diff options
| author | ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-18 07:04:58 +0000 |
|---|---|---|
| committer | ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60> | 2009-05-18 07:04:58 +0000 |
| commit | 0958051391d76923ad907dff95f0dd34b2b49b4e (patch) | |
| tree | d1e2570b87eada1567b62e3ac08dc7f7442ca73c /src/target/board/hitex_str9-comstick.cfg | |
| parent | 350f608256d167851a13f6b976c465b54f1056ad (diff) | |
| download | openocd+libswd-0958051391d76923ad907dff95f0dd34b2b49b4e.tar.gz openocd+libswd-0958051391d76923ad907dff95f0dd34b2b49b4e.tar.bz2 openocd+libswd-0958051391d76923ad907dff95f0dd34b2b49b4e.tar.xz openocd+libswd-0958051391d76923ad907dff95f0dd34b2b49b4e.zip | |
- add missing svn props from svn 1798 commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@1808 b42882b7-edfa-0310-969c-e2dbd0fdcd60
Diffstat (limited to 'src/target/board/hitex_str9-comstick.cfg')
| -rw-r--r-- | src/target/board/hitex_str9-comstick.cfg | 144 |
1 files changed, 72 insertions, 72 deletions
diff --git a/src/target/board/hitex_str9-comstick.cfg b/src/target/board/hitex_str9-comstick.cfg index 0974f5ad..de4d56dd 100644 --- a/src/target/board/hitex_str9-comstick.cfg +++ b/src/target/board/hitex_str9-comstick.cfg @@ -1,72 +1,72 @@ -# Hitex STR9-comStick
-# http://www.hitex.com/index.php?id=383
-# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
-
-source [find interface/hitex_str9-comstick.cfg]
-
-# set jtag speed
-jtag_khz 3000
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME str912
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists FLASHTAPID ] } {
- set _FLASHTAPID $FLASHTAPID
-} else {
- set _FLASHTAPID 0x04570041
-}
-jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x25966041
-}
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-if { [info exists BSTAPID ] } {
- set _BSTAPID $BSTAPID
-} else {
- # Found on STR9-comStick, revision STR912CS-A1
- set _BSTAPID1 0x1457f041
- # Found on STR9-comStick, revision STR912CS-A2
- set _BSTAPID2 0x2457f041
-}
-jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
-
-$_TARGETNAME configure -event reset-init {
- # We can increase speed now that we know the target is halted.
- #jtag_rclk 3000
-
- # -- Enable 96K RAM
- # PFQBC enabled / DTCM & AHB wait-states disabled
- mww 0x5C002034 0x0191
-
- str9x flash_config 0 4 2 0 0x80000
- flash protect 0 0 7 off
-}
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
+# Hitex STR9-comStick +# http://www.hitex.com/index.php?id=383 +# This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2. + +source [find interface/hitex_str9-comstick.cfg] + +# set jtag speed +jtag_khz 3000 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME str912 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists FLASHTAPID ] } { + set _FLASHTAPID $FLASHTAPID +} else { + set _FLASHTAPID 0x04570041 +} +jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + set _CPUTAPID 0x25966041 +} +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID + +if { [info exists BSTAPID ] } { + set _BSTAPID $BSTAPID +} else { + # Found on STR9-comStick, revision STR912CS-A1 + set _BSTAPID1 0x1457f041 + # Found on STR9-comStick, revision STR912CS-A2 + set _BSTAPID2 0x2457f041 +} +jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2 + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e + +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + #jtag_rclk 3000 + + # -- Enable 96K RAM + # PFQBC enabled / DTCM & AHB wait-states disabled + mww 0x5C002034 0x0191 + + str9x flash_config 0 4 2 0 0x80000 + flash protect 0 0 7 off +} + +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0 + +#flash bank <driver> <base> <size> <chip_width> <bus_width> +flash bank str9x 0x00000000 0x00080000 0 0 0 +flash bank str9x 0x00080000 0x00008000 0 0 0 |