Charles Hardin <ckhardin@gmail.com> and Øyvind Harboe

This patch just uses the command.c interface to create tcl commands for the root level commands and avoids a bit of the "TCL" bleed into the rest of the openocd code.

Multilevel commands also supported.


git-svn-id: svn://svn.berlios.de/openocd/trunk@818 b42882b7-edfa-0310-969c-e2dbd0fdcd60

2 files changed, 1 insertions, 56 deletions

diff --git a/src/target/Makefile.am b/src/target/Makefile.am
index 0fb463ae..d8c66c63 100644
--- a/src/target/Makefile.am
+++ b/src/target/Makefile.am
@@ -34,6 +34,6 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
 	interface/calao-usb-a9260.cfg target/at91sam9260minimal.cfg  event/lpc2148_reset.script \
 	interface/chameleon.cfg interface/at91rm9200.cfg interface/jlink.cfg interface/arm-usb-ocd.cfg \
 	interface/signalyzer.cfg event/eir-sam7se512_reset.script target/eir-sam7se512.cfg \
-	event/hammer_reset.script interface/flyswatter.cfg target/hammer.cfg target/mx31.cfg target/at91eb40a.tcl \
+	event/hammer_reset.script interface/flyswatter.cfg target/hammer.cfg target/mx31.cfg  \
 	event/str730_program.script event/str750_program.script
 
diff --git a/src/target/target/at91eb40a.tcl b/src/target/target/at91eb40a.tcl
deleted file mode 100644
index de57995c..00000000
--- a/src/target/target/at91eb40a.tcl
+++ /dev/null
@@ -1,55 +0,0 @@
-#Script for AT91EB40a
-
-#Atmel ties SRST & TRST together, at which point it makes
-#no sense to use TRST, but use TMS instead.
-#
-#The annoying thing with tying SRST & TRST together is that
-#there is no way to halt the CPU *before and during* the
-#SRST reset, which means that the CPU will run a number
-#of cycles before it can be halted(as much as milliseconds).
-openocd {reset_config srst_only srst_pulls_trst}
- 
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-openocd {jtag_device 4 0x1 0xf 0xe}
-
-#target configuration
-openocd {target arm7tdmi little 0 arm7tdmi-s_r4}
-
-# speed up memory downloads
-openocd {arm7 fast_memory_access enable}
-openocd {arm7_9 dcc_downloads enable}
-
-#flash driver
-openocd {flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf}
-
-# required for usable performance. Used for lots of
-# other things than flash programming.
-openocd {working_area 0 0x00000000 0x20000 nobackup}
-
-#force hardware values - we're running out of flash more
-#often than not. The user can disable this in his
-#subsequent config script.
-openocd {arm7_9 force_hw_bkpts enable}
-
-set reset_count 0
-
-proc target_reset_0 {} {
-	global reset_count
-	# Reset script for AT91EB40a
-	openocd {reg cpsr 0x000000D3} 		
-	openocd {mww 0xFFE00020 0x1}
-	openocd {mww 0xFFE00024 0x00000000}  
-	openocd {mww 0xFFE00000 0x01002539} 
-	openocd {mww 0xFFFFF124 0xFFFFFFFF}  
-	openocd {mww 0xffff0010 0x100}
-	openocd {mww 0xffff0034 0x100}
-	set reset_count [expr $reset_count+1]
-	echo "Testing reset $reset_count !"
-}
-
-proc target_pre_reset_0 {} {
-	global reset_count
-	set reset_count [expr $reset_count+1]
-	echo "Testing pre_reset $reset_count !"
-}