- disabled FT2232 debug output (that code should be fairly stable)

- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands
- added lattice ISP cable (experimental)
- properly initialize parallel port (clear tristate bit)
- fixed jtag/Makefile.am that failed with some versions of autotools
- print error number if read() in gdbserver.c failed on Windows
- fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug)
- added support for AT91SAM7SE internal flash


git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60

4 files changed, 21 insertions, 12 deletions

diff --git a/src/jtag/Makefile.am b/src/jtag/Makefile.am
index d4812a46..78230b62 100644
--- a/src/jtag/Makefile.am
+++ b/src/jtag/Makefile.am
@@ -28,14 +28,12 @@ endif
 if FT2232_LIBFTDI
 FT2232FILES = ft2232.c
 else
-FT2232FILES =
-endif
-
 if FT2232_FTD2XX
 FT2232FILES = ft2232.c
 else
 FT2232FILES =
 endif
+endif
 
 if AMTJTAGACCEL
 AMTJTAGACCELFILES = amt_jtagaccel.c
diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c
index 096111bc..386da249 100644
--- a/src/jtag/ft2232.c
+++ b/src/jtag/ft2232.c
@@ -52,13 +52,13 @@
 
 /* enable this to debug io latency
  */
-#if 1
+#if 0
 #define _DEBUG_USB_IO_
 #endif
 
 /* enable this to debug communication
  */
-#if 1
+#if 0
 #define _DEBUG_USB_COMMS_
 #endif
 
diff --git a/src/jtag/jtag.c b/src/jtag/jtag.c
index 259a327d..263eed1a 100644
--- a/src/jtag/jtag.c
+++ b/src/jtag/jtag.c
@@ -714,7 +714,7 @@ int jtag_add_pathmove(int num_states, enum tap_state *path)
 		*last_cmd = cmd_queue_alloc(sizeof(jtag_command_t));
 		last_comand_pointer = &((*last_cmd)->next);
 		(*last_cmd)->next = NULL;
-		(*last_cmd)->type = JTAG_RUNTEST;
+		(*last_cmd)->type = JTAG_PATHMOVE;
 	
 		(*last_cmd)->cmd.pathmove = cmd_queue_alloc(sizeof(pathmove_command_t));
 		(*last_cmd)->cmd.pathmove->num_states = num_states;
diff --git a/src/jtag/parport.c b/src/jtag/parport.c
index c87f98e4..8278bda9 100644
--- a/src/jtag/parport.c
+++ b/src/jtag/parport.c
@@ -98,6 +98,7 @@ cable_t cables[] =
 	{ "chameleon",			0x80, 0x00, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00 },
 	{ "dlc5",				0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10 },
 	{ "triton",				0x80, 0x08, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00 },
+	{ "lattice",			0x40, 0x10, 0x04, 0x02, 0x01, 0x08, 0x00, 0x00, 0x18 },
 	{ NULL,					0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
 };
 
@@ -311,7 +312,7 @@ int parport_init(void)
 	dataport_value = cable->PORT_INIT;
 	
 #if PARPORT_USE_PPDEV == 1
-	if (device_handle>0)
+	if (device_handle > 0)
 	{
 		ERROR("device is already opened");
 		return ERROR_JTAG_INIT_FAILED;
@@ -322,13 +323,14 @@ int parport_init(void)
 
 	snprintf(buffer, 256, "/dev/ppi%d", parport_port);
 	device_handle = open(buffer, O_WRONLY);
-#else
+#else /* not __Free_BSD */
 	DEBUG("opening /dev/parport%d...", parport_port);
 
 	snprintf(buffer, 256, "/dev/parport%d", parport_port);
 	device_handle = open(buffer, O_WRONLY);
-#endif	
-	if (device_handle<0)
+#endif /* __FreeBSD__ */
+
+	if (device_handle < 0)
 	{
 		ERROR("cannot open device. check it exists and that user read and write rights are set");
 		return ERROR_JTAG_INIT_FAILED;
@@ -359,8 +361,9 @@ int parport_init(void)
 		ERROR("cannot set compatible 1284 mode to device");
 		return ERROR_JTAG_INIT_FAILED;
 	}
-#endif
-#else
+#endif /* not __Free_BSD__ */
+
+#else /* not PARPORT_USE_PPDEV */
 	if (parport_port == 0)
 	{
 		parport_port = 0x378;
@@ -381,6 +384,14 @@ int parport_init(void)
 		return ERROR_JTAG_INIT_FAILED;
 	}
 	DEBUG("...privileges granted");
+	
+	/* make sure parallel port is in right mode (clear tristate and interrupt */
+	#ifdef __FreeBSD__
+		outb(parport_port + 2, 0x0);
+	#else
+		outb(0x0, dataport);
+	#endif
+	
 #endif /* PARPORT_USE_PPDEV */
 	
 	parport_reset(0, 0);