf52840.s</FileName> + <FileType>2</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52840.s</FilePath> </File> <File> + <FileName>system_nrf52840.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\raw\802_15_4_lib_keil.lib</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets> + +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm5_no_packs/wireless_uart_raw_first_pca10056.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm5_no_packs/wireless_uart_raw_first_pca10056.uvoptx new file mode 100644 index 0000000..6a025f0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm5_no_packs/wireless_uart_raw_first_pca10056.uvoptx @@ -0,0 +1,115 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>65535</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\_build\</ListingPath> + </OPTLEX> + <CpuCode>0</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>0</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <tPdscDbg>1</tPdscDbg> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <nTsel>7</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52840_xxAA$Flash\nrf52xxx_uicr.flm)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx))</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm5_no_packs/wireless_uart_raw_first_pca10056.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm5_no_packs/wireless_uart_raw_first_pca10056.uvprojx new file mode 100644 index 0000000..0e493ca --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/arm5_no_packs/wireless_uart_raw_first_pca10056.uvprojx @@ -0,0 +1,551 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + + <SchemaVersion>2.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID> + <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL> <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll></FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + <RestoreSysVw>1</RestoreSysVw> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + <RestoreSysVw>1</RestoreSysVw> <UsePdscDebugDescription>1</UsePdscDebugDescription> </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <useXO>0</useXO> + <v6Lang>0</v6Lang> + <v6LangP>0</v6LangP> + <vShortEn>0</vShortEn> + <vShortWch>0</vShortWch> + <VariousControls> + <MiscControls>--reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase></pXoBase> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\raw\802_15_4_lib_keil.lib</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets><RTE> + <packages> + <filter> + <targetInfos/> + </filter> <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> </packages> + <apis/> + <components> <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core"> + <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> + <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device"> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> </components> + <files> </files> +</RTE> +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/armgcc/Makefile new file mode 100644 index 0000000..acb4a2f --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/armgcc/Makefile @@ -0,0 +1,173 @@ +PROJECT_NAME := wireless_uart_raw_first_pca10056 +TARGETS := nrf52840_xxaa +OUTPUT_DIRECTORY := _build + +SDK_ROOT := ../../../../../../../.. +PROJ_DIR := ../../.. + +$(OUTPUT_DIRECTORY)/nrf52840_xxaa.out: \ + LINKER_SCRIPT := wireless_uart_raw_first_gcc_nrf52.ld + +# Source files common to all targets +SRC_FILES += \ + $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52840.S \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \ + $(SDK_ROOT)/components/libraries/util/app_error.c \ + $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ + $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ + $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ + $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ + $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \ + $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \ + $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \ + $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ + $(SDK_ROOT)/components/boards/boards.c \ + $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ + $(SDK_ROOT)/modules/nrfx/hal/nrf_ecb.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ + $(PROJ_DIR)/../../assert.c \ + $(PROJ_DIR)/../../fsm.c \ + $(PROJ_DIR)/../../main.c \ + $(PROJ_DIR)/../../security.c \ + $(PROJ_DIR)/../../uart.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \ + $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52840.c \ + +# Include folders common to all targets +INC_FOLDERS += \ + $(SDK_ROOT)/integration/nrfx \ + $(SDK_ROOT)/components/802_15_4/api/RAL \ + $(SDK_ROOT)/components/libraries/experimental_log/src \ + $(SDK_ROOT)/components/802_15_4/api/SysAL \ + ../config \ + $(SDK_ROOT)/components/libraries/experimental_section_vars \ + $(SDK_ROOT)/components/802_15_4/api/HAL/nrf52_soc \ + $(SDK_ROOT)/modules/nrfx/mdk \ + $(SDK_ROOT)/components/libraries/strerror \ + $(SDK_ROOT)/components/boards \ + $(SDK_ROOT)/components/802_15_4/api/HAL \ + $(SDK_ROOT)/components/libraries/experimental_memobj \ + $(SDK_ROOT)/components/802_15_4/raw \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ + $(SDK_ROOT)/modules/nrfx/hal \ + $(SDK_ROOT)/components/802_15_4/api/PHY \ + $(SDK_ROOT)/modules/nrfx/drivers/include \ + $(SDK_ROOT)/components/802_15_4 \ + $(SDK_ROOT)/external/fprintf \ + $(SDK_ROOT)/components/802_15_4/api/MAC \ + $(SDK_ROOT)/components/libraries/balloc \ + $(SDK_ROOT)/components/libraries/util \ + $(SDK_ROOT)/modules/nrfx \ + $(SDK_ROOT)/external/segger_rtt \ + $(SDK_ROOT)/integration/nrfx/legacy \ + $(SDK_ROOT)/components/libraries/experimental_log \ + $(PROJ_DIR)/../.. \ + $(SDK_ROOT)/components/libraries/atomic \ + $(SDK_ROOT)/components/libraries/delay \ + $(SDK_ROOT)/components/802_15_4/api/SecAL \ + $(SDK_ROOT)/components/toolchain/cmsis/include \ + $(SDK_ROOT)/components/802_15_4/api/RAL/nrf52_soc \ + +# Libraries common to all targets +LIB_FILES += \ + $(SDK_ROOT)/components/802_15_4/raw/802_15_4_lib_gcc.a \ + +# Optimization flags +OPT = -O3 -g3 +# Uncomment the line below to enable link time optimization +#OPT += -flto + +# C flags common to all targets +CFLAGS += $(OPT) +CFLAGS += -DBOARD_PCA10056 +CFLAGS += -DCONFIG_GPIO_AS_PINRESET +CFLAGS += -DFLOAT_ABI_HARD +CFLAGS += -DNRF52840_XXAA +CFLAGS += -DRETARGET_ENABLED=1 +CFLAGS += -mcpu=cortex-m4 +CFLAGS += -mthumb -mabi=aapcs +CFLAGS += -Wall -Werror +CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# keep every function in a separate section, this allows linker to discard unused ones +CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing +CFLAGS += -fno-builtin -fshort-enums + +# C++ flags common to all targets +CXXFLAGS += $(OPT) + +# Assembler flags common to all targets +ASMFLAGS += -g3 +ASMFLAGS += -mcpu=cortex-m4 +ASMFLAGS += -mthumb -mabi=aapcs +ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +ASMFLAGS += -DBOARD_PCA10056 +ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET +ASMFLAGS += -DFLOAT_ABI_HARD +ASMFLAGS += -DNRF52840_XXAA +ASMFLAGS += -DRETARGET_ENABLED=1 + +# Linker flags +LDFLAGS += $(OPT) +LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) +LDFLAGS += -mcpu=cortex-m4 +LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# let linker dump unused sections +LDFLAGS += -Wl,--gc-sections +# use newlib in nano version +LDFLAGS += --specs=nano.specs + +nrf52840_xxaa: CFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: CFLAGS += -D__STACK_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__STACK_SIZE=8192 + +# Add standard libraries at the very end of the linker input, after all objects +# that may need symbols provided by these libraries. +LIB_FILES += -lc -lnosys -lm + + +.PHONY: default help + +# Default target - first one defined +default: nrf52840_xxaa + +# Print all targets that can be built +help: + @echo following targets are available: + @echo nrf52840_xxaa + @echo sdk_config - starting external tool for editing sdk_config.h + @echo flash - flashing binary + +TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc + + +include $(TEMPLATE_PATH)/Makefile.common + +$(foreach target, $(TARGETS), $(call define_target, $(target))) + +.PHONY: flash erase + +# Flash the program +flash: $(OUTPUT_DIRECTORY)/nrf52840_xxaa.hex + @echo Flashing: $< + nrfjprog -f nrf52 --program $< --sectorerase + nrfjprog -f nrf52 --reset + +erase: + nrfjprog -f nrf52 --eraseall + +SDK_CONFIG_FILE := ../config/sdk_config.h +CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar +sdk_config: + java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/armgcc/wireless_uart_raw_first_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/armgcc/wireless_uart_raw_first_gcc_nrf52.ld new file mode 100644 index 0000000..8eec923 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/armgcc/wireless_uart_raw_first_gcc_nrf52.ld @@ -0,0 +1,51 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x100000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 +} + +SECTIONS +{ +} + +SECTIONS +{ + . = ALIGN(4); + .mem_section_dummy_ram : + { + } + .log_dynamic_data : + { + PROVIDE(__start_log_dynamic_data = .); + KEEP(*(SORT(.log_dynamic_data*))) + PROVIDE(__stop_log_dynamic_data = .); + } > RAM + +} INSERT AFTER .data; + +SECTIONS +{ + .mem_section_dummy_rom : + { + } + .log_const_data : + { + PROVIDE(__start_log_const_data = .); + KEEP(*(SORT(.log_const_data*))) + PROVIDE(__stop_log_const_data = .); + } > FLASH + .nrf_balloc : + { + PROVIDE(__start_nrf_balloc = .); + KEEP(*(.nrf_balloc)) + PROVIDE(__stop_nrf_balloc = .); + } > FLASH + +} INSERT AFTER .text + +INCLUDE "nrf_common.ld" diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/config/sdk_config.h new file mode 100644 index 0000000..657d479 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/config/sdk_config.h @@ -0,0 +1,2826 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> Application + +//========================================================== +// <o> CONFIG_DEVICE_SHORT_ADDRESS - Device short address +#ifndef CONFIG_DEVICE_SHORT_ADDRESS +#define CONFIG_DEVICE_SHORT_ADDRESS 10 +#endif + +// <o> CONFIG_OTHER_ADDRESS - Peer device short address +#ifndef CONFIG_OTHER_ADDRESS +#define CONFIG_OTHER_ADDRESS 11 +#endif + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// </e> + +// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend +//========================================================== +#ifndef NRF_LOG_BACKEND_RTT_ENABLED +#define NRF_LOG_BACKEND_RTT_ENABLED 1 +#endif +// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// <i> Size of the buffer is a trade-off between RAM usage and processing. +// <i> if buffer is smaller then strings will often be fragmented. +// <i> It is recommended to use size which will fit typical log and only the +// <i> longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS +#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. +// <i> If RTT fails to accept any new data after retries +// <i> module assumes that host is not active and on next +// <i> request it will perform only one write attempt. +// <i> On successful writing, module assumes that host is active +// <i> and scheme with retry is applied again. + +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT +#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 +#endif + +// </e> + +// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 1 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 0 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Segger_RTT + +//========================================================== +// <h> segger_rtt - SEGGER RTT + +//========================================================== +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// <i> or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// <i> The following modes are supported: +// <i> - SKIP - Do not block, output nothing. +// <i> - TRIM - Do not block, output as much as fits. +// <i> - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_iar_nRF5x.icf new file mode 100644 index 0000000..8e25f22 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_iar_nRF5x.icf @@ -0,0 +1,36 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x0; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x0; +define symbol __ICFEDIT_region_ROM_end__ = 0xfffff; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003ffff; +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 8192; +define symbol __ICFEDIT_size_heap__ = 8192; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; +define block RO_END with alignment = 8, size = 0 { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly, + block RO_END }; +place in RAM_region { readwrite, + block CSTACK, + block HEAP }; + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_pca10056.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_pca10056.ewd new file mode 100644 index 0000000..a846fea --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_pca10056.ewd @@ -0,0 +1,1350 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>26</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52840_xxaa.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>1</state> + </option> + <option> + <name>CExtraOptions</name> + <state>--drv_vector_table_base=0x0</state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>JLINK_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>0</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52840_xxaa.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>IjetAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>15</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCXDS100AttachSlave</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>CCXds100InterfaceList</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_pca10056.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_pca10056.ewp new file mode 100644 index 0000000..430a999 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/iar/wireless_uart_raw_first_pca10056.ewp @@ -0,0 +1,1062 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>22</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>ExePath</name> + <state>_build</state> + </option> + <option> + <name>ObjPath</name> + <state>_build</state> + </option> + <option> + <name>ListPath</name> + <state>_build</state> + </option> + <option> + <name>Variant</name> + <version>20</version> + <state>34</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>1</state> + </option> + <option> + <name>Input description</name> + <state>Full formatting.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>Output description</name> + <state>Full formatting.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>5</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>6.10.3.52260</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>nrf52840_xxaa nRF52840_xxAA</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>0</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>0</state> + </option> + <option> + <name>GRuntimeLibThreads</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>31</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCGuardCalls</name> + <state>1</state> + </option> + <option> + <name>CCOptimizationNoSizeConstraints</name> + <state>0</state> + </option> + <option> + <name>CCDefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>1</version> + <state>11111110</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>0</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>1</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\raw</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + <option> + <name>IccFloatSemantics</name> + <state>0</state> + </option> + <option> + <name>CCNoLiteralPool</name> + <state>0</state> + </option> + <option> + <name>CCOptStrategySlave</name> + <version>0</version> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>9</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state></state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\raw</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + <option> + <name>AsmNoLiteralPool</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>1</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>wireless_uart_raw_first_pca10056.hex</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkOutputFile</name> + <state>wireless_uart_raw_first_pca10056.out</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>1</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$\wireless_uart_raw_first_iar_nRF5x.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>1</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>0</state> + </option> + <option> + <name>IlinkExtraOptions</name> + <state></state> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + <option> + <name>IlinkOptMergeDuplSections</name> + <state>0</state> + </option> + <option> + <name>IlinkOptUseVfe</name> + <state>1</state> + </option> + <option> + <name>IlinkOptForceVfe</name> + <state>0</state> + </option> + <option> + <name>IlinkStackAnalysisEnable</name> + <state>0</state> + </option> + <option> + <name>IlinkStackControlFile</name> + <state></state> + </option> + <option> + <name>IlinkStackCallGraphFile</name> + <state></state> + </option> + <option> + <name>CrcAlgorithm</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcUnitSize</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IlinkThreadsSlave</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + </configuration> <group> + <name>nRF_Log</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name> </file> </group> <group> + <name>nRF_Libraries</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name> </file> </group> <group> + <name>nRF_802_15_4</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\raw\802_15_4_lib_iar.a</name> </file> </group> <group> + <name>Board Definition</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name> </file> </group> <group> + <name>nRF_Drivers</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name> </file> </group> <group> + <name>Application</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\fsm.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\main.c</name> </file> <file> + <name>$PROJ_DIR$\..\config\sdk_config.h</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\security.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\uart.c</name> </file> </group> <group> + <name>nRF_Segger_RTT</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name> </file> </group> <group> + <name>None</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52840.s</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</name> </file> </group></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/flash_placement.xml new file mode 100644 index 0000000..42d7b71 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/flash_placement.xml @@ -0,0 +1,35 @@ +<!DOCTYPE Linker_Placement_File> +<Root name="Flash Section Placement"> + <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)"> + <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" /> + <ProgramSection alignment="4" load="Yes" name=".init" /> + <ProgramSection alignment="4" load="Yes" name=".init_rodata" /> + <ProgramSection alignment="4" load="Yes" name=".text" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data" inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/> + <ProgramSection alignment="4" load="Yes" name=".dtors" /> + <ProgramSection alignment="4" load="Yes" name=".ctors" /> + <ProgramSection alignment="4" load="Yes" name=".rodata" /> + <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" /> + <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" /> + <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" /> + <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" /> + </MemorySegment> + <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)"> + <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" /> + <ProgramSection alignment="4" load="No" name=".fast_run" /> + <ProgramSection alignment="4" load="No" name=".data_run" /> + <ProgramSection alignment="4" load="No" name=".tdata_run" /> + <ProgramSection alignment="4" load="No" name=".bss" /> + <ProgramSection alignment="4" load="No" name=".tbss" /> + <ProgramSection alignment="4" load="No" name=".non_init" /> + <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" /> + <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" address_symbol="__StackLimit" end_symbol="__StackTop"/> + <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" /> + </MemorySegment> +</Root> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/wireless_uart_raw_first_pca10056.