diff options
author | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-16 14:57:02 +0000 |
---|---|---|
committer | oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-16 14:57:02 +0000 |
commit | 72f5449e4bfc1d6b656812ddc3fc2a4280333577 (patch) | |
tree | 8f6a38d2d7598253605f3065e8bd5316de79e642 /src/target/board/crossbow_tech_imote2.cfg | |
parent | ea3ddc7e4f0bbd82c6d15210a0699a9941480174 (diff) | |
download | openocd+libswd-72f5449e4bfc1d6b656812ddc3fc2a4280333577.tar.gz openocd+libswd-72f5449e4bfc1d6b656812ddc3fc2a4280333577.tar.bz2 openocd+libswd-72f5449e4bfc1d6b656812ddc3fc2a4280333577.tar.xz openocd+libswd-72f5449e4bfc1d6b656812ddc3fc2a4280333577.zip |
Freddie Chopin <freddie_chopin@op.pl> move files about to where they belong
git-svn-id: svn://svn.berlios.de/openocd/trunk@1798 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/target/board/crossbow_tech_imote2.cfg')
-rw-r--r-- | src/target/board/crossbow_tech_imote2.cfg | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/src/target/board/crossbow_tech_imote2.cfg b/src/target/board/crossbow_tech_imote2.cfg new file mode 100644 index 00000000..8cdd7001 --- /dev/null +++ b/src/target/board/crossbow_tech_imote2.cfg @@ -0,0 +1,46 @@ +# Crossbow Technology iMote2
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME imote2
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # force an error till we get a good number
+ set _CPUTAPID 0xffffffff
+}
+
+# PXA271 and an Intel Strataflash of 32 Megabytes (p30)
+#
+# Marvell/Intel PXA270 Script
+# set jtag_nsrst_delay to the delay introduced by your reset circuit
+# the rest of the needed delays are built into the openocd program
+jtag_nsrst_delay 800
+# set the jtag_ntrst_delay to the delay introduced by a reset circuit
+# the rest of the needed delays are built into the openocd program
+jtag_ntrst_delay 0
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst separate
+#jtag scan chain
+
+jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
+$_TARGETNAME configure -work-area-virt 0x0x5c000000 -work-area-phys 0x0x5c000000 -work-area-size 0x10000 -work-area-backup 1
+# maps to PXA internal RAM. If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# works for P30 flash
+flash bank cfi 0x00000000 0x2000000 2 2 0
|