diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/secure_bootloader/pca10040_ble/config/sdk_config.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/secure_bootloader/pca10040_ble/config/sdk_config.h | 4778 |
1 files changed, 4778 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/secure_bootloader/pca10040_ble/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/secure_bootloader/pca10040_ble/config/sdk_config.h new file mode 100644 index 0000000..23088cf --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/secure_bootloader/pca10040_ble/config/sdk_config.h @@ -0,0 +1,4778 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// <h> nRF_Bootloader + +//========================================================== +// <h> nrf_bootloader - Bootloader settings + +//========================================================== +// <h> Application integrity checks + +//========================================================== +// <q> NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 - Skip integrity check of the application when bit 1 (0-indexed) is set in the GPREGRET2 register. + + +#ifndef NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 +#define NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 1 +#endif + +// <q> NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET - Skip integrity check of the application when waking up from the System Off state. + + +#ifndef NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET +#define NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET 1 +#endif + +// </h> +//========================================================== + +// <h> DFU mode enter method + +//========================================================== +// <e> NRF_BL_DFU_ENTER_METHOD_BUTTON - Enter DFU mode on button press. +//========================================================== +#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTON +#define NRF_BL_DFU_ENTER_METHOD_BUTTON 1 +#endif +// <o> NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN - Button for entering DFU mode. + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) + +#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN +#define NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN 16 +#endif + +// </e> + +// <q> NRF_BL_DFU_ENTER_METHOD_PINRESET - Enter DFU mode on pin reset. + + +#ifndef NRF_BL_DFU_ENTER_METHOD_PINRESET +#define NRF_BL_DFU_ENTER_METHOD_PINRESET 0 +#endif + +// <q> NRF_BL_DFU_ENTER_METHOD_GPREGRET - Enter DFU mode when bit 1 (0-indexed) is set in the NRF_POWER_GPREGRET register. + + +#ifndef NRF_BL_DFU_ENTER_METHOD_GPREGRET +#define NRF_BL_DFU_ENTER_METHOD_GPREGRET 1 +#endif + +// <q> NRF_BL_DFU_ENTER_METHOD_BUTTONLESS - Enter DFU mode when the Boolean enter_buttonless_dfu in DFU settings is true. + + +#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTONLESS +#define NRF_BL_DFU_ENTER_METHOD_BUTTONLESS 0 +#endif + +// </h> +//========================================================== + +// <h> DFU timers + +//========================================================== +// <o> NRF_BL_DFU_CONTINUATION_TIMEOUT_MS - Timeout in ms when expecting an update immediately. <100-60000000> + + +// <i> This timeout is used after updating the SoftDevice, when there is +// <i> already a valid application present. The bootloader will enter DFU mode +// <i> for a short time instead of booting the old application to allow the host +// <i> to immediately transfer a new application if it wishes. + +#ifndef NRF_BL_DFU_CONTINUATION_TIMEOUT_MS +#define NRF_BL_DFU_CONTINUATION_TIMEOUT_MS 10000 +#endif + +// <o> NRF_BL_DFU_INACTIVITY_TIMEOUT_MS - Timeout in ms before automatically starting a valid application due to inactivity. <0-60000000> + + +// <i> If 0, no inactivity timer will be used. Values 1-99 are invalid. + +#ifndef NRF_BL_DFU_INACTIVITY_TIMEOUT_MS +#define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 120000 +#endif + +// </h> +//========================================================== + +// <h> Watchdog timer + +//========================================================== +// <o> NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS - Maximum latency of the scheduler in miliseconds +// <i> Maximum latency of the scheduler is compared with +// <i> watchdog counter reload value (CRV). If latency is big +// <i> enough, the watchdog will be fed from internal app_timer +// <i> handler along with feed from user function. If latency +// <i> is smaller than CRV, the watchdog will not be internally fed once +// <i> it will be externally fed. Maximum latency is mainly affected +// <i> by flash operations. + +#ifndef NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS +#define NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS 10000 +#endif + +// </h> +//========================================================== + +// <h> Misc Bootloader settings + +//========================================================== +// <o> NRF_BL_FW_COPY_PROGRESS_STORE_STEP - Number of pages copied after which progress in the settings page is updated. +// <i> Progress stored in the settings page allows the bootloader to resume +// <i> copying the new firmware in case of interruption (reset). +// <i> If the value is small, then the resume point is more accurate. However, +// <i> it also impacts negatively on flash wear. + +#ifndef NRF_BL_FW_COPY_PROGRESS_STORE_STEP +#define NRF_BL_FW_COPY_PROGRESS_STORE_STEP 8 +#endif + +// <q> NRF_BL_SETTINGS_PAGE_PROTECT - Write-protect the settings page before starting the application. + + +// <i> The settings page may be used to exchange information between the bootloader and the application. +// <i> In that case it should not be protected. + +#ifndef NRF_BL_SETTINGS_PAGE_PROTECT +#define NRF_BL_SETTINGS_PAGE_PROTECT 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Crypto + +//========================================================== +// <e> NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library +//========================================================== +#ifndef NRF_CRYPTO_ENABLED +#define NRF_CRYPTO_ENABLED 1 +#endif +// <o> NRF_CRYPTO_ALLOCATOR - Memory allocator + + +// <i> Choose memory allocator used by nrf_crypto. Default is alloca if possible or nrf_malloc otherwise. If 'User macros' are selected then user have to create 'nrf_crypto_allocator.h' file containing NRF_CRYPTO_ALLOC, NRF_CRYPTO_FREE and NRF_CRYPTO_ALLOC_ON_STACK +// <0=> Default +// <1=> User macros +// <2=> On stack (alloca) +// <3=> C dynamic memory (malloc) +// <4=> SDK Memory Manager (nrf_malloc) + +#ifndef NRF_CRYPTO_ALLOCATOR +#define NRF_CRYPTO_ALLOCATOR 0 +#endif + +// <e> NRF_CRYPTO_BACKEND_CC310_BL_ENABLED - Enable the ARM Cryptocell CC310 reduced backend. + +// <i> The CC310 hardware-accelerated cryptography backend with reduced functionality and footprint (only available on nRF52840). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ENABLED 0 +#endif +// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310_BL. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED 0 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310_BL. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED - CC310_BL SHA-256 hash functionality. + + +// <i> CC310_BL backend implementation for hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED - nrf_cc310_bl hash outputs digests in little endian + + +// <i> Makes the nRF SH hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED 0 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED - nrf_cc310_bl buffers to RAM before running hash operation + + +// <i> Enabling this makes hashing of addresses in FLASH range possible. Size of buffer allocated for hashing is set by NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED 0 +#endif + +// <o> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - nrf_cc310_bl hash outputs digests in little endian +// <i> Makes the nrf_cc310_bl hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE 4096 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED - Enable non-standard little endian byte order in nrf_cc310_bl ECC functions. + + +// <i> This affects parameters for all nrf_cc310_bl ECC APIs (raw keys, signature, digest). Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED 0 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_CC310_ENABLED - Enable the ARM Cryptocell CC310 backend. + +// <i> The CC310 hardware-accelerated cryptography backend (only available on nRF52840). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CC310_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ENABLED 0 +#endif +// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED - Enable the AES CBC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED - Enable the AES CTR mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED - Enable the AES ECB mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED - Enable the AES CBC_MAC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED - Enable the AES CMAC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED - Enable the AES CCM mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED - Enable the AES CCM* mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED - Enable the secp160r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED - Enable the secp160r2 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED - Enable the secp192r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED - Enable the secp384r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED - Enable the secp521r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED - Enable the secp160k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED - Enable the secp192k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED - Enable the secp224k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED - Enable the secp256k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED - CC310 SHA-256 hash functionality. + + +// <i> CC310 backend implementation for hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED - CC310 SHA-512 hash functionality + + +// <i> CC310 backend implementation for SHA-512 (in software). + +#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED - CC310 HMAC using SHA-256 + + +// <i> CC310 backend implementation for HMAC using hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED - CC310 HMAC using SHA-512 + + +// <i> CC310 backend implementation for HMAC using SHA-512 (in software). + +#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED - Enable RNG support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED 1 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_CIFRA_ENABLED - Enable the Cifra backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CIFRA_ENABLED +#define NRF_CRYPTO_BACKEND_CIFRA_ENABLED 0 +#endif +// <q> NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED - Enable the AES EAX mode using Cifra. + + +#ifndef NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED +#define NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED 1 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED - Enable the mbed TLS backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED 0 +#endif +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED - Enable the AES CBC mode mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED - Enable the AES CTR mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED - Enable the AES CFB mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED - Enable the AES ECB mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED - Enable the AES CBC MAC mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED - Enable the AES CMAC mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED - Enable the AES CCM mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED - Enable the AES GCM mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve + + +// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve + + +// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve + + +// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED - Enable secp384r1 (NIST 384-bit) curve + + +// <i> Enable this setting if you need secp384r1 (NIST 384-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED - Enable secp521r1 (NIST 521-bit) curve + + +// <i> Enable this setting if you need secp521r1 (NIST 521-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED - Enable secp192k1 (Koblitz 192-bit) curve + + +// <i> Enable this setting if you need secp192k1 (Koblitz 192-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED - Enable secp224k1 (Koblitz 224-bit) curve + + +// <i> Enable this setting if you need secp224k1 (Koblitz 224-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve + + +// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED - Enable bp256r1 (Brainpool 256-bit) curve + + +// <i> Enable this setting if you need bp256r1 (Brainpool 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED - Enable bp384r1 (Brainpool 384-bit) curve + + +// <i> Enable this setting if you need bp384r1 (Brainpool 384-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED - Enable bp512r1 (Brainpool 512-bit) curve + + +// <i> Enable this setting if you need bp512r1 (Brainpool 512-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED - Enable Curve25519 curve + + +// <i> Enable this setting if you need Curve25519 support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED - Enable mbed TLS SHA-256 hash functionality. + + +// <i> mbed TLS backend implementation for SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED - Enable mbed TLS SHA-512 hash functionality. + + +// <i> mbed TLS backend implementation for SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED - Enable mbed TLS HMAC using SHA-256. + + +// <i> mbed TLS backend implementation for HMAC using SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED - Enable mbed TLS HMAC using SHA-512. + + +// <i> mbed TLS backend implementation for HMAC using SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED 1 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED - Enable the micro-ecc backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED 1 +#endif +// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve + + +// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED 0 +#endif + +// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve + + +// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED 0 +#endif + +// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve + + +// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve + + +// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED 0 +#endif + +// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED - Always trust raw public key (it will cause a security issue if the public key comes from an untrusted source) + + +// <i> Enable this setting if you want to reduce flash usage. Only for use in nRF SDK DFU! Never enable it if the raw public key comes from an untrusted source. + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED - Enable non-standard little endian byte order. + + +// <i> This affects parameters for all ECC API (raw keys, signature, digest, shared secret). Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED 1 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED - Enable the nRF HW RNG backend. + +// <i> The nRF HW backend provide access to RNG peripheral in nRF5x devices. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED 0 +#endif +// <q> NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED - Enable mbed TLS CTR-DRBG algorithm. + + +// <i> Enable mbed TLS CTR-DRBG standardized by NIST (NIST SP 800-90A Rev. 1). The nRF HW RNG is used as an entropy source for seeding. + +#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED 1 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_NRF_SW_ENABLED - Enable the legacy nRFx sw for crypto. + +// <i> The nRF SW cryptography backend (only used in bootloader context). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_ENABLED 1 +#endif +// <q> NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED - nRF SW hash backend support for SHA-256 + + +// <i> The nRF SW backend provide access to nRF SDK legacy hash implementation of SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED - nRF SW hash outputs digests in little endian + + +// <i> Makes the nRF SH hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED 1 +#endif + +// </e> + +// <e> NRF_CRYPTO_BACKEND_OBERON_ENABLED - Enable the Oberon backend + +// <i> The Oberon backend +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_OBERON_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ENABLED 0 +#endif +// <q> NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using Oberon. + + +#ifndef NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED - Enable secp256r1 curve + + +// <i> Enable this setting if you need secp256r1 curve support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED - Enable Curve25519 ECDH + + +// <i> Enable this setting if you need Curve25519 ECDH support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED - Enable Ed25519 signature scheme + + +// <i> Enable this setting if you need Ed25519 support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED - Oberon SHA-256 hash functionality + + +// <i> Oberon backend implementation for SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED - Oberon SHA-512 hash functionality + + +// <i> Oberon backend implementation for SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED - Oberon HMAC using SHA-256 + + +// <i> Oberon backend implementation for HMAC using SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED - Oberon HMAC using SHA-512 + + +// <i> Oberon backend implementation for HMAC using SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED 1 +#endif + +// </e> + +// </e> + +// <h> nrf_crypto_rng - RNG Configuration + +//========================================================== +// <q> NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED - Use static memory buffers for context and temporary init buffer. + + +// <i> Always recommended when using the nRF HW RNG as the context and temporary buffers are small. Consider disabling if using the CC310 RNG in a RAM constrained application. In this case, memory must be provided to nrf_crypto_rng_init, or it can be allocated internally provided that NRF_CRYPTO_ALLOCATOR does not allocate memory on the stack. + +#ifndef NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED +#define NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED 1 +#endif + +// <q> NRF_CRYPTO_RNG_AUTO_INIT_ENABLED - Initialize the RNG module automatically when nrf_crypto is initialized. + + +// <i> Automatic initialization is only supported with static or internally allocated context and temporary memory. + +#ifndef NRF_CRYPTO_RNG_AUTO_INIT_ENABLED +#define NRF_CRYPTO_RNG_AUTO_INIT_ENABLED 1 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_DFU + +//========================================================== +// <h> nrf_dfu - Device Firmware Upgrade + +//========================================================== +// <h> DFU transport + +//========================================================== +// <e> NRF_DFU_TRANSPORT_BLE - BLE transport settings +//========================================================== +#ifndef NRF_DFU_TRANSPORT_BLE +#define NRF_DFU_TRANSPORT_BLE 1 +#endif +// <s> NRF_DFU_BLE_ADV_NAME - Default advertising name. +#ifndef NRF_DFU_BLE_ADV_NAME +#define NRF_DFU_BLE_ADV_NAME "DfuTarg" +#endif + +// <h> BLE DFU security + +//========================================================== +// <q> NRF_DFU_BLE_REQUIRES_BONDS - Require bond with peer. + + +#ifndef NRF_DFU_BLE_REQUIRES_BONDS +#define NRF_DFU_BLE_REQUIRES_BONDS 0 +#endif + +// </h> +//========================================================== + +// <h> BLE DFU connection + +//========================================================== +// <o> NRF_DFU_BLE_MIN_CONN_INTERVAL - Minimum connection interval (units). +// <i> Minimum GAP connection interval, in 1.25 ms units. + +#ifndef NRF_DFU_BLE_MIN_CONN_INTERVAL +#define NRF_DFU_BLE_MIN_CONN_INTERVAL 12 +#endif + +// <o> NRF_DFU_BLE_MAX_CONN_INTERVAL - Maximum connection interval (units). +// <i> Maximum GAP connection interval, in 1.25 ms units. + +#ifndef NRF_DFU_BLE_MAX_CONN_INTERVAL +#define NRF_DFU_BLE_MAX_CONN_INTERVAL 12 +#endif + +// <o> NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS - Supervision timeout (ms). +// <i> GAP connection supervision timeout, in milliseconds. + +#ifndef NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS +#define NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS 6000 +#endif + +// </h> +//========================================================== + +// <h> BLE DFU buffers + +//========================================================== +// <e> NRF_DFU_BLE_BUFFERS_OVERRIDE + +// <i> Check this option to override the default number of buffers. +//========================================================== +#ifndef NRF_DFU_BLE_BUFFERS_OVERRIDE +#define NRF_DFU_BLE_BUFFERS_OVERRIDE 0 +#endif +// <o> NRF_DFU_BLE_BUFFERS - Number of buffers in the BLE transport. +// <i> Number of buffers to store incoming data while it is being written to flash. +// <i> Reduce this value to save RAM. If this value is too low, the DFU process will fail. + +#ifndef NRF_DFU_BLE_BUFFERS +#define NRF_DFU_BLE_BUFFERS 8 +#endif + +// </e> + +// </h> +//========================================================== + +// </e> + +// </h> +//========================================================== + +// <h> DFU protocol + +//========================================================== +// <q> NRF_DFU_PROTOCOL_FW_VERSION_MSG - Firmware version message support. + + +// <i> Firmware version message support. +// <i> If disabled, firmware version requests will return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED. + +#ifndef NRF_DFU_PROTOCOL_FW_VERSION_MSG +#define NRF_DFU_PROTOCOL_FW_VERSION_MSG 1 +#endif + +// <q> NRF_DFU_PROTOCOL_VERSION_MSG - Protocol version message support. + + +// <i> Protocol version message support. +// <i> If disabled, protocol version requests will return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED. + +#ifndef NRF_DFU_PROTOCOL_VERSION_MSG +#define NRF_DFU_PROTOCOL_VERSION_MSG 1 +#endif + +// </h> +//========================================================== + +// <h> DFU security + +//========================================================== +// <q> NRF_DFU_APP_DOWNGRADE_PREVENTION - Check the firmware version and SoftDevice requirements of application (and SoftDevice) updates. + + +// <i> Whether to check the incoming version against the version of the existing app and/or +// <i> the incoming SoftDevice requirements against the existing SoftDevice. +// <i> This applies to application updates, and possibly to SoftDevice updates. +// <i> Disabling this causes the checks to always ignore the incoming firmware version and +// <i> to ignore the SoftDevice requirements if the first requirement is 0. +// <i> This does not apply the bootloader updates. If the bootloader depends on the SoftDevice +// <i> e.g. for BLE transport, this does not apply to SoftDevice updates. +// <i> See @ref lib_bootloader_dfu_validation for more information. +// <i> When signed updates are required, version checking should always be enabled. + +#ifndef NRF_DFU_APP_DOWNGRADE_PREVENTION +#define NRF_DFU_APP_DOWNGRADE_PREVENTION 1 +#endif + +// <q> NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES - Accept only dual-bank application updates. + + +// <i> If not enabled then if there is not enough space to perform dual-bank update +// <i> application is deleted and single-bank update is performed. In case it is considered +// <i> security concern user can prefer to discard update request rather than overwrite +// <i> current application. + +#ifndef NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES +#define NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES 0 +#endif + +// <o> NRF_DFU_HW_VERSION - Device hardware version. +// <i> This is used to determine if given update is targeting the device. +// <i> It is checked against the hw_version value in the init packet + +#ifndef NRF_DFU_HW_VERSION +#define NRF_DFU_HW_VERSION 52 +#endif + +// <q> NRF_DFU_REQUIRE_SIGNED_APP_UPDATE - Require a valid signature to update the application or SoftDevice. + + +#ifndef NRF_DFU_REQUIRE_SIGNED_APP_UPDATE +#define NRF_DFU_REQUIRE_SIGNED_APP_UPDATE 1 +#endif + +// <q> NRF_DFU_SINGLE_BANK_APP_UPDATES - Place the application and the SoftDevice directly where they are supposed to be. + + +// <i> Note that this creates security concerns when signing and version checks +// <i> are enabled. An attacker will be able to delete (but not replace) +// <i> the current app or SoftDevice without knowing the signature key. + +#ifndef NRF_DFU_SINGLE_BANK_APP_UPDATES +#define NRF_DFU_SINGLE_BANK_APP_UPDATES 0 +#endif + +// </h> +//========================================================== + +// <h> Misc DFU settings + +//========================================================== +// <q> NRF_DFU_SAVE_PROGRESS_IN_FLASH - Save DFU progress in flash. + + +// <i> Save DFU progress to flash so that it can be resumed if interrupted, instead of being restarted. +// <i> Keep this setting disabled to maximize transfer speed and minimize flash wear. +// <i> The init packet is always saved in flash, regardless of this setting. + +#ifndef NRF_DFU_SAVE_PROGRESS_IN_FLASH +#define NRF_DFU_SAVE_PROGRESS_IN_FLASH 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_Libraries + +//========================================================== +// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler +//========================================================== +#ifndef APP_SCHEDULER_ENABLED +#define APP_SCHEDULER_ENABLED 1 +#endif +// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature + + +#ifndef APP_SCHEDULER_WITH_PAUSE +#define APP_SCHEDULER_WITH_PAUSE 0 +#endif + +// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling + + +#ifndef APP_SCHEDULER_WITH_PROFILER +#define APP_SCHEDULER_WITH_PROFILER 0 +#endif + +// </e> + +// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality +//========================================================== +#ifndef APP_TIMER_ENABLED +#define APP_TIMER_ENABLED 1 +#endif +// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz + +#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY +#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 +#endif + +// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY +#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 +#endif + +// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// <i> Size of the queue depends on how many timers are used +// <i> in the system, how often timers are started and overall +// <i> system latency. If queue size is too small app_timer calls +// <i> will fail. + +#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE +#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 +#endif + +// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler + + +#ifndef APP_TIMER_CONFIG_USE_SCHEDULER +#define APP_TIMER_CONFIG_USE_SCHEDULER 0 +#endif + +// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on + + +// <i> If option is enabled RTC is kept running even if there is no active timers. +// <i> This option can be used when app_timer is used for timestamping. + +#ifndef APP_TIMER_KEEPS_RTC_ACTIVE +#define APP_TIMER_KEEPS_RTC_ACTIVE 0 +#endif + +// <h> App Timer Legacy configuration - Legacy configuration. + +//========================================================== +// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// <q> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + + +#ifndef APP_TIMER_CONFIG_SWI_NUMBER +#define APP_TIMER_CONFIG_SWI_NUMBER 0 +#endif + +// </h> +//========================================================== + +// </e> + +// <q> CRC32_ENABLED - crc32 - CRC32 calculation routines + + +#ifndef CRC32_ENABLED +#define CRC32_ENABLED 1 +#endif + +// <e> MEM_MANAGER_ENABLED - mem_manager - Dynamic memory allocator +//========================================================== +#ifndef MEM_MANAGER_ENABLED +#define MEM_MANAGER_ENABLED 1 +#endif +// <o> MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255> + + +#ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT +#define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1 +#endif + +// <o> MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block. +// <i> Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE +#define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32 +#endif + +// <o> MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255> + + +#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT +#define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block. +// <i> Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE +#define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256 +#endif + +// <o> MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255> + + +#ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT +#define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block. +// <i> Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE +#define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256 +#endif + +// <o> MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255> + + +#ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT +#define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block. +// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE +#define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320 +#endif + +// <o> MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255> + + +#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT +#define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block. +// <i> Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE +#define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444 +#endif + +// <o> MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255> + + +#ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT +#define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block. +// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE +#define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64 +#endif + +// <o> MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255> + + +#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT +#define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0 +#endif + +// <o> MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block. +// <i> Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE +#define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32 +#endif + +// <e> MEM_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef MEM_MANAGER_CONFIG_LOG_ENABLED +#define MEM_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> MEM_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef MEM_MANAGER_CONFIG_LOG_LEVEL +#define MEM_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> MEM_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef MEM_MANAGER_CONFIG_INFO_COLOR +#define MEM_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> MEM_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef MEM_MANAGER_CONFIG_DEBUG_COLOR +#define MEM_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <q> MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module. + + +#ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK +#define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0 +#endif + +// </e> + +// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// </e> + +// </e> + +// <e> NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library +//========================================================== +#ifndef NRF_FSTORAGE_ENABLED +#define NRF_FSTORAGE_ENABLED 1 +#endif +// <h> nrf_fstorage - Common settings + +// <i> Common settings to all fstorage implementations +//========================================================== +// <q> NRF_FSTORAGE_PARAM_CHECK_DISABLED - Disable user input validation + + +// <i> If selected, use ASSERT to validate user input. +// <i> This effectively removes user input validation in production code. +// <i> Recommended setting: OFF, only enable this setting if size is a major concern. + +#ifndef NRF_FSTORAGE_PARAM_CHECK_DISABLED +#define NRF_FSTORAGE_PARAM_CHECK_DISABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nrf_fstorage_sd - Implementation using the SoftDevice + +// <i> Configuration options for the fstorage implementation using the SoftDevice +//========================================================== +// <o> NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations +// <i> Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM. + +#ifndef NRF_FSTORAGE_SD_QUEUE_SIZE +#define NRF_FSTORAGE_SD_QUEUE_SIZE 16 +#endif + +// <o> NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy +// <i> Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error. +// <i> The SoftDevice might fail to schedule flash access due to high BLE activity. + +#ifndef NRF_FSTORAGE_SD_MAX_RETRIES +#define NRF_FSTORAGE_SD_MAX_RETRIES 8 +#endif + +// <o> NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation +// <i> This value must be a multiple of four. +// <i> Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity. +// <i> This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write. +// <i> That is 1024 bytes for nRF51 ICs and 4096 bytes for nRF52 ICs. + +#ifndef NRF_FSTORAGE_SD_MAX_WRITE_SIZE +#define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 20 +#endif + +// </h> +//========================================================== + +// </e> + +// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 0 +#endif + +// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module +//========================================================== +#ifndef NRF_QUEUE_ENABLED +#define NRF_QUEUE_ENABLED 0 +#endif +// <q> NRF_QUEUE_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_QUEUE_CLI_CMDS +#define NRF_QUEUE_CLI_CMDS 0 +#endif + +// </e> + +// <q> NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator + + +#ifndef NRF_SECTION_ITER_ENABLED +#define NRF_SECTION_ITER_ENABLED 1 +#endif + +// <q> NRF_SORTLIST_ENABLED - nrf_sortlist - Sorted list + + +#ifndef NRF_SORTLIST_ENABLED +#define NRF_SORTLIST_ENABLED 1 +#endif + +// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// </h> +//========================================================== + +// <h> nRF_Log + +//========================================================== +// <h> nrf_log - Logger + +//========================================================== +// <e> NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 0 +#endif +// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// </e> + +// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// <q> NRF_LOG_DEFERRED - Enable deffered logger. + + +// <i> Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 1 +#endif + +// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// <i> Must be power of 2 and multiple of 4. +// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// <i> If set then oldest logs are overwritten. Otherwise a +// <i> marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// <i> Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// </e> + +// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// <h> Log message pool - Configuration of log message pool + +//========================================================== +// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// <i> If a small value is set, then performance of logs processing +// <i> is degraded because data is fragmented. Bigger value impacts +// <i> RAM memory utilization. The size is set to fit a message with +// <i> a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// <i> If a small value is set, then it may lead to a deadlock +// <i> in certain cases if backend has high latency and holds +// <i> multiple messages for long time. Bigger value impacts +// <i> RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// </h> +//========================================================== + +// </e> + +// <h> nrf_log module configuration + +//========================================================== +// <h> nrf_log in nRF_Core + +//========================================================== +// <e> NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Drivers + +//========================================================== +// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// </e> + +// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Libraries + +//========================================================== +// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// <i> If module generates a lot of logs, initial log level can +// <i> be decreased to prevent flooding. Severity level can be +// <i> increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 1 +#endif +// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// <h> nrf_log in nRF_Serialization + +//========================================================== +// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// </e> + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// </h> +//========================================================== + +// <h> nRF_SoftDevice + +//========================================================== +// <e> NRF_SDH_BLE_ENABLED - nrf_sdh_ble - SoftDevice BLE event handler +//========================================================== +#ifndef NRF_SDH_BLE_ENABLED +#define NRF_SDH_BLE_ENABLED 1 +#endif +// <h> BLE Stack configuration - Stack configuration parameters + +// <i> The SoftDevice handler will configure the stack with these parameters when calling @ref nrf_sdh_ble_default_cfg_set. +// <i> Other libraries might depend on these values; keep them up-to-date even if you are not explicitely calling @ref nrf_sdh_ble_default_cfg_set. +//========================================================== +// <o> NRF_SDH_BLE_GAP_DATA_LENGTH <27-251> + + +// <i> Requested BLE GAP data length to be negotiated. + +#ifndef NRF_SDH_BLE_GAP_DATA_LENGTH +#define NRF_SDH_BLE_GAP_DATA_LENGTH 27 +#endif + +// <o> NRF_SDH_BLE_PERIPHERAL_LINK_COUNT - Maximum number of peripheral links. +#ifndef NRF_SDH_BLE_PERIPHERAL_LINK_COUNT +#define NRF_SDH_BLE_PERIPHERAL_LINK_COUNT 1 +#endif + +// <o> NRF_SDH_BLE_CENTRAL_LINK_COUNT - Maximum number of central links. +#ifndef NRF_SDH_BLE_CENTRAL_LINK_COUNT +#define NRF_SDH_BLE_CENTRAL_LINK_COUNT 0 +#endif + +// <o> NRF_SDH_BLE_TOTAL_LINK_COUNT - Total link count. +// <i> Maximum number of total concurrent connections using the default configuration. + +#ifndef NRF_SDH_BLE_TOTAL_LINK_COUNT +#define NRF_SDH_BLE_TOTAL_LINK_COUNT 1 +#endif + +// <o> NRF_SDH_BLE_GAP_EVENT_LENGTH - GAP event length. +// <i> The time set aside for this connection on every connection interval in 1.25 ms units. + +#ifndef NRF_SDH_BLE_GAP_EVENT_LENGTH +#define NRF_SDH_BLE_GAP_EVENT_LENGTH 6 +#endif + +// <o> NRF_SDH_BLE_GATT_MAX_MTU_SIZE - Static maximum MTU size. +#ifndef NRF_SDH_BLE_GATT_MAX_MTU_SIZE +#define NRF_SDH_BLE_GATT_MAX_MTU_SIZE 247 +#endif + +// <o> NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE - Attribute Table size in bytes. The size must be a multiple of 4. +#ifndef NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE +#define NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE 1408 +#endif + +// <o> NRF_SDH_BLE_VS_UUID_COUNT - The number of vendor-specific UUIDs. +#ifndef NRF_SDH_BLE_VS_UUID_COUNT +#define NRF_SDH_BLE_VS_UUID_COUNT 1 +#endif + +// <q> NRF_SDH_BLE_SERVICE_CHANGED - Include the Service Changed characteristic in the Attribute Table. + + +#ifndef NRF_SDH_BLE_SERVICE_CHANGED +#define NRF_SDH_BLE_SERVICE_CHANGED 0 +#endif + +// </h> +//========================================================== + +// <h> BLE Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_BLE_OBSERVER_PRIO_LEVELS - Total number of priority levels for BLE observers. +// <i> This setting configures the number of priority levels available for BLE event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_BLE_OBSERVER_PRIO_LEVELS +#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 4 +#endif + +// <h> BLE Observers priorities - Invididual priorities + +//========================================================== +// <o> BLE_ADV_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Advertising module. + +#ifndef BLE_ADV_BLE_OBSERVER_PRIO +#define BLE_ADV_BLE_OBSERVER_PRIO 1 +#endif + +// <o> BLE_ANCS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Apple Notification Service Client. + +#ifndef BLE_ANCS_C_BLE_OBSERVER_PRIO +#define BLE_ANCS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_ANS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Alert Notification Service Client. + +#ifndef BLE_ANS_C_BLE_OBSERVER_PRIO +#define