Rick Altherr <kc8apf@kc8apf.net> switch to new syntax for target events

git-svn-id: svn://svn.berlios.de/openocd/trunk@1116 b42882b7-edfa-0310-969c-e2dbd0fdcd60

12 files changed, 0 insertions, 412 deletions

diff --git a/src/target/event/at91r40008_reset.script b/src/target/event/at91r40008_reset.script
deleted file mode 100644
index 4cda1c58..00000000
--- a/src/target/event/at91r40008_reset.script
+++ /dev/null
@@ -1,7 +0,0 @@
-wait_halt
-sleep 10
-poll
-# Ethernut 3 remapping is required to access external flash memory.
-mww 0xffe00000 0x1000213d
-mww 0xffe00004 0x20003e3d
-mww 0xffe00020 0x00000001
diff --git a/src/target/event/at91sam9260_reset.script b/src/target/event/at91sam9260_reset.script
deleted file mode 100644
index 022b4615..00000000
--- a/src/target/event/at91sam9260_reset.script
+++ /dev/null
@@ -1,58 +0,0 @@
-mww 0xfffffd08 0xa5000501         # RSTC_MR : enable user reset
-mww 0xfffffd44 0x00008000         # WDT_MR : disable watchdog
-
-mww 0xfffffc20 0x00004001         # CKGR_MOR : enable the main oscillator
-sleep 20                          # wait 20 ms
-mww 0xfffffc30 0x00000001         # PMC_MCKR : switch to main oscillator
-sleep 10                          # wait 10 ms
-mww 0xfffffc28 0x2060bf09         # CKGR_PLLAR: Set PLLA Register for 198,656MHz
-sleep 20                          # wait 20 ms
-mww 0xfffffc30 0x00000101         # PMC_MCKR : Select prescaler
-sleep 10                          # wait 10 ms
-mww 0xfffffc30 0x00000102         # PMC_MCKR : Clock from PLLA is selected
-sleep 10                          # wait 10 ms
-
-jtag_speed 0                      # Increase JTAG Speed to 6 MHz
-arm7_9 dcc_downloads enable       # Enable faster DCC downloads
-
-mww 0xffffec00 0x01020102         # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
-mww 0xffffec04 0x09070806         # SMC_PULSE0
-mww 0xffffec08 0x000d000b         # SMC_CYCLE0
-mww 0xffffec0c 0x00001003         # SMC_MODE0
-
-flash probe 0                     # Identify flash bank 0
-
-mww 0xfffff870 0xffff0000         # PIO_ASR : Select peripheral function for D15..D31
-mww 0xfffff804 0xffff0000         # PIO_PDR : Disable PIO function for D15..D31
-
-mww 0xffffef1c 0x2                # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
-
-#mww 0xffffea08 0x85227259         # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
-mww 0xffffea08 0x85227254         # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks)
-
-mww 0xffffea00 0x1                # SDRAMC_MR : issue a NOP command
-mww 0x20000000 0
-mww 0xffffea00 0x2                # SDRAMC_MR : issue an 'All Banks Precharge' command
-mww 0x20000000 0
-mww 0xffffea00 0x4                # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x3                # SDRAMC_MR : issue a 'Load Mode Register' command
-mww 0x20000000 0
-mww 0xffffea00 0x0                # SDRAMC_MR : normal mode
-mww 0x20000000 0
-mww 0xffffea04 0x5d2              # SDRAMC_TR : Set refresh timer count to 15us
-
diff --git a/src/target/event/eir-sam7se512_reset.script b/src/target/event/eir-sam7se512_reset.script
deleted file mode 100644
index 8a78532a..00000000
--- a/src/target/event/eir-sam7se512_reset.script
+++ /dev/null
@@ -1,87 +0,0 @@
-# WDT_MR, disable watchdog 
-mww 0xFFFFFD44 0x00008000
-
-# RSTC_MR, enable user reset
-mww 0xfffffd08 0xa5000001
-
-# CKGR_MOR
-mww 0xFFFFFC20 0x00000601
-sleep 10
-
-# CKGR_PLLR
-mww 0xFFFFFC2C 0x00481c0e
-sleep 10
-
-# PMC_MCKR
-mww 0xFFFFFC30 0x00000007
-sleep 10
-
-# PMC_IER
-mww 0xFFFFFF60 0x00480100
-
-#
-# Enable SDRAM interface.
-#
-
-# Enable SDRAM control at PIO A.