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/wireless_uart_raw_first_pca10056.emProject new file mode 100644 index 0000000..ca6da92 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/wireless_uart_raw_first_pca10056.emProject @@ -0,0 +1,95 @@ +<!DOCTYPE CrossStudio_Project_File> +<solution Name="wireless_uart_raw_first_pca10056" target="8" version="2"> + <project Name="wireless_uart_raw_first_pca10056"> + <configuration + Name="Common" + arm_architecture="v7EM" + arm_core_type="Cortex-M4" + arm_endian="Little" + arm_fp_abi="Hard" + arm_fpu_type="FPv4-SP-D16" + arm_linker_heap_size="8192" + arm_linker_process_stack_size="0" + arm_linker_stack_size="8192" + arm_linker_treat_warnings_as_errors="No" + arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD" + arm_target_device_name="nRF52840_xxAA" + arm_target_interface_type="SWD" + c_user_include_directories="../../../config;../../../../../../../../components/802_15_4;../../../../../../../../components/802_15_4/api/HAL;../../../../../../../../components/802_15_4/api/HAL/nrf52_soc;../../../../../../../../components/802_15_4/api/MAC;../../../../../../../../components/802_15_4/api/PHY;../../../../../../../../components/802_15_4/api/RAL;../../../../../../../../components/802_15_4/api/RAL/nrf52_soc;../../../../../../../../components/802_15_4/api/SecAL;../../../../../../../../components/802_15_4/api/SysAL;../../../../../../../../components/802_15_4/raw;../../../../../../../../components/boards;../../../../../../../../components/drivers_nrf/nrf_soc_nosd;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/util;../../../../../../../../components/toolchain/cmsis/include;../../../../..;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;" + c_preprocessor_definitions="BOARD_PCA10056;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52840_XXAA;RETARGET_ENABLED=1;" + debug_target_connection="J-Link" + gcc_entry_point="Reset_Handler" + macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar" + debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52840.svd" + debug_start_from_entry_point_symbol="No" + gcc_debugging_level="Level 3" linker_output_format="hex" + linker_printf_width_precision_supported="Yes" + linker_printf_fmt_level="long" + linker_section_placement_file="flash_placement.xml" + linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x100000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x40000;FLASH_START=0x0;FLASH_SIZE=0x100000;RAM_START=0x20000000;RAM_SIZE=0x40000" + linker_section_placements_segments="FLASH RX 0x0 0x100000;RAM RWX 0x20000000 0x40000" + project_directory="" + project_type="Executable" /> + <folder Name="Segger Startup Files"> + <file file_name="$(StudioDir)/source/thumb_crt0.s" /> + </folder> + <folder Name="nRF_Log"> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" /> + </folder> + <folder Name="nRF_Libraries"> + <file file_name="../../../../../../../../components/libraries/util/app_error.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" /> + <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" /> + <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" /> + <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" /> + <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" /> + </folder> + <folder Name="nRF_802_15_4"> + <file file_name="../../../../../../../../components/802_15_4/raw/802_15_4_lib_gcc.a" /> + </folder> + <folder Name="Board Definition"> + <file file_name="../../../../../../../../components/boards/boards.c" /> + </folder> + <folder Name="nRF_Drivers"> + <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/hal/nrf_ecb.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" /> + </folder> + <folder Name="Application"> + <file file_name="../../../../../assert.c" /> + <file file_name="../../../../../fsm.c" /> + <file file_name="../../../../../main.c" /> + <file file_name="../config/sdk_config.h" /> + <file file_name="../../../../../security.c" /> + <file file_name="../../../../../uart.c" /> + </folder> + <folder Name="nRF_Segger_RTT"> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" /> + </folder> + <folder Name="None"> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52840_Vectors.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52840.c" /> + </folder> + </project> + <configuration Name="Release" + c_preprocessor_definitions="NDEBUG" + gcc_optimization_level="Optimize For Size" /> + <configuration Name="Debug" + c_preprocessor_definitions="DEBUG; DEBUG_NRF" + gcc_optimization_level="None"/> +</solution> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/wireless_uart_raw_first_pca10056.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/wireless_uart_raw_first_pca10056.emSession new file mode 100644 index 0000000..5b9aa82 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/pca10056/blank/ses/wireless_uart_raw_first_pca10056.emSession @@ -0,0 +1,7 @@ +<!DOCTYPE CrossStudio_Session_File> +<session> + <ARMCrossStudioWindow activeProject="wireless_uart_raw_first_pca10056" buildConfiguration="Release"/> + <Files> + <SessionOpenFile codecName="Default" debugPath="../../../../../main.c" left="0" name="unnamed" path="../../../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/> + </Files> +</session>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/wireless_uart_raw_first.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/wireless_uart_raw_first.eww new file mode 100644 index 0000000..fa86133 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/first/wireless_uart_raw_first.eww @@ -0,0 +1,6 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<workspace> <project> + <path>$WS_DIR$\pca10056\blank\iar\wireless_uart_raw_first_pca10056.ewp</path> + </project> <batchBuild/> +</workspace>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm4/wireless_uart_raw_second_pca10056.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm4/wireless_uart_raw_second_pca10056.uvopt new file mode 100644 index 0000000..6790765 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm4/wireless_uart_raw_second_pca10056.uvopt @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> <OPTFL> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> <DebugOpt> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm4/wireless_uart_raw_second_pca10056.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm4/wireless_uart_raw_second_pca10056.uvproj new file mode 100644 index 0000000..eef1c42 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm4/wireless_uart_raw_second_pca10056.uvproj @@ -0,0 +1,527 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd"> + + <SchemaVersion>1.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> + <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>core.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>0</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <RoSelD>3</RoSelD> + <RwSelD>5</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls>--c99 --reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x00000000</DataAddressRange> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>None</GroupName> + <Files> <File> + <FileName>arm_startup_nrf52840.s</FileName> + <FileType>2</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52840.s</FilePath> </File> <File> + <FileName>system_nrf52840.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\raw\802_15_4_lib_keil.lib</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets> + +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm5_no_packs/wireless_uart_raw_second_pca10056.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm5_no_packs/wireless_uart_raw_second_pca10056.uvoptx new file mode 100644 index 0000000..6a025f0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm5_no_packs/wireless_uart_raw_second_pca10056.uvoptx @@ -0,0 +1,115 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>65535</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\_build\</ListingPath> + </OPTLEX> + <CpuCode>0</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>0</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <tPdscDbg>1</tPdscDbg> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <nTsel>7</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52840_xxAA$Flash\nrf52xxx_uicr.flm)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx))</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm5_no_packs/wireless_uart_raw_second_pca10056.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm5_no_packs/wireless_uart_raw_second_pca10056.uvprojx new file mode 100644 index 0000000..0e493ca --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/arm5_no_packs/wireless_uart_raw_second_pca10056.uvprojx @@ -0,0 +1,551 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + + <SchemaVersion>2.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID> + <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL> <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll></FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + <RestoreSysVw>1</RestoreSysVw> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + <RestoreSysVw>1</RestoreSysVw> <UsePdscDebugDescription>1</UsePdscDebugDescription> </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <useXO>0</useXO> + <v6Lang>0</v6Lang> + <v6LangP>0</v6LangP> + <vShortEn>0</vShortEn> + <vShortWch>0</vShortWch> + <VariousControls> + <MiscControls>--reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\raw;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase></pXoBase> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\raw\802_15_4_lib_keil.lib</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets><RTE> + <packages> + <filter> + <targetInfos/> + </filter> <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> </packages> + <apis/> + <components> <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core"> + <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> + <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device"> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> </components> + <files> </files> +</RTE> +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/armgcc/Makefile new file mode 100644 index 0000000..0e2b13e --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/armgcc/Makefile @@ -0,0 +1,173 @@ +PROJECT_NAME := wireless_uart_raw_second_pca10056 +TARGETS := nrf52840_xxaa +OUTPUT_DIRECTORY := _build + +SDK_ROOT := ../../../../../../../.. +PROJ_DIR := ../../.. + +$(OUTPUT_DIRECTORY)/nrf52840_xxaa.out: \ + LINKER_SCRIPT := wireless_uart_raw_second_gcc_nrf52.ld + +# Source files common to all targets +SRC_FILES += \ + $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52840.S \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \ + $(SDK_ROOT)/components/libraries/util/app_error.c \ + $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ + $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ + $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ + $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ + $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \ + $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \ + $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \ + $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ + $(SDK_ROOT)/components/boards/boards.c \ + $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ + $(SDK_ROOT)/modules/nrfx/hal/nrf_ecb.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ + $(PROJ_DIR)/../../assert.c \ + $(PROJ_DIR)/../../fsm.c \ + $(PROJ_DIR)/../../main.c \ + $(PROJ_DIR)/../../security.c \ + $(PROJ_DIR)/../../uart.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \ + $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52840.c \ + +# Include folders common to all targets +INC_FOLDERS += \ + $(SDK_ROOT)/integration/nrfx \ + $(SDK_ROOT)/components/802_15_4/api/RAL \ + $(SDK_ROOT)/components/libraries/experimental_log/src \ + $(SDK_ROOT)/components/802_15_4/api/SysAL \ + ../config \ + $(SDK_ROOT)/components/libraries/experimental_section_vars \ + $(SDK_ROOT)/components/802_15_4/api/HAL/nrf52_soc \ + $(SDK_ROOT)/modules/nrfx/mdk \ + $(SDK_ROOT)/components/libraries/strerror \ + $(SDK_ROOT)/components/boards \ + $(SDK_ROOT)/components/802_15_4/api/HAL \ + $(SDK_ROOT)/components/libraries/experimental_memobj \ + $(SDK_ROOT)/components/802_15_4/raw \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ + $(SDK_ROOT)/modules/nrfx/hal \ + $(SDK_ROOT)/components/802_15_4/api/PHY \ + $(SDK_ROOT)/modules/nrfx/drivers/include \ + $(SDK_ROOT)/components/802_15_4 \ + $(SDK_ROOT)/external/fprintf \ + $(SDK_ROOT)/components/802_15_4/api/MAC \ + $(SDK_ROOT)/components/libraries/balloc \ + $(SDK_ROOT)/components/libraries/util \ + $(SDK_ROOT)/modules/nrfx \ + $(SDK_ROOT)/external/segger_rtt \ + $(SDK_ROOT)/integration/nrfx/legacy \ + $(SDK_ROOT)/components/libraries/experimental_log \ + $(PROJ_DIR)/../.. \ + $(SDK_ROOT)/components/libraries/atomic \ + $(SDK_ROOT)/components/libraries/delay \ + $(SDK_ROOT)/components/802_15_4/api/SecAL \ + $(SDK_ROOT)/components/toolchain/cmsis/include \ + $(SDK_ROOT)/components/802_15_4/api/RAL/nrf52_soc \ + +# Libraries common to all targets +LIB_FILES += \ + $(SDK_ROOT)/components/802_15_4/raw/802_15_4_lib_gcc.a \ + +# Optimization flags +OPT = -O3 -g3 +# Uncomment the line below to enable link time optimization +#OPT += -flto + +# C flags common to all targets +CFLAGS += $(OPT) +CFLAGS += -DBOARD_PCA10056 +CFLAGS += -DCONFIG_GPIO_AS_PINRESET +CFLAGS += -DFLOAT_ABI_HARD +CFLAGS += -DNRF52840_XXAA +CFLAGS += -DRETARGET_ENABLED=1 +CFLAGS += -mcpu=cortex-m4 +CFLAGS += -mthumb -mabi=aapcs +CFLAGS += -Wall -Werror +CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# keep every function in a separate section, this allows linker to discard unused ones +CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing +CFLAGS += -fno-builtin -fshort-enums + +# C++ flags common to all targets +CXXFLAGS += $(OPT) + +# Assembler flags common to all targets +ASMFLAGS += -g3 +ASMFLAGS += -mcpu=cortex-m4 +ASMFLAGS += -mthumb -mabi=aapcs +ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +ASMFLAGS += -DBOARD_PCA10056 +ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET +ASMFLAGS += -DFLOAT_ABI_HARD +ASMFLAGS += -DNRF52840_XXAA +ASMFLAGS += -DRETARGET_ENABLED=1 + +# Linker flags +LDFLAGS += $(OPT) +LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) +LDFLAGS += -mcpu=cortex-m4 +LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# let linker dump unused sections +LDFLAGS += -Wl,--gc-sections +# use newlib in nano version +LDFLAGS += --specs=nano.specs + +nrf52840_xxaa: CFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: CFLAGS += -D__STACK_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__STACK_SIZE=8192 + +# Add standard libraries at the very end of the linker input, after all objects +# that may need symbols provided by these libraries. +LIB_FILES += -lc -lnosys -lm + + +.PHONY: default help + +# Default target - first one defined +default: nrf52840_xxaa + +# Print all targets that can be built +help: + @echo following targets are available: + @echo nrf52840_xxaa + @echo sdk_config - starting external tool for editing sdk_config.h + @echo flash - flashing binary + +TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc + + +include $(TEMPLATE_PATH)/Makefile.common + +$(foreach target, $(TARGETS), $(call define_target, $(target))) + +.PHONY: flash erase + +# Flash the program +flash: $(OUTPUT_DIRECTORY)/nrf52840_xxaa.hex + @echo Flashing: $< + nrfjprog -f nrf52 --program $< --sectorerase + nrfjprog -f nrf52 --reset + +erase: + nrfjprog -f nrf52 --eraseall + +SDK_CONFIG_FILE := ../config/sdk_config.h +CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar +sdk_config: + java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/armgcc/wireless_uart_raw_second_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/armgcc/wireless_uart_raw_second_gcc_nrf52.ld new file mode 100644 index 0000000..8eec923 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/armgcc/wireless_uart_raw_second_gcc_nrf52.ld @@ -0,0 +1,51 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x100000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 +} + +SECTIONS +{ +} + +SECTIONS +{ + . = ALIGN(4); + .mem_section_dummy_ram : + { + } + .log_dynamic_data : + { + PROVIDE(__start_log_dynamic_data = .); + KEEP(*(SORT(.log_dynamic_data*))) + PROVIDE(__stop_log_dynamic_data = .); + } > RAM + +} INSERT AFTER .data; + +SECTIONS +{ + .mem_section_dummy_rom : + { + } + .log_const_data : + { + PROVIDE(__start_log_const_data = .); + KEEP(*(SORT(.log_const_data*))) + PROVIDE(__stop_log_const_data = .); + } > FLASH + .nrf_balloc : + { + PROVIDE(__start_nrf_balloc = .); + KEEP(*(.nrf_balloc)) + PROVIDE(__stop_nrf_balloc = .); + } > FLASH + +} INSERT AFTER .text + +INCLUDE "nrf_common.ld" diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/config/sdk_config.h new file mode 100644 index 0000000..7492382 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/config/sdk_config.h @@ -0,0 +1,2826 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> Application + +//========================================================== +// <o> CONFIG_DEVICE_SHORT_ADDRESS - Device short address +#ifndef CONFIG_DEVICE_SHORT_ADDRESS +#define CONFIG_DEVICE_SHORT_ADDRESS 11 +#endif + +// <o> CONFIG_OTHER_ADDRESS - Peer device short address +#ifndef CONFIG_OTHER_ADDRESS +#define CONFIG_OTHER_ADDRESS 10 +#endif + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// </e> + +// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend +//========================================================== +#ifndef NRF_LOG_BACKEND_RTT_ENABLED +#define NRF_LOG_BACKEND_RTT_ENABLED 1 +#endif +// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// <i> Size of the buffer is a trade-off between RAM usage and processing. +// <i> if buffer is smaller then strings will often be fragmented. +// <i> It is recommended to use size which will fit typical log and only the +// <i> longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS +#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. +// <i> If RTT fails to accept any new data after retries +// <i> module assumes that host is not active and on next +// <i> request it will perform only one write attempt. +// <i> On successful writing, module assumes that host is active +// <i> and scheme with retry is applied again. + +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT +#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 +#endif + +// </e> + +// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 1 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 0 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Segger_RTT + +//========================================================== +// <h> segger_rtt - SEGGER RTT + +//========================================================== +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// <i> or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// <i> The following modes are supported: +// <i> - SKIP - Do not block, output nothing. +// <i> - TRIM - Do not block, output as much as fits. +// <i> - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_iar_nRF5x.icf new file mode 100644 index 0000000..8e25f22 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_iar_nRF5x.icf @@ -0,0 +1,36 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x0; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x0; +define symbol __ICFEDIT_region_ROM_end__ = 0xfffff; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003ffff; +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 8192; +define symbol __ICFEDIT_size_heap__ = 8192; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; +define block RO_END with alignment = 8, size = 0 { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly, + block RO_END }; +place in RAM_region { readwrite, + block CSTACK, + block HEAP }; + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_pca10056.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_pca10056.ewd new file mode 100644 index 0000000..a846fea --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_pca10056.ewd @@ -0,0 +1,1350 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>26</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52840_xxaa.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>1</state> + </option> + <option> + <name>CExtraOptions</name> + <state>--drv_vector_table_base=0x0</state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>JLINK_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>0</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52840_xxaa.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>IjetAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>15</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCXDS100AttachSlave</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>CCXds100InterfaceList</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_pca10056.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_pca10056.ewp new file mode 100644 index 0000000..1d40a56 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/iar/wireless_uart_raw_second_pca10056.ewp @@ -0,0 +1,1062 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>22</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>ExePath</name> + <state>_build</state> + </option> + <option> + <name>ObjPath</name> + <state>_build</state> + </option> + <option> + <name>ListPath</name> + <state>_build</state> + </option> + <option> + <name>Variant</name> + <version>20</version> + <state>34</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>1</state> + </option> + <option> + <name>Input description</name> + <state>Full formatting.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>Output description</name> + <state>Full formatting.