diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/connectivity/ble_connectivity/pca10059/ser_s140_usb_hci/config/sdk_config.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/examples/connectivity/ble_connectivity/pca10059/ser_s140_usb_hci/config/sdk_config.h | 4529 |
1 files changed, 4529 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/connectivity/ble_connectivity/pca10059/ser_s140_usb_hci/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/connectivity/ble_connectivity/pca10059/ser_s140_usb_hci/config/sdk_config.h new file mode 100644 index 0000000..6445d16 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/connectivity/ble_connectivity/pca10059/ser_s140_usb_hci/config/sdk_config.h @@ -0,0 +1,4529 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> Application + +//========================================================== +// <h> application_info - Software Component + +//========================================================== +// <s> APP_NAME - Application name +#ifndef APP_NAME +#define APP_NAME "ble-connectivity" +#endif + +// <o> APP_ID - Application ID +#ifndef APP_ID +#define APP_ID 0 +#endif + +// <h> APP_VERSION - Application version (semantic versioning) + +//========================================================== +// <o> APP_VERSION_MAJOR - Major version <0-1000> + + +#ifndef APP_VERSION_MAJOR +#define APP_VERSION_MAJOR 0 +#endif + +// <o> APP_VERSION_MINOR - Minor version <0-1000> + + +#ifndef APP_VERSION_MINOR +#define APP_VERSION_MINOR 1 +#endif + +// <o> APP_VERSION_PATCH - Patch version <0-1000> + + +#ifndef APP_VERSION_PATCH +#define APP_VERSION_PATCH 0 +#endif + +// <s> APP_VERSION_PRERELEASE - Prerelease, eg. "-1.alpha" + +// <i> If not empty, this string should include the leading hyphen (-). +// <i> This string might be normalized at run-time to not contain characters +// <i> illegal in Semantic Versioning. +#ifndef APP_VERSION_PRERELEASE +#define APP_VERSION_PRERELEASE "" +#endif + +// <s> APP_VERSION_METADATA - Metadata, e.g. "+some-string.01-01-2018-23-59-59" + +// <i> If not empty, this string should include the leading plus (+). +// <i> This string might be normalized at run-time to not contain characters +// <i> illegal in Semantic Versioning. +#ifndef APP_VERSION_METADATA +#define APP_VERSION_METADATA "+" __DATE__ " " __TIME__ +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> Board Definition + +//========================================================== +// <h> nrf_dfu_trigger_usb - USB DFU Trigger library + +//========================================================== +// <q> NRF_DFU_TRIGGER_USB_USB_SHARED - Flag indicating whether USB is used for other purposes in the application. + + +#ifndef NRF_DFU_TRIGGER_USB_USB_SHARED +#define NRF_DFU_TRIGGER_USB_USB_SHARED 1 +#endif + +// <o> NRF_DFU_TRIGGER_USB_INTERFACE_NUM - The USB interface to use for the DFU Trigger library. <0-255> + + +// <i> According to the USB Specification, interface numbers cannot have +// <i> gaps. Tailor this value to adhere to this limitation. + +#ifndef NRF_DFU_TRIGGER_USB_INTERFACE_NUM +#define NRF_DFU_TRIGGER_USB_INTERFACE_NUM 2 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_BLE + +//========================================================== +// <q> BLE_DTM_ENABLED - ble_dtm - Module for testing RF/PHY using DTM commands + + +#ifndef BLE_DTM_ENABLED +#define BLE_DTM_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Drivers + +//========================================================== +// <e> CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// </e> + +// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver +//========================================================== +#ifndef NRFX_POWER_ENABLED +#define NRFX_POWER_ENABLED 1 +#endif +// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY +#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// <i> This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN +#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// <i> This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV +#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// </e> + +// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module +//========================================================== +#ifndef NRFX_PRS_ENABLED +#define NRFX_PRS_ENABLED 1 +#endif +// <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. + + +#ifndef NRFX_PRS_BOX_0_ENABLED +#define NRFX_PRS_BOX_0_ENABLED 0 +#endif + +// <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. + + +#ifndef NRFX_PRS_BOX_1_ENABLED +#define NRFX_PRS_BOX_1_ENABLED 0 +#endif + +// <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. + + +#ifndef NRFX_PRS_BOX_2_ENABLED +#define NRFX_PRS_BOX_2_ENABLED 0 +#endif + +// <q> NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module. + + +#ifndef NRFX_PRS_BOX_3_ENABLED +#define NRFX_PRS_BOX_3_ENABLED 0 +#endif + +// <q> NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module. + + +#ifndef NRFX_PRS_BOX_4_ENABLED +#define NRFX_PRS_BOX_4_ENABLED 1 +#endif + +// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_PRS_CONFIG_LOG_ENABLED +#define NRFX_PRS_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_PRS_CONFIG_LOG_LEVEL +#define NRFX_PRS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PRS_CONFIG_INFO_COLOR +#define NRFX_PRS_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR +#define NRFX_PRS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver +//========================================================== +#ifndef NRFX_UARTE_ENABLED +#define NRFX_UARTE_ENABLED 1 +#endif +// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance +#ifndef NRFX_UARTE0_ENABLED +#define NRFX_UARTE0_ENABLED 0 +#endif + +// <o> NRFX_UARTE1_ENABLED - Enable UARTE1 instance +#ifndef NRFX_UARTE1_ENABLED +#define NRFX_UARTE1_ENABLED 0 +#endif + +// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC +#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0 +#endif + +// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY +#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0 +#endif + +// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <8388608=> 31250 baud +// <10289152=> 38400 baud +// <15007744=> 56000 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE +#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920 +#endif + +// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED +#define NRFX_UARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL +#define NRFX_UARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UARTE_CONFIG_INFO_COLOR +#define NRFX_UARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR +#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver +//========================================================== +#ifndef NRFX_UART_ENABLED +#define NRFX_UART_ENABLED 1 +#endif +// <o> NRFX_UART0_ENABLED - Enable UART0 instance +#ifndef NRFX_UART0_ENABLED +#define NRFX_UART0_ENABLED 0 +#endif + +// <o> NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC +#define NRFX_UART_DEFAULT_CONFIG_HWFC 0 +#endif + +// <o> NRFX_UART_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY +#define NRFX_UART_DEFAULT_CONFIG_PARITY 0 +#endif + +// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3866624=> 14400 baud +// <5152768=> 19200 baud +// <7729152=> 28800 baud +// <8388608=> 31250 baud +// <10309632=> 38400 baud +// <15007744=> 56000 baud +// <15462400=> 57600 baud +// <20615168=> 76800 baud +// <30924800=> 115200 baud +// <61845504=> 230400 baud +// <67108864=> 250000 baud +// <123695104=> 460800 baud +// <247386112=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE +#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800 +#endif + +// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_UART_CONFIG_LOG_ENABLED +#define NRFX_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_UART_CONFIG_LOG_LEVEL +#define NRFX_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UART_CONFIG_INFO_COLOR +#define NRFX_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UART_CONFIG_DEBUG_COLOR +#define NRFX_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// <e> POWER_ENABLED - nrf_drv_power - POWER peripheral driver - legacy layer +//========================================================== +#ifndef POWER_ENABLED +#define POWER_ENABLED 1 +#endif +// <o> POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef POWER_CONFIG_IRQ_PRIORITY +#define POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// <i> This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCEN +#define POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// <q> POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// <i> This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCENHV +#define POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// </e> + +// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer +//========================================================== +#ifndef UART_ENABLED +#define UART_ENABLED 1 +#endif +// <o> UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef UART_DEFAULT_CONFIG_HWFC +#define UART_DEFAULT_CONFIG_HWFC 