The target library is now the authorotative source of config examples

git-svn-id: svn://svn.berlios.de/openocd/trunk@642 b42882b7-edfa-0310-969c-e2dbd0fdcd60

8 files changed, 0 insertions, 216 deletions

diff --git a/doc/configs/arm7_ft2232.cfg b/doc/configs/arm7_ft2232.cfg
deleted file mode 100644
index 3dadb0a2..00000000
--- a/doc/configs/arm7_ft2232.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 2
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-target_script 0 reset h2294_init.script
-run_and_halt_time 0 30
-working_area 0 0x40000000 0x40000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
-flash bank cfi 0x80000000 0x400000 2 2 0
diff --git a/doc/configs/arm7_wig.cfg b/doc/configs/arm7_wig.cfg
deleted file mode 100644
index c1e6bf9e..00000000
--- a/doc/configs/arm7_wig.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface parport
-parport_port 0x378
-parport_cable wiggler
-jtag_speed 0
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-target_script 0 reset h2294_init.script
-run_and_halt_time 0 30
-working_area 0 0x40000000 0x40000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
-flash bank cfi 0x80000000 0x400000 2 2 0
diff --git a/doc/configs/arm9_ft2232.cfg b/doc/configs/arm9_ft2232.cfg
deleted file mode 100644
index 732cebab..00000000
--- a/doc/configs/arm9_ft2232.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout "jtagkey"
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 1
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <endianess> <reset mode>
-target arm9tdmi little reset_halt 0 arm920t
-working_area 0 0x200000 0x4000 backup
-run_and_halt_time 0 5000
-
-#flash configuration
-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x10000000 0x800000 2 2 0
-
diff --git a/doc/configs/at91sam7_ecr.cfg b/doc/configs/at91sam7_ecr.cfg
deleted file mode 100644
index 71e26448..00000000
--- a/doc/configs/at91sam7_ecr.cfg
+++ /dev/null
@@ -1,25 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface at91rm9200
-at91rm9200_device rea_ecr
-jtag_speed 0
-reset_config srst_only
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little reset_halt 0 arm7tdmi
-target_script 0 reset at91sam7_ecr.script
-working_area 0 0x00200000 0x2000 nobackup
-
-#flash configuration
-flash bank at91sam7 0 0 0 0 0
diff --git a/doc/configs/chameleon.cfg b/doc/configs/chameleon.cfg
deleted file mode 100644
index 94d581c6..00000000
--- a/doc/configs/chameleon.cfg
+++ /dev/null
@@ -1,12 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface parport
-parport_cable chameleon
-jtag_speed 0
-
-#jtag scan chain
-# format    L IRC  IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 5 0x01 0x1f 0x01
diff --git a/doc/configs/fury_ft2232.cfg b/doc/configs/fury_ft2232.cfg
deleted file mode 100644
index 5aa00892..00000000
--- a/doc/configs/fury_ft2232.cfg
+++ /dev/null
@@ -1,28 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Stellaris Evaluation Board A"
-ft2232_layout evb_lm3s811
-ft2232_vid_pid 0x0403 0xbcd9
-jtag_speed 40
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only separate
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup attach
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target cortex_m3 little run_and_halt 0
-# 4k working area at base of ram
-working_area 0 0x20000800 0x1200 nobackup
-#target_script 0 reset ../doc/scripts/evb_lm3s811_test.script 
-
-#flash configuration
-flash bank stellaris 0 0 0 0 0
diff --git a/doc/configs/usbprog.cfg b/doc/configs/usbprog.cfg
deleted file mode 100644
index fa434dde..00000000
--- a/doc/configs/usbprog.cfg
+++ /dev/null
@@ -1,26 +0,0 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface usbprog
-jtag_speed 2
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-working_area 0 0x40000000 0x40000 nobackup
-
-#flash configuration
-flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
-flash bank cfi 0x80000000 0x400000 2 2 0
diff --git a/doc/configs/xscale_ixp42x.cfg b/doc/configs/xscale_ixp42x.cfg
deleted file mode 100644
index 26cccd5e..00000000
--- a/doc/configs/xscale_ixp42x.cfg
+++ /dev/null
@@ -1,40 +0,0 @@
-#--- Daemon configuration ------------------------
-telnet_port 4444
-gdb_port 3333
-daemon_startup reset
-
-#--- JTAG interface configuration ----------------
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-#-- Reset options available
-reset_config trst_and_srst
-
-#-- jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 7 0x1 0x7f 0x7e
-
-
-#--- Target Configuration ------------------------
-
-#target <type> <endianess> <startup mode> <jtagpos> <variant>
-#target xscale big reset_init 0 IXP42x
-target xscale big reset_halt 0 IXP42x
-
-target_script 0 reset uc7420-rb.ocd
-
-run_and_halt_time 0 2500
-working_area 0 0x00100000 0x00010000 nobackup
-
-flash bank cfi 0x50000000 0x01000000 2 2 0
-flash bank cfi 0x51000000 0x01000000 2 2 0
-
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
-