Rick Altherr <kc8apf@kc8apf.net> retire obsolete syntax

git-svn-id: svn://svn.berlios.de/openocd/trunk@1190 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 28 insertions, 23 deletions

diff --git a/doc/openocd.texi b/doc/openocd.texi
index b436ab72..00932daf 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2057,13 +2057,22 @@ called "flash_banks".
 Certain OpenOCD commands have been deprecated/removed during the various revisions.
 
 @itemize @bullet
-@item @b{load_binary}
-@cindex load_binary
-@*use @option{load_image} command with same args. @xref{load_image}.
-@item @b{target}
-@cindex target
-@*@option{target} no longer take the reset_init, reset_run, run_and_halt, run_and_init. The @option{reset} command
-always does a @option{reset run} when passed no arguments.
+@item @b{arm7_9 fast_writes}
+@cindex arm7_9 fast_writes
+@*use @option{arm7_9 fast_memory_access} command with same args. @xref{arm7_9 fast_memory_access}.
+@item @b{arm7_9 force_hw_bkpts}
+@cindex arm7_9 force_hw_bkpts
+@*Use @option{gdb_breakpoint_override} instead. Note that GDB will use hardware breakpoints
+for flash if the gdb memory map has been set up(default when flash is declared in
+target configuration). @xref{gdb_breakpoint_override}.
+@item @b{arm7_9 sw_bkpts}
+@cindex arm7_9 sw_bkpts
+@*On by default. See also @option{gdb_breakpoint_override}. @xref{gdb_breakpoint_override}.
+@item @b{daemon_startup}
+@cindex daemon_startup
+@*this config option has been removed, simply adding @option{init} and @option{reset halt} to
+the end of your config script will give the same behaviour as using @option{daemon_startup reset}
+and @option{target cortex_m3 little reset_halt 0}.
 @item @b{dump_binary}
 @cindex dump_binary
 @*use @option{dump_image} command with same args. @xref{dump_image}.
@@ -2076,25 +2085,12 @@ always does a @option{reset run} when passed no arguments.
 @item @b{flash write_binary}
 @cindex flash write_binary
 @*use @option{flash write_bank} command with same args. @xref{flash write_bank}.
-@item @b{arm7_9 fast_writes}
-@cindex arm7_9 fast_writes
-@*use @option{arm7_9 fast_memory_access} command with same args. @xref{arm7_9 fast_memory_access}.
 @item @b{flash auto_erase}
 @cindex flash auto_erase
 @*use @option{flash write_image} command passing @option{erase} as the first parameter. @xref{flash write_image}.
-@item @b{daemon_startup}
-@cindex daemon_startup
-@*this config option has been removed, simply adding @option{init} and @option{reset halt} to
-the end of your config script will give the same behaviour as using @option{daemon_startup reset}
-and @option{target cortex_m3 little reset_halt 0}.
-@item @b{arm7_9 sw_bkpts}
-@cindex arm7_9 sw_bkpts
-@*On by default. See also @option{gdb_breakpoint_override}. @xref{gdb_breakpoint_override}.
-@item @b{arm7_9 force_hw_bkpts}
-@cindex arm7_9 force_hw_bkpts
-@*Use @option{gdb_breakpoint_override} instead. Note that GDB will use hardware breakpoints
-for flash if the gdb memory map has been set up(default when flash is declared in
-target configuration). @xref{gdb_breakpoint_override}.
+@item @b{load_binary}
+@cindex load_binary
+@*use @option{load_image} command with same args. @xref{load_image}.
 @item @b{run_and_halt_time}
 @cindex run_and_halt_time
 @*This command has been removed for simpler reset behaviour, it can be simulated with the
@@ -2104,6 +2100,15 @@ reset run
 sleep 100
 halt
 @end smallexample
+@item @b{target} <@var{type}> <@var{endian}> <@var{jtag-position}>
+@cindex target
+@*use the create subcommand of @option{target}.
+@item @b{target_script} <@var{target#}> <@var{eventname}> <@var{scriptname}>
+@cindex target_script
+@*use <@var{target_name}> configure -event <@var{eventname}> "script <@var{scriptname}>"
+@item @b{working_area}
+@cindex working_area
+@*use the @option{configure} subcommand of @option{target} to set the work-area-virt, work-area-phy, work-area-size, and work-area-backup properties of the target.
 @end itemize
 
 @node FAQ