- added svn props for newly added files

git-svn-id: svn://svn.berlios.de/openocd/trunk@734 b42882b7-edfa-0310-969c-e2dbd0fdcd60

3 files changed, 61 insertions, 61 deletions

diff --git a/src/target/event/hammer_reset.script b/src/target/event/hammer_reset.script
index ae73074a..c7e38e6c 100644
--- a/src/target/event/hammer_reset.script
+++ b/src/target/event/hammer_reset.script
@@ -1,24 +1,24 @@
-# Reset Script for the TinCanTools S3C2410 Based Hammer Module

-# http://www.tincantools.com

-#

-# Setup primary clocks and initialize the SDRAM

-mww 0x53000000 0x00000000

-mww 0x4a000008 0xffffffff

-mww 0x4a00000c 0x000007ff

-mww 0x4c000000 0x00ffffff

-mww 0x4c000014 0x00000003

-mww 0x4c000004 0x000a1031

-mww 0x48000000 0x11111122

-mww 0x48000004 0x00000700

-mww 0x48000008 0x00000700

-mww 0x4800000c 0x00000700

-mww 0x48000010 0x00000700

-mww 0x48000014 0x00000700

-mww 0x48000018 0x00000700

-mww 0x4800001c 0x00018005

-mww 0x48000020 0x00018005

-mww 0x48000024 0x009c0459

-mww 0x48000028 0x000000b2

-mww 0x4800002c 0x00000030

-mww 0x48000030 0x00000030

-flash probe 0

+# Reset Script for the TinCanTools S3C2410 Based Hammer Module
+# http://www.tincantools.com
+#
+# Setup primary clocks and initialize the SDRAM
+mww 0x53000000 0x00000000
+mww 0x4a000008 0xffffffff
+mww 0x4a00000c 0x000007ff
+mww 0x4c000000 0x00ffffff
+mww 0x4c000014 0x00000003
+mww 0x4c000004 0x000a1031
+mww 0x48000000 0x11111122
+mww 0x48000004 0x00000700
+mww 0x48000008 0x00000700
+mww 0x4800000c 0x00000700
+mww 0x48000010 0x00000700
+mww 0x48000014 0x00000700
+mww 0x48000018 0x00000700
+mww 0x4800001c 0x00018005
+mww 0x48000020 0x00018005
+mww 0x48000024 0x009c0459
+mww 0x48000028 0x000000b2
+mww 0x4800002c 0x00000030
+mww 0x48000030 0x00000030
+flash probe 0
diff --git a/src/target/interface/flyswatter.cfg b/src/target/interface/flyswatter.cfg
index 83f5a64b..f806981a 100644
--- a/src/target/interface/flyswatter.cfg
+++ b/src/target/interface/flyswatter.cfg
@@ -1,9 +1,9 @@
-# Interface Configuration for the TinCanTools FT2232 Based Flyswatter

-# http://www.tincantools.com

-

-#interface

-interface ft2232

-ft2232_device_desc "Flyswatter"

-ft2232_layout "flyswatter"

-ft2232_vid_pid 0x0403 0x6010

-jtag_speed 1

+# Interface Configuration for the TinCanTools FT2232 Based Flyswatter
+# http://www.tincantools.com
+
+#interface
+interface ft2232
+ft2232_device_desc "Flyswatter"
+ft2232_layout "flyswatter"
+ft2232_vid_pid 0x0403 0x6010
+jtag_speed 1
diff --git a/src/target/target/hammer.cfg b/src/target/target/hammer.cfg
index 2738e5bb..0a493afb 100644
--- a/src/target/target/hammer.cfg
+++ b/src/target/target/hammer.cfg
@@ -1,28 +1,28 @@
-# Target Configuration for the TinCanTools S3C2410 Based Hammer Module

-# http://www.tincantools.com

-

-#use combined on interfaces or targets that can't set TRST/SRST separately

-reset_config trst_and_srst

-

-#jtag scan chain

-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)

-jtag_device 4 0x1 0xf 0xe

-

-

-#target configuration

-daemon_startup reset

-#target <type> <endianess> <reset mode>

-target arm920t little run_and_init 0 arm920t

-

-# speed up memory downloads

-arm7 fast_memory_access enable

-arm7_9 dcc_downloads enable

-

-target_script 0 reset event/hammer_reset.script

-

-working_area 0 0x30800000 0x20000 nobackup

-run_and_halt_time 0 1000

-

-#flash configuration

-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]

-flash bank cfi 0x00000000 0x1000000 2 2 0

+# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
+# http://www.tincantools.com
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+
+#target configuration
+daemon_startup reset
+#target <type> <endianess> <reset mode>
+target arm920t little run_and_init 0 arm920t
+
+# speed up memory downloads
+arm7 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+target_script 0 reset event/hammer_reset.script
+
+working_area 0 0x30800000 0x20000 nobackup
+run_and_halt_time 0 1000
+
+#flash configuration
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+flash bank cfi 0x00000000 0x1000000 2 2 0