-mww 0xfffff474 0x3f800000 # PIO_BSR_OFF
-mww 0xfffff404 0x3f800000 # PIO_PDR_OFF
-
-# Enable address bus (A0, A2-A11, A13-A17) at PIO B
-mww 0xfffff674 0x0003effd # PIO_BSR_OFF
-mww 0xfffff604 0x0003effd # PIO_PDR_OFF
-
-# Enable 16 bit data bus at PIO C
-mww 0xfffff870 0x0000ffff # PIO_ASR_OFF
-mww 0xfffff804 0x0000ffff # PIO_PDR_OFF
-
-# Enable SDRAM chip select
-mww 0xffffff80 0x00000002 # EBI_CSA_OFF
-
-# Set SDRAM characteristics in configuration register.
-# Hard coded values for MT48LC32M16A2 with 48MHz CPU.
-mww 0xffffffb8 0x2192215a # SDRAMC_CR_OFF
-sleep 10
-
-# Issue 16 bit SDRAM command: NOP
-mww 0xffffffb0 0x00000011 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-
-# Issue 16 bit SDRAM command: Precharge all
-mww 0xffffffb0 0x00000012 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-
-# Issue 8 auto-refresh cycles
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-mww 0xffffffb0 0x00000014 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000000 
-
-# Issue 16 bit SDRAM command: Set mode register  
-mww 0xffffffb0 0x00000013 # SDRAMC_MR_OFF
-mww 0x20000014 0xcafedede
-
-# Set refresh rate count ???
-mww 0xffffffb4 0x00000013 # SDRAMC_TR_OFF
-
-# Issue 16 bit SDRAM command: Normal mode
-mww 0xffffffb0 0x00000010 # SDRAMC_MR_OFF
-mww 0x20000000 0x00000180
-
-#
-# Enable external reset key.
-#
-mww 0xfffffd08 0xa5000001
-
diff --git a/src/target/event/hammer_reset.script b/src/target/event/hammer_reset.script
deleted file mode 100644
index c7e38e6c..00000000
--- a/src/target/event/hammer_reset.script
+++ /dev/null
@@ -1,24 +0,0 @@
-# Reset Script for the TinCanTools S3C2410 Based Hammer Module
-# http://www.tincantools.com
-#
-# Setup primary clocks and initialize the SDRAM
-mww 0x53000000 0x00000000
-mww 0x4a000008 0xffffffff
-mww 0x4a00000c 0x000007ff
-mww 0x4c000000 0x00ffffff
-mww 0x4c000014 0x00000003
-mww 0x4c000004 0x000a1031
-mww 0x48000000 0x11111122
-mww 0x48000004 0x00000700
-mww 0x48000008 0x00000700
-mww 0x4800000c 0x00000700
-mww 0x48000010 0x00000700
-mww 0x48000014 0x00000700
-mww 0x48000018 0x00000700
-mww 0x4800001c 0x00018005
-mww 0x48000020 0x00018005
-mww 0x48000024 0x009c0459
-mww 0x48000028 0x000000b2
-mww 0x4800002c 0x00000030
-mww 0x48000030 0x00000030
-flash probe 0
diff --git a/src/target/event/omap5912_reset.script b/src/target/event/omap5912_reset.script
deleted file mode 100644
index 258c6bd4..00000000
--- a/src/target/event/omap5912_reset.script
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# halt target
-#
-poll
-sleep 1
-halt
-wait_halt
-#
-# disable wdt
-#
-mww 0xfffec808 0x000000f5
-mww 0xfffec808 0x000000a0
-
-mww 0xfffeb048 0x0000aaaa
-sleep 500
-mww 0xfffeb048 0x00005555
-sleep 500
-#
-# detect flash
-#
-flash probe 0
diff --git a/src/target/event/pxa255_reset.script b/src/target/event/pxa255_reset.script
deleted file mode 100644
index bc9fa822..00000000
--- a/src/target/event/pxa255_reset.script
+++ /dev/null
@@ -1,74 +0,0 @@
-#configuration file for PXA250 Evaluation Board
-# -----------------------------------------------------
-#
-xscale cp15   15      0x00002001  #Enable CP0 and CP13 access
-#
-# setup GPIO
-#
-mww    0x40E00018  0x00008000  #CPSR0
-sleep   20
-mww    0x40E0001C  0x00000002  #GPSR1
-sleep   20
-mww    0x40E00020  0x00000008  #GPSR2
-sleep   20
-mww    0x40E0000C  0x00008000  #GPDR0
-sleep   20
-mww    0x40E00054  0x80000000  #GAFR0_L
-sleep   20
-mww    0x40E00058  0x00188010  #GAFR0_H
-sleep   20
-mww    0x40E0005C  0x60908018  #GAFR1_L
-sleep   20
-mww    0x40E0000C  0x0280E000  #GPDR0
-sleep   20
-mww    0x40E00010  0x821C88B2  #GPDR1
-sleep   20
-mww    0x40E00014  0x000F03DB  #GPDR2
-sleep   20
-mww    0x40E00000  0x000F03DB  #GPLR0
-sleep   20
-
-
-mww    0x40F00004  0x00000020  #PSSR
-sleep   20
-
-#
-# setup memory controller
-#
-mww    0x48000008  0x01111998  #MSC0
-sleep   20
-mww    0x48000010  0x00047ff0  #MSC2
-sleep   20
-mww    0x48000014  0x00000000  #MECR
-sleep   20
-mww    0x48000028  0x00010504  #MCMEM0
-sleep   20
-mww    0x4800002C  0x00010504  #MCMEM1
-sleep   20
-mww    0x48000030  0x00010504  #MCATT0
-sleep   20
-mww    0x48000034  0x00010504  #MCATT1
-sleep   20
-mww    0x48000038  0x00004715  #MCIO0
-sleep   20
-mww    0x4800003C  0x00004715  #MCIO1
-sleep   20
-#
-mww    0x48000004  0x03CA4018  #MDREF
-sleep   20
-mww    0x48000004  0x004B4018  #MDREF
-sleep   20
-mww    0x48000004  0x000B4018  #MDREF
-sleep   20
-mww    0x48000004  0x000BC018  #MDREF
-sleep   20
-mww    0x48000000  0x00001AC8  #MDCNFG
-sleep   20
-
-sleep   20
-
-mww    0x48000000  0x00001AC9  #MDCNFG
-sleep   20
-mww    0x48000040  0x00000000  #MDMRS
-sleep   20
-
diff --git a/src/target/event/sam7x256_reset.script b/src/target/event/sam7x256_reset.script
deleted file mode 100644
index 1612366c..00000000
--- a/src/target/event/sam7x256_reset.script
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Init - taken form the script openocd_at91sam7_ecr.script 
-#
-# I take this script from the following page:
-#
-# http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html
-#
-# disable watchdog
-mww 0xfffffd44 0x00008000	
-# enable user reset
-mww 0xfffffd08 0xa5000001	
-# CKGR_MOR : enable the main oscillator
-mww 0xfffffc20 0x00000601	
-sleep 10
-# CKGR_PLLR: 96.1097 MHz
-mww 0xfffffc2c 0x00481c0e 	
-sleep 10
-# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
-mww 0xfffffc30 0x00000007	
-sleep 10
-# MC_FMR: flash mode (FWS=1,FMCN=60)
-mww 0xffffff60 0x003c0100	
-sleep 100
diff --git a/src/target/event/str710_program.script b/src/target/event/str710_program.script
deleted file mode 100644
index e5b56f7b..00000000
--- a/src/target/event/str710_program.script
+++ /dev/null
@@ -1,2 +0,0 @@
-flash protect 0 0 7 off
-flash protect 1 0 1 off
diff --git a/src/target/event/str730_program.script b/src/target/event/str730_program.script
deleted file mode 100644
index b1601b84..00000000
--- a/src/target/event/str730_program.script
+++ /dev/null
@@ -1 +0,0 @@
-flash protect 0 0 7 off
diff --git a/src/target/event/str750_program.script b/src/target/event/str750_program.script
deleted file mode 100644
index e5b56f7b..00000000
--- a/src/target/event/str750_program.script
+++ /dev/null
@@ -1,2 +0,0 @@
-flash protect 0 0 7 off
-flash protect 1 0 1 off
diff --git a/src/target/event/wi-9c_reset.script b/src/target/event/wi-9c_reset.script
deleted file mode 100644
index b648106c..00000000
--- a/src/target/event/wi-9c_reset.script
+++ /dev/null
@@ -1,70 +0,0 @@
-mww 0x90600104 0x33313333
-mww 0xA0700000 0x00000001  # Enable the memory controller.