0 +#endif + +// <o> UART_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef UART_DEFAULT_CONFIG_PARITY +#define UART_DEFAULT_CONFIG_PARITY 0 +#endif + +// <o> UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef UART_DEFAULT_CONFIG_BAUDRATE +#define UART_DEFAULT_CONFIG_BAUDRATE 30801920 +#endif + +// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY +#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// <q> UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA + + +#ifndef UART_EASY_DMA_SUPPORT +#define UART_EASY_DMA_SUPPORT 1 +#endif + +// <q> UART_LEGACY_SUPPORT - Driver supporting Legacy mode + + +#ifndef UART_LEGACY_SUPPORT +#define UART_LEGACY_SUPPORT 1 +#endif + +// <e> UART0_ENABLED - Enable UART0 instance +//========================================================== +#ifndef UART0_ENABLED +#define UART0_ENABLED 1 +#endif +// <q> UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA + + +#ifndef UART0_CONFIG_USE_EASY_DMA +#define UART0_CONFIG_USE_EASY_DMA 1 +#endif + +// </e> + +// <e> UART1_ENABLED - Enable UART1 instance +//========================================================== +#ifndef UART1_ENABLED +#define UART1_ENABLED 0 +#endif +// </e> + +// </e> + +// <e> USBD_ENABLED - nrf_drv_usbd - USB driver +//========================================================== +#ifndef USBD_ENABLED +#define USBD_ENABLED 1 +#endif +// <o> USBD_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef USBD_CONFIG_IRQ_PRIORITY +#define USBD_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> USBD_CONFIG_DMASCHEDULER_MODE - USBD SMA scheduler working scheme + +// <0=> Prioritized access +// <1=> Round Robin + +#ifndef USBD_CONFIG_DMASCHEDULER_MODE +#define USBD_CONFIG_DMASCHEDULER_MODE 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler +//========================================================== +#ifndef APP_SCHEDULER_ENABLED +#define APP_SCHEDULER_ENABLED 1 +#endif +// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature + + +#ifndef APP_SCHEDULER_WITH_PAUSE +#define APP_SCHEDULER_WITH_PAUSE 1 +#endif + +// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling + + +#ifndef APP_SCHEDULER_WITH_PROFILER +#define APP_SCHEDULER_WITH_PROFILER 1 +#endif + +// </e> + +// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality +//========================================================== +#ifndef APP_TIMER_ENABLED +#define APP_TIMER_ENABLED 1 +#endif +// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz + +#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY +#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 +#endif + +// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY +#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// <i> Size of the queue depends on how many timers are used +// <i> in the system, how often timers are started and overall +// <i> system latency. If queue size is too small app_timer calls +// <i> will fail. + +#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE +#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 +#endif + +// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler + + +#ifndef APP_TIMER_CONFIG_USE_SCHEDULER +#define APP_TIMER_CONFIG_USE_SCHEDULER 0 +#endif + +// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on + + +// <i> If option is enabled RTC is kept running even if there is no active timers. +// <i> This option can be used when app_timer is used for timestamping. + +#ifndef APP_TIMER_KEEPS_RTC_ACTIVE +#define APP_TIMER_KEEPS_RTC_ACTIVE 0 +#endif + +// <h> App Timer Legacy configuration - Legacy configuration. + +//========================================================== +// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// <q> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + + +#ifndef APP_TIMER_CONFIG_SWI_NUMBER +#define APP_TIMER_CONFIG_SWI_NUMBER 0 +#endif + +// </h> +//========================================================== + +// </e> + +// <q> APP_USBD_CDC_ACM_ENABLED - app_usbd_cdc_acm - USB CDC ACM class + + +#ifndef APP_USBD_CDC_ACM_ENABLED +#define APP_USBD_CDC_ACM_ENABLED 1 +#endif + +// <e> APP_USBD_ENABLED - app_usbd - USB Device library +//========================================================== +#ifndef APP_USBD_ENABLED +#define APP_USBD_ENABLED 1 +#endif +// <s> APP_USBD_VID - Vendor ID + +// <i> Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/ +#ifndef APP_USBD_VID +#define APP_USBD_VID 0x1915 +#endif + +// <s> APP_USBD_PID - Product ID + +// <i> Selected Product ID +#ifndef APP_USBD_PID +#define APP_USBD_PID 