diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/include/mbedtls/aes.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/include/mbedtls/aes.h | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/include/mbedtls/aes.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/include/mbedtls/aes.h new file mode 100644 index 0000000..a36e825 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/include/mbedtls/aes.h @@ -0,0 +1,297 @@ +/** + * \file aes.h + * + * \brief AES block cipher + * + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ +#ifndef MBEDTLS_AES_H +#define MBEDTLS_AES_H + +#if !defined(MBEDTLS_CONFIG_FILE) +#include "config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include <stddef.h> +#include <stdint.h> + +/* padlock.c and aesni.c rely on these values! */ +#define MBEDTLS_AES_ENCRYPT 1 +#define MBEDTLS_AES_DECRYPT 0 + +#define MBEDTLS_ERR_AES_INVALID_KEY_LENGTH -0x0020 /**< Invalid key length. */ +#define MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH -0x0022 /**< Invalid data input length. */ + +#if !defined(MBEDTLS_AES_ALT) +// Regular implementation +// + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief AES context structure + * + * \note buf is able to hold 32 extra bytes, which can be used: + * - for alignment purposes if VIA padlock is used, and/or + * - to simplify key expansion in the 256-bit case by + * generating an extra round key + */ +typedef struct +{ + int nr; /*!< number of rounds */ + uint32_t *rk; /*!< AES round keys */ + uint32_t buf[68]; /*!< unaligned data */ +} +mbedtls_aes_context; + +/** + * \brief Initialize AES context + * + * \param ctx AES context to be initialized + */ +void mbedtls_aes_init( mbedtls_aes_context *ctx ); + +/** + * \brief Clear AES context + * + * \param ctx AES context to be cleared + */ +void mbedtls_aes_free( mbedtls_aes_context *ctx ); + +/** + * \brief AES key schedule (encryption) + * + * \param ctx AES context to be initialized + * \param key encryption key + * \param keybits must be 128, 192 or 256 + * + * \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH + */ +int mbedtls_aes_setkey_enc( mbedtls_aes_context *ctx, const unsigned char *key, + unsigned int keybits ); + +/** + * \brief AES key schedule (decryption) + * + * \param ctx AES context to be initialized + * \param key decryption key + * \param keybits must be 128, 192 or 256 + * + * \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH + */ +int mbedtls_aes_setkey_dec( mbedtls_aes_context *ctx, const unsigned char *key, + unsigned int keybits ); + +/** + * \brief AES-ECB block encryption/decryption + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param input 16-byte input block + * \param output 16-byte output block + * + * \return 0 if successful + */ +int mbedtls_aes_crypt_ecb( mbedtls_aes_context *ctx, + int mode, + const unsigned char input[16], + unsigned char output[16] ); + +#if defined(MBEDTLS_CIPHER_MODE_CBC) +/** + * \brief AES-CBC buffer encryption/decryption + * Length should be a multiple of the block + * size (16 bytes) + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param length length of the input data + * \param iv initialization vector (updated after use) + * \param input buffer holding the input data + * \param output buffer holding the output data + * + * \return 0 if successful, or MBEDTLS_ERR_AES_INVALID_INPUT_LENGTH + */ +int mbedtls_aes_crypt_cbc( mbedtls_aes_context *ctx, + int mode, + size_t length, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CBC */ + +#if defined(MBEDTLS_CIPHER_MODE_CFB) +/** + * \brief AES-CFB128 buffer encryption/decryption. + * + * Note: Due to the nature of CFB you should use the same key schedule for + * both encryption and decryption. So a context initialized with + * mbedtls_aes_setkey_enc() for both MBEDTLS_AES_ENCRYPT and MBEDTLS_AES_DECRYPT. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param length length of the input data + * \param iv_off offset in IV (updated after use) + * \param iv initialization vector (updated after use) + * \param input buffer holding the input data + * \param output buffer holding the output data + * + * \return 0 if successful + */ +int mbedtls_aes_crypt_cfb128( mbedtls_aes_context *ctx, + int mode, + size_t length, + size_t *iv_off, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); + +/** + * \brief AES-CFB8 buffer encryption/decryption. + * + * Note: Due to the nature of CFB you should use the same key schedule for + * both encryption and decryption. So a context initialized with + * mbedtls_aes_setkey_enc() for both MBEDTLS_AES_ENCRYPT and MBEDTLS_AES_DECRYPT. + * + * \note Upon exit, the content of the IV is updated so that you can + * call the function same function again on the following + * block(s) of data and get the same result as if it was + * encrypted in one call. This allows a "streaming" usage. + * If on the other hand you need to retain the contents of the + * IV, you should either save it manually or use the cipher + * module instead. + * + * \param ctx AES context + * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT + * \param length length of the input data + * \param iv initialization vector (updated after use) + * \param input buffer holding the input data + * \param output buffer holding the output data + * + * \return 0 if successful + */ +int mbedtls_aes_crypt_cfb8( mbedtls_aes_context *ctx, + int mode, + size_t length, + unsigned char iv[16], + const unsigned char *input, + unsigned char *output ); +#endif /*MBEDTLS_CIPHER_MODE_CFB */ + +#if defined(MBEDTLS_CIPHER_MODE_CTR) +/** + * \brief AES-CTR buffer encryption/decryption + * + * Warning: You have to keep the maximum use of your counter in mind! + * + * Note: Due to the nature of CTR you should use the same key schedule for + * both encryption and decryption. So a context initialized with + * mbedtls_aes_setkey_enc() for both MBEDTLS_AES_ENCRYPT and MBEDTLS_AES_DECRYPT. + * + * \param ctx AES context + * \param length The length of the data + * \param nc_off The offset in the current stream_block (for resuming + * within current cipher stream). The offset pointer to + * should be 0 at the start of a stream. + * \param nonce_counter The 128-bit nonce and counter. + * \param stream_block The saved stream-block for resuming. Is overwritten + * by the function. + * \param input The input data stream + * \param output The output data stream + * + * \return 0 if successful + */ +int mbedtls_aes_crypt_ctr( mbedtls_aes_context *ctx, + size_t length, + size_t *nc_off, + unsigned char nonce_counter[16], + unsigned char stream_block[16], + const unsigned char *input, + unsigned char *output ); +#endif /* MBEDTLS_CIPHER_MODE_CTR */ + +/** + * \brief Internal AES block encryption function + * (Only exposed to allow overriding it, + * see MBEDTLS_AES_ENCRYPT_ALT) + * + * \param ctx AES context + * \param input Plaintext block + * \param output Output (ciphertext) block + */ +void mbedtls_aes_encrypt( mbedtls_aes_context *ctx, + const unsigned char input[16], + unsigned char output[16] ); + +/** + * \brief Internal AES block decryption function + * (Only exposed to allow overriding it, + * see MBEDTLS_AES_DECRYPT_ALT) + * + * \param ctx AES context + * \param input Ciphertext block + * \param output Output (plaintext) block + */ +void mbedtls_aes_decrypt( mbedtls_aes_context *ctx, + const unsigned char input[16], + unsigned char output[16] ); + +#ifdef __cplusplus +} +#endif + +#else /* MBEDTLS_AES_ALT */ +#include "aes_alt.h" +#endif /* MBEDTLS_AES_ALT */ + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * \brief Checkup routine + * + * \return 0 if successful, or 1 if the test failed + */ +int mbedtls_aes_self_test( int verbose ); + +#ifdef __cplusplus +} +#endif + +#endif /* aes.h */ |