summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorAaron Carroll <aaronc@cse.unsw.edu.au>2011-01-28 17:20:24 +1100
committerØyvind Harboe <oyvind.harboe@zylin.com>2011-01-31 08:46:16 +0100
commit827053c79d4740d65fb92f9ff97a613f292682c8 (patch)
tree1d8962194f3035e4f9fe0727c9278cef852cda82 /doc
parente26bda10bc8bba1721ffddecd41a79acc3586331 (diff)
downloadopenocd+libswd-827053c79d4740d65fb92f9ff97a613f292682c8.tar.gz
openocd+libswd-827053c79d4740d65fb92f9ff97a613f292682c8.tar.bz2
openocd+libswd-827053c79d4740d65fb92f9ff97a613f292682c8.tar.xz
openocd+libswd-827053c79d4740d65fb92f9ff97a613f292682c8.zip
openocd.texi: minor fixes in Reset Configuration
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
Diffstat (limited to 'doc')
-rw-r--r--doc/openocd.texi4
1 files changed, 2 insertions, 2 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 8ee328bd..7772d788 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2633,7 +2633,7 @@ with this signal behave exactly like pressing a RESET button.
@emph{JTAG TAP Reset} ... the @emph{TRST} hardware signal resets
just the TAP controllers connected to the JTAG adapter.
Such resets should not be visible to the rest of the system; resetting a
-device's the TAP controller just puts that controller into a known state.
+device's TAP controller just puts that controller into a known state.
@item
@emph{Emulation Reset} ... many devices can be reset through JTAG
commands. These resets are often distinguishable from system
@@ -2673,7 +2673,7 @@ Use the @command{reset_config} @var{signals} options to say
when either of those signals is not connected.
When SRST is not available, your code might not be able to rely
on controllers having been fully reset during code startup.
-Missing TRST is not a problem, since JTAG level resets can
+Missing TRST is not a problem, since JTAG-level resets can
be triggered using with TMS signaling.
@item @emph{Signals shorted} ... Sometimes a chip, board, or