diff options
| author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-06-22 17:32:17 +0000 |
|---|---|---|
| committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-06-22 17:32:17 +0000 |
| commit | 1f28b934ce40e2dc2b2d0e27fffdd68d356eb45a (patch) | |
| tree | af4247b6218825a61fb15bd80f5e4db9a3936754 | |
| parent | 26807d1935165160031de766c80c0e6e84604c9f (diff) | |
| download | openocd+libswd-1f28b934ce40e2dc2b2d0e27fffdd68d356eb45a.tar.gz openocd+libswd-1f28b934ce40e2dc2b2d0e27fffdd68d356eb45a.tar.bz2 openocd+libswd-1f28b934ce40e2dc2b2d0e27fffdd68d356eb45a.tar.xz openocd+libswd-1f28b934ce40e2dc2b2d0e27fffdd68d356eb45a.zip | |
David Brownell <david-b@pacbell.net> Make the Hitex STM32-PerformanceStick board config behave better:
source the STM32 target config instead of using a private clone
git-svn-id: svn://svn.berlios.de/openocd/trunk@2352 b42882b7-edfa-0310-969c-e2dbd0fdcd60
| -rw-r--r-- | tcl/board/hitex_stm32-performancestick.cfg | 47 |
1 files changed, 3 insertions, 44 deletions
diff --git a/tcl/board/hitex_stm32-performancestick.cfg b/tcl/board/hitex_stm32-performancestick.cfg index 5effbd96..509f98a8 100644 --- a/tcl/board/hitex_stm32-performancestick.cfg +++ b/tcl/board/hitex_stm32-performancestick.cfg @@ -1,50 +1,9 @@ # Hitex stm32 performance stick -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32_hitex -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# set jtag speed -jtag_khz 500 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst - -#jtag scan chain -# The CPU -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0008 - # Section 26.6.3 - set _CPUTAPID 0x3ba00477 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -# The boundery scan register, leave the "expected-id" undefined. -jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 +set CHIPNAME stm32_hitex +source [find target/stm32.cfg] # configure str750 connected to jtag chain +# FIXME -- source [find target/str750.cfg] after cleaning that up jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 - -# -flash bank stm32x 0 0 0 0 0 - -# For more information about the configuration files, take a look at: -# openocd.texi |