0x521B +#endif + +// <o> APP_USBD_DEVICE_VER_MAJOR - Device version, major part <0-99> + + +// <i> Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MAJOR +#define APP_USBD_DEVICE_VER_MAJOR 1 +#endif + +// <o> APP_USBD_DEVICE_VER_MINOR - Device version, minor part <0-99> + + +// <i> Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MINOR +#define APP_USBD_DEVICE_VER_MINOR 0 +#endif + +// <q> APP_USBD_CONFIG_SELF_POWERED - Self powered + + +#ifndef APP_USBD_CONFIG_SELF_POWERED +#define APP_USBD_CONFIG_SELF_POWERED 1 +#endif + +// <o> APP_USBD_CONFIG_MAX_POWER - MaxPower field in configuration descriptor in milliamps <0-500> + + +#ifndef APP_USBD_CONFIG_MAX_POWER +#define APP_USBD_CONFIG_MAX_POWER 500 +#endif + +// <q> APP_USBD_CONFIG_POWER_EVENTS_PROCESS - Process power events + + +// <i> Enable processing power events in USB event handler. + +#ifndef APP_USBD_CONFIG_POWER_EVENTS_PROCESS +#define APP_USBD_CONFIG_POWER_EVENTS_PROCESS 1 +#endif + +// <e> APP_USBD_CONFIG_EVENT_QUEUE_ENABLE - Enable event queue + +// <i> This is the default configuration when all the events are placed into internal queue. +// <i> Disable it when external queue is used like app_scheduler or if you wish to process all events inside interrupts. +// <i> Processing all events from the interrupt level adds requirement not to call any functions that modifies the USBD library state from the context higher than USB interrupt context. +// <i> Functions that modify USBD state are functions for sleep, wakeup, start, stop, enable and disable. +//========================================================== +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_ENABLE +#define APP_USBD_CONFIG_EVENT_QUEUE_ENABLE 1 +#endif +// <o> APP_USBD_CONFIG_EVENT_QUEUE_SIZE - The size of event queue <16-64> + + +// <i> The size of the queue for the events that would be processed in the main loop. + +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_SIZE +#define APP_USBD_CONFIG_EVENT_QUEUE_SIZE 32 +#endif + +// <o> APP_USBD_CONFIG_SOF_HANDLING_MODE - Change SOF events handling mode. + + +// <i> Normal queue - SOF events are pushed normally into event queue. +// <i> Compress queue - SOF events are counted and binded with other events or executed when queue is empty. +// <i> This prevents queue from filling with SOF events. +// <i> Interrupt - SOF events are processed in interrupt. +// <0=> Normal queue +// <1=> Compress queue +// <2=> Interrupt + +#ifndef APP_USBD_CONFIG_SOF_HANDLING_MODE +#define APP_USBD_CONFIG_SOF_HANDLING_MODE 1 +#endif + +// </e> + +// <q> APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE - Provide a function that generates timestamps for logs based on the current SOF + + +// <i> The function app_usbd_sof_timestamp_get will be implemented if the logger is enabled. +// <i> Use it when initializing the logger. +// <i> SOF processing will be always enabled when this configuration parameter is active. +// <i> Notice that this option is configured outside of APP_USBD_CONFIG_LOG_ENABLED. +// <i> This means that it will work even if the logging in this very module is disabled. + +#ifndef APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE +#define APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE 0 +#endif + +// <e> APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef APP_USBD_CONFIG_LOG_ENABLED +#define APP_USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CONFIG_LOG_LEVEL +#define APP_USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_INFO_COLOR +#define APP_USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_DEBUG_COLOR +#define APP_USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </e> + +// <q> APP_USBD_NRF_DFU_TRIGGER_ENABLED - app_usbd_nrf_dfu_trigger - USBD Nordic DFU Trigger class + + +#ifndef APP_USBD_NRF_DFU_TRIGGER_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_ENABLED 1 +#endif + +// <q> CRC16_ENABLED - crc16 - CRC16 calculation routines + + +#ifndef CRC16_ENABLED +#define CRC16_ENABLED 1 +#endif + +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <q> NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module +//========================================================== +#ifndef NRF_QUEUE_ENABLED +#define NRF_QUEUE_ENABLED 1 +#endif +// <q> NRF_QUEUE_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_QUEUE_CLI_CMDS +#define NRF_QUEUE_CLI_CMDS 0 +#endif + +// </e> + +// <q> NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator + + +#ifndef NRF_SECTION_ITER_ENABLED +#define