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>5</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>6.10.3.52260</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>nrf52840_xxaa nRF52840_xxAA</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>0</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>0</state> + </option> + <option> + <name>GRuntimeLibThreads</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>31</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCGuardCalls</name> + <state>1</state> + </option> + <option> + <name>CCOptimizationNoSizeConstraints</name> + <state>0</state> + </option> + <option> + <name>CCDefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>1</version> + <state>11111110</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>0</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>1</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\raw</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + <option> + <name>IccFloatSemantics</name> + <state>0</state> + </option> + <option> + <name>CCNoLiteralPool</name> + <state>0</state> + </option> + <option> + <name>CCOptStrategySlave</name> + <version>0</version> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>9</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state></state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\raw</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + <option> + <name>AsmNoLiteralPool</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>1</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>wireless_uart_raw_second_pca10056.hex</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkOutputFile</name> + <state>wireless_uart_raw_second_pca10056.out</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>1</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$\wireless_uart_raw_second_iar_nRF5x.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>1</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>0</state> + </option> + <option> + <name>IlinkExtraOptions</name> + <state></state> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + <option> + <name>IlinkOptMergeDuplSections</name> + <state>0</state> + </option> + <option> + <name>IlinkOptUseVfe</name> + <state>1</state> + </option> + <option> + <name>IlinkOptForceVfe</name> + <state>0</state> + </option> + <option> + <name>IlinkStackAnalysisEnable</name> + <state>0</state> + </option> + <option> + <name>IlinkStackControlFile</name> + <state></state> + </option> + <option> + <name>IlinkStackCallGraphFile</name> + <state></state> + </option> + <option> + <name>CrcAlgorithm</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcUnitSize</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IlinkThreadsSlave</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + </configuration> <group> + <name>nRF_Log</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name> </file> </group> <group> + <name>nRF_Libraries</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name> </file> </group> <group> + <name>nRF_802_15_4</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\raw\802_15_4_lib_iar.a</name> </file> </group> <group> + <name>Board Definition</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name> </file> </group> <group> + <name>nRF_Drivers</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name> </file> </group> <group> + <name>Application</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\fsm.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\main.c</name> </file> <file> + <name>$PROJ_DIR$\..\config\sdk_config.h</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\security.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\uart.c</name> </file> </group> <group> + <name>nRF_Segger_RTT</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name> </file> </group> <group> + <name>None</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52840.s</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</name> </file> </group></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/flash_placement.xml new file mode 100644 index 0000000..42d7b71 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/flash_placement.xml @@ -0,0 +1,35 @@ +<!DOCTYPE Linker_Placement_File> +<Root name="Flash Section Placement"> + <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)"> + <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" /> + <ProgramSection alignment="4" load="Yes" name=".init" /> + <ProgramSection alignment="4" load="Yes" name=".init_rodata" /> + <ProgramSection alignment="4" load="Yes" name=".text" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data" inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/> + <ProgramSection alignment="4" load="Yes" name=".dtors" /> + <ProgramSection alignment="4" load="Yes" name=".ctors" /> + <ProgramSection alignment="4" load="Yes" name=".rodata" /> + <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" /> + <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" /> + <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" /> + <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" /> + </MemorySegment> + <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)"> + <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" /> + <ProgramSection alignment="4" load="No" name=".fast_run" /> + <ProgramSection alignment="4" load="No" name=".data_run" /> + <ProgramSection alignment="4" load="No" name=".tdata_run" /> + <ProgramSection alignment="4" load="No" name=".bss" /> + <ProgramSection alignment="4" load="No" name=".tbss" /> + <ProgramSection alignment="4" load="No" name=".non_init" /> + <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" /> + <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" address_symbol="__StackLimit" end_symbol="__StackTop"/> + <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" /> + </MemorySegment> +</Root> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/wireless_uart_raw_second_pca10056.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/wireless_uart_raw_second_pca10056.emProject new file mode 100644 index 0000000..e274288 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/wireless_uart_raw_second_pca10056.emProject @@ -0,0 +1,95 @@ +<!DOCTYPE CrossStudio_Project_File> +<solution Name="wireless_uart_raw_second_pca10056" target="8" version="2"> + <project Name="wireless_uart_raw_second_pca10056"> + <configuration + Name="Common" + arm_architecture="v7EM" + arm_core_type="Cortex-M4" + arm_endian="Little" + arm_fp_abi="Hard" + arm_fpu_type="FPv4-SP-D16" + arm_linker_heap_size="8192" + arm_linker_process_stack_size="0" + arm_linker_stack_size="8192" + arm_linker_treat_warnings_as_errors="No" + arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD" + arm_target_device_name="nRF52840_xxAA" + arm_target_interface_type="SWD" + c_user_include_directories="../../../config;../../../../../../../../components/802_15_4;../../../../../../../../components/802_15_4/api/HAL;../../../../../../../../components/802_15_4/api/HAL/nrf52_soc;../../../../../../../../components/802_15_4/api/MAC;../../../../../../../../components/802_15_4/api/PHY;../../../../../../../../components/802_15_4/api/RAL;../../../../../../../../components/802_15_4/api/RAL/nrf52_soc;../../../../../../../../components/802_15_4/api/SecAL;../../../../../../../../components/802_15_4/api/SysAL;../../../../../../../../components/802_15_4/raw;../../../../../../../../components/boards;../../../../../../../../components/drivers_nrf/nrf_soc_nosd;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/util;../../../../../../../../components/toolchain/cmsis/include;../../../../..;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;" + c_preprocessor_definitions="BOARD_PCA10056;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52840_XXAA;RETARGET_ENABLED=1;" + debug_target_connection="J-Link" + gcc_entry_point="Reset_Handler" + macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar" + debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52840.svd" + debug_start_from_entry_point_symbol="No" + gcc_debugging_level="Level 3" linker_output_format="hex" + linker_printf_width_precision_supported="Yes" + linker_printf_fmt_level="long" + linker_section_placement_file="flash_placement.xml" + linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x100000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x40000;FLASH_START=0x0;FLASH_SIZE=0x100000;RAM_START=0x20000000;RAM_SIZE=0x40000" + linker_section_placements_segments="FLASH RX 0x0 0x100000;RAM RWX 0x20000000 0x40000" + project_directory="" + project_type="Executable" /> + <folder Name="Segger Startup Files"> + <file file_name="$(StudioDir)/source/thumb_crt0.s" /> + </folder> + <folder Name="nRF_Log"> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" /> + </folder> + <folder Name="nRF_Libraries"> + <file file_name="../../../../../../../../components/libraries/util/app_error.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" /> + <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" /> + <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" /> + <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" /> + <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" /> + </folder> + <folder Name="nRF_802_15_4"> + <file file_name="../../../../../../../../components/802_15_4/raw/802_15_4_lib_gcc.a" /> + </folder> + <folder Name="Board Definition"> + <file file_name="../../../../../../../../components/boards/boards.c" /> + </folder> + <folder Name="nRF_Drivers"> + <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/hal/nrf_ecb.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" /> + </folder> + <folder Name="Application"> + <file file_name="../../../../../assert.c" /> + <file file_name="../../../../../fsm.c" /> + <file file_name="../../../../../main.c" /> + <file file_name="../config/sdk_config.h" /> + <file file_name="../../../../../security.c" /> + <file file_name="../../../../../uart.c" /> + </folder> + <folder Name="nRF_Segger_RTT"> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" /> + </folder> + <folder Name="None"> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52840_Vectors.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52840.c" /> + </folder> + </project> + <configuration Name="Release" + c_preprocessor_definitions="NDEBUG" + gcc_optimization_level="Optimize For Size" /> + <configuration Name="Debug" + c_preprocessor_definitions="DEBUG; DEBUG_NRF" + gcc_optimization_level="None"/> +</solution> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/wireless_uart_raw_second_pca10056.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/wireless_uart_raw_second_pca10056.emSession new file mode 100644 index 0000000..61b6e6b --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/pca10056/blank/ses/wireless_uart_raw_second_pca10056.emSession @@ -0,0 +1,7 @@ +<!DOCTYPE CrossStudio_Session_File> +<session> + <ARMCrossStudioWindow activeProject="wireless_uart_raw_second_pca10056" buildConfiguration="Release"/> + <Files> + <SessionOpenFile codecName="Default" debugPath="../../../../../main.c" left="0" name="unnamed" path="../../../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/> + </Files> +</session>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/wireless_uart_raw_second.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/wireless_uart_raw_second.eww new file mode 100644 index 0000000..82f391a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/raw/second/wireless_uart_raw_second.eww @@ -0,0 +1,6 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<workspace> <project> + <path>$WS_DIR$\pca10056\blank\iar\wireless_uart_raw_second_pca10056.ewp</path> + </project> <batchBuild/> +</workspace>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/retarget.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/retarget.c new file mode 100644 index 0000000..83394f3 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/retarget.c @@ -0,0 +1,87 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <stdio.h> +#include <rt_misc.h> + +#pragma import(__use_no_heap) +#pragma import(__use_no_semihosting_swi) + + +struct __FILE +{ + int handle; +}; + +FILE __stdout; +FILE __stdin; + +int fputc(int c, FILE *f) +{ + return 0; +} + + +int fgetc(FILE *f) +{ + return EOF; +} + + +int ferror(FILE *f) +{ + return EOF; +} + + +void _ttywrch(int c) +{ + +} + + +void _sys_exit(int return_code) +{ + while (1) + { + // intentionally left blank + } +} diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm4/wireless_uart_secure_first_pca10056.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm4/wireless_uart_secure_first_pca10056.uvopt new file mode 100644 index 0000000..6790765 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm4/wireless_uart_secure_first_pca10056.uvopt @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> <OPTFL> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> <DebugOpt> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm4/wireless_uart_secure_first_pca10056.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm4/wireless_uart_secure_first_pca10056.uvproj new file mode 100644 index 0000000..0c332cf --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm4/wireless_uart_secure_first_pca10056.uvproj @@ -0,0 +1,533 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd"> + + <SchemaVersion>1.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> + <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>core.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>0</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <RoSelD>3</RoSelD> + <RwSelD>5</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls>--c99 --reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x00000000</DataAddressRange> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>None</GroupName> + <Files> <File> + <FileName>arm_startup_nrf52840.s</FileName> + <FileType>2</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52840.s</FilePath> </File> <File> + <FileName>system_nrf52840.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\secure\802_15_4_lib_keil.lib</FilePath> </File> <File> + <FileName>rng_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\rng_entity.c</FilePath> </File> <File> + <FileName>sec_aes_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\sec_aes_entity.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets> + +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm5_no_packs/wireless_uart_secure_first_pca10056.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm5_no_packs/wireless_uart_secure_first_pca10056.uvoptx new file mode 100644 index 0000000..6a025f0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm5_no_packs/wireless_uart_secure_first_pca10056.uvoptx @@ -0,0 +1,115 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>65535</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\_build\</ListingPath> + </OPTLEX> + <CpuCode>0</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>0</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <tPdscDbg>1</tPdscDbg> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <nTsel>7</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52840_xxAA$Flash\nrf52xxx_uicr.flm)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx))</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm5_no_packs/wireless_uart_secure_first_pca10056.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm5_no_packs/wireless_uart_secure_first_pca10056.uvprojx new file mode 100644 index 0000000..171ffd0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/arm5_no_packs/wireless_uart_secure_first_pca10056.uvprojx @@ -0,0 +1,557 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + + <SchemaVersion>2.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID> + <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL> <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll></FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + <RestoreSysVw>1</RestoreSysVw> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + <RestoreSysVw>1</RestoreSysVw> <UsePdscDebugDescription>1</UsePdscDebugDescription> </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <useXO>0</useXO> + <v6Lang>0</v6Lang> + <v6LangP>0</v6LangP> + <vShortEn>0</vShortEn> + <vShortWch>0</vShortWch> + <VariousControls> + <MiscControls>--reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase></pXoBase> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\secure\802_15_4_lib_keil.lib</FilePath> </File> <File> + <FileName>rng_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\rng_entity.c</FilePath> </File> <File> + <FileName>sec_aes_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\sec_aes_entity.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets><RTE> + <packages> + <filter> + <targetInfos/> + </filter> <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> </packages> + <apis/> + <components> <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core"> + <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> + <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device"> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> </components> + <files> </files> +</RTE> +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/armgcc/Makefile new file mode 100644 index 0000000..4025e38 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/armgcc/Makefile @@ -0,0 +1,175 @@ +PROJECT_NAME := wireless_uart_secure_first_pca10056 +TARGETS := nrf52840_xxaa +OUTPUT_DIRECTORY := _build + +SDK_ROOT := ../../../../../../../.. +PROJ_DIR := ../../.. + +$(OUTPUT_DIRECTORY)/nrf52840_xxaa.out: \ + LINKER_SCRIPT := wireless_uart_secure_first_gcc_nrf52.ld + +# Source files common to all targets +SRC_FILES += \ + $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52840.S \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \ + $(SDK_ROOT)/components/libraries/util/app_error.c \ + $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ + $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ + $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ + $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ + $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \ + $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \ + $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \ + $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ + $(SDK_ROOT)/components/802_15_4/src/rng_entity.c \ + $(SDK_ROOT)/components/802_15_4/src/sec_aes_entity.c \ + $(SDK_ROOT)/components/boards/boards.c \ + $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ + $(SDK_ROOT)/modules/nrfx/hal/nrf_ecb.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ + $(PROJ_DIR)/../../assert.c \ + $(PROJ_DIR)/../../fsm.c \ + $(PROJ_DIR)/../../main.c \ + $(PROJ_DIR)/../../security.c \ + $(PROJ_DIR)/../../uart.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \ + $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52840.c \ + +# Include folders common to all targets +INC_FOLDERS += \ + $(SDK_ROOT)/integration/nrfx \ + $(SDK_ROOT)/components/802_15_4/api/RAL \ + $(SDK_ROOT)/components/libraries/experimental_log/src \ + $(SDK_ROOT)/components/802_15_4/api/SysAL \ + ../config \ + $(SDK_ROOT)/components/libraries/experimental_section_vars \ + $(SDK_ROOT)/components/802_15_4/api/HAL/nrf52_soc \ + $(SDK_ROOT)/modules/nrfx/mdk \ + $(SDK_ROOT)/components/libraries/strerror \ + $(SDK_ROOT)/components/boards \ + $(SDK_ROOT)/components/802_15_4/api/HAL \ + $(SDK_ROOT)/components/libraries/experimental_memobj \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ + $(SDK_ROOT)/modules/nrfx/hal \ + $(SDK_ROOT)/components/802_15_4/api/PHY \ + $(SDK_ROOT)/modules/nrfx/drivers/include \ + $(SDK_ROOT)/components/802_15_4 \ + $(SDK_ROOT)/external/fprintf \ + $(SDK_ROOT)/components/802_15_4/api/MAC \ + $(SDK_ROOT)/components/libraries/balloc \ + $(SDK_ROOT)/components/libraries/util \ + $(SDK_ROOT)/modules/nrfx \ + $(SDK_ROOT)/external/segger_rtt \ + $(SDK_ROOT)/integration/nrfx/legacy \ + $(SDK_ROOT)/components/libraries/experimental_log \ + $(PROJ_DIR)/../.. \ + $(SDK_ROOT)/components/libraries/atomic \ + $(SDK_ROOT)/components/libraries/delay \ + $(SDK_ROOT)/components/802_15_4/api/SecAL \ + $(SDK_ROOT)/components/toolchain/cmsis/include \ + $(SDK_ROOT)/components/802_15_4/secure \ + $(SDK_ROOT)/components/802_15_4/api/RAL/nrf52_soc \ + +# Libraries common to all targets +LIB_FILES += \ + $(SDK_ROOT)/components/802_15_4/secure/802_15_4_lib_gcc.a \ + +# Optimization flags +OPT = -O3 -g3 +# Uncomment the line below to enable link time optimization +#OPT += -flto + +# C flags common to all targets +CFLAGS += $(OPT) +CFLAGS += -DBOARD_PCA10056 +CFLAGS += -DCONFIG_GPIO_AS_PINRESET +CFLAGS += -DFLOAT_ABI_HARD +CFLAGS += -DNRF52840_XXAA +CFLAGS += -DRETARGET_ENABLED=1 +CFLAGS += -mcpu=cortex-m4 +CFLAGS += -mthumb -mabi=aapcs +CFLAGS += -Wall -Werror +CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# keep every function in a separate section, this allows linker to discard unused ones +CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing +CFLAGS += -fno-builtin -fshort-enums + +# C++ flags common to all targets +CXXFLAGS += $(OPT) + +# Assembler flags common to all targets +ASMFLAGS += -g3 +ASMFLAGS += -mcpu=cortex-m4 +ASMFLAGS += -mthumb -mabi=aapcs +ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +ASMFLAGS += -DBOARD_PCA10056 +ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET +ASMFLAGS += -DFLOAT_ABI_HARD +ASMFLAGS += -DNRF52840_XXAA +ASMFLAGS += -DRETARGET_ENABLED=1 + +# Linker flags +LDFLAGS += $(OPT) +LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) +LDFLAGS += -mcpu=cortex-m4 +LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# let linker dump unused sections +LDFLAGS += -Wl,--gc-sections +# use newlib in nano version +LDFLAGS += --specs=nano.specs + +nrf52840_xxaa: CFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: CFLAGS += -D__STACK_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__STACK_SIZE=8192 + +# Add standard libraries at the very end of the linker input, after all objects +# that may need symbols provided by these libraries. +LIB_FILES += -lc -lnosys -lm + + +.PHONY: default help + +# Default target - first one defined +default: nrf52840_xxaa + +# Print all targets that can be built +help: + @echo following targets are available: + @echo nrf52840_xxaa + @echo sdk_config - starting external tool for editing sdk_config.h + @echo flash - flashing binary + +TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc + + +include $(TEMPLATE_PATH)/Makefile.common + +$(foreach target, $(TARGETS), $(call define_target, $(target))) + +.PHONY: flash erase + +# Flash the program +flash: $(OUTPUT_DIRECTORY)/nrf52840_xxaa.hex + @echo Flashing: $< + nrfjprog -f nrf52 --program $< --sectorerase + nrfjprog -f nrf52 --reset + +erase: + nrfjprog -f nrf52 --eraseall + +SDK_CONFIG_FILE := ../config/sdk_config.h +CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar +sdk_config: + java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/armgcc/wireless_uart_secure_first_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/armgcc/wireless_uart_secure_first_gcc_nrf52.ld new file mode 100644 index 0000000..8eec923 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/armgcc/wireless_uart_secure_first_gcc_nrf52.ld @@ -0,0 +1,51 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x100000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 +} + +SECTIONS +{ +} + +SECTIONS +{ + . = ALIGN(4); + .mem_section_dummy_ram : + { + } + .log_dynamic_data : + { + PROVIDE(__start_log_dynamic_data = .); + KEEP(*(SORT(.log_dynamic_data*))) + PROVIDE(__stop_log_dynamic_data = .); + } > RAM + +} INSERT AFTER .data; + +SECTIONS +{ + .mem_section_dummy_rom : + { + } + .log_const_data : + { + PROVIDE(__start_log_const_data = .); + KEEP(*(SORT(.log_const_data*))) + PROVIDE(__stop_log_const_data = .); + } > FLASH + .nrf_balloc : + { + PROVIDE(__start_nrf_balloc = .); + KEEP(*(.nrf_balloc)) + PROVIDE(__stop_nrf_balloc = .); + } > FLASH + +} INSERT AFTER .text + +INCLUDE "nrf_common.ld" diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/config/sdk_config.h new file mode 100644 index 0000000..657d479 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/config/sdk_config.h @@ -0,0 +1,2826 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> Application + +//========================================================== +// <o> CONFIG_DEVICE_SHORT_ADDRESS - Device short address +#ifndef CONFIG_DEVICE_SHORT_ADDRESS +#define CONFIG_DEVICE_SHORT_ADDRESS 10 +#endif + +// <o> CONFIG_OTHER_ADDRESS - Peer device short address +#ifndef CONFIG_OTHER_ADDRESS +#define CONFIG_OTHER_ADDRESS 11 +#endif + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// </e> + +// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend +//========================================================== +#ifndef NRF_LOG_BACKEND_RTT_ENABLED +#define NRF_LOG_BACKEND_RTT_ENABLED 1 +#endif +// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// <i> Size of the buffer is a trade-off between RAM usage and processing. +// <i> if buffer is smaller then strings will often be fragmented. +// <i> It is recommended to use size which will fit typical log and only the +// <i> longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS +#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. +// <i> If RTT fails to accept any new data after retries +// <i> module assumes that host is not active and on next +// <i> request it will perform only one write attempt. +// <i> On successful writing, module assumes that host is active +// <i> and scheme with retry is applied again. + +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT +#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 +#endif + +// </e> + +// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 1 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 0 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Segger_RTT + +//========================================================== +// <h> segger_rtt - SEGGER RTT + +//========================================================== +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// <i> or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// <i> The following modes are supported: +// <i> - SKIP - Do not block, output nothing. +// <i> - TRIM - Do not block, output as much as fits. +// <i> - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_iar_nRF5x.icf new file mode 100644 index 0000000..8e25f22 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_iar_nRF5x.icf @@ -0,0 +1,36 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x0; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x0; +define symbol __ICFEDIT_region_ROM_end__ = 0xfffff; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003ffff; +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 8192; +define symbol __ICFEDIT_size_heap__ = 8192; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; +define block RO_END with alignment = 8, size = 0 { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly, + block RO_END }; +place in RAM_region { readwrite, + block CSTACK, + block HEAP }; + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_pca10056.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_pca10056.ewd new file mode 100644 index 0000000..a846fea --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_pca10056.ewd @@ -0,0 +1,1350 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>26</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52840_xxaa.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>1</state> + </option> + <option> + <name>CExtraOptions</name> + <state>--drv_vector_table_base=0x0</state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>JLINK_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>0</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52840_xxaa.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>IjetAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>15</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCXDS100AttachSlave</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>CCXds100InterfaceList</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_pca10056.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_pca10056.ewp new file mode 100644 index 0000000..9a5e545 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/iar/wireless_uart_secure_first_pca10056.ewp @@ -0,0 +1,1064 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>22</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>ExePath</name> + <state>_build</state> + </option> + <option> + <name>ObjPath</name> + <state>_build</state> + </option> + <option> + <name>ListPath</name> + <state>_build</state> + </option> + <option> + <name>Variant</name> + <version>20</version> + <state>34</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>1</state> + </option> + <option> + <name>Input description</name> + <state>Full formatting.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>Output description</name> + <state>Full formatting.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>5</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>6.10.3.52260</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>nrf52840_xxaa nRF52840_xxAA</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>0</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>0</state> + </option> + <option> + <name>GRuntimeLibThreads</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>31</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCGuardCalls</name> + <state>1</state> + </option> + <option> + <name>CCOptimizationNoSizeConstraints</name> + <state>0</state> + </option> + <option> + <name>CCDefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>1</version> + <state>11111110</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>0</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>1</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\secure</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + <option> + <name>IccFloatSemantics</name> + <state>0</state> + </option> + <option> + <name>CCNoLiteralPool</name> + <state>0</state> + </option> + <option> + <name>CCOptStrategySlave</name> + <version>0</version> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>9</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state></state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\secure</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + <option> + <name>AsmNoLiteralPool</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>1</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>wireless_uart_secure_first_pca10056.hex</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkOutputFile</name> + <state>wireless_uart_secure_first_pca10056.out</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>1</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$\wireless_uart_secure_first_iar_nRF5x.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>1</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>0</state> + </option> + <option> + <name>IlinkExtraOptions</name> + <state></state> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + <option> + <name>IlinkOptMergeDuplSections</name> + <state>0</state> + </option> + <option> + <name>IlinkOptUseVfe</name> + <state>1</state> + </option> + <option> + <name>IlinkOptForceVfe</name> + <state>0</state> + </option> + <option> + <name>IlinkStackAnalysisEnable</name> + <state>0</state> + </option> + <option> + <name>IlinkStackControlFile</name> + <state></state> + </option> + <option> + <name>IlinkStackCallGraphFile</name> + <state></state> + </option> + <option> + <name>CrcAlgorithm</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcUnitSize</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IlinkThreadsSlave</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + </configuration> <group> + <name>nRF_Log</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name> </file> </group> <group> + <name>nRF_Libraries</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name> </file> </group> <group> + <name>nRF_802_15_4</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\secure\802_15_4_lib_iar.a</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\src\rng_entity.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\src\sec_aes_entity.c</name> </file> </group> <group> + <name>Board Definition</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name> </file> </group> <group> + <name>nRF_Drivers</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name> </file> </group> <group> + <name>Application</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\fsm.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\main.c</name> </file> <file> + <name>$PROJ_DIR$\..\config\sdk_config.h</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\security.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\uart.c</name> </file> </group> <group> + <name>nRF_Segger_RTT</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name> </file> </group> <group> + <name>None</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52840.s</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</name> </file> </group></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/flash_placement.xml new file mode 100644 index 0000000..42d7b71 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/flash_placement.xml @@ -0,0 +1,35 @@ +<!DOCTYPE Linker_Placement_File> +<Root name="Flash Section Placement"> + <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)"> + <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" /> + <ProgramSection alignment="4" load="Yes" name=".init" /> + <ProgramSection alignment="4" load="Yes" name=".init_rodata" /> + <ProgramSection alignment="4" load="Yes" name=".text" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data" inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/> + <ProgramSection alignment="4" load="Yes" name=".dtors" /> + <ProgramSection alignment="4" load="Yes" name=".ctors" /> + <ProgramSection alignment="4" load="Yes" name=".rodata" /> + <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" /> + <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" /> + <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" /> + <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" /> + </MemorySegment> + <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)"> + <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" /> + <ProgramSection alignment="4" load="No" name=".fast_run" /> + <ProgramSection alignment="4" load="No" name=".data_run" /> + <ProgramSection alignment="4" load="No" name=".tdata_run" /> + <ProgramSection alignment="4" load="No" name=".bss" /> + <ProgramSection alignment="4" load="No" name=".tbss" /> + <ProgramSection alignment="4" load="No" name=".non_init" /> + <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" /> + <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" address_symbol="__StackLimit" end_symbol="__StackTop"/> + <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" /> + </MemorySegment> +</Root> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/wireless_uart_secure_first_pca10056.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/wireless_uart_secure_first_pca10056.emProject new file mode 100644 index 0000000..f19386a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/wireless_uart_secure_first_pca10056.emProject @@ -0,0 +1,97 @@ +<!DOCTYPE CrossStudio_Project_File> +<solution Name="wireless_uart_secure_first_pca10056" target="8" version="2"> + <project Name="wireless_uart_secure_first_pca10056"> + <configuration + Name="Common" + arm_architecture="v7EM" + arm_core_type="Cortex-M4" + arm_endian="Little" + arm_fp_abi="Hard" + arm_fpu_type="FPv4-SP-D16" + arm_linker_heap_size="8192" + arm_linker_process_stack_size="0" + arm_linker_stack_size="8192" + arm_linker_treat_warnings_as_errors="No" + arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD" + arm_target_device_name="nRF52840_xxAA" + arm_target_interface_type="SWD" + c_user_include_directories="../../../config;../../../../../../../../components/802_15_4;../../../../../../../../components/802_15_4/api/HAL;../../../../../../../../components/802_15_4/api/HAL/nrf52_soc;../../../../../../../../components/802_15_4/api/MAC;../../../../../../../../components/802_15_4/api/PHY;../../../../../../../../components/802_15_4/api/RAL;../../../../../../../../components/802_15_4/api/RAL/nrf52_soc;../../../../../../../../components/802_15_4/api/SecAL;../../../../../../../../components/802_15_4/api/SysAL;../../../../../../../../components/802_15_4/secure;../../../../../../../../components/boards;../../../../../../../../components/drivers_nrf/nrf_soc_nosd;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/util;../../../../../../../../components/toolchain/cmsis/include;../../../../..;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;" + c_preprocessor_definitions="BOARD_PCA10056;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52840_XXAA;RETARGET_ENABLED=1;" + debug_target_connection="J-Link" + gcc_entry_point="Reset_Handler" + macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar" + debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52840.svd" + debug_start_from_entry_point_symbol="No" + gcc_debugging_level="Level 3" linker_output_format="hex" + linker_printf_width_precision_supported="Yes" + linker_printf_fmt_level="long" + linker_section_placement_file="flash_placement.xml" + linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x100000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x40000;FLASH_START=0x0;FLASH_SIZE=0x100000;RAM_START=0x20000000;RAM_SIZE=0x40000" + linker_section_placements_segments="FLASH RX 0x0 0x100000;RAM RWX 0x20000000 0x40000" + project_directory="" + project_type="Executable" /> + <folder Name="Segger Startup Files"> + <file file_name="$(StudioDir)/source/thumb_crt0.s" /> + </folder> + <folder Name="nRF_Log"> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" /> + </folder> + <folder Name="nRF_Libraries"> + <file file_name="../../../../../../../../components/libraries/util/app_error.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" /> + <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" /> + <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" /> + <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" /> + <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" /> + </folder> + <folder Name="nRF_802_15_4"> + <file file_name="../../../../../../../../components/802_15_4/secure/802_15_4_lib_gcc.a" /> + <file file_name="../../../../../../../../components/802_15_4/src/rng_entity.c" /> + <file file_name="../../../../../../../../components/802_15_4/src/sec_aes_entity.c" /> + </folder> + <folder Name="Board Definition"> + <file file_name="../../../../../../../../components/boards/boards.c" /> + </folder> + <folder Name="nRF_Drivers"> + <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/hal/nrf_ecb.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" /> + </folder> + <folder Name="Application"> + <file file_name="../../../../../assert.c" /> + <file file_name="../../../../../fsm.c" /> + <file file_name="../../../../../main.c" /> + <file file_name="../config/sdk_config.h" /> + <file file_name="../../../../../security.c" /> + <file file_name="../../../../../uart.c" /> + </folder> + <folder Name="nRF_Segger_RTT"> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" /> + </folder> + <folder Name="None"> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52840_Vectors.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52840.c" /> + </folder> + </project> + <configuration Name="Release" + c_preprocessor_definitions="NDEBUG" + gcc_optimization_level="Optimize For Size" /> + <configuration Name="Debug" + c_preprocessor_definitions="DEBUG; DEBUG_NRF" + gcc_optimization_level="None"/> +</solution> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/wireless_uart_secure_first_pca10056.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/wireless_uart_secure_first_pca10056.emSession new file mode 100644 index 0000000..d65359d --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/pca10056/blank/ses/wireless_uart_secure_first_pca10056.emSession @@ -0,0 +1,7 @@ +<!DOCTYPE CrossStudio_Session_File> +<session> + <ARMCrossStudioWindow activeProject="wireless_uart_secure_first_pca10056" buildConfiguration="Release"/> + <Files> + <SessionOpenFile codecName="Default" debugPath="../../../../../main.c" left="0" name="unnamed" path="../../../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/> + </Files> +</session>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/wireless_uart_secure_first.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/wireless_uart_secure_first.eww new file mode 100644 index 0000000..1004635 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/first/wireless_uart_secure_first.eww @@ -0,0 +1,6 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<workspace> <project> + <path>$WS_DIR$\pca10056\blank\iar\wireless_uart_secure_first_pca10056.ewp</path> + </project> <batchBuild/> +</workspace>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm4/wireless_uart_secure_second_pca10056.uvopt b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm4/wireless_uart_secure_second_pca10056.uvopt new file mode 100644 index 0000000..6790765 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm4/wireless_uart_secure_second_pca10056.uvopt @@ -0,0 +1,31 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> <OPTFL> + <IsCurrentTarget>1</IsCurrentTarget> + </OPTFL> <DebugOpt> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FF1nrf52xxx_uicr.flm -FS110001000 -FL11000</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000)</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm4/wireless_uart_secure_second_pca10056.uvproj b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm4/wireless_uart_secure_second_pca10056.uvproj new file mode 100644 index 0000000..0c332cf --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm4/wireless_uart_secure_second_pca10056.uvproj @@ -0,0 +1,533 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd"> + + <SchemaVersion>1.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> + <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll>UL2CM3(-UM0364FCE -O78 -S0 -C0 -TO18 -TC16000000 -TP21 -TDS800D -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC2000 -FN1 -FF0nRF52xxx -FS00 -FL0200000)</FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>core.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>0</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <RoSelD>3</RoSelD> + <RwSelD>5</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls>--c99 --reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x00000000</DataAddressRange> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>None</GroupName> + <Files> <File> + <FileName>arm_startup_nrf52840.s</FileName> + <FileType>2</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\arm_startup_nrf52840.s</FilePath> </File> <File> + <FileName>system_nrf52840.