summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTakács Áron <takacs.aron@infracont.hu>2010-09-14 11:15:35 +0200
committerØyvind Harboe <oyvind.harboe@zylin.com>2010-09-14 11:15:35 +0200
commit1b0f194d90f38e363939b7f11260fc64680016e1 (patch)
treed49d7c46da68621a3a3ca044f2795d22a22a29e5
parent35691065f72110d4490df3a127467ea9c04c70ca (diff)
downloadopenocd+libswd-1b0f194d90f38e363939b7f11260fc64680016e1.tar.gz
openocd+libswd-1b0f194d90f38e363939b7f11260fc64680016e1.tar.bz2
openocd+libswd-1b0f194d90f38e363939b7f11260fc64680016e1.tar.xz
openocd+libswd-1b0f194d90f38e363939b7f11260fc64680016e1.zip
board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013
the new Marvell PXA270M processor has a new TAPID: 0x89265013. Attached you will find a patch for target/pxa270.cfg that will handle this. I have also attached a board/colibri.cfg file to support the Colibri PXA270 module by Toradex. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
-rw-r--r--tcl/board/colibri.cfg13
-rw-r--r--tcl/target/pxa270.cfg8
2 files changed, 20 insertions, 1 deletions
diff --git a/tcl/board/colibri.cfg b/tcl/board/colibri.cfg
new file mode 100644
index 00000000..7c1f1cb5
--- /dev/null
+++ b/tcl/board/colibri.cfg
@@ -0,0 +1,13 @@
+# Toradex Colibri PXA270
+source [find target/pxa270.cfg]
+reset_config trst_and_srst srst_push_pull
+adapter_nsrst_assert_width 40
+
+# CS0 -- one bank of CFI flash, 32 MBytes
+# the bank is 32-bits wide, two 16-bit chips in parallel
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME
+
+
+
+
diff --git a/tcl/target/pxa270.cfg b/tcl/target/pxa270.cfg
index 7aaef8c7..f5d2c85f 100644
--- a/tcl/target/pxa270.cfg
+++ b/tcl/target/pxa270.cfg
@@ -27,6 +27,12 @@ if { [info exists CPUTAPID2 ] } {
set _CPUTAPID2 0x79265013
}
+if { [info exists CPUTAPID3 ] } {
+ set _CPUTAPID2 $CPUTAPID3
+} else {
+ # set useful default
+ set _CPUTAPID3 0x89265013
+}
# set adapter_nsrst_delay to the delay introduced by your reset circuit
# the rest of the needed delays are built into the openocd program
@@ -36,7 +42,7 @@ adapter_nsrst_delay 260
jtag_ntrst_delay 250
set _TARGETNAME $_CHIPNAME.cpu
-jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
# maps to PXA internal RAM. If you are using a PXA255