Move TCL script files -- Step 1 of 2:

- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
  - Add dist-hook to include such files under src/tcl in the distribution.
  - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
  - Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 0 insertions, 78 deletions

diff --git a/src/target/board/at91rm9200-dk.cfg b/src/target/board/at91rm9200-dk.cfg
deleted file mode 100644
index 900ee351..00000000
--- a/src/target/board/at91rm9200-dk.cfg
+++ /dev/null
@@ -1,78 +0,0 @@
-#
-# This is for the "at91rm9200-DK" (not the EK) eval board.
-#
-# The two are probably very simular.... I have DK...
-#
-# It has atmel at91rm9200 chip.
-source [find target/at91rm9200.cfg]
-$_TARGETNAME configure -event gdb-attach { reset init }
-$_TARGETNAME configure -event reset-init { at91rm9200_dk_init }
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash_bank cfi 0x10000000 0x00200000 2 2 0
-
-
-proc at91rm9200_dk_init { } {
-    # Try to run at 1khz... Yea, that slow!
-    # Chip is really running @ 32khz
-    jtag_khz 8
-    
-    mww 0xfffffc64 0xffffffff
-    ##  disable all clocks but system clock
-    mww 0xfffffc04 0xfffffffe
-    ##  disable all clocks to pioa and piob
-    mww 0xfffffc14 0xffffffc3
-    ##  master clock = slow cpu = slow
-    ##  (means the CPU is running at 32khz!)
-    mww 0xfffffc30 0
-    ##  main osc enable
-    mww 0xfffffc20 0x0000ff01
-    ##  program pllA
-    mww 0xfffffc28 0x20263e04
-    ##  program pllB
-    mww 0xfffffc2c 0x10483e0e
-    ##  let pll settle... sleep 100msec
-    sleep 100
-    ##  switch to fast clock
-    mww 0xfffffc30 0x202
-    ## Sleep some - (go read)
-    sleep 100
-    
-    #========================================
-    # CPU now runs at 180mhz
-    # SYS runs at 60mhz.
-    jtag_khz 40000
-    #========================================
-    
-    
-    ##  set memc for all memories
-    mww 0xffffff60 0x02
-    ##  program smc controller
-    mww 0xffffff70 0x3284
-    ##  init sdram
-    mww 0xffffff98 0x7fffffd0
-    ##  all banks precharge
-    mww 0xffffff80 0x02
-    ##  touch sdram chip to make it work
-    mww 0x20000000 0
-    ##  sdram controller mode register 
-    mww 0xffffff90 0x04
-    mww 0x20000000 0
-    mww 0x20000000 0
-    mww 0x20000000 0
-    mww 0x20000000 0
-    mww 0x20000000 0
-    mww 0x20000000 0
-    mww 0x20000000 0
-    mww 0x20000000 0
-    ##  sdram controller mode register
-    ##  Refresh, etc....
-    mww 0xffffff90 0x03
-    mww 0x20000080 0
-    mww 0xffffff94 0x1f4
-    mww 0x20000080 0
-    mww 0xffffff90 0x10
-    mww 0x20000000 0
-    mww 0xffffff00 0x01
-
-}