diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest')
2 files changed, 350 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest/README.md b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest/README.md new file mode 100644 index 0000000..5bc22a6 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest/README.md @@ -0,0 +1,82 @@ +# mbed TLS Selftest Example + +This application runs the various selftest functions of individual mbed TLS components. It serves as a basic sanity check to verify operation of mbed TLS on your platform. In the future, a wider portion of the mbed TLS test suite will become part of this example application. + +## Pre-requisites + +To build and run this example you must have: + +* A computer with the following software installed: + * [CMake](http://www.cmake.org/download/). + * [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows). + * [Python](https://www.python.org/downloads/). + * [The ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded). + * A serial terminal emulator (Like screen, pySerial and cu). +* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below). +* A micro-USB cable. +* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration). + +## Getting started + +1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the "OpenSDA" connector on the target board. + +2. Navigate to the mbedtls directory supplied with your release and open a terminal. + +3. Set the yotta target: + + ``` + yotta target frdm-k64f-gcc + ``` + +4. Build mbedtls and the examples. This may take a long time if this is your first compilation: + + ``` + $ yotta build + ``` + +5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-selftest.bin` to your mbed board and wait until the LED next to the USB port stops blinking. + +6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. + + Use the following settings: + + * 115200 baud (not 9600). + * 8N1. + * No flow control. + +7. Press the Reset button on the board. + +8. The output in the terminal window should look like: + + ``` + {{timeout;40}} + {{host_test_name;default}} + {{description;mbed TLS selftest program}} + {{test_id;MBEDTLS_SELFTEST}} + {{start}} + + SHA-224 test #1: passed + SHA-224 test #2: passed + SHA-224 test #3: passed + SHA-256 test #1: passed + SHA-256 test #2: passed + SHA-256 test #3: passed + + [ ... several lines omitted ... ] + + CTR_DRBG (PR = TRUE) : passed + CTR_DRBG (PR = FALSE): passed + + HMAC_DRBG (PR = True) : passed + HMAC_DRBG (PR = False) : passed + + ECP test #1 (constant op_count, base point G): passed + ECP test #2 (constant op_count, other point): passed + + ENTROPY test: passed + + [ All tests passed ] + + {{success}} + {{end}} + ``` diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest/main.cpp b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest/main.cpp new file mode 100644 index 0000000..0ff5b04 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-selftest/main.cpp @@ -0,0 +1,268 @@ +/* + * Self-test demonstration program + * + * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + * This file is part of mbed TLS (https://tls.mbed.org) + */ + +#if !defined(POLARSSL_CONFIG_FILE) +#include "mbedtls/config.h" +#else +#include MBEDTLS_CONFIG_FILE +#endif + +#include "mbedtls/entropy.h" +#include "mbedtls/hmac_drbg.h" +#include "mbedtls/ctr_drbg.h" +#include "mbedtls/dhm.h" +#include "mbedtls/gcm.h" +#include "mbedtls/ccm.h" +#include "mbedtls/md2.h" +#include "mbedtls/md4.h" +#include "mbedtls/md5.h" +#include "mbedtls/ripemd160.h" +#include "mbedtls/sha1.h" +#include "mbedtls/sha256.h" +#include "mbedtls/sha512.h" +#include "mbedtls/arc4.h" +#include "mbedtls/des.h" +#include "mbedtls/aes.h" +#include "mbedtls/camellia.h" +#include "mbedtls/base64.h" +#include "mbedtls/bignum.h" +#include "mbedtls/rsa.h" +#include "mbedtls/x509.h" +#include "mbedtls/xtea.h" +#include "mbedtls/pkcs5.h" +#include "mbedtls/ecp.h" + +#include <stdio.h> +#include <string.h> + +#if defined(MBEDTLS_PLATFORM_C) +#include "mbedtls/platform.h" +#else +#include <stdio.h> +#define mbedtls_printf printf +#endif + +#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) +#include "mbedtls/memory_buffer_alloc.h" +#endif + +int selftest( int argc, char *argv[] ) +{ + int ret = 0, v; +#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) + unsigned char buf[1000000]; +#endif + + if( argc == 2 && strcmp( argv[1], "-quiet" ) == 0 ) + v = 0; + else + { + v = 1; + mbedtls_printf( "\n" ); + } + +#if defined(MBEDTLS_SELF_TEST) + +#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) + mbedtls_memory_buffer_alloc_init( buf, sizeof(buf) ); +#endif + +#if defined(MBEDTLS_MD2_C) + if( ( ret = mbedtls_md2_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_MD4_C) + if( ( ret = mbedtls_md4_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_MD5_C) + if( ( ret = mbedtls_md5_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_RIPEMD160_C) + if( ( ret = mbedtls_ripemd160_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_SHA1_C) + if( ( ret = mbedtls_sha1_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_SHA256_C) + if( ( ret = mbedtls_sha256_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_SHA512_C) + if( ( ret = mbedtls_sha512_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_ARC4_C) + if( ( ret = mbedtls_arc4_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_DES_C) + if( ( ret = mbedtls_des_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_AES_C) + if( ( ret = mbedtls_aes_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_GCM_C) && defined(MBEDTLS_AES_C) + if( ( ret = mbedtls_gcm_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_CCM_C) && defined(MBEDTLS_AES_C) + if( ( ret = mbedtls_ccm_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_BASE64_C) + if( ( ret = mbedtls_base64_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_BIGNUM_C) + if( ( ret = mbedtls_mpi_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_RSA_C) + if( ( ret = mbedtls_rsa_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_X509_USE_C) + if( ( ret = mbedtls_x509_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_XTEA_C) + if( ( ret = mbedtls_xtea_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_CAMELLIA_C) + if( ( ret = mbedtls_camellia_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_CTR_DRBG_C) + if( ( ret = mbedtls_ctr_drbg_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_HMAC_DRBG_C) + if( ( ret = mbedtls_hmac_drbg_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_ECP_C) + if( ( ret = mbedtls_ecp_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_DHM_C) + if( ( ret = mbedtls_dhm_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_ENTROPY_C) + if( ( ret = mbedtls_entropy_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_PKCS5_C) + if( ( ret = mbedtls_pkcs5_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#if defined(MBEDTLS_TIMING_C) + if( ( ret = mbedtls_timing_self_test( v ) ) != 0 ) + return( ret ); +#endif + +#else + mbedtls_printf( " POLARSSL_SELF_TEST not defined.\n" ); +#endif + + if( v != 0 ) + { +#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) && defined(MBEDTLS_MEMORY_DEBUG) + mbedtls_memory_buffer_alloc_status(); +#endif + } + +#if defined(MBEDTLS_MEMORY_BUFFER_ALLOC_C) + mbedtls_memory_buffer_alloc_free(); + + if( ( ret = mbedtls_memory_buffer_alloc_self_test( v ) ) != 0 ) + return( ret ); +#endif + + if( v != 0 ) + { + mbedtls_printf( " [ All tests passed ]\n\n" ); +#if defined(_WIN32) + mbedtls_printf( " Press Enter to exit this program.\n" ); + fflush( stdout ); getchar(); +#endif + } + + return( ret ); +} + +#if defined(TARGET_LIKE_MBED) + +#include "mbed-drivers/test_env.h" +#include "minar/minar.h" + +static void run() { + MBED_HOSTTEST_TIMEOUT(40); + MBED_HOSTTEST_SELECT(default); + MBED_HOSTTEST_DESCRIPTION(mbed TLS selftest program); + MBED_HOSTTEST_START("MBEDTLS_SELFTEST"); + MBED_HOSTTEST_RESULT(selftest(0, NULL) == 0); +} + +void app_start(int, char*[]) { + /* Use 115200 bps for consistency with other examples */ + get_stdio_serial().baud(115200); + minar::Scheduler::postCallback(mbed::util::FunctionPointer0<void>(run).bind()); +} + +#else + +int main() { + return selftest(0, NULL); +} + +#endif |