-mww 0xA0700024 0x00000006  # Set the refresh counter 6
-mww 0xA0700028 0x00000001  # 
-mww 0xA0700030 0x00000001  # Set the precharge period
-mww 0xA0700034 0x00000004  # Active to precharge command period is 16 clock cycles
-mww 0xA070003C 0x00000001  # tAPR
-mww 0xA0700040 0x00000005  # tDAL
-mww 0xA0700044 0x00000001  # tWR
-mww 0xA0700048 0x00000006  # tRC 32 clock cycles  
-mww 0xA070004C 0x00000006  # tRFC 32 clock cycles
-mww 0xA0700054 0x00000001  # tRRD
-mww 0xA0700058 0x00000001  # tMRD
-mww 0xA0700100 0x00004280  # Dynamic Config 0 (cs4) 
-mww 0xA0700120 0x00004280  # Dynamic Config 1 (cs5)
-mww 0xA0700140 0x00004280  # Dynamic Config 2 (cs6)
-mww 0xA0700160 0x00004280  # Dynamic Config 3 (cs7)
-#
-mww 0xA0700104 0x00000203  # CAS latency is 2 at 100 MHz
-mww 0xA0700124 0x00000203  # CAS latency is 2 at 100 MHz
-mww 0xA0700144 0x00000203  # CAS latency is 2 at 100 MHz
-mww 0xA0700164 0x00000203  # CAS latency is 2 at 100 MHz
-#
-mww 0xA0700020 0x00000103  # issue SDRAM PALL command
-#
-mww 0xA0700024 0x00000001  # Set the refresh counter to be as small as possible
-#
-# Add some dummy writes to give the SDRAM time to settle, it needs two
-# AHB clock cycles, here we poke in the debugger flag, this lets
-# the software know that we are in the debugger
-mww 0xA0900000 0x00000002
-mww 0xA0900000 0x00000002
-mww 0xA0900000 0x00000002
-mww 0xA0900000 0x00000002
-mww 0xA0900000 0x00000002
-#
-mdw 0xA0900000 
-mdw 0xA0900000 
-mdw 0xA0900000 
-mdw 0xA0900000 
-mdw 0xA0900000 
-#
-mww 0xA0700024 0x00000030 # Set the refresh counter to 30
-mww 0xA0700020 0x00000083 # Issue SDRAM MODE command
-#
-# Next we perform a read of RAM.
-# mw = move word.
-mdw 0x00022000
-# mw 0x00022000:P, r3  # 22000 for cas2 latency, 32000 for cas 3
-#
-mww 0xA0700020 0x00000003   # issue SDRAM NORMAL command
-mww 0xA0700100 0x00084280   # Enable buffer access
-mww 0xA0700120 0x00084280   # Enable buffer access
-mww 0xA0700140 0x00084280   # Enable buffer access
-mww 0xA0700160 0x00084280   # Enable buffer access
-
-#Set byte lane state (static mem 1)"
-mww 0xA0700220, 0x00000082
-#Flash Start
-mww 0xA09001F8, 0x50000000
-#Flash Mask Reg
-mww 0xA09001FC, 0xFF000001
-mww 0xA0700028, 0x00000001
-
-#  RAMAddr = 0x00020000
-#  RAMSize = 0x00004000
-
-# Set the processor mode
-reg cpsr 0xd3
-
diff --git a/src/target/event/xba_revA3.script b/src/target/event/xba_revA3.script
deleted file mode 100644
index e58185e2..00000000
--- a/src/target/event/xba_revA3.script
+++ /dev/null
@@ -1,43 +0,0 @@
-#Written by: Michael Schwingen <rincewind@discworld.dascon.de>
-#############################################################################
-# setup expansion bus CS, disable external wdt
-#############################################################################
-mww 0xc4000000  0xbd113842  #CS0  : Flash, write enabled @0x50000000
-mww 0xc4000004  0x94d10013  #CS1
-mww 0xc4000008  0x95960003  #CS2
-mww 0xc400000c  0x00000000  #CS3
-mww 0xc4000010  0x80900003  #CS4
-mww 0xc4000014  0x9d520003  #CS5
-mww 0xc4000018  0x81860001  #CS6
-mww 0xc400001c  0x80900003  #CS7
-
-#############################################################################
-# init SDRAM controller: 16MB, one bank, CL3
-#############################################################################
-mww 0xCC000000  0x2A # SDRAM_CFG: 64MBit, CL3
-mww 0xCC000004     0 # disable refresh
-mww 0xCC000008     3 # NOP
-sleep 100
-mww 0xCC000004  2100 # set refresh counter
-mww 0xCC000008     2 # Precharge All Banks
-sleep 100
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     4 # Auto Refresh
-mww 0xCC000008     1 # Mode Select CL3
-
-#mww 0xc4000020  0xffffee # CFG0: remove expansion bus boot flash
-#mirror at 0x00000000
-
-#big endian
-reg XSCALE_CTRL 0xF8
-
-#
-# detect flash
-#
-flash probe 0