NRF_SECTION_ITER_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <e> NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend +//========================================================== +#ifndef NRF_LOG_BACKEND_RTT_ENABLED +#define NRF_LOG_BACKEND_RTT_ENABLED 0 +#endif +// <o> NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// <i> Size of the buffer is a trade-off between RAM usage and processing. +// <i> if buffer is smaller then strings will often be fragmented. +// <i> It is recommended to use size which will fit typical log and only the +// <i> longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS +#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 +#endif + +// <o> NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. +// <i> If RTT fails to accept any new data after retries +// <i> module assumes that host is not active and on next +// <i> request it will perform only one write attempt. +// <i> On successful writing, module assumes that host is active +// <i> and scheme with retry is applied again. + +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT +#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 +#endif + +// </e> + +// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 0 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 1 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Segger_RTT + +//========================================================== +// <h> segger_rtt - SEGGER RTT + +//========================================================== +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// <i> or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// <i> The following modes are supported: +// <i> - SKIP - Do not block, output nothing. +// <i> - TRIM - Do not block, output as much as fits. +// <i> - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_SoftDevice + +//========================================================== +// <e> NRF_SDH_BLE_ENABLED - nrf_sdh_ble - SoftDevice BLE event handler +//========================================================== +#ifndef NRF_SDH_BLE_ENABLED +#define NRF_SDH_BLE_ENABLED 1 +#endif +// <h> BLE Stack configuration - Stack configuration parameters + +// <i> The SoftDevice handler will configure the stack with these parameters when calling @ref nrf_sdh_ble_default_cfg_set. +// <i> Other libraries might depend on these values; keep them up-to-date even if you are not explicitely calling @ref nrf_sdh_ble_default_cfg_set. +//========================================================== +// <o> NRF_SDH_BLE_GAP_DATA_LENGTH <27-251> + + +// <i> Requested BLE GAP data length to be negotiated. + +#ifndef NRF_SDH_BLE_GAP_DATA_LENGTH +#define NRF_SDH_BLE_GAP_DATA_LENGTH 27 +#endif + +// <o> NRF_SDH_BLE_PERIPHERAL_LINK_COUNT - Maximum number of peripheral links. +#ifndef NRF_SDH_BLE_PERIPHERAL_LINK_COUNT +#define NRF_SDH_BLE_PERIPHERAL_LINK_COUNT 0 +#endif + +// <o> NRF_SDH_BLE_CENTRAL_LINK_COUNT - Maximum number of central links. +#ifndef NRF_SDH_BLE_CENTRAL_LINK_COUNT +#define NRF_SDH_BLE_CENTRAL_LINK_COUNT 0 +#endif + +// <o> NRF_SDH_BLE_TOTAL_LINK_COUNT - Total link count. +// <i> Maximum number of total concurrent connections using the default configuration. + +#ifndef NRF_SDH_BLE_TOTAL_LINK_COUNT +#define NRF_SDH_BLE_TOTAL_LINK_COUNT 1 +#endif + +// <o> NRF_SDH_BLE_GAP_EVENT_LENGTH - GAP event length. +// <i> The time set aside for this connection on every connection interval in 1.25 ms units. + +#ifndef NRF_SDH_BLE_GAP_EVENT_LENGTH +#define NRF_SDH_BLE_GAP_EVENT_LENGTH 6 +#endif + +// <o> NRF_SDH_BLE_GATT_MAX_MTU_SIZE - Static maximum MTU size. +#ifndef NRF_SDH_BLE_GATT_MAX_MTU_SIZE +#define NRF_SDH_BLE_GATT_MAX_MTU_SIZE 250 +#endif + +// <o> NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE - Attribute Table size in bytes. The size must be a multiple of 4. +#ifndef NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE +#define NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE 1408 +#endif + +// <o> NRF_SDH_BLE_VS_UUID_COUNT - The number of vendor-specific UUIDs. +#ifndef NRF_SDH_BLE_VS_UUID_COUNT +#define NRF_SDH_BLE_VS_UUID_COUNT 0 +#endif + +// <q> NRF_SDH_BLE_SERVICE_CHANGED - Include the Service Changed characteristic in the Attribute Table. + + +#ifndef NRF_SDH_BLE_SERVICE_CHANGED +#define NRF_SDH_BLE_SERVICE_CHANGED 0 +#endif + +// </h> +//========================================================== + +// <h> BLE Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_BLE_OBSERVER_PRIO_LEVELS - Total number of priority levels for BLE observers. +// <i> This setting configures the number of