diff options
| author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-04-15 15:13:36 +0000 |
|---|---|---|
| committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-04-15 15:13:36 +0000 |
| commit | 0bc7d2c692d1236b45423e30cb6da1aac4f2aa4d (patch) | |
| tree | 88b8da94aa6c908272d22d8c4f57bcdd0abfb55d | |
| parent | 1552562b3a9dd74c224c19dc54713770fed323a5 (diff) | |
| download | openocd+libswd-0bc7d2c692d1236b45423e30cb6da1aac4f2aa4d.tar.gz openocd+libswd-0bc7d2c692d1236b45423e30cb6da1aac4f2aa4d.tar.bz2 openocd+libswd-0bc7d2c692d1236b45423e30cb6da1aac4f2aa4d.tar.xz openocd+libswd-0bc7d2c692d1236b45423e30cb6da1aac4f2aa4d.zip | |
Freddie Chopin <freddie_chopin@op.pl> LPC2378 config file
git-svn-id: svn://svn.berlios.de/openocd/trunk@1458 b42882b7-edfa-0310-969c-e2dbd0fdcd60
| -rw-r--r-- | src/target/target/lpc2378.cfg | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/src/target/target/lpc2378.cfg b/src/target/target/lpc2378.cfg new file mode 100644 index 00000000..386fae07 --- /dev/null +++ b/src/target/target/lpc2378.cfg @@ -0,0 +1,49 @@ +# NXP LPC2378 ARM7TDMI-S with 512kB Flash and 32kB Local On-Chip SRAM (58kB total), clocked with 4MHz internal RC oscillator
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME lpc2378
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ set _CPUTAPID 0x4f1f0f0f
+}
+
+#delays on reset lines
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+# LPC2000 -> SRST causes TRST
+reset_config trst_and_srst srst_pulls_trst
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0
+
+$_TARGETNAME configure -event reset-init {
+ # Force target into ARM state
+ soft_reset_halt
+ #do not remap 0x0000-0x0020 to anything but the flash
+ mwb 0xE01FC040 0x01
+}
+
+# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
+# After reset the chip uses its internal 4MHz RC oscillator
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum
+
+# 4MHz / 6 = 666kHz, so use 500
+jtag_khz 500
|