- add missing svn props from svn 1798 commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1808 b42882b7-edfa-0310-969c-e2dbd0fdcd60

1 files changed, 110 insertions, 110 deletions

diff --git a/src/target/board/zy1000.cfg b/src/target/board/zy1000.cfg
index 1d3eea26..d8bb4650 100644
--- a/src/target/board/zy1000.cfg
+++ b/src/target/board/zy1000.cfg
@@ -1,110 +1,110 @@
-#Script for ZY1000

-

-#Atmel ties SRST & TRST together, at which point it makes

-#no sense to use TRST, but use TMS instead.

-#

-#The annoying thing with tying SRST & TRST together is that

-#there is no way to halt the CPU *before and during* the

-#SRST reset, which means that the CPU will run a number

-#of cycles before it can be halted(as much as milliseconds).

-reset_config srst_only srst_pulls_trst

-

-

-if { [info exists CHIPNAME] } {	

-   set  _CHIPNAME $CHIPNAME    

-} else {	 

-   set  _CHIPNAME zy1000

-}

-

-if { [info exists ENDIAN] } {	

-   set  _ENDIAN $ENDIAN    

-} else {	 

-   set  _ENDIAN little

-}

-

- 

-#jtag scan chain

-if { [info exists CPUTAPID ] } {

-   set _CPUTAPID $CPUTAPID

-} else {

-   set _CPUTAPID 0x1f0f0f0f

-}

-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID

-

-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]

-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4

-

-# at CPU CLK <32kHz this must be disabled

-arm7_9 fast_memory_access enable

-arm7_9 dcc_downloads enable

-

-flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf

-$_TARGETNAME configure -event reset-init { 

-	# Set up chip selects & timings

-	mww 0xFFE00000 0x0100273D

-	mww 0xFFE00004 0x08002125

-	mww 0xFFEe0008 0x02002125

-	mww 0xFFE0000c 0x03002125

-	mww 0xFFE00010 0x40000000

-	mww 0xFFE00014 0x50000000

-	mww 0xFFE00018 0x60000000

-	mww 0xFFE0001c 0x70000000

-	mww 0xFFE00020 0x00000001

-	mww 0xFFE00024 0x00000000

-	

-	# remap  

-	mww 0xFFFFF124 0xFFFFFFFF  

-	mww 0xffff0010 0x100

-	mww 0xffff0034 0x100

-	

-	#disable 16x5x UART interrupts

-	mww 0x08020004 0

-}

-

-# required for usable performance. Used for lots of

-# other things than flash programming.

-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0

-

-jtag_khz 16000

-

-

-proc production_info {} {

-	return "Serial number is official MAC number. Format XXXXXXXXXXXX"

-}

-

-# There is no return value from this procedure. If it is

-# successful it does not throw an exception

-#

-# Progress messages are output via puts 

-proc production {firmwarefile serialnumber} {

-	if {[string length $serialnumber]!=12} {

-		puts "Invalid serial number"

-		return

-	}

-

-	puts "Power cycling target"

-	power off

-	sleep 3000

-	power on

-	sleep 1000

-	reset init

-	flash write_image erase $firmwarefile 0x1000000 bin

-	verify_image $firmwarefile 0x1000000 bin

-

-	# Big endian... weee!!!!

-	puts "Setting MAC number to $serialnumber"	

-	flash fillw [expr 0x1030000-0x8] "0x[string range $serialnumber 2 3][string range $serialnumber 0 1]0000" 1

-	flash fillw [expr 0x1030000-0x4] "0x[string range $serialnumber 10 11][string range $serialnumber 8 9][string range $serialnumber 6 7][string range $serialnumber 4 5]" 1

-	puts "Production successful"

-} 

-

-

-proc production_test {} {

-	power on

-	sleep 1000

-	target_request debugmsgs enable

-	reset run

-	sleep 25000

-	target_request debugmsgs disable

-	return "See IP address above..."

-}

+#Script for ZY1000
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+reset_config srst_only srst_pulls_trst
+
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME zy1000
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+ 
+#jtag scan chain
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x1f0f0f0f
+}
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+# at CPU CLK <32kHz this must be disabled
+arm7_9 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
+$_TARGETNAME configure -event reset-init { 
+	# Set up chip selects & timings
+	mww 0xFFE00000 0x0100273D
+	mww 0xFFE00004 0x08002125
+	mww 0xFFEe0008 0x02002125
+	mww 0xFFE0000c 0x03002125
+	mww 0xFFE00010 0x40000000
+	mww 0xFFE00014 0x50000000
+	mww 0xFFE00018 0x60000000
+	mww 0xFFE0001c 0x70000000
+	mww 0xFFE00020 0x00000001
+	mww 0xFFE00024 0x00000000
+	
+	# remap  
+	mww 0xFFFFF124 0xFFFFFFFF  
+	mww 0xffff0010 0x100
+	mww 0xffff0034 0x100
+	
+	#disable 16x5x UART interrupts
+	mww 0x08020004 0
+}
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
+
+jtag_khz 16000
+
+
+proc production_info {} {
+	return "Serial number is official MAC number. Format XXXXXXXXXXXX"
+}
+
+# There is no return value from this procedure. If it is
+# successful it does not throw an exception
+#
+# Progress messages are output via puts 
+proc production {firmwarefile serialnumber} {
+	if {[string length $serialnumber]!=12} {
+		puts "Invalid serial number"
+		return
+	}
+
+	puts "Power cycling target"
+	power off
+	sleep 3000
+	power on
+	sleep 1000
+	reset init
+	flash write_image erase $firmwarefile 0x1000000 bin
+	verify_image $firmwarefile 0x1000000 bin
+
+	# Big endian... weee!!!!
+	puts "Setting MAC number to $serialnumber"	
+	flash fillw [expr 0x1030000-0x8] "0x[string range $serialnumber 2 3][string range $serialnumber 0 1]0000" 1
+	flash fillw [expr 0x1030000-0x4] "0x[string range $serialnumber 10 11][string range $serialnumber 8 9][string range $serialnumber 6 7][string range $serialnumber 4 5]" 1
+	puts "Production successful"
+} 
+
+
+proc production_test {} {
+	power on
+	sleep 1000
+	target_request debugmsgs enable
+	reset run
+	sleep 25000
+	target_request debugmsgs disable
+	return "See IP address above..."
+}