priority levels available for BLE event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_BLE_OBSERVER_PRIO_LEVELS +#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 4 +#endif + +// <h> BLE Observers priorities - Invididual priorities + +//========================================================== +// <o> BLE_ADV_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Advertising module. + +#ifndef BLE_ADV_BLE_OBSERVER_PRIO +#define BLE_ADV_BLE_OBSERVER_PRIO 1 +#endif + +// <o> BLE_ANCS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Apple Notification Service Client. + +#ifndef BLE_ANCS_C_BLE_OBSERVER_PRIO +#define BLE_ANCS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_ANS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Alert Notification Service Client. + +#ifndef BLE_ANS_C_BLE_OBSERVER_PRIO +#define BLE_ANS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_BAS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Battery Service. + +#ifndef BLE_BAS_BLE_OBSERVER_PRIO +#define BLE_BAS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_BAS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Battery Service Client. + +#ifndef BLE_BAS_C_BLE_OBSERVER_PRIO +#define BLE_BAS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_BPS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Blood Pressure Service. + +#ifndef BLE_BPS_BLE_OBSERVER_PRIO +#define BLE_BPS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_CONN_PARAMS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Connection parameters module. + +#ifndef BLE_CONN_PARAMS_BLE_OBSERVER_PRIO +#define BLE_CONN_PARAMS_BLE_OBSERVER_PRIO 1 +#endif + +// <o> BLE_CONN_STATE_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Connection State module. + +#ifndef BLE_CONN_STATE_BLE_OBSERVER_PRIO +#define BLE_CONN_STATE_BLE_OBSERVER_PRIO 0 +#endif + +// <o> BLE_CSCS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Cycling Speed and Cadence Service. + +#ifndef BLE_CSCS_BLE_OBSERVER_PRIO +#define BLE_CSCS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_CTS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Current Time Service Client. + +#ifndef BLE_CTS_C_BLE_OBSERVER_PRIO +#define BLE_CTS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_DB_DISC_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Database Discovery module. + +#ifndef BLE_DB_DISC_BLE_OBSERVER_PRIO +#define BLE_DB_DISC_BLE_OBSERVER_PRIO 1 +#endif + +// <o> BLE_DFU_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the DFU Service. + +#ifndef BLE_DFU_BLE_OBSERVER_PRIO +#define BLE_DFU_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_DIS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Device Information Client. + +#ifndef BLE_DIS_C_BLE_OBSERVER_PRIO +#define BLE_DIS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_GLS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Glucose Service. + +#ifndef BLE_GLS_BLE_OBSERVER_PRIO +#define BLE_GLS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HIDS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Human Interface Device Service. + +#ifndef BLE_HIDS_BLE_OBSERVER_PRIO +#define BLE_HIDS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HRS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Heart Rate Service. + +#ifndef BLE_HRS_BLE_OBSERVER_PRIO +#define BLE_HRS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HRS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Heart Rate Service Client. + +#ifndef BLE_HRS_C_BLE_OBSERVER_PRIO +#define BLE_HRS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HTS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Health Thermometer Service. + +#ifndef BLE_HTS_BLE_OBSERVER_PRIO +#define BLE_HTS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_IAS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Immediate Alert Service. + +#ifndef BLE_IAS_BLE_OBSERVER_PRIO +#define BLE_IAS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_IAS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Immediate Alert Service Client. + +#ifndef BLE_IAS_C_BLE_OBSERVER_PRIO +#define BLE_IAS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LBS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the LED Button Service. + +#ifndef BLE_LBS_BLE_OBSERVER_PRIO +#define BLE_LBS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LBS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the LED Button Service Client. + +#ifndef BLE_LBS_C_BLE_OBSERVER_PRIO +#define BLE_LBS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LESC_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the