- fix at91rm9200 warning. Thanks Zach Welch <zw@superlucidity.net>

- add missing svn props from previous commit

git-svn-id: svn://svn.berlios.de/openocd/trunk@1478 b42882b7-edfa-0310-969c-e2dbd0fdcd60

2 files changed, 87 insertions, 87 deletions

diff --git a/src/target/target/lpc2124.cfg b/src/target/target/lpc2124.cfg
index f8d7e8f6..c780664d 100644
--- a/src/target/target/lpc2124.cfg
+++ b/src/target/target/lpc2124.cfg
@@ -1,38 +1,38 @@
-#LPC-2124 CPU

-

-if { [info exists CHIPNAME] } {

-   set  _CHIPNAME $CHIPNAME

-} else {

-   set  _CHIPNAME lpc2124

-}

-

-if { [info exists ENDIAN] } {

-   set  _ENDIAN $ENDIAN

-} else {

-   set  _ENDIAN little

-}

-

-if { [info exists CPUTAPID ] } {

-   set _CPUTAPID $CPUTAPID

-} else {

-  # force an error till we get a good number

-    set _CPUTAPID 0x4f1f0f0f

-}

-

-

-#use combined on interfaces or targets that can't set TRST/SRST separately

-reset_config trst_and_srst srst_pulls_trst

-jtag_nsrst_delay 10

-jtag_khz 1000

-

-#jtag scan chain

-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID

-

-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]

-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4

-

-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0

-

-

-#flash bank <driver> <base> <size> <chip_width> <bus_width>

-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum

+#LPC-2124 CPU
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME lpc2124
+}
+
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+    set _CPUTAPID 0x4f1f0f0f
+}
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+jtag_nsrst_delay 10
+jtag_khz 1000
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum
diff --git a/src/target/target/lpc2378.cfg b/src/target/target/lpc2378.cfg
index 386fae07..16232383 100644
--- a/src/target/target/lpc2378.cfg
+++ b/src/target/target/lpc2378.cfg
@@ -1,49 +1,49 @@
-# NXP LPC2378 ARM7TDMI-S with 512kB Flash and 32kB Local On-Chip SRAM (58kB total), clocked with 4MHz internal RC oscillator

-

-if { [info exists CHIPNAME] } {

-	set  _CHIPNAME $CHIPNAME

-} else {

-	set  _CHIPNAME lpc2378

-}

-

-if { [info exists ENDIAN] } {

-	set  _ENDIAN $ENDIAN

-} else {

-	set  _ENDIAN little

-}

-

-if { [info exists CPUTAPID ] } {

-	set _CPUTAPID $CPUTAPID

-} else {

-	set _CPUTAPID 0x4f1f0f0f

-}

-

-#delays on reset lines

-jtag_nsrst_delay 200

-jtag_ntrst_delay 200

-

-# LPC2000 -> SRST causes TRST

-reset_config trst_and_srst srst_pulls_trst

-

-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID

-

-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]

-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4

-

-# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)

-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0

-

-$_TARGETNAME configure -event reset-init {

-	# Force target into ARM state

-	soft_reset_halt

-	#do not remap 0x0000-0x0020 to anything but the flash

-	mwb 0xE01FC040 0x01

-}

-

-# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.

-# After reset the chip uses its internal 4MHz RC oscillator

-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>

-flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum

-

-# 4MHz / 6 = 666kHz, so use 500

-jtag_khz 500

+# NXP LPC2378 ARM7TDMI-S with 512kB Flash and 32kB Local On-Chip SRAM (58kB total), clocked with 4MHz internal RC oscillator
+
+if { [info exists CHIPNAME] } {
+	set  _CHIPNAME $CHIPNAME
+} else {
+	set  _CHIPNAME lpc2378
+}
+
+if { [info exists ENDIAN] } {
+	set  _ENDIAN $ENDIAN
+} else {
+	set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+	set _CPUTAPID $CPUTAPID
+} else {
+	set _CPUTAPID 0x4f1f0f0f
+}
+
+#delays on reset lines
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+# LPC2000 -> SRST causes TRST
+reset_config trst_and_srst srst_pulls_trst
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0
+
+$_TARGETNAME configure -event reset-init {
+	# Force target into ARM state
+	soft_reset_halt
+	#do not remap 0x0000-0x0020 to anything but the flash
+	mwb 0xE01FC040 0x01
+}
+
+# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
+# After reset the chip uses its internal 4MHz RC oscillator
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum
+
+# 4MHz / 6 = 666kHz, so use 500
+jtag_khz 500