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\secure\802_15_4_lib_keil.lib</FilePath> </File> <File> + <FileName>rng_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\rng_entity.c</FilePath> </File> <File> + <FileName>sec_aes_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\sec_aes_entity.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets> + +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm5_no_packs/wireless_uart_secure_second_pca10056.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm5_no_packs/wireless_uart_secure_second_pca10056.uvoptx new file mode 100644 index 0000000..6a025f0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm5_no_packs/wireless_uart_secure_second_pca10056.uvoptx @@ -0,0 +1,115 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd"> + + <SchemaVersion>1.0</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <OPTTT> + <gFlags>1</gFlags> + <BeepAtEnd>1</BeepAtEnd> + <RunSim>0</RunSim> + <RunTarget>1</RunTarget> + </OPTTT> + <OPTHX> + <HexSelection>1</HexSelection> + <FlashByte>65535</FlashByte> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + </OPTHX> + <OPTLEX> + <PageWidth>79</PageWidth> + <PageLength>66</PageLength> + <TabStop>8</TabStop> + <ListingPath>.\_build\</ListingPath> + </OPTLEX> + <CpuCode>0</CpuCode> + <DebugOpt> + <uSim>0</uSim> + <uTrg>1</uTrg> + <sLdApp>1</sLdApp> + <sGomain>1</sGomain> + <sRbreak>1</sRbreak> + <sRwatch>1</sRwatch> + <sRmem>1</sRmem> + <sRfunc>1</sRfunc> + <sRbox>1</sRbox> + <tLdApp>1</tLdApp> + <tGomain>1</tGomain> + <tRbreak>1</tRbreak> + <tRwatch>1</tRwatch> + <tRmem>1</tRmem> + <tRfunc>0</tRfunc> + <tRbox>1</tRbox> + <tRtrace>0</tRtrace> + <sRSysVw>1</sRSysVw> + <tRSysVw>1</tRSysVw> + <tPdscDbg>1</tPdscDbg> + <sRunDeb>0</sRunDeb> + <sLrtime>0</sLrtime> + <nTsel>7</nTsel> + <sDll></sDll> + <sDllPa></sDllPa> + <sDlgDll></sDlgDll> + <sDlgPa></sDlgPa> + <sIfile></sIfile> + <tDll></tDll> + <tDllPa></tDllPa> + <tDlgDll></tDlgDll> + <tDlgPa></tDlgPa> + <tIfile></tIfile> + <pMon>Segger\JL2CM3.dll</pMon> + </DebugOpt> + <TargetDriverDllRegistry> + <SetRegEntry> + <Number>0</Number> + <Key>JL2CM3</Key> + <Name>-U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52840_xxAA$Flash\nrf52xxx_uicr.flm)</Name> + </SetRegEntry> + <SetRegEntry> + <Number>0</Number> + <Key>UL2CM3</Key> + <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx))</Name> + </SetRegEntry> + </TargetDriverDllRegistry> + <Breakpoint/> + <Tracepoint> + <THDelay>0</THDelay> + </Tracepoint> + <DebugFlag> + <trace>0</trace> + <periodic>0</periodic> + <aLwin>0</aLwin> + <aCover>0</aCover> + <aSer1>0</aSer1> + <aSer2>0</aSer2> + <aPa>0</aPa> + <viewmode>0</viewmode> + <vrSel>0</vrSel> + <aSym>0</aSym> + <aTbox>0</aTbox> + <AscS1>0</AscS1> + <AscS2>0</AscS2> + <AscS3>0</AscS3> + <aSer3>0</aSer3> + <eProf>0</eProf> + <aLa>0</aLa> + <aPa1>0</aPa1> + <AscS4>0</AscS4> + <aSer4>0</aSer4> + <StkLoc>0</StkLoc> + <TrcWin>0</TrcWin> + <newCpu>0</newCpu> + <uProt>0</uProt> + </DebugFlag> + <LintExecutable></LintExecutable> + <LintConfigFile></LintConfigFile> + </TargetOption> + </Target></ProjectOpt> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm5_no_packs/wireless_uart_secure_second_pca10056.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm5_no_packs/wireless_uart_secure_second_pca10056.uvprojx new file mode 100644 index 0000000..171ffd0 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/arm5_no_packs/wireless_uart_secure_second_pca10056.uvprojx @@ -0,0 +1,557 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no" ?> +<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd"> + + <SchemaVersion>2.1</SchemaVersion> + + <Header>### uVision Project, (C) Keil Software</Header> + + <Targets> <Target> + <TargetName>nrf52840_xxaa</TargetName> + <ToolsetNumber>0x4</ToolsetNumber> + <ToolsetName>ARM-ADS</ToolsetName> + <TargetOption> + <TargetCommonOption> <Device>nRF52840_xxAA</Device> + <Vendor>Nordic Semiconductor</Vendor> + <PackID>NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0</PackID> + <PackURL>http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/</PackURL> <Cpu>IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE</Cpu> + <FlashUtilSpec></FlashUtilSpec> + <StartupFile></StartupFile> + <FlashDriverDll></FlashDriverDll> + <DeviceId>0</DeviceId> + <RegisterFile>$$Device:nRF52832_xxAA$Device\Include\nrf.h</RegisterFile> + <MemoryEnv></MemoryEnv> + <Cmp></Cmp> + <Asm></Asm> + <Linker></Linker> + <OHString></OHString> + <InfinionOptionDll></InfinionOptionDll> + <SLE66CMisc></SLE66CMisc> + <SLE66AMisc></SLE66AMisc> + <SLE66LinkerMisc></SLE66LinkerMisc> + <SFDFile>..\..\..\..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd</SFDFile> + <bCustSvd>0</bCustSvd> + <UseEnv>0</UseEnv> + <BinPath></BinPath> + <IncludePath></IncludePath> + <LibPath></LibPath> + <RegisterFilePath></RegisterFilePath> + <DBRegisterFilePath></DBRegisterFilePath> + <TargetStatus> + <Error>0</Error> + <ExitCodeStop>0</ExitCodeStop> + <ButtonStop>0</ButtonStop> + <NotGenerated>0</NotGenerated> + <InvalidFlash>1</InvalidFlash> + </TargetStatus> + <OutputDirectory>.\_build\</OutputDirectory> + <OutputName>nrf52840_xxaa</OutputName> + <CreateExecutable>1</CreateExecutable> + <CreateLib>0</CreateLib> + <CreateHexFile>1</CreateHexFile> + <DebugInformation>1</DebugInformation> + <BrowseInformation>1</BrowseInformation> + <ListingPath>.\_build\</ListingPath> + <HexFormatSelection>1</HexFormatSelection> + <Merge32K>0</Merge32K> + <CreateBatchFile>0</CreateBatchFile> + <BeforeCompile> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopU1X>0</nStopU1X> + <nStopU2X>0</nStopU2X> + </BeforeCompile> + <BeforeMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopB1X>0</nStopB1X> + <nStopB2X>0</nStopB2X> + </BeforeMake> + <AfterMake> + <RunUserProg1>0</RunUserProg1> + <RunUserProg2>0</RunUserProg2> + <UserProg1Name></UserProg1Name> + <UserProg2Name></UserProg2Name> + <UserProg1Dos16Mode>0</UserProg1Dos16Mode> + <UserProg2Dos16Mode>0</UserProg2Dos16Mode> + <nStopA1X>0</nStopA1X> + <nStopA2X>0</nStopA2X> + </AfterMake> + <SelectedForBatchBuild>0</SelectedForBatchBuild> + <SVCSIdString></SVCSIdString> + </TargetCommonOption> + <CommonProperty> + <UseCPPCompiler>0</UseCPPCompiler> + <RVCTCodeConst>0</RVCTCodeConst> + <RVCTZI>0</RVCTZI> + <RVCTOtherData>0</RVCTOtherData> + <ModuleSelection>0</ModuleSelection> + <IncludeInBuild>1</IncludeInBuild> + <AlwaysBuild>0</AlwaysBuild> + <GenerateAssemblyFile>0</GenerateAssemblyFile> + <AssembleAssemblyFile>0</AssembleAssemblyFile> + <PublicsOnly>0</PublicsOnly> + <StopOnExitCode>3</StopOnExitCode> + <CustomArgument></CustomArgument> + <IncludeLibraryModules></IncludeLibraryModules> + <ComprImg>1</ComprImg> + </CommonProperty> + <DllOption> + <SimDllName></SimDllName> + <SimDllArguments></SimDllArguments> + <SimDlgDll></SimDlgDll> + <SimDlgDllArguments></SimDlgDllArguments> + <TargetDllName>SARMCM3.DLL</TargetDllName> + <TargetDllArguments>-MPU</TargetDllArguments> + <TargetDlgDll>TCM.DLL</TargetDlgDll> + <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments> + </DllOption> + <DebugOption> + <OPTHX> + <HexSelection>1</HexSelection> + <HexRangeLowAddress>0</HexRangeLowAddress> + <HexRangeHighAddress>0</HexRangeHighAddress> + <HexOffset>0</HexOffset> + <Oh166RecLen>16</Oh166RecLen> + </OPTHX> + <Simulator> + <UseSimulator>0</UseSimulator> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>1</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <LimitSpeedToRealTime>0</LimitSpeedToRealTime> + <RestoreSysVw>1</RestoreSysVw> + </Simulator> + <Target> + <UseTarget>1</UseTarget> + <LoadApplicationAtStartup>1</LoadApplicationAtStartup> + <RunToMain>1</RunToMain> + <RestoreBreakpoints>1</RestoreBreakpoints> + <RestoreWatchpoints>1</RestoreWatchpoints> + <RestoreMemoryDisplay>1</RestoreMemoryDisplay> + <RestoreFunctions>0</RestoreFunctions> + <RestoreToolbox>1</RestoreToolbox> + <RestoreTracepoints>0</RestoreTracepoints> + <RestoreSysVw>1</RestoreSysVw> <UsePdscDebugDescription>1</UsePdscDebugDescription> </Target> + <RunDebugAfterBuild>0</RunDebugAfterBuild> + <TargetSelection>-1</TargetSelection> + <SimDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + </SimDlls> + <TargetDlls> + <CpuDll></CpuDll> + <CpuDllArguments></CpuDllArguments> + <PeripheralDll></PeripheralDll> + <PeripheralDllArguments></PeripheralDllArguments> + <InitializationFile></InitializationFile> + <Driver>Segger\JL2CM3.dll</Driver> + </TargetDlls> + </DebugOption> + <Utilities> + <Flash1> + <UseTargetDll>1</UseTargetDll> + <UseExternalTool>0</UseExternalTool> + <RunIndependent>0</RunIndependent> + <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging> + <Capability>1</Capability> + <DriverSelection>4099</DriverSelection> + </Flash1> + <bUseTDR>1</bUseTDR> + <Flash2>Segger\JL2CM3.dll</Flash2> + <Flash3></Flash3> + <Flash4></Flash4> + </Utilities> + <TargetArmAds> + <ArmAdsMisc> + <GenerateListings>0</GenerateListings> + <asHll>1</asHll> + <asAsm>1</asAsm> + <asMacX>1</asMacX> + <asSyms>1</asSyms> + <asFals>1</asFals> + <asDbgD>1</asDbgD> + <asForm>1</asForm> + <ldLst>0</ldLst> + <ldmm>1</ldmm> + <ldXref>1</ldXref> + <BigEnd>0</BigEnd> + <AdsALst>1</AdsALst> + <AdsACrf>1</AdsACrf> + <AdsANop>0</AdsANop> + <AdsANot>0</AdsANot> + <AdsLLst>1</AdsLLst> + <AdsLmap>1</AdsLmap> + <AdsLcgr>1</AdsLcgr> + <AdsLsym>1</AdsLsym> + <AdsLszi>1</AdsLszi> + <AdsLtoi>1</AdsLtoi> + <AdsLsun>1</AdsLsun> + <AdsLven>1</AdsLven> + <AdsLsxf>1</AdsLsxf> + <RvctClst>0</RvctClst> + <GenPPlst>0</GenPPlst> + <AdsCpuType>"Cortex-M4"</AdsCpuType> + <RvctDeviceName></RvctDeviceName> + <mOS>0</mOS> + <uocRom>0</uocRom> + <uocRam>0</uocRam> + <hadIROM>1</hadIROM> + <hadIRAM>1</hadIRAM> + <hadXRAM>0</hadXRAM> + <uocXRam>0</uocXRam> + <RvdsVP>2</RvdsVP> + <hadIRAM2>0</hadIRAM2> + <hadIROM2>0</hadIROM2> + <StupSel>8</StupSel> + <useUlib>1</useUlib> + <EndSel>0</EndSel> + <uLtcg>0</uLtcg> + <nSecure>0</nSecure> + <RoSelD>3</RoSelD> + <RwSelD>3</RwSelD> + <CodeSel>0</CodeSel> + <OptFeed>0</OptFeed> + <NoZi1>0</NoZi1> + <NoZi2>0</NoZi2> + <NoZi3>0</NoZi3> + <NoZi4>0</NoZi4> + <NoZi5>0</NoZi5> + <Ro1Chk>0</Ro1Chk> + <Ro2Chk>0</Ro2Chk> + <Ro3Chk>0</Ro3Chk> + <Ir1Chk>1</Ir1Chk> + <Ir2Chk>0</Ir2Chk> + <Ra1Chk>0</Ra1Chk> + <Ra2Chk>0</Ra2Chk> + <Ra3Chk>0</Ra3Chk> + <Im1Chk>1</Im1Chk> + <Im2Chk>0</Im2Chk> + <OnChipMemories> + <Ocm1> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm1> + <Ocm2> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm2> + <Ocm3> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm3> + <Ocm4> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm4> + <Ocm5> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm5> + <Ocm6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </Ocm6> + <IRAM> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </IRAM> + <IROM> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </IROM> + <XRAM> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </XRAM> + <OCR_RVCT1> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT1> + <OCR_RVCT2> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT2> + <OCR_RVCT3> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT3> + <OCR_RVCT4> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x100000</Size> + </OCR_RVCT4> + <OCR_RVCT5> + <Type>1</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT5> + <OCR_RVCT6> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT6> + <OCR_RVCT7> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT7> + <OCR_RVCT8> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT8> + <OCR_RVCT9> + <Type>0</Type> + <StartAddress>0x20000000</StartAddress> + <Size>0x40000</Size> + </OCR_RVCT9> + <OCR_RVCT10> + <Type>0</Type> + <StartAddress>0x0</StartAddress> + <Size>0x0</Size> + </OCR_RVCT10> + </OnChipMemories> + <RvctStartVector></RvctStartVector> + </ArmAdsMisc> + <Cads> + <interw>1</interw> + <Optim>4</Optim> + <oTime>0</oTime> + <SplitLS>0</SplitLS> + <OneElfS>1</OneElfS> + <Strict>0</Strict> + <EnumInt>0</EnumInt> + <PlainCh>0</PlainCh> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <wLevel>0</wLevel> + <uThumb>0</uThumb> + <uSurpInc>0</uSurpInc> + <uC99>1</uC99> + <useXO>0</useXO> + <v6Lang>0</v6Lang> + <v6LangP>0</v6LangP> + <vShortEn>0</vShortEn> + <vShortWch>0</vShortWch> + <VariousControls> + <MiscControls>--reduce_paths</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Cads> + <Aads> + <interw>1</interw> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <thumb>0</thumb> + <SplitLS>0</SplitLS> + <SwStkChk>0</SwStkChk> + <NoWarn>0</NoWarn> + <uSurpInc>0</uSurpInc> + <useXO>0</useXO> + <VariousControls> + <MiscControls> --cpreproc_opts=-DBOARD_PCA10056,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DRETARGET_ENABLED=1,-D__HEAP_SIZE=8192,-D__STACK_SIZE=8192</MiscControls> + <Define> BOARD_PCA10056 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA RETARGET_ENABLED=1 __HEAP_SIZE=8192 __STACK_SIZE=8192</Define> + <Undefine></Undefine> + <IncludePath>..\..\..\config;..\..\..\..\..\..\..\..\components\802_15_4;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL;..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\MAC;..\..\..\..\..\..\..\..\components\802_15_4\api\PHY;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL;..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc;..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL;..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL;..\..\..\..\..\..\..\..\components\802_15_4\secure;..\..\..\..\..\..\..\..\components\boards;..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\..\..\..\components\libraries\delay;..\..\..\..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\..\..\..\components\libraries\util;..\..\..\..\..;..\..\..\..\..\..\..\..\external\fprintf;..\..\..\..\..\..\..\..\external\segger_rtt;..\..\..\..\..\..\..\..\integration\nrfx;..\..\..\..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\..\..\..\modules\nrfx;..\..\..\..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\..\..\..\modules\nrfx\mdk;..\config</IncludePath> + </VariousControls> + </Aads> + <LDads> + <umfTarg>1</umfTarg> + <Ropi>0</Ropi> + <Rwpi>0</Rwpi> + <noStLib>0</noStLib> + <RepFail>1</RepFail> + <useFile>0</useFile> + <TextAddressRange>0x00000000</TextAddressRange> + <DataAddressRange>0x20000000</DataAddressRange> + <pXoBase></pXoBase> + <ScatterFile></ScatterFile> + <IncludeLibs></IncludeLibs> + <IncludeLibsPath></IncludeLibsPath> + <Misc>--diag_suppress 6330</Misc> + <LinkerInputFile></LinkerInputFile> + <DisabledWarnings></DisabledWarnings> + </LDads> + </TargetArmAds> + </TargetOption> + <Groups> <Group> + <GroupName>Application</GroupName> + <Files> <File> + <FileName>assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\assert.c</FilePath> </File> <File> + <FileName>fsm.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\fsm.c</FilePath> </File> <File> + <FileName>main.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\main.c</FilePath> </File> <File> + <FileName>retarget.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\retarget.c</FilePath> </File> <File> + <FileName>sdk_config.h</FileName> + <FileType>5</FileType> + <FilePath>..\config\sdk_config.h</FilePath> </File> <File> + <FileName>security.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\security.c</FilePath> </File> <File> + <FileName>uart.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\uart.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>Board Definition</GroupName> + <Files> <File> + <FileName>boards.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\boards\boards.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_802_15_4</GroupName> + <Files> <File> + <FileName>802_15_4_lib_keil.lib</FileName> + <FileType>4</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\secure\802_15_4_lib_keil.lib</FilePath> </File> <File> + <FileName>rng_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\rng_entity.c</FilePath> </File> <File> + <FileName>sec_aes_entity.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\802_15_4\src\sec_aes_entity.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Drivers</GroupName> + <Files> <File> + <FileName>nrf_drv_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</FilePath> </File> <File> + <FileName>nrf_ecb.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</FilePath> </File> <File> + <FileName>nrf_nvic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</FilePath> </File> <File> + <FileName>nrf_soc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</FilePath> </File> <File> + <FileName>nrfx_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</FilePath> </File> <File> + <FileName>nrfx_power_clock.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Libraries</GroupName> + <Files> <File> + <FileName>app_error.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</FilePath> </File> <File> + <FileName>app_error_handler_keil.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_keil.c</FilePath> </File> <File> + <FileName>app_error_weak.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</FilePath> </File> <File> + <FileName>app_util_platform.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</FilePath> </File> <File> + <FileName>nrf_assert.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</FilePath> </File> <File> + <FileName>nrf_atomic.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</FilePath> </File> <File> + <FileName>nrf_balloc.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</FilePath> </File> <File> + <FileName>nrf_fprintf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</FilePath> </File> <File> + <FileName>nrf_fprintf_format.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</FilePath> </File> <File> + <FileName>nrf_memobj.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</FilePath> </File> <File> + <FileName>nrf_strerror.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Log</GroupName> + <Files> <File> + <FileName>nrf_log_backend_rtt.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</FilePath> </File> <File> + <FileName>nrf_log_backend_serial.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</FilePath> </File> <File> + <FileName>nrf_log_default_backends.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</FilePath> </File> <File> + <FileName>nrf_log_frontend.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</FilePath> </File> <File> + <FileName>nrf_log_str_formatter.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</FilePath> </File> </Files> + </Group> <Group> + <GroupName>nRF_Segger_RTT</GroupName> + <Files> <File> + <FileName>SEGGER_RTT.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_Syscalls_KEIL.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_KEIL.c</FilePath> </File> <File> + <FileName>SEGGER_RTT_printf.c</FileName> + <FileType>1</FileType> + <FilePath>..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</FilePath> </File> </Files> + </Group> </Groups> + </Target> </Targets><RTE> + <packages> + <filter> + <targetInfos/> + </filter> <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </package> </packages> + <apis/> + <components> <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core"> + <package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> + <component Cclass="Device" Cgroup="Startup" Cvendor="NordicSemiconductor" Cversion="8.16.0" condition="nRF5x Series CMSIS Device"> + <package name="nRF_DeviceFamilyPack" url="http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/" vendor="NordicSemiconductor" version="8.16.0"/> + <targetInfos> <targetInfo name="nrf52840_xxaa" versionMatchMode="fixed"/> </targetInfos> + </component> </components> + <files> </files> +</RTE> +</Project> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/armgcc/Makefile new file mode 100644 index 0000000..eeac215 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/armgcc/Makefile @@ -0,0 +1,175 @@ +PROJECT_NAME := wireless_uart_secure_second_pca10056 +TARGETS := nrf52840_xxaa +OUTPUT_DIRECTORY := _build + +SDK_ROOT := ../../../../../../../.. +PROJ_DIR := ../../.. + +$(OUTPUT_DIRECTORY)/nrf52840_xxaa.out: \ + LINKER_SCRIPT := wireless_uart_secure_second_gcc_nrf52.ld + +# Source files common to all targets +SRC_FILES += \ + $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52840.S \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_rtt.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_backend_serial.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_default_backends.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \ + $(SDK_ROOT)/components/libraries/util/app_error.c \ + $(SDK_ROOT)/components/libraries/util/app_error_handler_gcc.c \ + $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ + $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ + $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ + $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \ + $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \ + $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \ + $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ + $(SDK_ROOT)/components/802_15_4/src/rng_entity.c \ + $(SDK_ROOT)/components/802_15_4/src/sec_aes_entity.c \ + $(SDK_ROOT)/components/boards/boards.c \ + $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ + $(SDK_ROOT)/modules/nrfx/hal/nrf_ecb.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ + $(PROJ_DIR)/../../assert.c \ + $(PROJ_DIR)/../../fsm.c \ + $(PROJ_DIR)/../../main.c \ + $(PROJ_DIR)/../../security.c \ + $(PROJ_DIR)/../../uart.