BLE LESC module. + +#ifndef BLE_LESC_OBSERVER_PRIO +#define BLE_LESC_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LLS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Link Loss Service. + +#ifndef BLE_LLS_BLE_OBSERVER_PRIO +#define BLE_LLS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LNS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Location Navigation Service. + +#ifndef BLE_LNS_BLE_OBSERVER_PRIO +#define BLE_LNS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_NUS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the UART Service. + +#ifndef BLE_NUS_BLE_OBSERVER_PRIO +#define BLE_NUS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_NUS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the UART Central Service. + +#ifndef BLE_NUS_C_BLE_OBSERVER_PRIO +#define BLE_NUS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_OTS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Object transfer service. + +#ifndef BLE_OTS_BLE_OBSERVER_PRIO +#define BLE_OTS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_OTS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Object transfer service client. + +#ifndef BLE_OTS_C_BLE_OBSERVER_PRIO +#define BLE_OTS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_RSCS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Running Speed and Cadence Service. + +#ifndef BLE_RSCS_BLE_OBSERVER_PRIO +#define BLE_RSCS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_RSCS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Running Speed and Cadence Client. + +#ifndef BLE_RSCS_C_BLE_OBSERVER_PRIO +#define BLE_RSCS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_TPS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the TX Power Service. + +#ifndef BLE_TPS_BLE_OBSERVER_PRIO +#define BLE_TPS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BSP_BTN_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Button Control module. + +#ifndef BSP_BTN_BLE_OBSERVER_PRIO +#define BSP_BTN_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NRF_BLE_BMS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Bond Management Service. + +#ifndef NRF_BLE_BMS_BLE_OBSERVER_PRIO +#define NRF_BLE_BMS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_CGMS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Contiuon Glucose Monitoring Service. + +#ifndef NRF_BLE_CGMS_BLE_OBSERVER_PRIO +#define NRF_BLE_CGMS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_ES_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Eddystone module. + +#ifndef NRF_BLE_ES_BLE_OBSERVER_PRIO +#define NRF_BLE_ES_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the GATT Service Client. + +#ifndef NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO +#define NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_GATT_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the GATT module. + +#ifndef NRF_BLE_GATT_BLE_OBSERVER_PRIO +#define NRF_BLE_GATT_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NRF_BLE_QWR_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Queued writes module. + +#ifndef NRF_BLE_QWR_BLE_OBSERVER_PRIO +#define NRF_BLE_QWR_BLE_OBSERVER_PRIO 2 +#endif + +// <o> PM_BLE_OBSERVER_PRIO - Priority with which BLE events are dispatched to the Peer Manager module. +#ifndef PM_BLE_OBSERVER_PRIO +#define PM_BLE_OBSERVER_PRIO 1 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler +//========================================================== +#ifndef NRF_SDH_ENABLED +#define NRF_SDH_ENABLED 1 +#endif +// <h> Dispatch model + +// <i> This setting configures how Stack events are dispatched to the application. +//========================================================== +// <o> NRF_SDH_DISPATCH_MODEL + + +// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context. +// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler. +// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually. +// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT +// <1=> NRF_SDH_DISPATCH_MODEL_APPSH +// <2=> NRF_SDH_DISPATCH_MODEL_POLLING + +#ifndef NRF_SDH_DISPATCH_MODEL +#define NRF_SDH_DISPATCH_MODEL 0 +#endif + +// </h> +//========================================================== + +// <h> Clock - SoftDevice clock configuration + +//========================================================== +// <o> NRF_SDH_CLOCK_LF_SRC - SoftDevice clock source. + +// <0=> NRF_CLOCK_LF_SRC_RC +// <1=> NRF_CLOCK_LF_SRC_XTAL +// <2=> NRF_CLOCK_LF_SRC_SYNTH + +#ifndef NRF_SDH_CLOCK_LF_SRC +#define NRF_SDH_CLOCK_LF_SRC 