BLE_ANS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_BAS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Battery Service. + +#ifndef BLE_BAS_BLE_OBSERVER_PRIO +#define BLE_BAS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_BAS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Battery Service Client. + +#ifndef BLE_BAS_C_BLE_OBSERVER_PRIO +#define BLE_BAS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_BPS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Blood Pressure Service. + +#ifndef BLE_BPS_BLE_OBSERVER_PRIO +#define BLE_BPS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_CONN_PARAMS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Connection parameters module. + +#ifndef BLE_CONN_PARAMS_BLE_OBSERVER_PRIO +#define BLE_CONN_PARAMS_BLE_OBSERVER_PRIO 1 +#endif + +// <o> BLE_CONN_STATE_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Connection State module. + +#ifndef BLE_CONN_STATE_BLE_OBSERVER_PRIO +#define BLE_CONN_STATE_BLE_OBSERVER_PRIO 0 +#endif + +// <o> BLE_CSCS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Cycling Speed and Cadence Service. + +#ifndef BLE_CSCS_BLE_OBSERVER_PRIO +#define BLE_CSCS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_CTS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Current Time Service Client. + +#ifndef BLE_CTS_C_BLE_OBSERVER_PRIO +#define BLE_CTS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_DB_DISC_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Database Discovery module. + +#ifndef BLE_DB_DISC_BLE_OBSERVER_PRIO +#define BLE_DB_DISC_BLE_OBSERVER_PRIO 1 +#endif + +// <o> BLE_DFU_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the DFU Service. + +#ifndef BLE_DFU_BLE_OBSERVER_PRIO +#define BLE_DFU_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_DIS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Device Information Client. + +#ifndef BLE_DIS_C_BLE_OBSERVER_PRIO +#define BLE_DIS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_GLS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Glucose Service. + +#ifndef BLE_GLS_BLE_OBSERVER_PRIO +#define BLE_GLS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HIDS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Human Interface Device Service. + +#ifndef BLE_HIDS_BLE_OBSERVER_PRIO +#define BLE_HIDS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HRS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Heart Rate Service. + +#ifndef BLE_HRS_BLE_OBSERVER_PRIO +#define BLE_HRS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HRS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Heart Rate Service Client. + +#ifndef BLE_HRS_C_BLE_OBSERVER_PRIO +#define BLE_HRS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_HTS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Health Thermometer Service. + +#ifndef BLE_HTS_BLE_OBSERVER_PRIO +#define BLE_HTS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_IAS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Immediate Alert Service. + +#ifndef BLE_IAS_BLE_OBSERVER_PRIO +#define BLE_IAS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_IAS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Immediate Alert Service Client. + +#ifndef BLE_IAS_C_BLE_OBSERVER_PRIO +#define BLE_IAS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LBS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the LED Button Service. + +#ifndef BLE_LBS_BLE_OBSERVER_PRIO +#define BLE_LBS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LBS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the LED Button Service Client. + +#ifndef BLE_LBS_C_BLE_OBSERVER_PRIO +#define BLE_LBS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LESC_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the BLE LESC module. + +#ifndef BLE_LESC_OBSERVER_PRIO +#define BLE_LESC_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LLS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Link Loss Service. + +#ifndef BLE_LLS_BLE_OBSERVER_PRIO +#define BLE_LLS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_LNS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Location Navigation Service. + +#ifndef BLE_LNS_BLE_OBSERVER_PRIO +#define BLE_LNS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_NUS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the UART Service. + +#ifndef BLE_NUS_BLE_OBSERVER_PRIO +#define BLE_NUS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_NUS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the UART Central Service. + +#ifndef BLE_NUS_C_BLE_OBSERVER_PRIO +#define BLE_NUS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_OTS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Object transfer service. + +#ifndef BLE_OTS_BLE_OBSERVER_PRIO +#define BLE_OTS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_OTS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Object transfer service client. + +#ifndef BLE_OTS_C_BLE_OBSERVER_PRIO +#define BLE_OTS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_RSCS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Running Speed and Cadence Service. + +#ifndef BLE_RSCS_BLE_OBSERVER_PRIO +#define BLE_RSCS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_RSCS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Running Speed and Cadence Client. + +#ifndef BLE_RSCS_C_BLE_OBSERVER_PRIO +#define BLE_RSCS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BLE_TPS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the TX Power Service. + +#ifndef BLE_TPS_BLE_OBSERVER_PRIO +#define BLE_TPS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> BSP_BTN_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Button Control module. + +#ifndef BSP_BTN_BLE_OBSERVER_PRIO +#define BSP_BTN_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the NFC pairing library. + +#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO +#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NRF_BLE_BMS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Bond Management Service. + +#ifndef NRF_BLE_BMS_BLE_OBSERVER_PRIO +#define NRF_BLE_BMS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_CGMS_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Contiuon Glucose Monitoring Service. + +#ifndef NRF_BLE_CGMS_BLE_OBSERVER_PRIO +#define NRF_BLE_CGMS_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_ES_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Eddystone module. + +#ifndef NRF_BLE_ES_BLE_OBSERVER_PRIO +#define NRF_BLE_ES_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the GATT Service Client. + +#ifndef NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO +#define NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO 2 +#endif + +// <o> NRF_BLE_GATT_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the GATT module. + +#ifndef NRF_BLE_GATT_BLE_OBSERVER_PRIO +#define NRF_BLE_GATT_BLE_OBSERVER_PRIO 1 +#endif + +// <o> NRF_BLE_QWR_BLE_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the Queued writes module. + +#ifndef NRF_BLE_QWR_BLE_OBSERVER_PRIO +#define NRF_BLE_QWR_BLE_OBSERVER_PRIO 2 +#endif + +// <o> PM_BLE_OBSERVER_PRIO - Priority with which BLE events are dispatched to the Peer Manager module. +#ifndef PM_BLE_OBSERVER_PRIO +#define PM_BLE_OBSERVER_PRIO 1 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler +//========================================================== +#ifndef NRF_SDH_ENABLED +#define NRF_SDH_ENABLED 1 +#endif +// <h> Dispatch model + +// <i> This setting configures how Stack events are dispatched to the application. +//========================================================== +// <o> NRF_SDH_DISPATCH_MODEL + + +// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context. +// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler. +// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually. +// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT +// <1=> NRF_SDH_DISPATCH_MODEL_APPSH +// <2=> NRF_SDH_DISPATCH_MODEL_POLLING + +#ifndef NRF_SDH_DISPATCH_MODEL +#define NRF_SDH_DISPATCH_MODEL 0 +#endif + +// </h> +//========================================================== + +// <h> Clock - SoftDevice clock configuration + +//========================================================== +// <o> NRF_SDH_CLOCK_LF_SRC - SoftDevice clock source. + +// <0=> NRF_CLOCK_LF_SRC_RC +// <1=> NRF_CLOCK_LF_SRC_XTAL +// <2=> NRF_CLOCK_LF_SRC_SYNTH + +#ifndef NRF_SDH_CLOCK_LF_SRC +#define NRF_SDH_CLOCK_LF_SRC 1 +#endif + +// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval. +#ifndef NRF_SDH_CLOCK_LF_RC_CTIV +#define NRF_SDH_CLOCK_LF_RC_CTIV 0 +#endif + +// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature. +// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated +// <i> if the temperature has not changed. + +#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV +#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0 +#endif + +// <o> NRF_SDH_CLOCK_LF_ACCURACY - External clock accuracy used in the LL to compute timing. + +// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM +// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM +// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM +// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM +// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM +// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM +// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM +// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM +// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM +// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM +// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM +// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM + +#ifndef NRF_SDH_CLOCK_LF_ACCURACY +#define NRF_SDH_CLOCK_LF_ACCURACY 7 +#endif + +// </h> +//========================================================== + +// <h> SDH Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers. +// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS +#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2 +#endif + +// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers. +// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS +#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2 +#endif + +// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers. +// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC). +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS +#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2 +#endif + + +// <h> State Observers priorities - Invididual priorities + +//========================================================== +// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to the Clock driver. + +#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO +#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// <o> POWER_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to the Power driver. + +#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO +#define POWER_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// <o> RNG_CONFIG_STATE_OBSERVER_PRIO +// <i> Priority with which state events are dispatched to this module. + +#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO +#define RNG_CONFIG_STATE_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// <h> Stack Event Observers priorities - Invididual priorities + +//========================================================== +// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO +#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0 +#endif + +// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO +#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0 +#endif + +// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO +// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack. +// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE. +// <i> Zero is the highest priority. + +#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO +#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler +//========================================================== +#ifndef NRF_SDH_SOC_ENABLED +#define NRF_SDH_SOC_ENABLED 1 +#endif +// <h> SoC Observers - Observers and priority levels + +//========================================================== +// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers. +// <i> This setting configures the number of priority levels available for the SoC event handlers. +// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers. + +#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS +#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2 +#endif + +// <h> SoC Observers priorities - Invididual priorities + +//========================================================== +// <o> BLE_ADV_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Advertising module. + +#ifndef BLE_ADV_SOC_OBSERVER_PRIO +#define BLE_ADV_SOC_OBSERVER_PRIO 1 +#endif + +// <o> BLE_DFU_SOC_OBSERVER_PRIO +// <i> Priority with which BLE events are dispatched to the DFU Service. + +#ifndef BLE_DFU_SOC_OBSERVER_PRIO +#define BLE_DFU_SOC_OBSERVER_PRIO 1 +#endif + +// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Clock driver. + +#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO +#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0 +#endif + +// <o> POWER_CONFIG_SOC_OBSERVER_PRIO +// <i> Priority with which SoC events are dispatched to the Power driver. + +#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO +#define POWER_CONFIG_SOC_OBSERVER_PRIO 0 +#endif + +// </h> +//========================================================== + +// </h> +//========================================================== + + +// </e> + +// </h> +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + |