Fix Luminary FT2232 layout docs/configs

Most of this patch updates documentation and comments for various
Luminary boards, supporting two bug fixes by helping to make sense
of the current mess:

 - Recent rev C lm3s811 eval boards didn't work.  They must use
   the ICDI layout, which sets up some signals that the older
   boards didn't need.  This is actually safe and appropriate
   for *all* recent boards ... so just make "luminary.cfg" use
   the ICDI layout.

 - "luminary-lm3s811.cfg", was previously unusable!  No VID/PID;
   and the wrong vendor string.  Make it work, but reserve it
   for older boards where the ICDI layout is wrong.

 - Default the LM3748 eval board to "luminary.cfg", like the
   other boards.  If someone uses an external JTAG adapter, all
   boards will use the same workaround (override that default).

The difference between the two FT2232 layouts is that eventually
the EVB layout will fail cleanly when asked to enable SWO trace,
but the ICDI layout will as cleanly be able to enable it.  Folk
using "luminary.cfg" with Rev B boards won't see anything going
wrong until SWO support is (someday) added.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

1 files changed, 17 insertions, 5 deletions

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 154ecbca..02caf5b1 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -288,10 +288,17 @@ chips are starting to become available in JTAG adapters.
 @* See: @url{http://www.oocdlink.com} By Joern Kaipf
 @item @b{signalyzer}
 @* See: @url{http://www.signalyzer.com}
-@item @b{evb_lm3s811}
-@* See: @url{http://www.luminarymicro.com} - The Stellaris LM3S811 eval board has an FTD2232C chip built in.
-@item @b{luminary_icdi}
-@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug Interface (ICDI) Board, included in the Stellaris LM3S9B90 and LM3S9B92 Evaluation Kits.
+@item @b{Stellaris Eval Boards}
+@* See: @url{http://www.luminarymicro.com} - The Stellaris eval boards
+bundle FT2232-based JTAG and SWD support, which can be used to debug
+the Stellaris chips.  Using separate JTAG adapters is optional.
+These boards can also be used as JTAG adapters to other target boards,
+disabling the Stellaris chip.
+@item @b{Luminary ICDI}
+@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug
+Interface (ICDI) Boards are included in Stellaris LM3S9B90 and LM3S9B92
+Evaluation Kits.  Like the non-detachable FT2232 support on the other
+Stellaris eval boards, they can be used to debug other target boards.
 @item @b{olimex-jtag}
 @* See: @url{http://www.olimex.com}
 @item @b{flyswatter}
@@ -1962,7 +1969,12 @@ Currently valid layout @var{name} values include:
 @item @b{evb_lm3s811} Luminary Micro EVB_LM3S811 as a JTAG interface,
 either for the local Cortex-M3 (SRST only)
 or in a passthrough mode (neither SRST nor TRST)
-@item @b{luminary_icdi} Luminary In-Circuit Debug Interface (ICDI) Board
+This layout can not support the SWO trace mechanism, and should be
+used only for older boards (before rev C).
+@item @b{luminary_icdi} This layout should be used with most Luminary
+eval boards, including Rev C LM3S811 eval boards and the eponymous
+ICDI boards, to debug either the local Cortex-M3 or in passthrough mode
+to debug some other target.  It can support the SWO trace mechanism.
 @item @b{flyswatter} Tin Can Tools Flyswatter
 @item @b{icebear} ICEbear JTAG adapter from Section 5
 @item @b{jtagkey} Amontec JTAGkey and JTAGkey-Tiny (and compatibles)