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_Syscalls_GCC.c \ + $(SDK_ROOT)/external/segger_rtt/SEGGER_RTT_printf.c \ + $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52840.c \ + +# Include folders common to all targets +INC_FOLDERS += \ + $(SDK_ROOT)/integration/nrfx \ + $(SDK_ROOT)/components/802_15_4/api/RAL \ + $(SDK_ROOT)/components/libraries/experimental_log/src \ + $(SDK_ROOT)/components/802_15_4/api/SysAL \ + ../config \ + $(SDK_ROOT)/components/libraries/experimental_section_vars \ + $(SDK_ROOT)/components/802_15_4/api/HAL/nrf52_soc \ + $(SDK_ROOT)/modules/nrfx/mdk \ + $(SDK_ROOT)/components/libraries/strerror \ + $(SDK_ROOT)/components/boards \ + $(SDK_ROOT)/components/802_15_4/api/HAL \ + $(SDK_ROOT)/components/libraries/experimental_memobj \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ + $(SDK_ROOT)/modules/nrfx/hal \ + $(SDK_ROOT)/components/802_15_4/api/PHY \ + $(SDK_ROOT)/modules/nrfx/drivers/include \ + $(SDK_ROOT)/components/802_15_4 \ + $(SDK_ROOT)/external/fprintf \ + $(SDK_ROOT)/components/802_15_4/api/MAC \ + $(SDK_ROOT)/components/libraries/balloc \ + $(SDK_ROOT)/components/libraries/util \ + $(SDK_ROOT)/modules/nrfx \ + $(SDK_ROOT)/external/segger_rtt \ + $(SDK_ROOT)/integration/nrfx/legacy \ + $(SDK_ROOT)/components/libraries/experimental_log \ + $(PROJ_DIR)/../.. \ + $(SDK_ROOT)/components/libraries/atomic \ + $(SDK_ROOT)/components/libraries/delay \ + $(SDK_ROOT)/components/802_15_4/api/SecAL \ + $(SDK_ROOT)/components/toolchain/cmsis/include \ + $(SDK_ROOT)/components/802_15_4/secure \ + $(SDK_ROOT)/components/802_15_4/api/RAL/nrf52_soc \ + +# Libraries common to all targets +LIB_FILES += \ + $(SDK_ROOT)/components/802_15_4/secure/802_15_4_lib_gcc.a \ + +# Optimization flags +OPT = -O3 -g3 +# Uncomment the line below to enable link time optimization +#OPT += -flto + +# C flags common to all targets +CFLAGS += $(OPT) +CFLAGS += -DBOARD_PCA10056 +CFLAGS += -DCONFIG_GPIO_AS_PINRESET +CFLAGS += -DFLOAT_ABI_HARD +CFLAGS += -DNRF52840_XXAA +CFLAGS += -DRETARGET_ENABLED=1 +CFLAGS += -mcpu=cortex-m4 +CFLAGS += -mthumb -mabi=aapcs +CFLAGS += -Wall -Werror +CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# keep every function in a separate section, this allows linker to discard unused ones +CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing +CFLAGS += -fno-builtin -fshort-enums + +# C++ flags common to all targets +CXXFLAGS += $(OPT) + +# Assembler flags common to all targets +ASMFLAGS += -g3 +ASMFLAGS += -mcpu=cortex-m4 +ASMFLAGS += -mthumb -mabi=aapcs +ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +ASMFLAGS += -DBOARD_PCA10056 +ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET +ASMFLAGS += -DFLOAT_ABI_HARD +ASMFLAGS += -DNRF52840_XXAA +ASMFLAGS += -DRETARGET_ENABLED=1 + +# Linker flags +LDFLAGS += $(OPT) +LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) +LDFLAGS += -mcpu=cortex-m4 +LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# let linker dump unused sections +LDFLAGS += -Wl,--gc-sections +# use newlib in nano version +LDFLAGS += --specs=nano.specs + +nrf52840_xxaa: CFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: CFLAGS += -D__STACK_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__HEAP_SIZE=8192 +nrf52840_xxaa: ASMFLAGS += -D__STACK_SIZE=8192 + +# Add standard libraries at the very end of the linker input, after all objects +# that may need symbols provided by these libraries. +LIB_FILES += -lc -lnosys -lm + + +.PHONY: default help + +# Default target - first one defined +default: nrf52840_xxaa + +# Print all targets that can be built +help: + @echo following targets are available: + @echo nrf52840_xxaa + @echo sdk_config - starting external tool for editing sdk_config.h + @echo flash - flashing binary + +TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc + + +include $(TEMPLATE_PATH)/Makefile.common + +$(foreach target, $(TARGETS), $(call define_target, $(target))) + +.PHONY: flash erase + +# Flash the program +flash: $(OUTPUT_DIRECTORY)/nrf52840_xxaa.hex + @echo Flashing: $< + nrfjprog -f nrf52 --program $< --sectorerase + nrfjprog -f nrf52 --reset + +erase: + nrfjprog -f nrf52 --eraseall + +SDK_CONFIG_FILE := ../config/sdk_config.h +CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar +sdk_config: + java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/armgcc/wireless_uart_secure_second_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/armgcc/wireless_uart_secure_second_gcc_nrf52.ld new file mode 100644 index 0000000..8eec923 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/armgcc/wireless_uart_secure_second_gcc_nrf52.ld @@ -0,0 +1,51 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0x0, LENGTH = 0x100000 + RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x40000 +} + +SECTIONS +{ +} + +SECTIONS +{ + . = ALIGN(4); + .mem_section_dummy_ram : + { + } + .log_dynamic_data : + { + PROVIDE(__start_log_dynamic_data = .); + KEEP(*(SORT(.log_dynamic_data*))) + PROVIDE(__stop_log_dynamic_data = .); + } > RAM + +} INSERT AFTER .data; + +SECTIONS +{ + .mem_section_dummy_rom : + { + } + .log_const_data : + { + PROVIDE(__start_log_const_data = .); + KEEP(*(SORT(.log_const_data*))) + PROVIDE(__stop_log_const_data = .); + } > FLASH + .nrf_balloc : + { + PROVIDE(__start_nrf_balloc = .); + KEEP(*(.nrf_balloc)) + PROVIDE(__stop_nrf_balloc = .); + } > FLASH + +} INSERT AFTER .text + +INCLUDE "nrf_common.ld" diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/config/sdk_config.h new file mode 100644 index 0000000..7492382 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/config/sdk_config.h @@ -0,0 +1,2826 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> Application + +//========================================================== +// <o> CONFIG_DEVICE_SHORT_ADDRESS - Device short address +#ifndef CONFIG_DEVICE_SHORT_ADDRESS +#define CONFIG_DEVICE_SHORT_ADDRESS 11 +#endif + +// <o> CONFIG_OTHER_ADDRESS - Peer device short address +#ifndef CONFIG_OTHER_ADDRESS +#define CONFIG_OTHER_ADDRESS 10 +#endif + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// </e> + +// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend +//========================================================== +#ifndef NRF_LOG_BACKEND_RTT_ENABLED +#define NRF_LOG_BACKEND_RTT_ENABLED 1 +#endif +// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// <i> Size of the buffer is a trade-off between RAM usage and processing. +// <i> if buffer is smaller then strings will often be fragmented. +// <i> It is recommended to use size which will fit typical log and only the +// <i> longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS +#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. +// <i> If RTT fails to accept any new data after retries +// <i> module assumes that host is not active and on next +// <i> request it will perform only one write attempt. +// <i> On successful writing, module assumes that host is active +// <i> and scheme with retry is applied again. + +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT +#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 +#endif + +// </e> + +// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 1 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 0 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Segger_RTT + +//========================================================== +// <h> segger_rtt - SEGGER RTT + +//========================================================== +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// <i> or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// <i> The following modes are supported: +// <i> - SKIP - Do not block, output nothing. +// <i> - TRIM - Do not block, output as much as fits. +// <i> - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_iar_nRF5x.icf new file mode 100644 index 0000000..8e25f22 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_iar_nRF5x.icf @@ -0,0 +1,36 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x0; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x0; +define symbol __ICFEDIT_region_ROM_end__ = 0xfffff; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003ffff; +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 8192; +define symbol __ICFEDIT_size_heap__ = 8192; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; +define block RO_END with alignment = 8, size = 0 { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly, + block RO_END }; +place in RAM_region { readwrite, + block CSTACK, + block HEAP }; + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_pca10056.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_pca10056.ewd new file mode 100644 index 0000000..a846fea --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_pca10056.ewd @@ -0,0 +1,1350 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>C-SPY</name> + <archiveVersion>2</archiveVersion> + <data> + <version>26</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CInput</name> + <state>1</state> + </option> + <option> + <name>CEndian</name> + <state>1</state> + </option> + <option> + <name>CProcessor</name> + <state>1</state> + </option> + <option> + <name>OCVariant</name> + <state>0</state> + </option> + <option> + <name>MacOverride</name> + <state>0</state> + </option> + <option> + <name>MacFile</name> + <state></state> + </option> + <option> + <name>MemOverride</name> + <state>0</state> + </option> + <option> + <name>MemFile</name> + <state>$TOOLKIT_DIR$\CONFIG\debugger\NordicSemiconductor\iar_nrf52840_xxaa.ddf</state> + </option> + <option> + <name>RunToEnable</name> + <state>1</state> + </option> + <option> + <name>RunToName</name> + <state>main</state> + </option> + <option> + <name>CExtraOptionsCheck</name> + <state>1</state> + </option> + <option> + <name>CExtraOptions</name> + <state>--drv_vector_table_base=0x0</state> + </option> + <option> + <name>CFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OCDDFArgumentProducer</name> + <state></state> + </option> + <option> + <name>OCDownloadSuppressDownload</name> + <state>0</state> + </option> + <option> + <name>OCDownloadVerifyAll</name> + <state>0</state> + </option> + <option> + <name>OCProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDynDriverList</name> + <state>JLINK_ID</state> + </option> + <option> + <name>OCLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>OCDownloadAttachToProgram</name> + <state>0</state> + </option> + <option> + <name>UseFlashLoader</name> + <state>0</state> + </option> + <option> + <name>CLowLevel</name> + <state>1</state> + </option> + <option> + <name>OCBE8Slave</name> + <state>1</state> + </option> + <option> + <name>MacFile2</name> + <state></state> + </option> + <option> + <name>CDevice</name> + <state>1</state> + </option> + <option> + <name>FlashLoadersV3</name> + <state>$TOOLKIT_DIR$\config\flashloader\NordicSemiconductor\nrf52840_xxaa.board</state> + </option> + <option> + <name>OCImagesSuppressCheck1</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath1</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck2</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath2</name> + <state></state> + </option> + <option> + <name>OCImagesSuppressCheck3</name> + <state>0</state> + </option> + <option> + <name>OCImagesPath3</name> + <state></state> + </option> + <option> + <name>OverrideDefFlashBoard</name> + <state>0</state> + </option> + <option> + <name>OCImagesOffset1</name> + <state></state> + </option> + <option> + <name>OCImagesOffset2</name> + <state></state> + </option> + <option> + <name>OCImagesOffset3</name> + <state></state> + </option> + <option> + <name>OCImagesUse1</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse2</name> + <state>0</state> + </option> + <option> + <name>OCImagesUse3</name> + <state>0</state> + </option> + <option> + <name>OCDeviceConfigMacroFile</name> + <state>1</state> + </option> + <option> + <name>OCDebuggerExtraOption</name> + <state>1</state> + </option> + <option> + <name>OCAllMTBOptions</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreNrOfCores</name> + <state>1</state> + </option> + <option> + <name>OCMulticoreMaster</name> + <state>0</state> + </option> + <option> + <name>OCMulticorePort</name> + <state>53461</state> + </option> + <option> + <name>OCMulticoreWorkspace</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveProject</name> + <state></state> + </option> + <option> + <name>OCMulticoreSlaveConfiguration</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ARMSIM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCSimDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCSimEnablePSP</name> + <state>0</state> + </option> + <option> + <name>OCSimPspOverrideConfig</name> + <state>0</state> + </option> + <option> + <name>OCSimPspConfigFile</name> + <state></state> + </option> + </data> + </settings> + <settings> + <name>ANGEL_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCAngelHeartbeat</name> + <state>1</state> + </option> + <option> + <name>CAngelCommunication</name> + <state>1</state> + </option> + <option> + <name>CAngelCommBaud</name> + <version>0</version> + <state>3</state> + </option> + <option> + <name>CAngelCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>ANGELTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoAngelLogfile</name> + <state>0</state> + </option> + <option> + <name>AngelLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CMSISDAP_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>CMSISDAPResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>CMSISDAPHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>CMSISDAPHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>CMSISDAPDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CMSISDAPInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CMSISDAPBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>CMSISDAPProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>CMSISDAPSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>GDBSERVER_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + </data> + </settings> + <settings> + <name>IARROM_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRomLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRomLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CRomCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CRomCommBaud</name> + <version>0</version> + <state>7</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IJET_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>IjetAttachSlave</name> + <state>1</state> + </option> + <option> + <name>OCIarProbeScriptFile</name> + <state>1</state> + </option> + <option> + <name>IjetResetList</name> + <version>1</version> + <state>10</state> + </option> + <option> + <name>IjetHWResetDuration</name> + <state>300</state> + </option> + <option> + <name>IjetHWResetDelay</name> + <state>200</state> + </option> + <option> + <name>IjetPowerFromProbe</name> + <state>1</state> + </option> + <option> + <name>IjetPowerRadio</name> + <state>0</state> + </option> + <option> + <name>IjetDoLogfile</name> + <state>0</state> + </option> + <option> + <name>IjetLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>IjetInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>IjetInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTargetEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiTarget</name> + <state>0</state> + </option> + <option> + <name>IjetScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>IjetIRLength</name> + <state>0</state> + </option> + <option> + <name>IjetJtagSpeedList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IjetProtocolRadio</name> + <state>0</state> + </option> + <option> + <name>IjetSwoPin</name> + <state>0</state> + </option> + <option> + <name>IjetCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>IjetSwoPrescalerList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>IjetBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>IjetRestoreBreakpointsCheck</name> + <state>0</state> + </option> + <option> + <name>IjetUpdateBreakpointsEdit</name> + <state>_call_main</state> + </option> + <option> + <name>RDICatchReset</name> + <state>0</state> + </option> + <option> + <name>RDICatchUndef</name> + <state>1</state> + </option> + <option> + <name>RDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>RDICatchData</name> + <state>1</state> + </option> + <option> + <name>RDICatchPrefetch</name> + <state>1</state> + </option> + <option> + <name>RDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>RDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CatchMMERR</name> + <state>1</state> + </option> + <option> + <name>CatchNOCPERR</name> + <state>1</state> + </option> + <option> + <name>CatchCHKERR</name> + <state>1</state> + </option> + <option> + <name>CatchSTATERR</name> + <state>1</state> + </option> + <option> + <name>CatchBUSERR</name> + <state>1</state> + </option> + <option> + <name>CatchINTERR</name> + <state>1</state> + </option> + <option> + <name>CatchHARDERR</name> + <state>1</state> + </option> + <option> + <name>CatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCProbeCfgOverride</name> + <state>0</state> + </option> + <option> + <name>OCProbeConfig</name> + <state></state> + </option> + <option> + <name>IjetProbeConfigRadio</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUEnable</name> + <state>0</state> + </option> + <option> + <name>IjetMultiCPUNumber</name> + <state>0</state> + </option> + <option> + <name>IjetSelectedCPUBehaviour</name> + <state>0</state> + </option> + <option> + <name>ICpuName</name> + <state></state> + </option> + <option> + <name>OCJetEmuParams</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>JLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>15</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>JLinkSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCJLinkDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCJLinkLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCJLinkHWResetDelay</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>JLinkInitialSpeed</name> + <state>1000</state> + </option> + <option> + <name>CCDoJlinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCScanChainNonARMDevices</name> + <state>0</state> + </option> + <option> + <name>CCJLinkMultiTarget</name> + <state>0</state> + </option> + <option> + <name>CCJLinkIRLength</name> + <state>0</state> + </option> + <option> + <name>CCJLinkCommRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkTCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>CCJLinkSpeedRadioV2</name> + <state>0</state> + </option> + <option> + <name>CCUSBDevice</name> + <version>1</version> + <state>1</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>CCJLinkBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJLinkDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJLinkUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCJLinkInterfaceRadio</name> + <state>1</state> + </option> + <option> + <name>OCJLinkAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCJLinkResetList</name> + <version>6</version> + <state>7</state> + </option> + <option> + <name>CCJLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCCatchCORERESET</name> + <state>0</state> + </option> + <option> + <name>CCCatchMMERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchNOCPERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchCHRERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchSTATERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchBUSERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchINTERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchHARDERR</name> + <state>0</state> + </option> + <option> + <name>CCCatchDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkScriptFile</name> + <state>1</state> + </option> + <option> + <name>CCJLinkUsbSerialNo</name> + <state></state> + </option> + <option> + <name>CCTcpIpAlt</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJLinkTcpIpSerialNo</name> + <state></state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + <option> + <name>OCJLinkTraceSource</name> + <state>0</state> + </option> + <option> + <name>OCJLinkTraceSourceDummy</name> + <state>0</state> + </option> + <option> + <name>OCJLinkDeviceName</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>LMIFTDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>LmiftdiSpeed</name> + <state>500</state> + </option> + <option> + <name>CCLmiftdiDoLogfile</name> + <state>0</state> + </option> + <option> + <name>CCLmiftdiLogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCLmiFtdiInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCLmiFtdiInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>MACRAIGOR_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>3</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>jtag</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>EmuSpeed</name> + <state>1</state> + </option> + <option> + <name>TCPIP</name> + <state>aaa.bbb.ccc.ddd</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>DoEmuMultiTarget</name> + <state>0</state> + </option> + <option> + <name>EmuMultiTarget</name> + <state>0@ARM7TDMI</state> + </option> + <option> + <name>EmuHWReset</name> + <state>0</state> + </option> + <option> + <name>CEmuCommBaud</name> + <version>0</version> + <state>4</state> + </option> + <option> + <name>CEmuCommPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>jtago</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>UnusedAddr</name> + <state>0x00800000</state> + </option> + <option> + <name>CCMacraigorHWResetDelay</name> + <state></state> + </option> + <option> + <name>CCJTagBreakpointRadio</name> + <state>0</state> + </option> + <option> + <name>CCJTagDoUpdateBreakpoints</name> + <state>0</state> + </option> + <option> + <name>CCJTagUpdateBreakpoints</name> + <state>_call_main</state> + </option> + <option> + <name>CCMacraigorInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCMacraigorInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>PEMICRO_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCPEMicroAttachSlave</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroInterfaceList</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroResetDelay</name> + <state></state> + </option> + <option> + <name>CCPEMicroJtagSpeed</name> + <state>#UNINITIALIZED#</state> + </option> + <option> + <name>CCJPEMicroShowSettings</name> + <state>0</state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCPEMicroUSBDevice</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCPEMicroSerialPort</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CCJPEMicroTCPIPAutoScanNetwork</name> + <state>1</state> + </option> + <option> + <name>CCPEMicroTCPIP</name> + <state>10.0.0.1</state> + </option> + <option> + <name>CCPEMicroCommCmdLineProducer</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>RDI_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CRDIDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CRDILogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CRDILogFileEdit</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>CCRDIHWReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchReset</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchUndef</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchSWI</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchData</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchPrefetch</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchIRQ</name> + <state>0</state> + </option> + <option> + <name>CCRDICatchFIQ</name> + <state>0</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>STLINK_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>CCSTLinkInterfaceRadio</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkInterfaceCmdLine</name> + <state>0</state> + </option> + <option> + <name>CCSTLinkResetList</name> + <version>1</version> + <state>0</state> + </option> + <option> + <name>CCCpuClockEdit</name> + <state>72.0</state> + </option> + <option> + <name>CCSwoClockAuto</name> + <state>0</state> + </option> + <option> + <name>CCSwoClockEdit</name> + <state>2000</state> + </option> + </data> + </settings> + <settings> + <name>THIRDPARTY_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CThirdPartyDriverDll</name> + <state>###Uninitialized###</state> + </option> + <option> + <name>CThirdPartyLogFileCheck</name> + <state>0</state> + </option> + <option> + <name>CThirdPartyLogFileEditB</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>XDS100_ID</name> + <archiveVersion>2</archiveVersion> + <data> + <version>2</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OCDriverInfo</name> + <state>1</state> + </option> + <option> + <name>OCXDS100AttachSlave</name> + <state>1</state> + </option> + <option> + <name>TIPackageOverride</name> + <state>0</state> + </option> + <option> + <name>TIPackage</name> + <state></state> + </option> + <option> + <name>CCXds100InterfaceList</name> + <version>2</version> + <state>0</state> + </option> + <option> + <name>BoardFile</name> + <state></state> + </option> + <option> + <name>DoLogfile</name> + <state>0</state> + </option> + <option> + <name>LogFile</name> + <state>$PROJ_DIR$\cspycomm.log</state> + </option> + </data> + </settings> + <debuggerPlugins> + <plugin> + <file>$TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file> + <loadFlag>1</loadFlag> + </plugin> + <plugin> + <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file> + <loadFlag>0</loadFlag> + </plugin> + </debuggerPlugins> + </configuration></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_pca10056.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_pca10056.ewp new file mode 100644 index 0000000..03f846f --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/iar/wireless_uart_secure_second_pca10056.ewp @@ -0,0 +1,1064 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + + +<project> + <fileVersion>2</fileVersion> <configuration> + <name>nrf52840_xxaa</name> + <toolchain> + <name>ARM</name> + </toolchain> + <debug>0</debug> + <settings> + <name>General</name> + <archiveVersion>3</archiveVersion> + <data> + <version>22</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>ExePath</name> + <state>_build</state> + </option> + <option> + <name>ObjPath</name> + <state>_build</state> + </option> + <option> + <name>ListPath</name> + <state>_build</state> + </option> + <option> + <name>Variant</name> + <version>20</version> + <state>34</state> + </option> + <option> + <name>GEndianMode</name> + <state>0</state> + </option> + <option> + <name>Input variant</name> + <version>3</version> + <state>1</state> + </option> + <option> + <name>Input description</name> + <state>Full formatting.</state> + </option> + <option> + <name>Output variant</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>Output description</name> + <state>Full formatting.</state> + </option> + <option> + <name>GOutputBinary</name> + <state>0</state> + </option> + <option> + <name>FPU</name> + <version>2</version> + <state>5</state> + </option> + <option> + <name>OGCoreOrChip</name> + <state>1</state> + </option> + <option> + <name>GRuntimeLibSelect</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>GRuntimeLibSelectSlave</name> + <version>0</version> + <state>2</state> + </option> + <option> + <name>RTDescription</name> + <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state> + </option> + <option> + <name>OGProductVersion</name> + <state>6.10.3.52260</state> + </option> + <option> + <name>OGLastSavedByProductVersion</name> + <state>7.20.2.7418</state> + </option> + <option> + <name>GeneralEnableMisra</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraVerbose</name> + <state>0</state> + </option> + <option> + <name>OGChipSelectEditMenu</name> + <state>nrf52840_xxaa nRF52840_xxAA</state> + </option> + <option> + <name>GenLowLevelInterface</name> + <state>0</state> + </option> + <option> + <name>GEndianModeBE</name> + <state>1</state> + </option> + <option> + <name>OGBufferedTerminalOutput</name> + <state>0</state> + </option> + <option> + <name>GenStdoutInterface</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>GeneralMisraVer</name> + <state>0</state> + </option> + <option> + <name>GeneralMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>RTConfigPath2</name> + <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Full.h</state> + </option> + <option> + <name>GFPUCoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>GBECoreSlave</name> + <version>20</version> + <state>39</state> + </option> + <option> + <name>OGUseCmsis</name> + <state>0</state> + </option> + <option> + <name>OGUseCmsisDspLib</name> + <state>0</state> + </option> + <option> + <name>GRuntimeLibThreads</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>ICCARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>31</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>CCGuardCalls</name> + <state>1</state> + </option> + <option> + <name>CCOptimizationNoSizeConstraints</name> + <state>0</state> + </option> + <option> + <name>CCDefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>CCPreprocFile</name> + <state>0</state> + </option> + <option> + <name>CCPreprocComments</name> + <state>0</state> + </option> + <option> + <name>CCPreprocLine</name> + <state>0</state> + </option> + <option> + <name>CCListCFile</name> + <state>0</state> + </option> + <option> + <name>CCListCMnemonics</name> + <state>0</state> + </option> + <option> + <name>CCListCMessages</name> + <state>0</state> + </option> + <option> + <name>CCListAssFile</name> + <state>0</state> + </option> + <option> + <name>CCListAssSource</name> + <state>0</state> + </option> + <option> + <name>CCEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>CCDiagSuppress</name> + <state></state> + </option> + <option> + <name>CCDiagRemark</name> + <state></state> + </option> + <option> + <name>CCDiagWarning</name> + <state></state> + </option> + <option> + <name>CCDiagError</name> + <state></state> + </option> + <option> + <name>CCObjPrefix</name> + <state>1</state> + </option> + <option> + <name>CCAllowList</name> + <version>1</version> + <state>11111110</state> + </option> + <option> + <name>CCDebugInfo</name> + <state>1</state> + </option> + <option> + <name>IEndianMode</name> + <state>1</state> + </option> + <option> + <name>IProcessor</name> + <state>1</state> + </option> + <option> + <name>IExtraOptionsCheck</name> + <state>0</state> + </option> + <option> + <name>IExtraOptions</name> + <state></state> + </option> + <option> + <name>CCLangConformance</name> + <state>0</state> + </option> + <option> + <name>CCSignedPlainChar</name> + <state>1</state> + </option> + <option> + <name>CCRequirePrototypes</name> + <state>0</state> + </option> + <option> + <name>CCMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>CCDiagWarnAreErr</name> + <state>1</state> + </option> + <option> + <name>CCCompilerRuntimeInfo</name> + <state>0</state> + </option> + <option> + <name>IFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>OutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>CCLibConfigHeader</name> + <state>1</state> + </option> + <option> + <name>PreInclude</name> + <state></state> + </option> + <option> + <name>CompilerMisraOverride</name> + <state>0</state> + </option> + <option> + <name>CCIncludePath2</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\secure</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>CCStdIncCheck</name> + <state>0</state> + </option> + <option> + <name>CCCodeSection</name> + <state>.text</state> + </option> + <option> + <name>IInterwork2</name> + <state>0</state> + </option> + <option> + <name>IProcessorMode2</name> + <state>1</state> + </option> + <option> + <name>CCOptLevel</name> + <state>3</state> + </option> + <option> + <name>CCOptStrategy</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CCOptLevelSlave</name> + <state>3</state> + </option> + <option> + <name>CompilerMisraRules98</name> + <version>0</version> + <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state> + </option> + <option> + <name>CompilerMisraRules04</name> + <version>0</version> + <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state> + </option> + <option> + <name>CCPosIndRopi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndRwpi</name> + <state>0</state> + </option> + <option> + <name>CCPosIndNoDynInit</name> + <state>0</state> + </option> + <option> + <name>IccLang</name> + <state>0</state> + </option> + <option> + <name>IccCDialect</name> + <state>1</state> + </option> + <option> + <name>IccAllowVLA</name> + <state>0</state> + </option> + <option> + <name>IccCppDialect</name> + <state>1</state> + </option> + <option> + <name>IccExceptions</name> + <state>1</state> + </option> + <option> + <name>IccRTTI</name> + <state>1</state> + </option> + <option> + <name>IccStaticDestr</name> + <state>1</state> + </option> + <option> + <name>IccCppInlineSemantics</name> + <state>0</state> + </option> + <option> + <name>IccCmsis</name> + <state>1</state> + </option> + <option> + <name>IccFloatSemantics</name> + <state>0</state> + </option> + <option> + <name>CCNoLiteralPool</name> + <state>0</state> + </option> + <option> + <name>CCOptStrategySlave</name> + <version>0</version> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>AARM</name> + <archiveVersion>2</archiveVersion> + <data> + <version>9</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>AObjPrefix</name> + <state>1</state> + </option> + <option> + <name>AEndian</name> + <state>1</state> + </option> + <option> + <name>ACaseSensitivity</name> + <state>1</state> + </option> + <option> + <name>MacroChars</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>AWarnEnable</name> + <state>0</state> + </option> + <option> + <name>AWarnWhat</name> + <state>0</state> + </option> + <option> + <name>AWarnOne</name> + <state></state> + </option> + <option> + <name>AWarnRange1</name> + <state></state> + </option> + <option> + <name>AWarnRange2</name> + <state></state> + </option> + <option> + <name>ADebug</name> + <state></state> + </option> + <option> + <name>AltRegisterNames</name> + <state>0</state> + </option> + <option> + <name>ADefines</name> + <state>BOARD_PCA10056</state> + <state>CONFIG_GPIO_AS_PINRESET</state> + <state>FLOAT_ABI_HARD</state> + <state>NRF52840_XXAA</state> + <state>RETARGET_ENABLED=1</state> + </option> + <option> + <name>AList</name> + <state>0</state> + </option> + <option> + <name>AListHeader</name> + <state>1</state> + </option> + <option> + <name>AListing</name> + <state>1</state> + </option> + <option> + <name>Includes</name> + <state>0</state> + </option> + <option> + <name>MacDefs</name> + <state>0</state> + </option> + <option> + <name>MacExps</name> + <state>1</state> + </option> + <option> + <name>MacExec</name> + <state>0</state> + </option> + <option> + <name>OnlyAssed</name> + <state>0</state> + </option> + <option> + <name>MultiLine</name> + <state>0</state> + </option> + <option> + <name>PageLengthCheck</name> + <state>0</state> + </option> + <option> + <name>PageLength</name> + <state>80</state> + </option> + <option> + <name>TabSpacing</name> + <state>8</state> + </option> + <option> + <name>AXRef</name> + <state>0</state> + </option> + <option> + <name>AXRefDefines</name> + <state>0</state> + </option> + <option> + <name>AXRefInternal</name> + <state>0</state> + </option> + <option> + <name>AXRefDual</name> + <state>0</state> + </option> + <option> + <name>AProcessor</name> + <state>1</state> + </option> + <option> + <name>AFpuProcessor</name> + <state>1</state> + </option> + <option> + <name>AOutputFile</name> + <state>$FILE_BNAME$.o</state> + </option> + <option> + <name>AMultibyteSupport</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsCheck</name> + <state>0</state> + </option> + <option> + <name>ALimitErrorsEdit</name> + <state>100</state> + </option> + <option> + <name>AIgnoreStdInclude</name> + <state>0</state> + </option> + <option> + <name>AUserIncludes</name> + <state>$PROJ_DIR$\..\..\..\config</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\HAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\MAC</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\PHY</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\RAL\nrf52_soc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SecAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\api\SysAL</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\secure</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\delay</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_section_vars</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\toolchain\cmsis\include</state> + <state>$PROJ_DIR$\..\..\..\..\..</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\include</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal</state> + <state>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk</state> + <state>$PROJ_DIR$\..\config</state> + </option> + <option> + <name>AExtraOptionsCheckV2</name> + <state>0</state> + </option> + <option> + <name>AExtraOptionsV2</name> + <state></state> + </option> + <option> + <name>AsmNoLiteralPool</name> + <state>0</state> + </option> + </data> + </settings> + <settings> + <name>OBJCOPY</name> + <archiveVersion>0</archiveVersion> + <data> + <version>1</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>OOCOutputFormat</name> + <version>2</version> + <state>1</state> + </option> + <option> + <name>OCOutputOverride</name> + <state>1</state> + </option> + <option> + <name>OOCOutputFile</name> + <state>wireless_uart_secure_second_pca10056.hex</state> + </option> + <option> + <name>OOCCommandLineProducer</name> + <state>1</state> + </option> + <option> + <name>OOCObjCopyEnable</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>CUSTOM</name> + <archiveVersion>3</archiveVersion> + <data> + <extensions></extensions> + <cmdline></cmdline> + </data> + </settings> + <settings> + <name>BICOMP</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + <settings> + <name>BUILDACTION</name> + <archiveVersion>1</archiveVersion> + <data> + <prebuild></prebuild> + <postbuild></postbuild> + </data> + </settings> + <settings> + <name>ILINK</name> + <archiveVersion>0</archiveVersion> + <data> + <version>16</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IlinkLibIOConfig</name> + <state>1</state> + </option> + <option> + <name>XLinkMisraHandler</name> + <state>0</state> + </option> + <option> + <name>IlinkInputFileSlave</name> + <state>0</state> + </option> + <option> + <name>IlinkOutputFile</name> + <state>wireless_uart_secure_second_pca10056.out</state> + </option> + <option> + <name>IlinkDebugInfoEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkKeepSymbols</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryFile</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySymbol</name> + <state></state> + </option> + <option> + <name>IlinkRawBinarySegment</name> + <state></state> + </option> + <option> + <name>IlinkRawBinaryAlign</name> + <state></state> + </option> + <option> + <name>IlinkDefines</name> + <state></state> + </option> + <option> + <name>IlinkConfigDefines</name> + <state></state> + </option> + <option> + <name>IlinkMapFile</name> + <state>1</state> + </option> + <option> + <name>IlinkLogFile</name> + <state>0</state> + </option> + <option> + <name>IlinkLogInitialization</name> + <state>0</state> + </option> + <option> + <name>IlinkLogModule</name> + <state>0</state> + </option> + <option> + <name>IlinkLogSection</name> + <state>0</state> + </option> + <option> + <name>IlinkLogVeneer</name> + <state>0</state> + </option> + <option> + <name>IlinkIcfOverride</name> + <state>1</state> + </option> + <option> + <name>IlinkIcfFile</name> + <state>$PROJ_DIR$\wireless_uart_secure_second_iar_nRF5x.icf</state> + </option> + <option> + <name>IlinkIcfFileSlave</name> + <state></state> + </option> + <option> + <name>IlinkEnableRemarks</name> + <state>0</state> + </option> + <option> + <name>IlinkSuppressDiags</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsRem</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsWarn</name> + <state></state> + </option> + <option> + <name>IlinkTreatAsErr</name> + <state></state> + </option> + <option> + <name>IlinkWarningsAreErrors</name> + <state>1</state> + </option> + <option> + <name>IlinkUseExtraOptions</name> + <state>0</state> + </option> + <option> + <name>IlinkExtraOptions</name> + <state></state> + </option> + <option> + <name>IlinkLowLevelInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>IlinkAutoLibEnable</name> + <state>1</state> + </option> + <option> + <name>IlinkAdditionalLibs</name> + <state></state> + </option> + <option> + <name>IlinkOverrideProgramEntryLabel</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabelSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkProgramEntryLabel</name> + <state>__iar_program_start</state> + </option> + <option> + <name>DoFill</name> + <state>0</state> + </option> + <option> + <name>FillerByte</name> + <state>0xFF</state> + </option> + <option> + <name>FillerStart</name> + <state>0x0</state> + </option> + <option> + <name>FillerEnd</name> + <state>0x0</state> + </option> + <option> + <name>CrcSize</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcAlign</name> + <state>1</state> + </option> + <option> + <name>CrcPoly</name> + <state>0x11021</state> + </option> + <option> + <name>CrcCompl</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcBitOrder</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>CrcInitialValue</name> + <state>0x0</state> + </option> + <option> + <name>DoCrc</name> + <state>0</state> + </option> + <option> + <name>IlinkBE8Slave</name> + <state>1</state> + </option> + <option> + <name>IlinkBufferedTerminalOutput</name> + <state>1</state> + </option> + <option> + <name>IlinkStdoutInterfaceSlave</name> + <state>1</state> + </option> + <option> + <name>CrcFullSize</name> + <state>0</state> + </option> + <option> + <name>IlinkIElfToolPostProcess</name> + <state>0</state> + </option> + <option> + <name>IlinkLogAutoLibSelect</name> + <state>0</state> + </option> + <option> + <name>IlinkLogRedirSymbols</name> + <state>0</state> + </option> + <option> + <name>IlinkLogUnusedFragments</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcReverseByteOrder</name> + <state>0</state> + </option> + <option> + <name>IlinkCrcUseAsInput</name> + <state>1</state> + </option> + <option> + <name>IlinkOptInline</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsAllow</name> + <state>1</state> + </option> + <option> + <name>IlinkOptExceptionsForce</name> + <state>0</state> + </option> + <option> + <name>IlinkCmsis</name> + <state>1</state> + </option> + <option> + <name>IlinkOptMergeDuplSections</name> + <state>0</state> + </option> + <option> + <name>IlinkOptUseVfe</name> + <state>1</state> + </option> + <option> + <name>IlinkOptForceVfe</name> + <state>0</state> + </option> + <option> + <name>IlinkStackAnalysisEnable</name> + <state>0</state> + </option> + <option> + <name>IlinkStackControlFile</name> + <state></state> + </option> + <option> + <name>IlinkStackCallGraphFile</name> + <state></state> + </option> + <option> + <name>CrcAlgorithm</name> + <version>0</version> + <state>1</state> + </option> + <option> + <name>CrcUnitSize</name> + <version>0</version> + <state>0</state> + </option> + <option> + <name>IlinkThreadsSlave</name> + <state>1</state> + </option> + </data> + </settings> + <settings> + <name>IARCHIVE</name> + <archiveVersion>0</archiveVersion> + <data> + <version>0</version> + <wantNonLocal>1</wantNonLocal> + <debug>0</debug> + <option> + <name>IarchiveInputs</name> + <state></state> + </option> + <option> + <name>IarchiveOverride</name> + <state>0</state> + </option> + <option> + <name>IarchiveOutput</name> + <state>###Unitialized###</state> + </option> + </data> + </settings> + <settings> + <name>BILINK</name> + <archiveVersion>0</archiveVersion> + <data/> + </settings> + </configuration> <group> + <name>nRF_Log</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_rtt.