1 +#endif + +// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. +#ifndef NRF_SDH_CLOCK_LF_RC_CTIV +#define NRF_SDH_CLOCK_LF_RC_CTIV 0 +#endif + +// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. +// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated +// <i> if the temperature has not changed. + +#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV +#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0 +#endif + +// <o> NRF_SDH_CLOCK_LF_ACCURACY - External clock accuracy used in the LL to compute timing. + +// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM +// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM +// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM +// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM +// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM +// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM +// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM +// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM +// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM +// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM +// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM +// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM + +#ifndef NRF_SDH_CLOCK_LF_ACCURACY +#define NRF_SDH_CLOCK_LF_ACCURACY 7 +#endif + +// </h> +//========================================================== + +// <h> SDH Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. +// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS +#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2 +#endif + +// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. +// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS +#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2 +#endif + +// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. +// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC). +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS +#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2 +#endif + + +// <h> State Observers priorities - Invididual priorities + +//========================================================== +// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to the Clock driver. + +#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO +#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// <o> POWER_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to the Power driver. + +#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO +#define POWER_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// <o> RNG_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to this module. + +#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO +#define RNG_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// <h> Stack Event Observers priorities - Invididual priorities + +//========================================================== +// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO +#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0 +#endif + +// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO +#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0 +#endif + +// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO +#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler +//========================================================== +#ifndef NRF_SDH_SOC_ENABLED +#define NRF_SDH_SOC_ENABLED 1 +#endif +// <h> SoC Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. +// <i> This setting configures the number of priority levels available for the SoC event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS +#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2 +#endif + +// <h> SoC Observers priorities - Invididual priorities + +//========================================================== +// <o> BLE_ADV_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Advertising module. + +#ifndef BLE_ADV_SOC_OBSERVER_PRIO +#define BLE_ADV_SOC_OBSERVER_PRIO 1 +#endif + +// <o> BLE_DFU_SOC_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the DFU Service. + +#ifndef BLE_DFU_SOC_OBSERVER_PRIO +#define BLE_DFU_SOC_OBSERVER_PRIO 1 +#endif + +// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Clock driver. + +#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO +#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0 +#endif + +// <o> POWER_CONFIG_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Power driver. + +#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO +#define POWER_CONFIG_SOC_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + |