diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/external/segger_rtt/SEGGER_RTT_Syscalls_KEIL.c')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/external/segger_rtt/SEGGER_RTT_Syscalls_KEIL.c | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/segger_rtt/SEGGER_RTT_Syscalls_KEIL.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/segger_rtt/SEGGER_RTT_Syscalls_KEIL.c new file mode 100644 index 0000000..1f9f4f7 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/segger_rtt/SEGGER_RTT_Syscalls_KEIL.c @@ -0,0 +1,383 @@ +/********************************************************************* +* SEGGER Microcontroller GmbH & Co. KG * +* The Embedded Experts * +********************************************************************** +* * +* (c) 2014 - 2017 SEGGER Microcontroller GmbH & Co. KG * +* * +* www.segger.com Support: support@segger.com * +* * +********************************************************************** +* * +* SEGGER RTT * Real Time Transfer for embedded targets * +* * +********************************************************************** +* * +* All rights reserved. * +* * +* SEGGER strongly recommends to not make any changes * +* to or modify the source code of this software in order to stay * +* compatible with the RTT protocol and J-Link. * +* * +* Redistribution and use in source and binary forms, with or * +* without modification, are permitted provided that the following * +* conditions are met: * +* * +* o Redistributions of source code must retain the above copyright * +* notice, this list of conditions and the following disclaimer. * +* * +* o Redistributions in binary form must reproduce the above * +* copyright notice, this list of conditions and the following * +* disclaimer in the documentation and/or other materials provided * +* with the distribution. * +* * +* o Neither the name of SEGGER Microcontroller GmbH & Co. KG * +* nor the names of its contributors may be used to endorse or * +* promote products derived from this software without specific * +* prior written permission. * +* * +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * +* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, * +* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * +* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * +* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR * +* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * +* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * +* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; * +* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * +* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE * +* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * +* DAMAGE. * +* * +********************************************************************** +* * +* RTT version: 6.18a * +* * +********************************************************************** +---------------------------END-OF-HEADER------------------------------ +File : RTT_Syscalls_KEIL.c +Purpose : Retargeting module for KEIL MDK-CM3. + Low-level functions for using printf() via RTT +Revision: $Rev: 4351 $ +---------------------------------------------------------------------- +*/ +#include "sdk_config.h" +#if !defined(RETARGET_ENABLED) || RETARGET_ENABLED == 0 +#ifdef __CC_ARM + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <rt_sys.h> +#include <rt_misc.h> + +#include "SEGGER_RTT.h" +/********************************************************************* +* +* #pragmas +* +********************************************************************** +*/ +#if defined(NRF_LOG_ENABLED) && NRF_LOG_ENABLED == 1 + #pragma import(__use_no_semihosting) +#endif + +#ifdef _MICROLIB + #pragma import(__use_full_stdio) +#endif + +/********************************************************************* +* +* Defines non-configurable +* +********************************************************************** +*/ + +/* Standard IO device handles - arbitrary, but any real file system handles must be + less than 0x8000. */ +#define STDIN 0x8001 // Standard Input Stream +#define STDOUT 0x8002 // Standard Output Stream +#define STDERR 0x8003 // Standard Error Stream + +/********************************************************************* +* +* Public const +* +********************************************************************** +*/ +//const char __stdin_name[] = "STDIN"; +const char __stdout_name[] = "STDOUT"; +const char __stderr_name[] = "STDERR"; + +/********************************************************************* +* +* Public code +* +********************************************************************** +*/ + +/********************************************************************* +* +* _ttywrch +* +* Function description: +* Outputs a character to the console +* +* Parameters: +* c - character to output +* +*/ +void _ttywrch(int c) { + fputc(c, stdout); // stdout + fflush(stdout); +} + +/********************************************************************* +* +* _sys_open +* +* Function description: +* Opens the device/file in order to do read/write operations +* +* Parameters: +* sName - sName of the device/file to open +* OpenMode - This parameter is currently ignored +* +* Return value: +* != 0 - Handle to the object to open, otherwise +* == 0 -"device" is not handled by this module +* +*/ +FILEHANDLE _sys_open(const char * sName, int OpenMode) { + (void)OpenMode; + // Register standard Input Output devices. + if (strcmp(sName, __stdout_name) == 0) { + return (STDOUT); + } else if (strcmp(sName, __stderr_name) == 0) { + return (STDERR); + } else + return (0); // Not implemented +} + +/********************************************************************* +* +* _sys_close +* +* Function description: +* Closes the handle to the open device/file +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* +* Return value: +* 0 - device/file closed +* +*/ +int _sys_close(FILEHANDLE hFile) { + (void)hFile; + return 0; // Not implemented +} + +/********************************************************************* +* +* _sys_write +* +* Function description: +* Writes the data to an open handle. +* Currently this function only outputs data to the console +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* pBuffer - Pointer to the data that shall be written +* NumBytes - Number of bytes to write +* Mode - The Mode that shall be used +* +* Return value: +* Number of bytes *not* written to the file/device +* +*/ +int _sys_write(FILEHANDLE hFile, const unsigned char * pBuffer, unsigned NumBytes, int Mode) { + int r = 0; + + (void)Mode; + if (hFile == STDOUT) { + return NumBytes - SEGGER_RTT_Write(0, (const char*)pBuffer, NumBytes); + } + return r; +} + +/********************************************************************* +* +* _sys_read +* +* Function description: +* Reads data from an open handle. +* Currently this modules does nothing. +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* pBuffer - Pointer to buffer to store the read data +* NumBytes - Number of bytes to read +* Mode - The Mode that shall be used +* +* Return value: +* Number of bytes read from the file/device +* +*/ +int _sys_read(FILEHANDLE hFile, unsigned char * pBuffer, unsigned NumBytes, int Mode) { + (void)hFile; + (void)pBuffer; + (void)NumBytes; + (void)Mode; + return (0); // Not implemented +} + +/********************************************************************* +* +* _sys_istty +* +* Function description: +* This function shall return whether the opened file +* is a console device or not. +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* +* Return value: +* 1 - Device is a console +* 0 - Device is not a console +* +*/ +int _sys_istty(FILEHANDLE hFile) { + if (hFile > 0x8000) { + return (1); + } + return (0); // Not implemented +} + +/********************************************************************* +* +* _sys_seek +* +* Function description: +* Seeks via the file to a specific position +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* Pos - +* +* Return value: +* int - +* +*/ +int _sys_seek(FILEHANDLE hFile, long Pos) { + (void)hFile; + (void)Pos; + return (0); // Not implemented +} + +/********************************************************************* +* +* _sys_ensure +* +* Function description: +* +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* +* Return value: +* int - +* +*/ +int _sys_ensure(FILEHANDLE hFile) { + (void)hFile; + return (-1); // Not implemented +} + +/********************************************************************* +* +* _sys_flen +* +* Function description: +* Returns the length of the opened file handle +* +* Parameters: +* hFile - Handle to a file opened via _sys_open +* +* Return value: +* Length of the file +* +*/ +long _sys_flen(FILEHANDLE hFile) { + (void)hFile; + return (0); // Not implemented +} + +/********************************************************************* +* +* _sys_tmpnam +* +* Function description: +* This function converts the file number fileno for a temporary +* file to a unique filename, for example, tmp0001. +* +* Parameters: +* pBuffer - Pointer to a buffer to store the name +* FileNum - file number to convert +* MaxLen - Size of the buffer +* +* Return value: +* 1 - Error +* 0 - Success +* +*/ +int _sys_tmpnam(char * pBuffer, int FileNum, unsigned MaxLen) { + (void)pBuffer; + (void)FileNum; + (void)MaxLen; + return (1); // Not implemented +} + +/********************************************************************* +* +* _sys_command_string +* +* Function description: +* This function shall execute a system command. +* +* Parameters: +* cmd - Pointer to the command string +* len - Length of the string +* +* Return value: +* == NULL - Command was not successfully executed +* == sCmd - Command was passed successfully +* +*/ +char * _sys_command_string(char * cmd, int len) { + (void)len; + return cmd; // Not implemented +} + +/********************************************************************* +* +* _sys_exit +* +* Function description: +* This function is called when the application returns from main +* +* Parameters: +* ReturnCode - Return code from the main function +* +* +*/ +void _sys_exit(int ReturnCode) { + (void)ReturnCode; + while (1); // Not implemented +} + +#endif // __CC_ARM +#endif // !defined(RETARGET_ENABLED) || RETARGET_ENABLED == 0 +/*************************** End of file ****************************/ |