NEWS: more info

There were a few more changes worth mentioning, including support
for more JTAG adapters, boundary scan improvements, another NAND
driver, and the Win64 stuff.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

1 files changed, 24 insertions, 4 deletions

diff --git a/NEWS b/NEWS
index 436dab7d..2cf5d9f3 100644
--- a/NEWS
+++ b/NEWS
@@ -5,12 +5,22 @@ other issues not mentioned here.
 
 JTAG Layer:
     FT2232H (high speed USB) support doesn't need separate configuration
+    New FT2232H JTAG adapters:  Amontec, Olimex, Signalyzer
     New reset_config options for SRST gating the JTAG clock (or not)
     TAP declaration no longer requires ircapture and mask attributes
-    New "post-reset" event handler for TAP-invariant setup code
+    Scan chain setup should be more robust, with better diagnostics
+    New TAP events:
+	"post-reset" for TAP-invariant setup code (TAPs not usable yet)
+	"setup" for use once TAPs are addressable (e.g. with ICEpick)
     Overridable Tcl "init_reset" and "jtag_init" procedures
+    Simple "autoprobe" mechanism to help simplify server setup
+
+Boundary Scan:
+    SVF bugfixes ... parsing fixes, better STATE switch conformance
+    XSVF bugfixes ... be more correct, handle Xilinx tool output
 
 Target Layer:
+    Warn on use of obsolete numeric target IDs
     New commands for use with Cortex-M3 processors:
 	"cortex_m3 disassemble" ... Thumb2 disassembly (UAL format)
 	"cortex_m3 vector_catch" ... traps certain hardware faults
@@ -18,20 +28,28 @@ Target Layer:
     If you're willing to help debug it
 	VERY EARLY Cortex-A8 and ARMv7A support
 	Updated BeagleBoard.org hardware support
+	you may need to explicitly "reset" after connect-to-Beagle
     New commands for use with XScale processors: "xscale vector_table"
+    ARM
+	bugfixes to single-stepping Thumb code
+	ETM: unavailable registers are not listed
+	ETB, ETM: report actual hardware status
     ARM9
 	name change:  "arm9 vector_catch" not "arm9tdmi vector_catch"
     ARM11
 	single stepping support for i.MX31
 	bugfix for missing "arm11" prefix on "arm11 memwrite ..."
-    ETM support
-	Unavailable registers are not listed
+    GDB support
+	gdb_attach command is gone
 
 Flash Layer:
     The lpc2000 driver handles the new NXP LPC1700 (Cortex-M3) chips
-    New lpc2900 driver for NXP LPC2900 chips (ARM968 based)
+    New drivers:
+	lpc2900, for NXP LPC2900 chips (ARM968 based)
+	mx3_nand, for imx31
     New "last" flag for NOR "flash erase_sector" and "flash protect"
     The "nand erase N" command now erases all of bank N
+    Speed up davinci_nand by about 3x
 
 Board, Target, and Interface Configuration Scripts:
     Amontec JTAGkey2 support
@@ -48,6 +66,8 @@ Documentation:
     Notes on target source code changes that may help debugging
 
 Build and Release:
+    Clean builds on (32-bit) Cygwin
+    Clean builds on 64-bit MinGW
 
 For more details about what has changed since the last release,
 see the ChangeLog associated with this source archive.  For older NEWS,