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_backend_serial.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_default_backends.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c</name> </file> </group> <group> + <name>nRF_Libraries</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_handler_iar.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_error_weak.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\app_util_platform.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\util\nrf_assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c</name> </file> </group> <group> + <name>nRF_802_15_4</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\secure\802_15_4_lib_iar.a</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\src\rng_entity.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\802_15_4\src\sec_aes_entity.c</name> </file> </group> <group> + <name>Board Definition</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\boards\boards.c</name> </file> </group> <group> + <name>nRF_Drivers</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\hal\nrf_ecb.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c</name> </file> </group> <group> + <name>Application</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\assert.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\fsm.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\main.c</name> </file> <file> + <name>$PROJ_DIR$\..\config\sdk_config.h</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\security.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\uart.c</name> </file> </group> <group> + <name>nRF_Segger_RTT</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_Syscalls_IAR.c</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\external\segger_rtt\SEGGER_RTT_printf.c</name> </file> </group> <group> + <name>None</name> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52840.s</name> </file> <file> + <name>$PROJ_DIR$\..\..\..\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c</name> </file> </group></project> + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/flash_placement.xml new file mode 100644 index 0000000..42d7b71 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/flash_placement.xml @@ -0,0 +1,35 @@ +<!DOCTYPE Linker_Placement_File> +<Root name="Flash Section Placement"> + <MemorySegment name="FLASH" start="$(FLASH_PH_START)" size="$(FLASH_PH_SIZE)"> + <ProgramSection alignment="0x100" load="Yes" name=".vectors" start="$(FLASH_START)" /> + <ProgramSection alignment="4" load="Yes" name=".init" /> + <ProgramSection alignment="4" load="Yes" name=".init_rodata" /> + <ProgramSection alignment="4" load="Yes" name=".text" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_const_data" inputsections="*(SORT(.log_const_data*))" address_symbol="__start_log_const_data" end_symbol="__stop_log_const_data" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".nrf_balloc" inputsections="*(.nrf_balloc*)" address_symbol="__start_nrf_balloc" end_symbol="__stop_nrf_balloc" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections" address_symbol="__start_nrf_sections" /> + <ProgramSection alignment="4" keep="Yes" load="Yes" name=".log_dynamic_data" inputsections="*(SORT(.log_dynamic_data*))" runin=".log_dynamic_data_run"/> + <ProgramSection alignment="4" load="Yes" name=".dtors" /> + <ProgramSection alignment="4" load="Yes" name=".ctors" /> + <ProgramSection alignment="4" load="Yes" name=".rodata" /> + <ProgramSection alignment="4" load="Yes" name=".ARM.exidx" address_symbol="__exidx_start" end_symbol="__exidx_end" /> + <ProgramSection alignment="4" load="Yes" runin=".fast_run" name=".fast" /> + <ProgramSection alignment="4" load="Yes" runin=".data_run" name=".data" /> + <ProgramSection alignment="4" load="Yes" runin=".tdata_run" name=".tdata" /> + </MemorySegment> + <MemorySegment name="RAM" start="$(RAM_PH_START)" size="$(RAM_PH_SIZE)"> + <ProgramSection alignment="0x100" load="No" name=".vectors_ram" start="$(RAM_START)" address_symbol="__app_ram_start__"/> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run" address_symbol="__start_nrf_sections_run" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".log_dynamic_data_run" address_symbol="__start_log_dynamic_data" end_symbol="__stop_log_dynamic_data" /> + <ProgramSection alignment="4" keep="Yes" load="No" name=".nrf_sections_run_end" address_symbol="__end_nrf_sections_run" /> + <ProgramSection alignment="4" load="No" name=".fast_run" /> + <ProgramSection alignment="4" load="No" name=".data_run" /> + <ProgramSection alignment="4" load="No" name=".tdata_run" /> + <ProgramSection alignment="4" load="No" name=".bss" /> + <ProgramSection alignment="4" load="No" name=".tbss" /> + <ProgramSection alignment="4" load="No" name=".non_init" /> + <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap" /> + <ProgramSection alignment="8" size="__STACKSIZE__" load="No" place_from_segment_end="Yes" name=".stack" address_symbol="__StackLimit" end_symbol="__StackTop"/> + <ProgramSection alignment="8" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process" /> + </MemorySegment> +</Root> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/wireless_uart_secure_second_pca10056.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/wireless_uart_secure_second_pca10056.emProject new file mode 100644 index 0000000..7b6621e --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/wireless_uart_secure_second_pca10056.emProject @@ -0,0 +1,97 @@ +<!DOCTYPE CrossStudio_Project_File> +<solution Name="wireless_uart_secure_second_pca10056" target="8" version="2"> + <project Name="wireless_uart_secure_second_pca10056"> + <configuration + Name="Common" + arm_architecture="v7EM" + arm_core_type="Cortex-M4" + arm_endian="Little" + arm_fp_abi="Hard" + arm_fpu_type="FPv4-SP-D16" + arm_linker_heap_size="8192" + arm_linker_process_stack_size="0" + arm_linker_stack_size="8192" + arm_linker_treat_warnings_as_errors="No" + arm_simulator_memory_simulation_parameter="RWX 00000000,00100000,FFFFFFFF;RWX 20000000,00010000,CDCDCDCD" + arm_target_device_name="nRF52840_xxAA" + arm_target_interface_type="SWD" + c_user_include_directories="../../../config;../../../../../../../../components/802_15_4;../../../../../../../../components/802_15_4/api/HAL;../../../../../../../../components/802_15_4/api/HAL/nrf52_soc;../../../../../../../../components/802_15_4/api/MAC;../../../../../../../../components/802_15_4/api/PHY;../../../../../../../../components/802_15_4/api/RAL;../../../../../../../../components/802_15_4/api/RAL/nrf52_soc;../../../../../../../../components/802_15_4/api/SecAL;../../../../../../../../components/802_15_4/api/SysAL;../../../../../../../../components/802_15_4/secure;../../../../../../../../components/boards;../../../../../../../../components/drivers_nrf/nrf_soc_nosd;../../../../../../../../components/libraries/atomic;../../../../../../../../components/libraries/balloc;../../../../../../../../components/libraries/delay;../../../../../../../../components/libraries/experimental_log;../../../../../../../../components/libraries/experimental_log/src;../../../../../../../../components/libraries/experimental_memobj;../../../../../../../../components/libraries/experimental_section_vars;../../../../../../../../components/libraries/strerror;../../../../../../../../components/libraries/util;../../../../../../../../components/toolchain/cmsis/include;../../../../..;../../../../../../../../external/fprintf;../../../../../../../../external/segger_rtt;../../../../../../../../integration/nrfx;../../../../../../../../integration/nrfx/legacy;../../../../../../../../modules/nrfx;../../../../../../../../modules/nrfx/drivers/include;../../../../../../../../modules/nrfx/hal;../../../../../../../../modules/nrfx/mdk;../config;" + c_preprocessor_definitions="BOARD_PCA10056;CONFIG_GPIO_AS_PINRESET;FLOAT_ABI_HARD;INITIALIZE_USER_SECTIONS;NO_VTOR_CONFIG;NRF52840_XXAA;RETARGET_ENABLED=1;" + debug_target_connection="J-Link" + gcc_entry_point="Reset_Handler" + macros="CMSIS_CONFIG_TOOL=../../../../../../../../external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar" + debug_register_definition_file="../../../../../../../../modules/nrfx/mdk/nrf52840.svd" + debug_start_from_entry_point_symbol="No" + gcc_debugging_level="Level 3" linker_output_format="hex" + linker_printf_width_precision_supported="Yes" + linker_printf_fmt_level="long" + linker_section_placement_file="flash_placement.xml" + linker_section_placement_macros="FLASH_PH_START=0x0;FLASH_PH_SIZE=0x100000;RAM_PH_START=0x20000000;RAM_PH_SIZE=0x40000;FLASH_START=0x0;FLASH_SIZE=0x100000;RAM_START=0x20000000;RAM_SIZE=0x40000" + linker_section_placements_segments="FLASH RX 0x0 0x100000;RAM RWX 0x20000000 0x40000" + project_directory="" + project_type="Executable" /> + <folder Name="Segger Startup Files"> + <file file_name="$(StudioDir)/source/thumb_crt0.s" /> + </folder> + <folder Name="nRF_Log"> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_rtt.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_backend_serial.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_default_backends.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_frontend.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_log/src/nrf_log_str_formatter.c" /> + </folder> + <folder Name="nRF_Libraries"> + <file file_name="../../../../../../../../components/libraries/util/app_error.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_handler_gcc.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_error_weak.c" /> + <file file_name="../../../../../../../../components/libraries/util/app_util_platform.c" /> + <file file_name="../../../../../../../../components/libraries/util/nrf_assert.c" /> + <file file_name="../../../../../../../../components/libraries/atomic/nrf_atomic.c" /> + <file file_name="../../../../../../../../components/libraries/balloc/nrf_balloc.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf.c" /> + <file file_name="../../../../../../../../external/fprintf/nrf_fprintf_format.c" /> + <file file_name="../../../../../../../../components/libraries/experimental_memobj/nrf_memobj.c" /> + <file file_name="../../../../../../../../components/libraries/strerror/nrf_strerror.c" /> + </folder> + <folder Name="nRF_802_15_4"> + <file file_name="../../../../../../../../components/802_15_4/secure/802_15_4_lib_gcc.a" /> + <file file_name="../../../../../../../../components/802_15_4/src/rng_entity.c" /> + <file file_name="../../../../../../../../components/802_15_4/src/sec_aes_entity.c" /> + </folder> + <folder Name="Board Definition"> + <file file_name="../../../../../../../../components/boards/boards.c" /> + </folder> + <folder Name="nRF_Drivers"> + <file file_name="../../../../../../../../integration/nrfx/legacy/nrf_drv_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/hal/nrf_ecb.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c" /> + <file file_name="../../../../../../../../components/drivers_nrf/nrf_soc_nosd/nrf_soc.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_clock.c" /> + <file file_name="../../../../../../../../modules/nrfx/drivers/src/nrfx_power_clock.c" /> + </folder> + <folder Name="Application"> + <file file_name="../../../../../assert.c" /> + <file file_name="../../../../../fsm.c" /> + <file file_name="../../../../../main.c" /> + <file file_name="../config/sdk_config.h" /> + <file file_name="../../../../../security.c" /> + <file file_name="../../../../../uart.c" /> + </folder> + <folder Name="nRF_Segger_RTT"> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_Syscalls_SES.c" /> + <file file_name="../../../../../../../../external/segger_rtt/SEGGER_RTT_printf.c" /> + </folder> + <folder Name="None"> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nRF_Startup.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/ses_nrf52840_Vectors.s" /> + <file file_name="../../../../../../../../modules/nrfx/mdk/system_nrf52840.c" /> + </folder> + </project> + <configuration Name="Release" + c_preprocessor_definitions="NDEBUG" + gcc_optimization_level="Optimize For Size" /> + <configuration Name="Debug" + c_preprocessor_definitions="DEBUG; DEBUG_NRF" + gcc_optimization_level="None"/> +</solution> diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/wireless_uart_secure_second_pca10056.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/wireless_uart_secure_second_pca10056.emSession new file mode 100644 index 0000000..844d7a5 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/pca10056/blank/ses/wireless_uart_secure_second_pca10056.emSession @@ -0,0 +1,7 @@ +<!DOCTYPE CrossStudio_Session_File> +<session> + <ARMCrossStudioWindow activeProject="wireless_uart_secure_second_pca10056" buildConfiguration="Release"/> + <Files> + <SessionOpenFile codecName="Default" debugPath="../../../../../main.c" left="0" name="unnamed" path="../../../../../main.c" selected="1" top="0" useBinaryEdit="0" useTextEdit="1" x="0" y="0"/> + </Files> +</session>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/wireless_uart_secure_second.eww b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/wireless_uart_secure_second.eww new file mode 100644 index 0000000..cfa26cf --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/secure/second/wireless_uart_secure_second.eww @@ -0,0 +1,6 @@ +<?xml version="1.0" encoding="iso-8859-1"?> + +<workspace> <project> + <path>$WS_DIR$\pca10056\blank\iar\wireless_uart_secure_second_pca10056.ewp</path> + </project> <batchBuild/> +</workspace>
\ No newline at end of file diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/security.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/security.c new file mode 100644 index 0000000..c2d089a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/security.c @@ -0,0 +1,140 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "config.h" + +#include <string.h> +#include "fsm.h" +#include "mac_security.h" +#include "mac_common.h" +#include "mac_mlme_pib.h" +#include "mac_mlme_comm_status.h" + +#define GET_BYTE(x, n) (((x) >> (n * 8)) & 0xFF) + +const uint8_t m_key_lookup_data[KEY_LOOKUP_SIZE_FIVE_VAL] = {GET_BYTE(CONFIG_PAN_ID, 0), + GET_BYTE(CONFIG_PAN_ID, 1), + GET_BYTE(CONFIG_OTHER_ADDRESS, 0), + GET_BYTE(CONFIG_OTHER_ADDRESS, 1), + 0x00, + }; + +const uint8_t m_security_key[MAC_SECURITY_KEY_SIZE] = CONFIG_SECURITY_KEY; + +void security_tables_init(void) +{ +#if (CONFIG_SECURE == 1) + pib_id_t id; + bool security_enabled; + mac_status_t status; + pib_id_t pib_id; + mac_key_descr_t key_descr; + mac_key_id_lookup_descr_t key_id_lookup_descr; + mac_key_device_descr_t key_device_descr; + mac_key_usage_descr_t key_usage_descr; + mac_security_level_descr_t sec_level_descr; + mac_device_descr_t device_descr; + + id.mlme_id = MAC_SECURITY_ENABLED; + security_enabled = true; + mlme_set(id, 0, &security_enabled); + + mac_table_init(&key_descr.id_lookup_list); + mac_table_init(&key_descr.key_device_list); + mac_table_init(&key_descr.key_usage_list); + + key_id_lookup_descr.size = KEY_LOOKUP_SIZE_FIVE; + memcpy(key_id_lookup_descr.data, m_key_lookup_data, KEY_LOOKUP_SIZE_FIVE_VAL); + status = mac_table_item_set(&key_descr.id_lookup_list, + &key_id_lookup_descr.table_service, + MAC_KEY_ID_LOOKUP_LIST, 0); + ASSERT(status == MAC_SUCCESS); + + key_device_descr.blacklisted = false; + key_device_descr.unique_device = true; + key_device_descr.device_handle = 0; + key_device_descr.table_service.idx = 0; + status = mac_table_item_set(&key_descr.key_device_list, + &key_device_descr.table_service, + MAC_KEY_DEVICE_LIST, 0); + ASSERT(status == MAC_SUCCESS); + + key_usage_descr.frame_type = MAC_DATA; + key_usage_descr.cmd_frame_id = 0; + status = mac_table_item_set(&key_descr.key_usage_list, + &key_usage_descr.table_service, + MAC_KEY_USAGE_LIST, 0); + ASSERT(status == MAC_SUCCESS); + + memcpy(key_descr.key, m_security_key, MAC_SECURITY_KEY_SIZE); + + pib_id.mlme_id = MAC_KEY_TABLE; + status = mlme_set(pib_id, 0, &key_descr); + ASSERT(status == MAC_SUCCESS); + + sec_level_descr.security_min = CONFIG_DATA_SECURITY_LEVEL; + sec_level_descr.frame_type = MAC_DATA; + sec_level_descr.override_min = true; + + device_descr.extended_address = CONFIG_IEEE_ADDRESS + CONFIG_OTHER_ADDRESS; + device_descr.pan_id = CONFIG_PAN_ID; + device_descr.short_address = CONFIG_OTHER_ADDRESS; + device_descr.frame_counter = 0; + device_descr.exempt = 0; + + pib_id.mlme_id = MAC_DEVICE_TABLE; + status = mlme_set(pib_id, 0, &device_descr); + ASSERT(status == MAC_SUCCESS); + + pib_id.mlme_id = MAC_SECURITY_LEVEL_TABLE; + status = mlme_set(pib_id, 0, &sec_level_descr); + ASSERT(status == MAC_SUCCESS); + + fsm_event_post(E_SET_DONE, NULL); + (void)status; +#endif +} + +void mlme_comm_status_ind(mlme_comm_status_ind_t * ind) +{ + ASSERT_INFO(0, "security status: %d", ind->status); +} + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/security.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/security.h new file mode 100644 index 0000000..fa2f835 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/security.h @@ -0,0 +1,45 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "mac_security.h" +#include "mac_common.h" + +void security_tables_init(void); diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/uart.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/uart.c new file mode 100644 index 0000000..33d87c4 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/uart.c @@ -0,0 +1,108 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "config.h" + +#include "fsm.h" +#include "uart.h" +#include "sys_debug.h" +#include "sys_utils.h" +#include "boards.h" + + +static char m_tx_buffer[CONFIG_UART_TX_BUFFER_SIZE]; +static char m_rx_buffer[CONFIG_UART_RX_BUFFER_SIZE]; +static hal_uart_config_t m_uart_config = +{ + .module = CONFIG_UART_MODULE, + .tx_pin = CONFIG_UART_TX_PIN, + .rx_pin = CONFIG_UART_RX_PIN, + .cts_pin = CONFIG_UART_CTS_PIN, + .rts_pin = CONFIG_UART_RTS_PIN, + .baudrate = CONFIG_UART_BAUDRATE, + .parity = CONFIG_UART_PARITY, + .char_size = HAL_UART_EIGHT_BITS_CHAR, + .flow_control = HAL_UART_FLOW_CONTROL_ENABLED, +}; + +static void uart_read_handler(uint32_t channel, size_t char_count); +static void uart_write_handler(uint32_t channel, size_t char_count); +static void uart_error_handler(uint32_t channel, hal_uart_error_t error_description); + +hal_uart_descriptor_t g_uart_descr = +{ + .write_handler = uart_write_handler, + .write_buffer_ptr = m_tx_buffer, + .write_buffer_size = ARRAY_SIZE(m_tx_buffer), + .read_handler = uart_read_handler, + .read_buffer_ptr = m_rx_buffer, + .read_buffer_size = ARRAY_SIZE(m_rx_buffer), + .error_handler = uart_error_handler, +}; + + +void uart_init(void) +{ + g_uart_descr.uart_config = m_uart_config; + + hal_uart_open(&m_uart_config, &g_uart_descr); +} + +static void uart_read_handler(uint32_t channel, size_t char_count) +{ + fsm_event_post(E_UART_RX_DONE, NULL); +} + +static void uart_write_handler(uint32_t channel, size_t char_count) +{ + fsm_event_post(E_UART_TX_DONE, NULL); + LEDS_OFF(BIT(CONFIG_DOWNSTREAM_PIN)); +} + +static void uart_error_handler(uint32_t channel, hal_uart_error_t error_description) +{ + LEDS_ON(BIT(CONFIG_ERROR_PIN)); + ASSERT_INFO(error_description == HAL_UART_ERROR_NONE, + "Unexpected error code %d\n", + error_description); + ASSERT(false); +} + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/uart.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/uart.h new file mode 100644 index 0000000..8c3e518 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/802_15_4/wireless_uart/uart.h @@ -0,0 +1,59 @@ +/** + * Copyright (c) 2016 - 2018 Nordic Semiconductor ASA and Luxoft Global Operations Gmbh. + * + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef UART_H_INCLUDED +#define UART_H_INCLUDED + +#include "hal_uart.h" + +void uart_init(void); + +/**@warning This variable must not be used directly. + * Use accessor function below. + */ +extern hal_uart_descriptor_t g_uart_descr; + +static inline const hal_uart_descriptor_t * uart_descr_get(void) +{ + return &g_uart_descr; +} + +#endif /* UART_H_INCLUDED */ |