summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-05-29 04:00:51 +0000
committerzwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>2009-05-29 04:00:51 +0000
commit188cf8d96080f1c5ae37232d1595d5282ee0ff1d (patch)
tree683b11e99d96f0144e4318a2deb023fe180a4982
parent80856c1e34a22c3063b9a0f6fb9c20fe4ebef30e (diff)
downloadopenocd+libswd-188cf8d96080f1c5ae37232d1595d5282ee0ff1d.tar.gz
openocd+libswd-188cf8d96080f1c5ae37232d1595d5282ee0ff1d.tar.bz2
openocd+libswd-188cf8d96080f1c5ae37232d1595d5282ee0ff1d.tar.xz
openocd+libswd-188cf8d96080f1c5ae37232d1595d5282ee0ff1d.zip
Add documentation to flash.h:
- provides low-level information about each flash API interface, - gives driver authors some documentation about the driver interface, - updated extensively from the original patch provided by Duane Ellis. git-svn-id: svn://svn.berlios.de/openocd/trunk@1942 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-rw-r--r--src/flash/flash.h257
1 files changed, 245 insertions, 12 deletions
diff --git a/src/flash/flash.h b/src/flash/flash.h
index 1a98286c..26b3b118 100644
--- a/src/flash/flash.h
+++ b/src/flash/flash.h
@@ -33,65 +33,298 @@ struct image_s;
#define FLASH_MAX_ERROR_STR (128)
+/**
+ * Describes the geometry and status of a single flash sector
+ * within a flash bank. A single bank typically consists of multiple
+ * sectors, each of which can be erased and protected independently.
+ */
typedef struct flash_sector_s
{
+ /// Bus offset from start of the flash chip (in bytes).
u32 offset;
+ /// Number of bytes in this flash sector.
u32 size;
+ /**
+ * Indication of erasure status: 0=not erased, 1=erased,
+ * other=unknown. Set by @c flash_driver_s::erase_check.
+ */
int is_erased;
+ /**
+ * Indication of protection status: 0=unprotected/unlocked,
+ * 1=protected/locked, other=unknown. Set by
+ * @c flash_driver_s::protect_check.
+ */
int is_protected;
} flash_sector_t;
struct flash_bank_s;
+/**
+ * @brief Provides the implementation-independent structure that defines
+ * all of the callbacks required by OpenOCD flash drivers.
+ *
+ * Driver authors must implement the routines defined here, providing an
+ * instance with the fields filled out. After that, the instance must
+ * be registered in flash.c, so it can be used by the driver lookup system.
+ *
+ * Specifically, the user can issue the command: @par
+ * @code
+ * flash bank DRIVERNAME ...parameters...
+ * @endcode
+ *
+ * OpenOCD will search for the driver with a @c flash_driver_s::name
+ * that matches @c DRIVERNAME.
+ *
+ * The flash subsystem calls some of the other drivers routines a using
+ * corresponding static <code>flash_driver_<i>callback</i>()</code>
+ * routine in flash.c.
+ */
typedef struct flash_driver_s
{
+ /**
+ * Gives a human-readable name of this flash driver,
+ * This field is used to select and initialize the driver.
+ */
char *name;
+
+ /**
+ * Registers driver-specific commands. When called (during the
+ * "flash bank" command), the driver may register addition
+ * commands to support new flash chip functions.
+ *
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*register_commands)(struct command_context_s *cmd_ctx);
+
+ /**
+ * Finish the "flash bank" command for @a bank. The
+ * @a bank parameter will have been filled in by the core flash
+ * layer when this routine is called, and the driver can store
+ * additional information in its flash_bank_t::driver_priv field.
+ *
+ * @param cmd_ctx - the command context
+ * @param cmd - the command, in this case 'flash'
+ * @param args - parameters, see below
+ * @param argc - number of parameters on command line
+ * @param bank - new filled in flash bank.
