diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_comp.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_comp.h | 247 |
1 files changed, 247 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_comp.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_comp.h new file mode 100644 index 0000000..8b4ee44 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_comp.h @@ -0,0 +1,247 @@ +/** + * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef NRFX_COMP_H__ +#define NRFX_COMP_H__ + +#include <nrfx.h> +#include <hal/nrf_comp.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup nrfx_comp COMP driver + * @{ + * @ingroup nrf_comp + * @brief Comparator (COMP) peripheral driver. + */ + +/** + * @brief Macro to convert the threshold voltage to an integer value + * (needed by the COMP_TH register). + * + * @param[in] vol Voltage to be changed to COMP_TH register value. This value + * must not be smaller than reference voltage divided by 64. + * @param[in] ref Reference voltage. + */ +#define NRFX_VOLTAGE_THRESHOLD_TO_INT(vol, ref) \ + (uint8_t)(((vol) > ((ref) / 64)) ? (NRFX_ROUNDED_DIV((vol) * 64,(ref)) - 1) : 0) + +/** + * @brief COMP event handler function type. + * @param[in] event COMP event. + */ +typedef void (* nrfx_comp_event_handler_t)(nrf_comp_event_t event); + +/** @brief COMP shortcut masks. */ +typedef enum +{ + NRFX_COMP_SHORT_STOP_AFTER_CROSS_EVT = COMP_SHORTS_CROSS_STOP_Msk, /*!< Shortcut between the CROSS event and the STOP task. */ + NRFX_COMP_SHORT_STOP_AFTER_UP_EVT = COMP_SHORTS_UP_STOP_Msk, /*!< Shortcut between the UP event and the STOP task. */ + NRFX_COMP_SHORT_STOP_AFTER_DOWN_EVT = COMP_SHORTS_DOWN_STOP_Msk /*!< Shortcut between the DOWN event and the STOP task. */ +} nrfx_comp_short_mask_t; + +/** @brief COMP events masks. */ +typedef enum +{ + NRFX_COMP_EVT_EN_CROSS_MASK = COMP_INTENSET_CROSS_Msk, /*!< CROSS event (generated after VIN+ == VIN-). */ + NRFX_COMP_EVT_EN_UP_MASK = COMP_INTENSET_UP_Msk, /*!< UP event (generated when VIN+ crosses VIN- while increasing). */ + NRFX_COMP_EVT_EN_DOWN_MASK = COMP_INTENSET_DOWN_Msk, /*!< DOWN event (generated when VIN+ crosses VIN- while decreasing). */ + NRFX_COMP_EVT_EN_READY_MASK = COMP_INTENSET_READY_Msk /*!< READY event (generated when the module is ready). */ +} nrfx_comp_evt_en_mask_t; + +/** @brief COMP configuration. */ +typedef struct +{ + nrf_comp_ref_t reference; /**< Reference selection. */ + nrf_comp_ext_ref_t ext_ref; /**< External analog reference selection. */ + nrf_comp_main_mode_t main_mode; /**< Main operation mode. */ + nrf_comp_th_t threshold; /**< Structure holding THDOWN and THUP values needed by the COMP_TH register. */ + nrf_comp_sp_mode_t speed_mode; /**< Speed and power mode. */ + nrf_comp_hyst_t hyst; /**< Comparator hysteresis.*/ +#if defined (COMP_ISOURCE_ISOURCE_Msk) || defined (__NRFX_DOXYGEN__) + nrf_isource_t isource; /**< Current source selected on analog input. */ +#endif + nrf_comp_input_t input; /**< Input to be monitored. */ + uint8_t interrupt_priority; /**< Interrupt priority. */ +} nrfx_comp_config_t; + +/** @brief COMP threshold default configuration. */ +#define NRFX_COMP_CONFIG_TH \ +{ \ + .th_down = NRFX_VOLTAGE_THRESHOLD_TO_INT(0.5, 1.8), \ + .th_up = NRFX_VOLTAGE_THRESHOLD_TO_INT(1.5, 1.8) \ +} + +/** @brief COMP driver default configuration including the COMP HAL configuration. */ +#if defined (COMP_ISOURCE_ISOURCE_Msk) || defined (__NRFX_DOXYGEN__) +#define NRFX_COMP_DEFAULT_CONFIG(_input) \ +{ \ + .reference = (nrf_comp_ref_t)NRFX_COMP_CONFIG_REF, \ + .main_mode = (nrf_comp_main_mode_t)NRFX_COMP_CONFIG_MAIN_MODE, \ + .threshold = NRFX_COMP_CONFIG_TH, \ + .speed_mode = (nrf_comp_sp_mode_t)NRFX_COMP_CONFIG_SPEED_MODE, \ + .hyst = (nrf_comp_hyst_t)NRFX_COMP_CONFIG_HYST, \ + .isource = (nrf_isource_t)NRFX_COMP_CONFIG_ISOURCE, \ + .input = (nrf_comp_input_t)_input, \ + .interrupt_priority = NRFX_COMP_CONFIG_IRQ_PRIORITY \ +} +#else +#define NRFX_COMP_DEFAULT_CONFIG(_input) \ +{ \ + .reference = (nrf_comp_ref_t)NRFX_COMP_CONFIG_REF, \ + .main_mode = (nrf_comp_main_mode_t)NRFX_COMP_CONFIG_MAIN_MODE, \ + .threshold = NRFX_COMP_CONFIG_TH, \ + .speed_mode = (nrf_comp_sp_mode_t)NRFX_COMP_CONFIG_SPEED_MODE, \ + .hyst = (nrf_comp_hyst_t)NRFX_COMP_CONFIG_HYST, \ + .input = (nrf_comp_input_t)_input, \ + .interrupt_priority = NRFX_COMP_CONFIG_IRQ_PRIORITY \ +} +#endif + +/** + * @brief Function for initializing the COMP driver. + * + * This function initializes the COMP driver, but does not enable the peripheral or any interrupts. + * To start the driver, call the function @ref nrfx_comp_start() after initialization. + * + * @param[in] p_config Pointer to the structure with initial configuration. + * @param[in] event_handler Event handler provided by the user. + * Must not be NULL. + * + * @retval NRFX_SUCCESS If initialization was successful. + * @retval NRFX_ERROR_INVALID_STATE If the driver has already been initialized. + * @retval NRFX_ERROR_BUSY If the LPCOMP peripheral is already in use. + * This is possible only if @ref nrfx_prs module + * is enabled. + */ +nrfx_err_t nrfx_comp_init(nrfx_comp_config_t const * p_config, + nrfx_comp_event_handler_t event_handler); + + +/** + * @brief Function for uninitializing the COMP driver. + * + * This function uninitializes the COMP driver. The COMP peripheral and + * its interrupts are disabled, and local variables are cleaned. After this call, you must + * initialize the driver again by calling nrfx_comp_init() if you want to use it. + * + * @sa nrfx_comp_stop() + */ +void nrfx_comp_uninit(void); + +/** + * @brief Function for setting the analog input. + * + * @param[in] psel COMP analog pin selection. + */ +void nrfx_comp_pin_select(nrf_comp_input_t psel); + +/** + * @brief Function for starting the COMP peripheral and interrupts. + * + * Before calling this function, the driver must be initialized. This function + * enables the COMP peripheral and its interrupts. + * + * @param[in] comp_evt_en_mask Mask of events to be enabled. This parameter should be built as + * 'or' of elements from @ref nrfx_comp_evt_en_mask_t. + * @param[in] comp_shorts_mask Mask of shorts to be enabled. This parameter should be built as + * 'or' of elements from @ref nrfx_comp_short_mask_t. + * + * @sa nrfx_comp_init() + * + */ +void nrfx_comp_start(uint32_t comp_evt_en_mask, uint32_t comp_shorts_mask); + +/**@brief Function for stopping the COMP peripheral. + * + * Before calling this function, the driver must be enabled. This function disables the COMP + * peripheral and its interrupts. + * + * @sa nrfx_comp_uninit() + * + */ +void nrfx_comp_stop(void); + +/** + * @brief Function for copying the current state of the comparator result to the RESULT register. + * + * @retval 0 If the input voltage is below the threshold (VIN+ < VIN-). + * @retval 1 If the input voltage is above the threshold (VIN+ > VIN-). + */ +uint32_t nrfx_comp_sample(void); + +/** + * @brief Function for getting the address of a COMP task. + * + * @param[in] task COMP task. + * + * @return Address of the given COMP task. + */ +__STATIC_INLINE uint32_t nrfx_comp_task_address_get(nrf_comp_task_t task) +{ + return (uint32_t)nrf_comp_task_address_get(task); +} + +/** + * @brief Function for getting the address of a COMP event. + * + * @param[in] event COMP event. + * + * @return Address of the given COMP event. + */ +__STATIC_INLINE uint32_t nrfx_comp_event_address_get(nrf_comp_event_t event) +{ + return (uint32_t)nrf_comp_event_address_get(event); +} + + +void nrfx_comp_irq_handler(void); + + +/** @} **/ + +#ifdef __cplusplus +} +#endif + +#endif // NRFX_COMP_H__ |