+ *
+ * The args are: @par
+ * @code
+ * args[0] = bank
+ * args[1] = drivername {name above}
+ * args[2] = baseaddress
+ * args[3] = lengthbytes
+ * args[4] = chip_width_in bytes
+ * args[5] = bus_width_bytes
+ * args[6] = driver-specific parameters
+ * @endcode
+ *
+ * For example, args[4] = 16 bit flash, args[5] = 32bit bus.
+ *
+ * If extra arguments are provided (@a argc > 6), they will
+ * start in @a args[6]. These can be used to implement
+ * driver-specific extensions.
+ *
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*flash_bank_command)(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
- /* use flash_driver_erase() wrapper to invoke */
+ /**
+ * Bank/sector erase routine (target-specific). When
+ * called, the flash driver should erase the specified sectors
+ * using whatever means are at its disposal.
+ *
+ * @param bank The bank of flash to be erased.
+ * @param first The number of the first sector to erase, typically 0.
+ * @param last The number of the last sector to erase, typically N-1.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*erase)(struct flash_bank_s *bank, int first, int last);
- /* use flash_driver_protect() wrapper to invoke */
+ /**
+ * Bank/sector protection routine (target-specific).
+ * When called, the driver should disable 'flash write' bits (or
+ * enable 'erase protection' bits) for the given @a bank and @a
+ * sectors.
+ *
+ * @param bank The bank to protect or unprotect.
+ * @param set If non-zero, enable protection; if 0, disable it.
+ * @param first The first sector to (un)protect, typicaly 0.
+ * @param last The last sector to (un)project, typically N-1.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*protect)(struct flash_bank_s *bank, int set, int first, int last);
- /* use the flash_driver_write() wrapper to invoke. */
+ /**
+ * Program data into the flash. Note CPU address will be
+ * "bank->base + offset", while the physical address is
+ * dependent upon current target MMU mappings.
+ *
+ * @param bank The bank to program
+ * @param buffer The data bytes to write.
+ * @param offset The offset into the chip to program.
+ * @param count The number of bytes to write.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*write)(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+ /**
+ * Probe to determine what kind of flash is present.
+ * This is invoked by the "probe" script command.
+ *
+ * @param bank The bank to probe
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*probe)(struct flash_bank_s *bank);
+
+ /**
+ * Check the erasure status of a flash bank.
+ * When called, the driver routine must perform the required
+ * checks and then set the @c flash_sector_s::is_erased field
+ * for each of the flash banks's sectors.
+ *
+ * @param bank The bank to check
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*erase_check)(struct flash_bank_s *bank);
+
+ /**
+ * Determine if the specific bank is "protected" or not.
+ * When called, the driver routine must must perform the
+ * required protection check(s) and then set the @c
+ * flash_sector_s::is_protected field for each of the flash
+ * bank's sectors.
+ *
+ * @param bank - the bank to check
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*protect_check)(struct flash_bank_s *bank);
+
+ /**
+ * Display human-readable information about the flash
+ * bank into the given buffer. Drivers must be careful to avoid
+ * overflowing the buffer.
+ *
+ * @param bank - the bank to get info about
+ * @param char - where to put the text for the human to read
+ * @param buf_size - the size of the human buffer.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*info)(struct flash_bank_s *bank, char *buf, int buf_size);
+
+ /**
+ * A more gentle flavor of filash_driver_s::probe, performing
+ * setup with less noise. Generally, driver routines should test
+ * to seee if the bank has already been probed; if it has, the
+ * driver probably should not perform its probe a second time.
+ *
+ * This callback is often called from the inside of other
+ * routines (e.g. GDB flash downloads) to autoprobe the flash as
+ * it is programing the flash.
+ *
+ * @param bank - the bank to probe
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
int (*auto_probe)(struct flash_bank_s *bank);
} flash_driver_t;
+/**
+ * Provides details of a flash bank, available either on-chip or through
+ * a major interface.
+ *
+ * This structure will be passed as a parameter to the callbacks in the
+ * flash_driver_s structure, some of which may modify the contents of
+ * this structure of the area of flash that it defines. Driver writers
+ * may use the @c driver_priv member to store additional data on a
+ * per-bank basis, if required.
+ */
typedef struct flash_bank_s
{
- struct target_s *target;
- flash_driver_t *driver;
- void *driver_priv;
- int bank_number;
- u32 base;
- u32 size;
- int chip_width;
- int bus_width;
+ struct target_s *target; /**< Target to which this bank belongs. */
+
+ flash_driver_t *driver; /**< Driver for this bank. */
+ void *driver_priv; /**< Private driver storage pointer */
+
+ int bank_number; /**< The 'bank' (or chip number) of this instance. */
+ u32 base; /**< The base address of this bank */
+ u32 size; /**< The size of this chip bank, in bytes */
+
+ int chip_width; /**< Width of the chip in bytes (1,2,4 bytes) */
+ int bus_width; /**< Maximum bus width, in bytes (1,2,4 bytes) */
+
+ /**
+ * The number of sectors on this chip. This value will
+ * be set intially to 0, and the flash driver must set this to
+ * some non-zero value during "probe()" or "auto_probe()".
+ */
int num_sectors;
+ /// Array of sectors, allocated and initilized by the flash driver
flash_sector_t *sectors;
- struct flash_bank_s *next;
+
+ struct flash_bank_s *next; /**< The next flash bank on this chip */
} flash_bank_t;
+/// Registers the 'flash' subsystem commands
extern int flash_register_commands(struct command_context_s *cmd_ctx);
+/// Initializes the 'flash' subsystem drivers
extern int flash_init_drivers(struct command_context_s *cmd_ctx);
+/**
+ * Erases @a length bytes in the @a target flash, starting at @a addr.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
extern int flash_erase_address_range(struct target_s *target, u32 addr, u32 length);
+/**
+ * Writes @a image into the @a target flash. The @a written parameter
+ * will contain the
+ * @param target The target with the flash to be programmed.
+ * @param image The image that will be programmed to flash.
+ * @param written On return, contains the number of bytes written.
+ * @param erase If non-zero, indicates the flash driver should first
+ * erase the corresponding banks or sectors before programming.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
extern int flash_write(struct target_s *target, struct image_s *image, u32 *written, int erase);
+/**
+ * Forces targets to re-examine their erase/protection state.
+ * This routine must be called when the system may modify the status.
+ */
extern void flash_set_dirty(void);
+/// @returns The number of flash banks currently defined.
extern int flash_get_bank_count(void);
+/**
+ * Provides default erased-bank check handling. Checks to see if
+ * the flash driver knows they are erased; if things look uncertain,
+ * this routine will call default_flash_mem_blank_check() to confirm.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
extern int default_flash_blank_check(struct flash_bank_s *bank);
+/**
+ * Provides a default blank flash memory check. Ensures the contents
+ * of the given bank have truly been erased.
+ * @param bank The flash bank.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
extern int default_flash_mem_blank_check(struct flash_bank_s *bank);
+/**
+ * Returns a flash bank by the specified flash_bank_s bank_number, @a num.
+ * @param num The flash bank number.
+ * @returns A flash_bank_t for flash bank @a num, or NULL
+ */
extern flash_bank_t *get_flash_bank_by_num(int num);
+/**
+ * Returns the flash bank like get_flash_bank_by_num(), without probing.
+ * @param num The flash bank number.
+ * @returns A flash_bank_t for flash bank @a num, or NULL.
+ */
extern flash_bank_t *get_flash_bank_by_num_noprobe(int num);
+/**
+ * Returns the flash bank located at a specified address.
+ * @param target The target, presumed to contain one or more banks.
+ * @param addr An address that is within the range of the bank.
+ * @returns The flash_bank_t located at @a addr, or NULL.
+ */
extern flash_bank_t *get_flash_bank_by_addr(struct target_s *target, u32 addr);
#define ERROR_FLASH_BANK_INVALID (-900)